From: Jonathan Cameron <jic23@kernel.org>
To: Gwendal Grignou <gwendal@chromium.org>
Cc: briannorris@chromium.org, knaack.h@gmx.de, lars@metafoo.de,
pmeerw@pmeerw.net, lee.jones@linaro.org, bleung@chromium.org,
enric.balletbo@collabora.com, dianders@chromium.org,
groeck@chromium.org, fabien.lahoudere@collabora.com,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org
Subject: Re: [PATCH v2 16/18] iio: cros_ec: Expose hwfifo_timeout
Date: Mon, 21 Oct 2019 17:42:04 +0100 [thread overview]
Message-ID: <20191021174204.2d8620b2@archlinux> (raw)
In-Reply-To: <20191021055403.67849-17-gwendal@chromium.org>
On Sun, 20 Oct 2019 22:54:01 -0700
Gwendal Grignou <gwendal@chromium.org> wrote:
> Expose EC minimal interrupt period through buffer/hwfifo_timeout:
> - Maximal timeout is limited to 65s.
> - When timeout for all sensors is set to 0, EC will not send events,
> even if the sensor sampling rate is greater than 0.
> - curr_sample_rate is no more, the pm functions have been removed.
>
> Rename frequency to sampling_frequency to match IIO ABI.
>
> Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
I'm keen to see this change, but what is your feeling on the likelihood
anyone will notice that we just changed the ABI for these devices?
Normally I let that go on for cases like this where we are bringing
it inline with the 'correct' ABI..
Assuming that's fine,
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
> Changes in v2:
> - Register fifo_attributes in sensors drivers that previously advertise
> that feature.
>
>
> .../common/cros_ec_sensors/cros_ec_sensors.c | 4 +-
> .../cros_ec_sensors/cros_ec_sensors_core.c | 95 ++++++++++++++-----
> drivers/iio/light/cros_ec_light_prox.c | 6 +-
> drivers/iio/pressure/cros_ec_baro.c | 6 +-
> .../linux/iio/common/cros_ec_sensors_core.h | 4 +-
> 5 files changed, 85 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> index 2eb4bb254fbde..8c57a3ade78ed 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> @@ -236,6 +236,9 @@ static int cros_ec_sensors_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + iio_buffer_set_attrs(indio_dev->buffer,
> + cros_ec_sensor_fifo_attributes);
> +
> indio_dev->info = &ec_sensors_info;
> state = iio_priv(indio_dev);
> for (channel = state->channels, i = CROS_EC_SENSOR_X;
> @@ -247,7 +250,6 @@ static int cros_ec_sensors_probe(struct platform_device *pdev)
> BIT(IIO_CHAN_INFO_CALIBSCALE);
> channel->info_mask_shared_by_all =
> BIT(IIO_CHAN_INFO_SCALE) |
> - BIT(IIO_CHAN_INFO_FREQUENCY) |
> BIT(IIO_CHAN_INFO_SAMP_FREQ);
> channel->info_mask_shared_by_all_available =
> BIT(IIO_CHAN_INFO_SAMP_FREQ);
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> index e89c355bb4b35..92128c67a166e 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> @@ -11,6 +11,7 @@
> #include <linux/iio/common/cros_ec_sensors_core.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/kfifo_buf.h>
> +#include <linux/iio/sysfs.h>
> #include <linux/iio/trigger_consumer.h>
> #include <linux/iio/triggered_buffer.h>
> #include <linux/kernel.h>
> @@ -84,6 +85,77 @@ static void get_default_min_max_freq(enum motionsensor_type type,
> }
> }
>
> +static int cros_ec_sensor_set_ec_rate(struct cros_ec_sensors_core_state *st,
> + int rate)
> +{
> + int ret;
> +
> + if (rate > U16_MAX)
> + rate = U16_MAX;
> +
> + mutex_lock(&st->cmd_lock);
> + st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
> + st->param.ec_rate.data = rate;
> + ret = cros_ec_motion_send_host_cmd(st, 0);
> + mutex_unlock(&st->cmd_lock);
> + return ret;
> +}
> +
> +static ssize_t cros_ec_sensor_set_report_latency(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
> + int integer, fract, ret;
> + int latency;
> +
> + ret = iio_str_to_fixpoint(buf, 100000, &integer, &fract);
> + if (ret)
> + return ret;
> +
> + /* EC rate is in ms. */
> + latency = integer * 1000 + fract / 1000;
> + ret = cros_ec_sensor_set_ec_rate(st, latency);
> + if (ret < 0)
> + return ret;
> +
> + return len;
> +}
> +
> +static ssize_t cros_ec_sensor_get_report_latency(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
> + int latency, ret;
> +
> + mutex_lock(&st->cmd_lock);
> + st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
> + st->param.ec_rate.data = EC_MOTION_SENSE_NO_VALUE;
> +
> + ret = cros_ec_motion_send_host_cmd(st, 0);
> + latency = st->resp->ec_rate.ret;
> + mutex_unlock(&st->cmd_lock);
> + if (ret < 0)
> + return ret;
> +
> + return sprintf(buf, "%d.%06u\n",
> + latency / 1000,
> + (latency % 1000) * 1000);
> +}
> +
> +static IIO_DEVICE_ATTR(hwfifo_timeout, 0644,
> + cros_ec_sensor_get_report_latency,
> + cros_ec_sensor_set_report_latency, 0);
> +
> +const struct attribute *cros_ec_sensor_fifo_attributes[] = {
> + &iio_dev_attr_hwfifo_timeout.dev_attr.attr,
> + NULL,
> +};
> +EXPORT_SYMBOL_GPL(cros_ec_sensor_fifo_attributes);
> +
> int cros_ec_sensors_push_data(
> struct iio_dev *indio_dev,
> s16 *data,
> @@ -609,18 +681,6 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
>
> switch (mask) {
> case IIO_CHAN_INFO_SAMP_FREQ:
> - st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
> - st->param.ec_rate.data =
> - EC_MOTION_SENSE_NO_VALUE;
> -
> - ret = cros_ec_motion_send_host_cmd(st, 0);
> - if (ret)
> - break;
> -
> - *val = st->resp->ec_rate.ret;
> - ret = IIO_VAL_INT;
> - break;
> - case IIO_CHAN_INFO_FREQUENCY:
> st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
> st->param.sensor_odr.data =
> EC_MOTION_SENSE_NO_VALUE;
> @@ -690,7 +750,7 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
> int ret;
>
> switch (mask) {
> - case IIO_CHAN_INFO_FREQUENCY:
> + case IIO_CHAN_INFO_SAMP_FREQ:
> st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
> st->param.sensor_odr.data = val;
>
> @@ -699,15 +759,6 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
>
> ret = cros_ec_motion_send_host_cmd(st, 0);
> break;
> - case IIO_CHAN_INFO_SAMP_FREQ:
> - st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
> - st->param.ec_rate.data = val;
> -
> - ret = cros_ec_motion_send_host_cmd(st, 0);
> - if (ret)
> - break;
> - st->curr_sampl_freq = val;
> - break;
> default:
> ret = -EINVAL;
> break;
> diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
> index 6bac02cdd898a..059aaddc91fd8 100644
> --- a/drivers/iio/light/cros_ec_light_prox.c
> +++ b/drivers/iio/light/cros_ec_light_prox.c
> @@ -183,6 +183,9 @@ static int cros_ec_light_prox_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + iio_buffer_set_attrs(indio_dev->buffer,
> + cros_ec_sensor_fifo_attributes);
> +
> indio_dev->info = &cros_ec_light_prox_info;
> state = iio_priv(indio_dev);
> state->core.type = state->core.resp->info.type;
> @@ -191,8 +194,7 @@ static int cros_ec_light_prox_probe(struct platform_device *pdev)
>
> /* Common part */
> channel->info_mask_shared_by_all =
> - BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> - BIT(IIO_CHAN_INFO_FREQUENCY);
> + BIT(IIO_CHAN_INFO_SAMP_FREQ);
> channel->info_mask_shared_by_all_available =
> BIT(IIO_CHAN_INFO_SAMP_FREQ);
> channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
> diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
> index fb7daeb4b29f9..e933a1bb64d4b 100644
> --- a/drivers/iio/pressure/cros_ec_baro.c
> +++ b/drivers/iio/pressure/cros_ec_baro.c
> @@ -139,6 +139,9 @@ static int cros_ec_baro_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + iio_buffer_set_attrs(indio_dev->buffer,
> + cros_ec_sensor_fifo_attributes);
> +
> indio_dev->info = &cros_ec_baro_info;
> state = iio_priv(indio_dev);
> state->core.type = state->core.resp->info.type;
> @@ -148,8 +151,7 @@ static int cros_ec_baro_probe(struct platform_device *pdev)
> channel->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
> channel->info_mask_shared_by_all =
> BIT(IIO_CHAN_INFO_SCALE) |
> - BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> - BIT(IIO_CHAN_INFO_FREQUENCY);
> + BIT(IIO_CHAN_INFO_SAMP_FREQ);
> channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
> channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
> channel->scan_type.shift = 0;
> diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
> index db3da7ffcc376..387ca9e61dac8 100644
> --- a/include/linux/iio/common/cros_ec_sensors_core.h
> +++ b/include/linux/iio/common/cros_ec_sensors_core.h
> @@ -51,7 +51,6 @@ typedef irqreturn_t (*cros_ec_sensors_capture_t)(int irq, void *p);
> * the timestamp. The timestamp is always last and
> * is always 8-byte aligned.
> * @read_ec_sensors_data: function used for accessing sensors values
> - * @cuur_sampl_freq: current sampling period
> */
> struct cros_ec_sensors_core_state {
> struct cros_ec_device *ec;
> @@ -74,8 +73,6 @@ struct cros_ec_sensors_core_state {
> int (*read_ec_sensors_data)(struct iio_dev *indio_dev,
> unsigned long scan_mask, s16 *data);
>
> - int curr_sampl_freq;
> -
> /* Table of known available frequencies : 0, Min and Max in mHz */
> int frequencies[3];
> };
> @@ -118,5 +115,6 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
>
> /* List of extended channel specification for all sensors */
> extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[];
> +extern const struct attribute *cros_ec_sensor_fifo_attributes[];
>
> #endif /* __CROS_EC_SENSORS_CORE_H */
next prev parent reply other threads:[~2019-10-21 16:42 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-21 5:53 [PATCH v2 00/18] cros_ec: Add sensorhub driver and FIFO processing*** SUBJECT HERE Gwendal Grignou
2019-10-21 5:53 ` [PATCH v2 01/18] platform: chrome: Put docs with the code Gwendal Grignou
2019-10-21 15:31 ` Jonathan Cameron
2019-10-24 17:03 ` Enric Balletbo i Serra
2019-10-21 5:53 ` [PATCH v2 02/18] mfd: cros_ec: Add sensor_count and make check_features public Gwendal Grignou
2019-10-21 15:12 ` Enric Balletbo i Serra
2019-10-21 15:49 ` Jonathan Cameron
2019-11-01 9:00 ` Lee Jones
2019-10-21 5:53 ` [PATCH v2 03/18] platform: cros_ec: Add cros_ec_sensor_hub driver Gwendal Grignou
2019-10-21 15:59 ` Jonathan Cameron
2019-10-22 8:32 ` Enric Balletbo i Serra
2019-10-21 5:53 ` [PATCH v2 04/18] platform/mfd:iio: cros_ec: Register sensor through sensorhub Gwendal Grignou
2019-10-21 16:00 ` Jonathan Cameron
2019-10-22 9:39 ` Enric Balletbo i Serra
2019-10-21 5:53 ` [PATCH v2 05/18] platform: chrome: cros-ec: record event timestamp in the hard irq Gwendal Grignou
2019-10-22 10:03 ` Enric Balletbo i Serra
2019-10-21 5:53 ` [PATCH v2 06/18] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number Gwendal Grignou
2019-10-22 10:05 ` Enric Balletbo i Serra
2019-10-21 5:53 ` [PATCH v2 07/18] platform: chrome: cros_ec: handle MKBP more events flag Gwendal Grignou
2019-10-21 16:07 ` Jonathan Cameron
2019-10-21 5:53 ` [PATCH v2 08/18] Revert "Input: cros_ec_keyb - add back missing mask for event_type" Gwendal Grignou
2019-10-21 5:53 ` [PATCH v2 09/18] Revert "Input: cros_ec_keyb: mask out extra flags in event_type" Gwendal Grignou
2019-10-21 5:53 ` [PATCH v2 10/18] platform: chrome: sensorhub: Add FIFO support Gwendal Grignou
2019-10-21 16:27 ` Jonathan Cameron
2019-10-21 22:09 ` Gwendal Grignou
2019-10-22 10:42 ` Jonathan Cameron
2019-10-21 5:53 ` [PATCH v2 11/18] platform: chrome: sensorhub: Add code to spread timestmap Gwendal Grignou
2019-10-21 5:53 ` [PATCH v2 12/18] platform: chrome: sensorhub: Add median filter Gwendal Grignou
2019-10-21 5:53 ` [PATCH v2 13/18] iio: cros_ec: Move function description to .c file Gwendal Grignou
2019-10-21 16:33 ` Jonathan Cameron
2019-10-21 5:53 ` [PATCH v2 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO Gwendal Grignou
2019-10-21 16:38 ` Jonathan Cameron
2019-10-21 5:54 ` [PATCH v2 15/18] iio: cros_ec: Remove pm function Gwendal Grignou
2019-10-21 16:39 ` Jonathan Cameron
2019-10-21 5:54 ` [PATCH v2 16/18] iio: cros_ec: Expose hwfifo_timeout Gwendal Grignou
2019-10-21 16:42 ` Jonathan Cameron [this message]
2019-10-21 5:54 ` [PATCH v2 17/18] iio: cros_ec: Report hwfifo_watermark_max Gwendal Grignou
2019-10-21 16:42 ` Jonathan Cameron
2019-10-21 5:54 ` [PATCH v2 18/18] iio: cros_ec: Use Hertz as unit for sampling frequency Gwendal Grignou
2019-10-21 16:45 ` Jonathan Cameron
2019-10-22 19:11 ` Gwendal Grignou
2019-10-21 15:29 ` [PATCH v2 00/18] cros_ec: Add sensorhub driver and FIFO processing*** SUBJECT HERE Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191021174204.2d8620b2@archlinux \
--to=jic23@kernel.org \
--cc=bleung@chromium.org \
--cc=briannorris@chromium.org \
--cc=dianders@chromium.org \
--cc=enric.balletbo@collabora.com \
--cc=fabien.lahoudere@collabora.com \
--cc=groeck@chromium.org \
--cc=gwendal@chromium.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).