Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
@ 2019-10-29 21:11 Marcus Folkesson
  2019-11-06  3:49 ` Rob Herring
  0 siblings, 1 reply; 3+ messages in thread
From: Marcus Folkesson @ 2019-10-29 21:11 UTC (permalink / raw)
  To: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, Rob Herring, Mark Rutland,
	Marcus Folkesson, Kent Gustavsson, Mauro Carvalho Chehab,
	David S . Miller, Greg Kroah-Hartman, Paul E . McKenney
  Cc: linux-iio, devicetree, linux-kernel

Rewrite bindings to use json-schema vocabulary.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---
 .../devicetree/bindings/iio/adc/mcp3911.txt   | 30 --------
 .../bindings/iio/adc/microchip,mcp3911.yaml   | 72 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 73 insertions(+), 31 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iio/adc/mcp3911.txt
 create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
deleted file mode 100644
index 3071f48fb30b..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Microchip MCP3911 Dual channel analog front end (ADC)
-
-Required properties:
- - compatible: Should be "microchip,mcp3911"
- - reg: SPI chip select number for the device
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-	 Documentation/devicetree/bindings/spi/spi-bus.txt.
-	 Max frequency for this chip is 20MHz.
-
-Optional properties:
- - clocks: Phandle and clock identifier for sampling clock
- - interrupt-parent: Phandle to the parent interrupt controller
- - interrupts: IRQ line for the ADC
- - microchip,device-addr: Device address when multiple MCP3911 chips are present on the
-	same SPI bus. Valid values are 0-3. Defaults to 0.
- - vref-supply: Phandle to the external reference voltage supply.
-
-Example:
-adc@0 {
-	compatible = "microchip,mcp3911";
-	reg = <0>;
-	interrupt-parent = <&gpio5>;
-	interrupts = <15 IRQ_TYPE_EDGE_RISING>;
-	spi-max-frequency = <20000000>;
-	microchip,device-addr = <0>;
-	vref-supply = <&vref_reg>;
-	clocks = <&xtal>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
new file mode 100644
index 000000000000..bfcf6a5fb44e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/bindings/iio/adc/microchip,mcp3911.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Microchip MCP3911 Dual channel analog front end (ADC)
+
+maintainers:
+  - Marcus Folkesson <marcus.folkesson@gmail.com>
+  - Kent Gustavsson <nedo80@gmail.com>
+
+description: |
+  Bindings for the Microchip MCP3911 Dual channel ADC device. Datasheet can be
+  found here: https://ww1.microchip.com/downloads/en/DeviceDoc/20002286C.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3911
+
+  reg:
+    description: SPI chip select number for the device
+    maxItems: 1
+
+  spi-max-frequency:
+    description: |
+      Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt.
+    maximum: 20000000
+    maxItems: 1
+
+  clocks:
+    description: Phandle and clock identifier for sampling clock
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line of the ADC
+    maxItems: 1
+
+  microchip,device-addr:
+    description: Device address when multiple MCP3911 chips are present on the same SPI bus.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 2, 3]
+      - default: 0
+
+  vref-supply:
+    description: Phandle to the external reference voltage supply.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "microchip,mcp3911";
+        reg = <0>;
+        interrupt-parent = <&gpio5>;
+        interrupts = <15 2>;
+        spi-max-frequency = <20000000>;
+        microchip,device-addr = <0>;
+        vref-supply = <&vref_reg>;
+        clocks = <&xtal>;
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index e51a68bf8ca8..fbccc9d450ff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10723,7 +10723,7 @@ M:	Kent Gustavsson <kent@minoris.se>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 F:	drivers/iio/adc/mcp3911.c
-F:	Documentation/devicetree/bindings/iio/adc/mcp3911.txt
+F:	Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
 
 MICROCHIP NAND DRIVER
 M:	Tudor Ambarus <tudor.ambarus@microchip.com>
-- 
2.23.0


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
  2019-10-29 21:11 [PATCH] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml Marcus Folkesson
@ 2019-11-06  3:49 ` Rob Herring
  2019-11-06  7:49   ` Marcus Folkesson
  0 siblings, 1 reply; 3+ messages in thread
From: Rob Herring @ 2019-11-06  3:49 UTC (permalink / raw)
  To: Marcus Folkesson
  Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, Mark Rutland, Kent Gustavsson,
	Mauro Carvalho Chehab, David S . Miller, Greg Kroah-Hartman,
	Paul E . McKenney, linux-iio, devicetree, linux-kernel

On Tue, Oct 29, 2019 at 10:11:42PM +0100, Marcus Folkesson wrote:
> Rewrite bindings to use json-schema vocabulary.
> 
> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> ---
>  .../devicetree/bindings/iio/adc/mcp3911.txt   | 30 --------
>  .../bindings/iio/adc/microchip,mcp3911.yaml   | 72 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 73 insertions(+), 31 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/iio/adc/mcp3911.txt
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> deleted file mode 100644
> index 3071f48fb30b..000000000000
> --- a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -* Microchip MCP3911 Dual channel analog front end (ADC)
> -
> -Required properties:
> - - compatible: Should be "microchip,mcp3911"
> - - reg: SPI chip select number for the device
> -
> -Recommended properties:
> - - spi-max-frequency: Definition as per
> -	 Documentation/devicetree/bindings/spi/spi-bus.txt.
> -	 Max frequency for this chip is 20MHz.
> -
> -Optional properties:
> - - clocks: Phandle and clock identifier for sampling clock
> - - interrupt-parent: Phandle to the parent interrupt controller
> - - interrupts: IRQ line for the ADC
> - - microchip,device-addr: Device address when multiple MCP3911 chips are present on the
> -	same SPI bus. Valid values are 0-3. Defaults to 0.
> - - vref-supply: Phandle to the external reference voltage supply.
> -
> -Example:
> -adc@0 {
> -	compatible = "microchip,mcp3911";
> -	reg = <0>;
> -	interrupt-parent = <&gpio5>;
> -	interrupts = <15 IRQ_TYPE_EDGE_RISING>;
> -	spi-max-frequency = <20000000>;
> -	microchip,device-addr = <0>;
> -	vref-supply = <&vref_reg>;
> -	clocks = <&xtal>;
> -};
> diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> new file mode 100644
> index 000000000000..bfcf6a5fb44e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/bindings/iio/adc/microchip,mcp3911.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Microchip MCP3911 Dual channel analog front end (ADC)
> +
> +maintainers:
> +  - Marcus Folkesson <marcus.folkesson@gmail.com>
> +  - Kent Gustavsson <nedo80@gmail.com>
> +
> +description: |
> +  Bindings for the Microchip MCP3911 Dual channel ADC device. Datasheet can be
> +  found here: https://ww1.microchip.com/downloads/en/DeviceDoc/20002286C.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - microchip,mcp3911
> +
> +  reg:
> +    description: SPI chip select number for the device

No need to describe common properties if you have nothing special for 
this device to say.

> +    maxItems: 1
> +
> +  spi-max-frequency:
> +    description: |
> +      Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt.

Same here.

> +    maximum: 20000000
> +    maxItems: 1

Not an array, so drop.

> +
> +  clocks:
> +    description: Phandle and clock identifier for sampling clock

Same comment on descriptions.

> +    maxItems: 1
> +
> +  interrupts:
> +    description: IRQ line of the ADC
> +    maxItems: 1
> +
> +  microchip,device-addr:
> +    description: Device address when multiple MCP3911 chips are present on the same SPI bus.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - enum: [0, 1, 2, 3]
> +      - default: 0
> +
> +  vref-supply:
> +    description: Phandle to the external reference voltage supply.
> +    maxItems: 1

Drop this *-supply is always 1 item.

> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    spi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      adc@0 {
> +        compatible = "microchip,mcp3911";
> +        reg = <0>;
> +        interrupt-parent = <&gpio5>;
> +        interrupts = <15 2>;
> +        spi-max-frequency = <20000000>;
> +        microchip,device-addr = <0>;
> +        vref-supply = <&vref_reg>;
> +        clocks = <&xtal>;
> +      };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e51a68bf8ca8..fbccc9d450ff 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10723,7 +10723,7 @@ M:	Kent Gustavsson <kent@minoris.se>
>  L:	linux-iio@vger.kernel.org
>  S:	Supported
>  F:	drivers/iio/adc/mcp3911.c
> -F:	Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> +F:	Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
>  
>  MICROCHIP NAND DRIVER
>  M:	Tudor Ambarus <tudor.ambarus@microchip.com>
> -- 
> 2.23.0
> 

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
  2019-11-06  3:49 ` Rob Herring
@ 2019-11-06  7:49   ` Marcus Folkesson
  0 siblings, 0 replies; 3+ messages in thread
From: Marcus Folkesson @ 2019-11-06  7:49 UTC (permalink / raw)
  To: Rob Herring
  Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, Mark Rutland, Kent Gustavsson,
	Mauro Carvalho Chehab, David S . Miller, Greg Kroah-Hartman,
	Paul E . McKenney, linux-iio, devicetree, linux-kernel

Hi Rob,

Thank you for comment. See inline comments.

I will apply the changes to this pending patch as well.
Subject: [PATCH] dt-bindings: iio: dac: Migrate LTC1660 documentation to yaml

On Tue, Nov 05, 2019 at 09:49:20PM -0600, Rob Herring wrote:
> On Tue, Oct 29, 2019 at 10:11:42PM +0100, Marcus Folkesson wrote:
> > Rewrite bindings to use json-schema vocabulary.
> > 
> > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> > ---
> >  .../devicetree/bindings/iio/adc/mcp3911.txt   | 30 --------
> >  .../bindings/iio/adc/microchip,mcp3911.yaml   | 72 +++++++++++++++++++
> >  MAINTAINERS                                   |  2 +-
> >  3 files changed, 73 insertions(+), 31 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> >  create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> > deleted file mode 100644
> > index 3071f48fb30b..000000000000
> > --- a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> > +++ /dev/null
> > @@ -1,30 +0,0 @@
> > -* Microchip MCP3911 Dual channel analog front end (ADC)
> > -
> > -Required properties:
> > - - compatible: Should be "microchip,mcp3911"
> > - - reg: SPI chip select number for the device
> > -
> > -Recommended properties:
> > - - spi-max-frequency: Definition as per
> > -	 Documentation/devicetree/bindings/spi/spi-bus.txt.
> > -	 Max frequency for this chip is 20MHz.
> > -
> > -Optional properties:
> > - - clocks: Phandle and clock identifier for sampling clock
> > - - interrupt-parent: Phandle to the parent interrupt controller
> > - - interrupts: IRQ line for the ADC
> > - - microchip,device-addr: Device address when multiple MCP3911 chips are present on the
> > -	same SPI bus. Valid values are 0-3. Defaults to 0.
> > - - vref-supply: Phandle to the external reference voltage supply.
> > -
> > -Example:
> > -adc@0 {
> > -	compatible = "microchip,mcp3911";
> > -	reg = <0>;
> > -	interrupt-parent = <&gpio5>;
> > -	interrupts = <15 IRQ_TYPE_EDGE_RISING>;
> > -	spi-max-frequency = <20000000>;
> > -	microchip,device-addr = <0>;
> > -	vref-supply = <&vref_reg>;
> > -	clocks = <&xtal>;
> > -};
> > diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> > new file mode 100644
> > index 000000000000..bfcf6a5fb44e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> > @@ -0,0 +1,72 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/bindings/iio/adc/microchip,mcp3911.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Microchip MCP3911 Dual channel analog front end (ADC)
> > +
> > +maintainers:
> > +  - Marcus Folkesson <marcus.folkesson@gmail.com>
> > +  - Kent Gustavsson <nedo80@gmail.com>
> > +
> > +description: |
> > +  Bindings for the Microchip MCP3911 Dual channel ADC device. Datasheet can be
> > +  found here: https://ww1.microchip.com/downloads/en/DeviceDoc/20002286C.pdf
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - microchip,mcp3911
> > +
> > +  reg:
> > +    description: SPI chip select number for the device
> 
> No need to describe common properties if you have nothing special for 
> this device to say.
> 

OK

> > +    maxItems: 1
> > +
> > +  spi-max-frequency:
> > +    description: |
> > +      Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt.
> 
> Same here.
> 
> > +    maximum: 20000000
> > +    maxItems: 1

Should I keep the maximum property?

> 
> Not an array, so drop.
> 
> > +
> > +  clocks:
> > +    description: Phandle and clock identifier for sampling clock
> 
> Same comment on descriptions.
> 

I describe it a little bit more. Thanks

> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    description: IRQ line of the ADC
> > +    maxItems: 1
> > +
> > +  microchip,device-addr:
> > +    description: Device address when multiple MCP3911 chips are present on the same SPI bus.
> > +    allOf:
> > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > +      - enum: [0, 1, 2, 3]
> > +      - default: 0
> > +
> > +  vref-supply:
> > +    description: Phandle to the external reference voltage supply.
> > +    maxItems: 1
> 
> Drop this *-supply is always 1 item.
> 

OK

> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +
> > +examples:
> > +  - |
> > +    spi {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +
> > +      adc@0 {
> > +        compatible = "microchip,mcp3911";
> > +        reg = <0>;
> > +        interrupt-parent = <&gpio5>;
> > +        interrupts = <15 2>;
> > +        spi-max-frequency = <20000000>;
> > +        microchip,device-addr = <0>;
> > +        vref-supply = <&vref_reg>;
> > +        clocks = <&xtal>;
> > +      };
> > +    };
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index e51a68bf8ca8..fbccc9d450ff 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -10723,7 +10723,7 @@ M:	Kent Gustavsson <kent@minoris.se>
> >  L:	linux-iio@vger.kernel.org
> >  S:	Supported
> >  F:	drivers/iio/adc/mcp3911.c
> > -F:	Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> > +F:	Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> >  
> >  MICROCHIP NAND DRIVER
> >  M:	Tudor Ambarus <tudor.ambarus@microchip.com>
> > -- 
> > 2.23.0
> > 

Thanks,
Marcus Folkesson


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-29 21:11 [PATCH] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml Marcus Folkesson
2019-11-06  3:49 ` Rob Herring
2019-11-06  7:49   ` Marcus Folkesson

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git