Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 0/2] iio: add driver for Bosch BMA400 accelerometer
@ 2019-10-12 19:25 Dan Robertson
  2019-10-12 19:25 ` [PATCH v3 1/2] dt-bindings: iio: accel: bma400: add bindings Dan Robertson
  2019-10-12 19:25 ` [PATCH v3 2/2] iio: (bma400) add driver for the BMA400 Dan Robertson
  0 siblings, 2 replies; 9+ messages in thread
From: Dan Robertson @ 2019-10-12 19:25 UTC (permalink / raw)
  To: Jonathan Cameron, linux-iio, Peter Meerwald-Stadler
  Cc: Andy Shevchenko, devicetree, Hartmut Knaack, Rob Herring,
	Mark Rutland, linux-kernel, Dan Robertson

This patchset adds a IIO driver for the Bosch BMA400 3-axes ultra low-power
accelerometer.  The initial implementation of the driver adds read support for
the acceleration and temperature data registers. The driver also has support
for reading and writing to the output data rate, oversampling ratio, and scale
configuration registers.

Version 3 implements the feedback from reviewers of the v2 patchset.

Cheers,

 - Dan

Changes in v3:

 * Use yaml format for DT bindings
 * Remove strict dependency on OF
 * Tidy Kconfig dependencies
 * Stylistic changes
 * Do not soft-reset device on remove

Changes in v2:

 * Implemented iio_info -> read_avail
 * Stylistic changes
 * Implemented devicetree bindings

Dan Robertson (2):
  dt-bindings: iio: accel: bma400: add bindings
  iio: (bma400) add driver for the BMA400

 .../devicetree/bindings/iio/accel/bma400.yaml |  39 +
 drivers/iio/accel/Kconfig                     |  18 +
 drivers/iio/accel/Makefile                    |   2 +
 drivers/iio/accel/bma400.h                    |  80 ++
 drivers/iio/accel/bma400_core.c               | 788 ++++++++++++++++++
 drivers/iio/accel/bma400_i2c.c                |  60 ++
 6 files changed, 987 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/bma400.yaml
 create mode 100644 drivers/iio/accel/bma400.h
 create mode 100644 drivers/iio/accel/bma400_core.c
 create mode 100644 drivers/iio/accel/bma400_i2c.c

-- 
2.23.0




^ permalink raw reply	[flat|nested] 9+ messages in thread
* [PATCH v3 0/2] iio: add driver for Bosch BMA400 accelerometer
@ 2019-10-18  3:18 Dan Robertson
  0 siblings, 0 replies; 9+ messages in thread
From: Dan Robertson @ 2019-10-18  3:18 UTC (permalink / raw)
  To: Jonathan Cameron, linux-iio, Peter Meerwald-Stadler
  Cc: Andy Shevchenko, devicetree, Hartmut Knaack, Rob Herring,
	Mark Rutland, linux-kernel, Randy Dunlap, Dan Robertson

This patchset adds a IIO driver for the Bosch BMA400 3-axes ultra low-power
accelerometer. The initial implementation of the driver adds read support for
the acceleration and temperature data registers. The driver also has support
for reading and writing to the output data rate, oversampling ratio, and scale
configuration registers.

I've ran some basic tests with libiio and I've run the device tree checks. Are
there other tests that are recommended to be run for a new device?

Thanks again for the reviews!

Cheers,

 - Dan


Changes in v4:

 * Fix error in DT bindings
 * Fix typo when setting the OSR
 * Simplified the cached sample frequency
 * Fix the MODULE_LICENSE

Changes in v3:

 * Use yaml format for DT bindings
 * Remove strict dependency on OF
 * Tidy Kconfig dependencies
 * Stylistic changes
 * Do not soft-reset device on remove

Changes in v2:

 * Implemented iio_info -> read_avail
 * Stylistic changes
 * Implemented devicetree bindings


Dan Robertson (2):
  dt-bindings: iio: accel: bma400: add bindings
  iio: (bma400) add driver for the BMA400

 .../devicetree/bindings/iio/accel/bma400.yaml |  39 +
 drivers/iio/accel/Kconfig                     |  18 +
 drivers/iio/accel/Makefile                    |   2 +
 drivers/iio/accel/bma400.h                    |  85 ++
 drivers/iio/accel/bma400_core.c               | 796 ++++++++++++++++++
 drivers/iio/accel/bma400_i2c.c                |  60 ++
 6 files changed, 1000 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/bma400.yaml
 create mode 100644 drivers/iio/accel/bma400.h
 create mode 100644 drivers/iio/accel/bma400_core.c
 create mode 100644 drivers/iio/accel/bma400_i2c.c




^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-12 19:25 [PATCH v3 0/2] iio: add driver for Bosch BMA400 accelerometer Dan Robertson
2019-10-12 19:25 ` [PATCH v3 1/2] dt-bindings: iio: accel: bma400: add bindings Dan Robertson
2019-10-14 17:15   ` Rob Herring
2019-10-14 17:27     ` Dan Robertson
2019-10-15  1:17       ` Dan Robertson
2019-10-12 19:25 ` [PATCH v3 2/2] iio: (bma400) add driver for the BMA400 Dan Robertson
2019-10-12 20:31   ` Randy Dunlap
2019-10-12 20:58     ` Dan Robertson
2019-10-18  3:18 [PATCH v3 0/2] iio: add driver for Bosch BMA400 accelerometer Dan Robertson

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git