* [PATCH] iio: st: Drop GPIO include
@ 2019-10-23 8:47 Linus Walleij
2019-10-27 15:56 ` Jonathan Cameron
0 siblings, 1 reply; 2+ messages in thread
From: Linus Walleij @ 2019-10-23 8:47 UTC (permalink / raw)
To: Jonathan Cameron, linux-iio
Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler,
Linus Walleij
None of the ST sensor drivers use any symbols from
<linux/gpio.h>, just drop the include from all of them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/iio/accel/st_accel_core.c | 1 -
drivers/iio/gyro/st_gyro_core.c | 1 -
drivers/iio/magnetometer/st_magn_core.c | 1 -
drivers/iio/pressure/st_pressure_core.c | 1 -
4 files changed, 4 deletions(-)
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 2e37f8a6d8cf..7b837641f166 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -15,7 +15,6 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
-#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index c0acbb5d2ffb..57be68b291fa 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -14,7 +14,6 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
-#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index a3a268ee2896..e68184a93a6d 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -14,7 +14,6 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
-#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index ca6863b32a5f..bd972cec4830 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -14,7 +14,6 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
-#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
--
2.21.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] iio: st: Drop GPIO include
2019-10-23 8:47 [PATCH] iio: st: Drop GPIO include Linus Walleij
@ 2019-10-27 15:56 ` Jonathan Cameron
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Cameron @ 2019-10-27 15:56 UTC (permalink / raw)
To: Linus Walleij
Cc: linux-iio, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler
On Wed, 23 Oct 2019 10:47:02 +0200
Linus Walleij <linus.walleij@linaro.org> wrote:
> None of the ST sensor drivers use any symbols from
> <linux/gpio.h>, just drop the include from all of them.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Applied.
Thanks,
Jonathan
> ---
> drivers/iio/accel/st_accel_core.c | 1 -
> drivers/iio/gyro/st_gyro_core.c | 1 -
> drivers/iio/magnetometer/st_magn_core.c | 1 -
> drivers/iio/pressure/st_pressure_core.c | 1 -
> 4 files changed, 4 deletions(-)
>
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> index 2e37f8a6d8cf..7b837641f166 100644
> --- a/drivers/iio/accel/st_accel_core.c
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -15,7 +15,6 @@
> #include <linux/types.h>
> #include <linux/interrupt.h>
> #include <linux/i2c.h>
> -#include <linux/gpio.h>
> #include <linux/irq.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
> index c0acbb5d2ffb..57be68b291fa 100644
> --- a/drivers/iio/gyro/st_gyro_core.c
> +++ b/drivers/iio/gyro/st_gyro_core.c
> @@ -14,7 +14,6 @@
> #include <linux/types.h>
> #include <linux/interrupt.h>
> #include <linux/i2c.h>
> -#include <linux/gpio.h>
> #include <linux/irq.h>
> #include <linux/delay.h>
> #include <linux/iio/iio.h>
> diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
> index a3a268ee2896..e68184a93a6d 100644
> --- a/drivers/iio/magnetometer/st_magn_core.c
> +++ b/drivers/iio/magnetometer/st_magn_core.c
> @@ -14,7 +14,6 @@
> #include <linux/types.h>
> #include <linux/interrupt.h>
> #include <linux/i2c.h>
> -#include <linux/gpio.h>
> #include <linux/irq.h>
> #include <linux/delay.h>
> #include <linux/iio/iio.h>
> diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
> index ca6863b32a5f..bd972cec4830 100644
> --- a/drivers/iio/pressure/st_pressure_core.c
> +++ b/drivers/iio/pressure/st_pressure_core.c
> @@ -14,7 +14,6 @@
> #include <linux/types.h>
> #include <linux/interrupt.h>
> #include <linux/i2c.h>
> -#include <linux/gpio.h>
> #include <linux/irq.h>
> #include <linux/delay.h>
> #include <linux/iio/iio.h>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-10-27 15:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-23 8:47 [PATCH] iio: st: Drop GPIO include Linus Walleij
2019-10-27 15:56 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).