linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: lorenzo.bianconi@redhat.com, linux-iio@vger.kernel.org
Subject: Re: [PATCH] iio: humidity: hts221: move register definitions to sensor structs
Date: Sat, 7 Dec 2019 10:39:27 +0000	[thread overview]
Message-ID: <20191207103927.035eda2a@archlinux> (raw)
In-Reply-To: <0e49f52be057a14f0885dfaf496e8274c8107f60.1575282133.git.lorenzo@kernel.org>

On Mon,  2 Dec 2019 12:23:28 +0200
Lorenzo Bianconi <lorenzo@kernel.org> wrote:

> Move some register definitions to hts221_avg_list, hts221_avg_list and
> hts221_channels since they are used only there and simplify driver code
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
You could potentially switch this to GENMASK for the masks, but that can
be a follow up patch if you want to do so.

Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan

> ---
>  drivers/iio/humidity/hts221_core.c | 19 ++++++-------------
>  1 file changed, 6 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/iio/humidity/hts221_core.c b/drivers/iio/humidity/hts221_core.c
> index 4922444771c6..9003671f14fb 100644
> --- a/drivers/iio/humidity/hts221_core.c
> +++ b/drivers/iio/humidity/hts221_core.c
> @@ -24,13 +24,6 @@
>  #define HTS221_REG_CNTRL1_ADDR		0x20
>  #define HTS221_REG_CNTRL2_ADDR		0x21
>  
> -#define HTS221_REG_AVG_ADDR		0x10
> -#define HTS221_REG_H_OUT_L		0x28
> -#define HTS221_REG_T_OUT_L		0x2a
> -
> -#define HTS221_HUMIDITY_AVG_MASK	0x07
> -#define HTS221_TEMP_AVG_MASK		0x38
> -
>  #define HTS221_ODR_MASK			0x03
>  #define HTS221_BDU_MASK			BIT(2)
>  #define HTS221_ENABLE_MASK		BIT(7)
> @@ -66,8 +59,8 @@ static const struct hts221_odr hts221_odr_table[] = {
>  
>  static const struct hts221_avg hts221_avg_list[] = {
>  	{
> -		.addr = HTS221_REG_AVG_ADDR,
> -		.mask = HTS221_HUMIDITY_AVG_MASK,
> +		.addr = 0x10,
> +		.mask = 0x07,
>  		.avg_avl = {
>  			4, /* 0.4 %RH */
>  			8, /* 0.3 %RH */
> @@ -80,8 +73,8 @@ static const struct hts221_avg hts221_avg_list[] = {
>  		},
>  	},
>  	{
> -		.addr = HTS221_REG_AVG_ADDR,
> -		.mask = HTS221_TEMP_AVG_MASK,
> +		.addr = 0x10,
> +		.mask = 0x38,
>  		.avg_avl = {
>  			2, /* 0.08 degC */
>  			4, /* 0.05 degC */
> @@ -98,7 +91,7 @@ static const struct hts221_avg hts221_avg_list[] = {
>  static const struct iio_chan_spec hts221_channels[] = {
>  	{
>  		.type = IIO_HUMIDITYRELATIVE,
> -		.address = HTS221_REG_H_OUT_L,
> +		.address = 0x28,
>  		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>  				      BIT(IIO_CHAN_INFO_OFFSET) |
>  				      BIT(IIO_CHAN_INFO_SCALE) |
> @@ -114,7 +107,7 @@ static const struct iio_chan_spec hts221_channels[] = {
>  	},
>  	{
>  		.type = IIO_TEMP,
> -		.address = HTS221_REG_T_OUT_L,
> +		.address = 0x2a,
>  		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>  				      BIT(IIO_CHAN_INFO_OFFSET) |
>  				      BIT(IIO_CHAN_INFO_SCALE) |


  reply	other threads:[~2019-12-07 10:39 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-02 10:23 [PATCH] iio: humidity: hts221: move register definitions to sensor structs Lorenzo Bianconi
2019-12-07 10:39 ` Jonathan Cameron [this message]
2019-12-07 12:47   ` Lorenzo Bianconi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191207103927.035eda2a@archlinux \
    --to=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=lorenzo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).