From: Gwendal Grignou <gwendal@chromium.org>
To: briannorris@chromium.org, jic23@kernel.org, knaack.h@gmx.de,
lars@metafoo.de, pmeerw@pmeerw.net, lee.jones@linaro.org,
bleung@chromium.org, enric.balletbo@collabora.com,
dianders@chromium.org, groeck@chromium.org,
fabien.lahoudere@collabora.com
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
Gwendal Grignou <gwendal@chromium.org>
Subject: [PATCH v2 01/18] platform: chrome: Put docs with the code
Date: Sun, 20 Oct 2019 22:53:46 -0700 [thread overview]
Message-ID: <20191021055403.67849-2-gwendal@chromium.org> (raw)
In-Reply-To: <20191021055403.67849-1-gwendal@chromium.org>
To avoid doc rot, put function documentations with code, not header.
Use kernel-doc style comments for exported functions.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
New in v2.
drivers/platform/chrome/cros_ec.c | 33 +++++++
drivers/platform/chrome/cros_ec_proto.c | 70 +++++++++++++
include/linux/platform_data/cros_ec_proto.h | 103 --------------------
3 files changed, 103 insertions(+), 103 deletions(-)
diff --git a/drivers/platform/chrome/cros_ec.c b/drivers/platform/chrome/cros_ec.c
index fd77e6fa74c2c..9b2d07422e175 100644
--- a/drivers/platform/chrome/cros_ec.c
+++ b/drivers/platform/chrome/cros_ec.c
@@ -104,6 +104,15 @@ static int cros_ec_sleep_event(struct cros_ec_device *ec_dev, u8 sleep_event)
return ret;
}
+/**
+ * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
+ * @ec_dev: Device to register.
+ *
+ * Before calling this, allocate a pointer to a new device and then fill
+ * in all the fields up to the --private-- marker.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_register(struct cros_ec_device *ec_dev)
{
struct device *dev = ec_dev->dev;
@@ -198,6 +207,14 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
}
EXPORT_SYMBOL(cros_ec_register);
+/**
+ * cros_ec_unregister() - Remove a ChromeOS EC.
+ * @ec_dev: Device to unregister.
+ *
+ * Call this to deregister a ChromeOS EC, then clean up any private data.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_unregister(struct cros_ec_device *ec_dev)
{
if (ec_dev->pd)
@@ -209,6 +226,14 @@ int cros_ec_unregister(struct cros_ec_device *ec_dev)
EXPORT_SYMBOL(cros_ec_unregister);
#ifdef CONFIG_PM_SLEEP
+/**
+ * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
+ * @ec_dev: Device to suspend.
+ *
+ * This can be called by drivers to handle a suspend event.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_suspend(struct cros_ec_device *ec_dev)
{
struct device *dev = ec_dev->dev;
@@ -243,6 +268,14 @@ static void cros_ec_report_events_during_suspend(struct cros_ec_device *ec_dev)
1, ec_dev);
}
+/**
+ * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
+ * @ec_dev: Device to resume.
+ *
+ * This can be called by drivers to handle a resume event.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_resume(struct cros_ec_device *ec_dev)
{
int ret;
diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
index f659f96bda128..7db58771ec77c 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -117,6 +117,17 @@ static int send_command(struct cros_ec_device *ec_dev,
return ret;
}
+/**
+ * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
+ * @ec_dev: Device to register.
+ * @msg: Message to write.
+ *
+ * This is intended to be used by all ChromeOS EC drivers, but at present
+ * only SPI uses it. Once LPC uses the same protocol it can start using it.
+ * I2C could use it now, with a refactor of the existing code.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg)
{
@@ -141,6 +152,16 @@ int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
}
EXPORT_SYMBOL(cros_ec_prepare_tx);
+/**
+ * cros_ec_check_result() - Check ec_msg->result.
+ * @ec_dev: EC device.
+ * @msg: Message to check.
+ *
+ * This is used by ChromeOS EC drivers to check the ec_msg->result for
+ * errors and to warn about them.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_check_result(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg)
{
@@ -326,6 +347,13 @@ static int cros_ec_get_host_command_version_mask(struct cros_ec_device *ec_dev,
return ret;
}
+/**
+ * cros_ec_query_all() - Query the protocol version supported by the
+ * ChromeOS EC.
+ * @ec_dev: Device to register.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_query_all(struct cros_ec_device *ec_dev)
{
struct device *dev = ec_dev->dev;
@@ -453,6 +481,16 @@ int cros_ec_query_all(struct cros_ec_device *ec_dev)
}
EXPORT_SYMBOL(cros_ec_query_all);
+/**
+ * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
+ * @ec_dev: EC device.
+ * @msg: Message to write.
+ *
+ * Call this to send a command to the ChromeOS EC. This should be used
+ * instead of calling the EC's cmd_xfer() callback directly.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg)
{
@@ -500,6 +538,18 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
}
EXPORT_SYMBOL(cros_ec_cmd_xfer);
+/**
+ * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
+ * @ec_dev: EC device.
+ * @msg: Message to write.
+ *
+ * This function is identical to cros_ec_cmd_xfer, except it returns success
+ * status only if both the command was transmitted successfully and the EC
+ * replied with success status. It's not necessary to check msg->result when
+ * using this function.
+ *
+ * Return: The number of bytes transferred on success or negative error code.
+ */
int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg)
{
@@ -584,6 +634,16 @@ static int get_keyboard_state_event(struct cros_ec_device *ec_dev)
return ec_dev->event_size;
}
+/**
+ * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
+ * @ec_dev: Device to fetch event from.
+ * @wake_event: Pointer to a bool set to true upon return if the event might be
+ * treated as a wake event. Ignored if null.
+ *
+ * Return: negative error code on errors; 0 for no data; or else number of
+ * bytes received (i.e., an event was retrieved successfully). Event types are
+ * written out to @ec_dev->event_data.event_type on success.
+ */
int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event)
{
u8 event_type;
@@ -628,6 +688,16 @@ int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event)
}
EXPORT_SYMBOL(cros_ec_get_next_event);
+/**
+ * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
+ * @ec_dev: Device to fetch event from.
+ *
+ * When MKBP is supported, when the EC raises an interrupt, we collect the
+ * events raised and call the functions in the ec notifier. This function
+ * is a helper to know which events are raised.
+ *
+ * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
+ */
u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev)
{
u32 host_event;
diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
index eab7036cda090..0d4e4aaed37af 100644
--- a/include/linux/platform_data/cros_ec_proto.h
+++ b/include/linux/platform_data/cros_ec_proto.h
@@ -187,133 +187,30 @@ struct cros_ec_platform {
u16 cmd_offset;
};
-/**
- * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
- * @ec_dev: Device to suspend.
- *
- * This can be called by drivers to handle a suspend event.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_suspend(struct cros_ec_device *ec_dev);
-/**
- * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
- * @ec_dev: Device to resume.
- *
- * This can be called by drivers to handle a resume event.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_resume(struct cros_ec_device *ec_dev);
-/**
- * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
- * @ec_dev: Device to register.
- * @msg: Message to write.
- *
- * This is intended to be used by all ChromeOS EC drivers, but at present
- * only SPI uses it. Once LPC uses the same protocol it can start using it.
- * I2C could use it now, with a refactor of the existing code.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg);
-/**
- * cros_ec_check_result() - Check ec_msg->result.
- * @ec_dev: EC device.
- * @msg: Message to check.
- *
- * This is used by ChromeOS EC drivers to check the ec_msg->result for
- * errors and to warn about them.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_check_result(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg);
-/**
- * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
- * @ec_dev: EC device.
- * @msg: Message to write.
- *
- * Call this to send a command to the ChromeOS EC. This should be used
- * instead of calling the EC's cmd_xfer() callback directly.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg);
-/**
- * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
- * @ec_dev: EC device.
- * @msg: Message to write.
- *
- * This function is identical to cros_ec_cmd_xfer, except it returns success
- * status only if both the command was transmitted successfully and the EC
- * replied with success status. It's not necessary to check msg->result when
- * using this function.
- *
- * Return: The number of bytes transferred on success or negative error code.
- */
int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg);
-/**
- * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
- * @ec_dev: Device to register.
- *
- * Before calling this, allocate a pointer to a new device and then fill
- * in all the fields up to the --private-- marker.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_register(struct cros_ec_device *ec_dev);
-/**
- * cros_ec_unregister() - Remove a ChromeOS EC.
- * @ec_dev: Device to unregister.
- *
- * Call this to deregister a ChromeOS EC, then clean up any private data.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_unregister(struct cros_ec_device *ec_dev);
-/**
- * cros_ec_query_all() - Query the protocol version supported by the
- * ChromeOS EC.
- * @ec_dev: Device to register.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_query_all(struct cros_ec_device *ec_dev);
-/**
- * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
- * @ec_dev: Device to fetch event from.
- * @wake_event: Pointer to a bool set to true upon return if the event might be
- * treated as a wake event. Ignored if null.
- *
- * Return: negative error code on errors; 0 for no data; or else number of
- * bytes received (i.e., an event was retrieved successfully). Event types are
- * written out to @ec_dev->event_data.event_type on success.
- */
int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
-/**
- * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
- * @ec_dev: Device to fetch event from.
- *
- * When MKBP is supported, when the EC raises an interrupt, we collect the
- * events raised and call the functions in the ec notifier. This function
- * is a helper to know which events are raised.
- *
- * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
- */
u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
#endif /* __LINUX_CROS_EC_PROTO_H */
--
2.23.0.866.gb869b98d4c-goog
next prev parent reply other threads:[~2019-10-21 5:55 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-21 5:53 [PATCH v2 00/18] cros_ec: Add sensorhub driver and FIFO processing*** SUBJECT HERE Gwendal Grignou
2019-10-21 5:53 ` Gwendal Grignou [this message]
2019-10-21 15:31 ` [PATCH v2 01/18] platform: chrome: Put docs with the code Jonathan Cameron
2019-10-24 17:03 ` Enric Balletbo i Serra
2019-10-21 5:53 ` [PATCH v2 02/18] mfd: cros_ec: Add sensor_count and make check_features public Gwendal Grignou
2019-10-21 15:12 ` Enric Balletbo i Serra
2019-10-21 15:49 ` Jonathan Cameron
2019-11-01 9:00 ` Lee Jones
2019-10-21 5:53 ` [PATCH v2 03/18] platform: cros_ec: Add cros_ec_sensor_hub driver Gwendal Grignou
2019-10-21 15:59 ` Jonathan Cameron
2019-10-22 8:32 ` Enric Balletbo i Serra
2019-10-21 5:53 ` [PATCH v2 04/18] platform/mfd:iio: cros_ec: Register sensor through sensorhub Gwendal Grignou
2019-10-21 16:00 ` Jonathan Cameron
2019-10-22 9:39 ` Enric Balletbo i Serra
2019-10-21 5:53 ` [PATCH v2 05/18] platform: chrome: cros-ec: record event timestamp in the hard irq Gwendal Grignou
2019-10-22 10:03 ` Enric Balletbo i Serra
2019-10-21 5:53 ` [PATCH v2 06/18] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number Gwendal Grignou
2019-10-22 10:05 ` Enric Balletbo i Serra
2019-10-21 5:53 ` [PATCH v2 07/18] platform: chrome: cros_ec: handle MKBP more events flag Gwendal Grignou
2019-10-21 16:07 ` Jonathan Cameron
2019-10-21 5:53 ` [PATCH v2 08/18] Revert "Input: cros_ec_keyb - add back missing mask for event_type" Gwendal Grignou
2019-10-21 5:53 ` [PATCH v2 09/18] Revert "Input: cros_ec_keyb: mask out extra flags in event_type" Gwendal Grignou
2019-10-21 5:53 ` [PATCH v2 10/18] platform: chrome: sensorhub: Add FIFO support Gwendal Grignou
2019-10-21 16:27 ` Jonathan Cameron
2019-10-21 22:09 ` Gwendal Grignou
2019-10-22 10:42 ` Jonathan Cameron
2019-10-21 5:53 ` [PATCH v2 11/18] platform: chrome: sensorhub: Add code to spread timestmap Gwendal Grignou
2019-10-21 5:53 ` [PATCH v2 12/18] platform: chrome: sensorhub: Add median filter Gwendal Grignou
2019-10-21 5:53 ` [PATCH v2 13/18] iio: cros_ec: Move function description to .c file Gwendal Grignou
2019-10-21 16:33 ` Jonathan Cameron
2019-10-21 5:53 ` [PATCH v2 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO Gwendal Grignou
2019-10-21 16:38 ` Jonathan Cameron
2019-10-21 5:54 ` [PATCH v2 15/18] iio: cros_ec: Remove pm function Gwendal Grignou
2019-10-21 16:39 ` Jonathan Cameron
2019-10-21 5:54 ` [PATCH v2 16/18] iio: cros_ec: Expose hwfifo_timeout Gwendal Grignou
2019-10-21 16:42 ` Jonathan Cameron
2019-10-21 5:54 ` [PATCH v2 17/18] iio: cros_ec: Report hwfifo_watermark_max Gwendal Grignou
2019-10-21 16:42 ` Jonathan Cameron
2019-10-21 5:54 ` [PATCH v2 18/18] iio: cros_ec: Use Hertz as unit for sampling frequency Gwendal Grignou
2019-10-21 16:45 ` Jonathan Cameron
2019-10-22 19:11 ` Gwendal Grignou
2019-10-21 15:29 ` [PATCH v2 00/18] cros_ec: Add sensorhub driver and FIFO processing*** SUBJECT HERE Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191021055403.67849-2-gwendal@chromium.org \
--to=gwendal@chromium.org \
--cc=bleung@chromium.org \
--cc=briannorris@chromium.org \
--cc=dianders@chromium.org \
--cc=enric.balletbo@collabora.com \
--cc=fabien.lahoudere@collabora.com \
--cc=groeck@chromium.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).