From: Rob Herring <robh@kernel.org>
To: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Mark Rutland <mark.rutland@arm.com>,
Kent Gustavsson <kent@minoris.se>,
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>,
"David S . Miller" <davem@davemloft.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"Paul E . McKenney" <paulmck@linux.ibm.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
Date: Tue, 5 Nov 2019 21:49:20 -0600 [thread overview]
Message-ID: <20191106034920.GA15882@bogus> (raw)
In-Reply-To: <20191029211142.14650-1-marcus.folkesson@gmail.com>
On Tue, Oct 29, 2019 at 10:11:42PM +0100, Marcus Folkesson wrote:
> Rewrite bindings to use json-schema vocabulary.
>
> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> ---
> .../devicetree/bindings/iio/adc/mcp3911.txt | 30 --------
> .../bindings/iio/adc/microchip,mcp3911.yaml | 72 +++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 73 insertions(+), 31 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> deleted file mode 100644
> index 3071f48fb30b..000000000000
> --- a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -* Microchip MCP3911 Dual channel analog front end (ADC)
> -
> -Required properties:
> - - compatible: Should be "microchip,mcp3911"
> - - reg: SPI chip select number for the device
> -
> -Recommended properties:
> - - spi-max-frequency: Definition as per
> - Documentation/devicetree/bindings/spi/spi-bus.txt.
> - Max frequency for this chip is 20MHz.
> -
> -Optional properties:
> - - clocks: Phandle and clock identifier for sampling clock
> - - interrupt-parent: Phandle to the parent interrupt controller
> - - interrupts: IRQ line for the ADC
> - - microchip,device-addr: Device address when multiple MCP3911 chips are present on the
> - same SPI bus. Valid values are 0-3. Defaults to 0.
> - - vref-supply: Phandle to the external reference voltage supply.
> -
> -Example:
> -adc@0 {
> - compatible = "microchip,mcp3911";
> - reg = <0>;
> - interrupt-parent = <&gpio5>;
> - interrupts = <15 IRQ_TYPE_EDGE_RISING>;
> - spi-max-frequency = <20000000>;
> - microchip,device-addr = <0>;
> - vref-supply = <&vref_reg>;
> - clocks = <&xtal>;
> -};
> diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> new file mode 100644
> index 000000000000..bfcf6a5fb44e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/bindings/iio/adc/microchip,mcp3911.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Microchip MCP3911 Dual channel analog front end (ADC)
> +
> +maintainers:
> + - Marcus Folkesson <marcus.folkesson@gmail.com>
> + - Kent Gustavsson <nedo80@gmail.com>
> +
> +description: |
> + Bindings for the Microchip MCP3911 Dual channel ADC device. Datasheet can be
> + found here: https://ww1.microchip.com/downloads/en/DeviceDoc/20002286C.pdf
> +
> +properties:
> + compatible:
> + enum:
> + - microchip,mcp3911
> +
> + reg:
> + description: SPI chip select number for the device
No need to describe common properties if you have nothing special for
this device to say.
> + maxItems: 1
> +
> + spi-max-frequency:
> + description: |
> + Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt.
Same here.
> + maximum: 20000000
> + maxItems: 1
Not an array, so drop.
> +
> + clocks:
> + description: Phandle and clock identifier for sampling clock
Same comment on descriptions.
> + maxItems: 1
> +
> + interrupts:
> + description: IRQ line of the ADC
> + maxItems: 1
> +
> + microchip,device-addr:
> + description: Device address when multiple MCP3911 chips are present on the same SPI bus.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + - enum: [0, 1, 2, 3]
> + - default: 0
> +
> + vref-supply:
> + description: Phandle to the external reference voltage supply.
> + maxItems: 1
Drop this *-supply is always 1 item.
> +
> +required:
> + - compatible
> + - reg
> +
> +examples:
> + - |
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adc@0 {
> + compatible = "microchip,mcp3911";
> + reg = <0>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <15 2>;
> + spi-max-frequency = <20000000>;
> + microchip,device-addr = <0>;
> + vref-supply = <&vref_reg>;
> + clocks = <&xtal>;
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e51a68bf8ca8..fbccc9d450ff 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10723,7 +10723,7 @@ M: Kent Gustavsson <kent@minoris.se>
> L: linux-iio@vger.kernel.org
> S: Supported
> F: drivers/iio/adc/mcp3911.c
> -F: Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> +F: Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
>
> MICROCHIP NAND DRIVER
> M: Tudor Ambarus <tudor.ambarus@microchip.com>
> --
> 2.23.0
>
next prev parent reply other threads:[~2019-11-06 3:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-29 21:11 [PATCH] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml Marcus Folkesson
2019-11-06 3:49 ` Rob Herring [this message]
2019-11-06 7:49 ` Marcus Folkesson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191106034920.GA15882@bogus \
--to=robh@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=kent@minoris.se \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcus.folkesson@gmail.com \
--cc=mark.rutland@arm.com \
--cc=mchehab+samsung@kernel.org \
--cc=paulmck@linux.ibm.com \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).