Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
From: Rob Herring <robh@kernel.org>
To: Dan Robertson <dan@dlrobertson.com>
Cc: Jonathan Cameron <jic23@kernel.org>,
	linux-iio@vger.kernel.org,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	devicetree@vger.kernel.org, Hartmut Knaack <knaack.h@gmx.de>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/2] dt-bindings: iio: accel: bma400: add bindings
Date: Mon, 14 Oct 2019 12:15:21 -0500
Message-ID: <20191014171521.GA29335@bogus> (raw)
In-Reply-To: <20191012192525.21040-2-dan@dlrobertson.com>

On Sat, Oct 12, 2019 at 07:25:24PM +0000, Dan Robertson wrote:
> Add devicetree binding for the Bosch BMA400 3-axes ultra-low power
> accelerometer sensor.
> 
> Signed-off-by: Dan Robertson <dan@dlrobertson.com>
> ---
>  .../devicetree/bindings/iio/accel/bma400.yaml | 39 +++++++++++++++++++
>  1 file changed, 39 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/bma400.yaml

Fails 'make dt_binding_check':

Documentation/devicetree/bindings/iio/accel/bma400.example.dts:22.13-26: 
Warning (reg_format): /example-0/i2c0/bma400@14:reg: property has 
invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/iio/accel/bma400.example.dt.yaml: 
Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/accel/bma400.example.dt.yaml: 
Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/accel/bma400.example.dt.yaml: 
Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/bma400.example.dt.yaml: 
i2c0: #size-cells:0:0: 0 was expected


> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bma400.yaml
> new file mode 100644
> index 000000000000..31dceac89ace
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/bma400.yaml
> @@ -0,0 +1,39 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accel/bma400.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bosch BMA400 triaxial acceleration sensor
> +
> +maintainers:
> +  - Dan Robertson <dan@dlrobertson.com>
> +
> +description: |
> +  Acceleration and temerature iio sensors with an i2c interface
> +
> +  Specifications about the sensor can be found at:
> +    https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - bosch,bma400
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    i2c0 {
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +      bma400@14 {
> +        compatible = "bosch,bma400";
> +        reg = <0x14>;
> +      };
> +    };
> -- 
> 2.23.0
> 
> 
> 

  reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-12 19:25 [PATCH v3 0/2] iio: add driver for Bosch BMA400 accelerometer Dan Robertson
2019-10-12 19:25 ` [PATCH v3 1/2] dt-bindings: iio: accel: bma400: add bindings Dan Robertson
2019-10-14 17:15   ` Rob Herring [this message]
2019-10-14 17:27     ` Dan Robertson
2019-10-15  1:17       ` Dan Robertson
2019-10-12 19:25 ` [PATCH v3 2/2] iio: (bma400) add driver for the BMA400 Dan Robertson
2019-10-12 20:31   ` Randy Dunlap
2019-10-12 20:58     ` Dan Robertson

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191014171521.GA29335@bogus \
    --to=robh@kernel.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=dan@dlrobertson.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git