Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625
@ 2020-01-06  0:47 Jeff LaBundy
  2020-01-06  0:48 ` [PATCH v3 1/7] dt-bindings: Add bindings " Jeff LaBundy
                   ` (6 more replies)
  0 siblings, 7 replies; 12+ messages in thread
From: Jeff LaBundy @ 2020-01-06  0:47 UTC (permalink / raw)
  To: lee.jones, dmitry.torokhov, thierry.reding, jic23, devicetree
  Cc: linux-input, u.kleine-koenig, linux-pwm, knaack.h, lars, pmeerw,
	linux-iio, robh+dt, mark.rutland, Jeff LaBundy

This series adds support for the Azoteq IQS620A, IQS621, IQS622, IQS624 and
IQS625 multi-function sensors. Each device integrates numerous sensing tech-
nologies in a single package.

A multi-function device (MFD) driver supports core functions common to all
devices, including device identification, firmware, interrupt handling and
runtime power management. The MFD driver is also responsible for adding all
product-specific sub-devices.

Each device supports self-capacitive, Hall-effect, and (in some cases) mutual-
inductive sensing. These functions represent keys or switches and are supported
by an input driver that covers all five devices. An assortment of pwm and iio
drivers supports device-specific functions including ambient light and angular
position sensing.

This series was tested using the following development hardware: IQS620AEV04,
IQS621EV04, IQS622EV04 and IQS624/5EV04.

Jeff LaBundy (7):
  dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  mfd: Add support for Azoteq IQS620A/621/622/624/625
  input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  pwm: Add support for Azoteq IQS620A PWM generator
  iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  iio: light: Add support for Azoteq IQS621/622 ambient light sensors
  iio: position: Add support for Azoteq IQS624/625 angle sensors

 .../devicetree/bindings/input/iqs62x-keys.yaml     | 132 +++++
 Documentation/devicetree/bindings/mfd/iqs62x.yaml  | 179 ++++++
 .../devicetree/bindings/pwm/iqs620a-pwm.yaml       |  32 ++
 drivers/iio/Kconfig                                |   1 +
 drivers/iio/Makefile                               |   1 +
 drivers/iio/light/Kconfig                          |  10 +
 drivers/iio/light/Makefile                         |   1 +
 drivers/iio/light/iqs621-als.c                     | 614 ++++++++++++++++++++
 drivers/iio/position/Kconfig                       |  19 +
 drivers/iio/position/Makefile                      |   7 +
 drivers/iio/position/iqs624-pos.c                  | 284 +++++++++
 drivers/iio/temperature/Kconfig                    |  10 +
 drivers/iio/temperature/Makefile                   |   1 +
 drivers/iio/temperature/iqs620at-temp.c            |  97 ++++
 drivers/input/keyboard/Kconfig                     |  10 +
 drivers/input/keyboard/Makefile                    |   1 +
 drivers/input/keyboard/iqs62x-keys.c               | 340 +++++++++++
 drivers/mfd/Kconfig                                |  13 +
 drivers/mfd/Makefile                               |   3 +
 drivers/mfd/iqs62x-core.c                          | 639 +++++++++++++++++++++
 drivers/mfd/iqs62x-tables.c                        | 438 ++++++++++++++
 drivers/pwm/Kconfig                                |  10 +
 drivers/pwm/Makefile                               |   1 +
 drivers/pwm/pwm-iqs620a.c                          | 254 ++++++++
 include/linux/mfd/iqs62x.h                         | 146 +++++
 25 files changed, 3243 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/iqs62x-keys.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/iqs62x.yaml
 create mode 100644 Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml
 create mode 100644 drivers/iio/light/iqs621-als.c
 create mode 100644 drivers/iio/position/Kconfig
 create mode 100644 drivers/iio/position/Makefile
 create mode 100644 drivers/iio/position/iqs624-pos.c
 create mode 100644 drivers/iio/temperature/iqs620at-temp.c
 create mode 100644 drivers/input/keyboard/iqs62x-keys.c
 create mode 100644 drivers/mfd/iqs62x-core.c
 create mode 100644 drivers/mfd/iqs62x-tables.c
 create mode 100644 drivers/pwm/pwm-iqs620a.c
 create mode 100644 include/linux/mfd/iqs62x.h

--
2.7.4


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v3 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  2020-01-06  0:47 [PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
@ 2020-01-06  0:48 ` " Jeff LaBundy
  2020-01-06  0:48 ` [PATCH v3 2/7] mfd: Add support " Jeff LaBundy
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 12+ messages in thread
From: Jeff LaBundy @ 2020-01-06  0:48 UTC (permalink / raw)
  To: lee.jones, dmitry.torokhov, thierry.reding, jic23, devicetree
  Cc: linux-input, u.kleine-koenig, linux-pwm, knaack.h, lars, pmeerw,
	linux-iio, robh+dt, mark.rutland, Jeff LaBundy

This patch adds device tree bindings for the Azoteq IQS620A, IQS621,
IQS622, IQS624 and IQS625 multi-function sensors.

A total of three bindings are presented (one MFD and two child nodes);
they are submitted as a single patch because the child node bindings
have no meaning in the absence of the MFD binding.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes in v3:
  - Specified 'additionalProperties: false' within the parent MFD node and all
    child nodes ("keys", "hall-switch-north/south" and "pwm")
  - Defined the "hall-switch-north/south" child nodes unconditionally and then
    inverted the subsequent if/then to filter them from devices for which that
    functionality is unavailable
  - Added Reviewed-by trailer

Changes in v2:
  - Removed "prox" child node and moved "keys" and "pwm" child nodes to their
    own bindings
  - Replaced linux,fw-file property with more common firmware-name property
  - Converted all bindings to YAML

 .../devicetree/bindings/input/iqs62x-keys.yaml     | 132 +++++++++++++++
 Documentation/devicetree/bindings/mfd/iqs62x.yaml  | 179 +++++++++++++++++++++
 .../devicetree/bindings/pwm/iqs620a-pwm.yaml       |  32 ++++
 3 files changed, 343 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/iqs62x-keys.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/iqs62x.yaml
 create mode 100644 Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml

diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
new file mode 100644
index 0000000..5625c22
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs62x-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A/621/622/624/625 Keys and Switches
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
+  feature a variety of self-capacitive, mutual-inductive and Hall-effect sens-
+  ing capabilities that can facilitate a variety of contactless key and switch
+  applications.
+
+  These functions are collectively represented by a "keys" child node from the
+  parent MFD driver. See Documentation/devicetree/bindings/mfd/iqs62x.yaml for
+  further details and examples. Sensor hardware configuration (self-capacitive
+  vs. mutual-inductive, etc.) is selected based on the device's firmware.
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs620a-keys
+      - azoteq,iqs621-keys
+      - azoteq,iqs622-keys
+      - azoteq,iqs624-keys
+      - azoteq,iqs625-keys
+
+  linux,keycodes:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 1
+        maxItems: 16
+    description: |
+      Specifies the numeric keycodes associated with each available touch or
+      proximity event according to the following table. An 'x' indicates the
+      event is supported for a given device. Specify 0 for unused events.
+
+      -------------------------------------------------------------------------
+      | #  | Event              | IQS620A | IQS621 | IQS622 | IQS624 | IQS625 |
+      -------------------------------------------------------------------------
+      | 0  | CH0 Touch          |    x    |    x   |    x   |    x   |    x   |
+      |    | Antenna 1 Touch*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 1  | CH0 Proximity      |    x    |    x   |    x   |    x   |    x   |
+      |    | Antenna 1 Prox.*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 2  | CH1 Touch          |    x    |    x   |    x   |    x   |    x   |
+      |    | Ant. 1 Deep Touch* |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 3  | CH1 Proximity      |    x    |    x   |    x   |    x   |    x   |
+      -------------------------------------------------------------------------
+      | 4  | CH2 Touch          |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 5  | CH2 Proximity      |    x    |        |        |        |        |
+      |    | Antenna 2 Prox.*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 6  | Metal (+) Touch**  |    x    |    x   |        |        |        |
+      |    | Ant. 2 Deep Touch* |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 7  | Metal (+) Prox.**  |    x    |    x   |        |        |        |
+      |    | Antenna 2 Touch*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 8  | Metal (-) Touch**  |    x    |    x   |        |        |        |
+      -------------------------------------------------------------------------
+      | 9  | Metal (-) Prox.**  |    x    |    x   |        |        |        |
+      -------------------------------------------------------------------------
+      | 10 | SAR Active***      |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 11 | SAR Quick Rel.***  |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 12 | SAR Movement***    |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 13 | SAR Filter Halt*** |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 14 | Wheel Up           |         |        |        |    x   |        |
+      -------------------------------------------------------------------------
+      | 15 | Wheel Down         |         |        |        |    x   |        |
+      -------------------------------------------------------------------------
+      *   Two-channel SAR. Replaces CH0-2 plus metal touch and proximity events
+          if enabled via firmware.
+      **  "+" and "-" refer to the polarity of a channel's delta (LTA - counts),
+          where "LTA" is defined as the channel's long-term average.
+      *** One-channel SAR. Replaces CH0-2 touch and proximity events if enabled
+          via firmware.
+
+patternProperties:
+  "^hall-switch-(north|south)$":
+    type: object
+    description:
+      Represents north/south-field Hall-effect sensor touch or proximity
+      events. Note that north/south-field orientation is reversed on the
+      IQS620AXzCSR device due to its flip-chip package.
+
+    properties:
+      linux,code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Numeric switch code associated with the event.
+
+      azoteq,use-prox:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          If present, specifies that Hall-effect sensor reporting should
+          use the device's wide-range proximity threshold instead of its
+          close-range touch threshold (default).
+
+    required:
+      - linux,code
+
+    additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - azoteq,iqs624-keys
+          - azoteq,iqs625-keys
+then:
+  patternProperties:
+    "^hall-switch-(north|south)$": false
+
+required:
+  - compatible
+  - linux,keycodes
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
new file mode 100644
index 0000000..46b7272
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/iqs62x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A/621/622/624/625 Multi-Function Sensors
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
+  integrate multiple sensing technologies in a single package.
+
+  Link to data sheets: https://www.azoteq.com/
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs620a
+      - azoteq,iqs621
+      - azoteq,iqs622
+      - azoteq,iqs624
+      - azoteq,iqs625
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Specifies the name of the calibration and configuration file selected by
+      the driver. If this property is omitted, the name is chosen based on the
+      device name with ".bin" as the extension (e.g. iqs620a.bin for IQS620A).
+
+  keys:
+    $ref: ../input/iqs62x-keys.yaml
+
+  pwm:
+    $ref: ../pwm/iqs620a-pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    /*
+     * Dual capacitive buttons with additional "air button," unipolar lid
+     * switch and panel-mounted LED.
+     */
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs620a@44 {
+                    compatible = "azoteq,iqs620a";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    keys {
+                            compatible = "azoteq,iqs620a-keys";
+
+                            linux,keycodes = <KEY_SELECT>,
+                                             <KEY_MENU>,
+                                             <KEY_OK>,
+                                             <KEY_MENU>;
+
+                            hall-switch-south {
+                                    linux,code = <SW_LID>;
+                                    azoteq,use-prox;
+                            };
+                    };
+
+                    iqs620a_pwm: pwm {
+                            compatible = "azoteq,iqs620a-pwm";
+                            #pwm-cells = <2>;
+                    };
+            };
+    };
+
+    pwmleds {
+            compatible = "pwm-leds";
+
+            panel {
+                    pwms = <&iqs620a_pwm 0 1000000>;
+                    max-brightness = <255>;
+            };
+    };
+
+  - |
+    /* Single inductive button with bipolar dock/tablet-mode switch. */
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs620a@44 {
+                    compatible = "azoteq,iqs620a";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    firmware-name = "iqs620a_coil.bin";
+
+                    keys {
+                            compatible = "azoteq,iqs620a-keys";
+
+                            linux,keycodes = <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <KEY_MUTE>;
+
+                            hall-switch-north {
+                                    linux,code = <SW_DOCK>;
+                            };
+
+                            hall-switch-south {
+                                    linux,code = <SW_TABLET_MODE>;
+                            };
+                    };
+            };
+    };
+
+  - |
+    /* Dual capacitive buttons with volume knob. */
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs624@44 {
+                    compatible = "azoteq,iqs624";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    keys {
+                            compatible = "azoteq,iqs624-keys";
+
+                            linux,keycodes = <BTN_0>,
+                                             <0>,
+                                             <BTN_1>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <KEY_VOLUMEUP>,
+                                             <KEY_VOLUMEDOWN>;
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml
new file mode 100644
index 0000000..1d7c27b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/iqs620a-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A PWM Generator
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS620A multi-function sensor generates a fixed-frequency PWM
+  output represented by a "pwm" child node from the parent MFD driver. See
+  Documentation/devicetree/bindings/mfd/iqs62x.yaml for further details as
+  well as an example.
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs620a-pwm
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+  - "#pwm-cells"
+
+additionalProperties: false
+
+...
--
2.7.4


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v3 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  2020-01-06  0:47 [PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
  2020-01-06  0:48 ` [PATCH v3 1/7] dt-bindings: Add bindings " Jeff LaBundy
@ 2020-01-06  0:48 ` " Jeff LaBundy
  2020-01-06  0:48 ` [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator Jeff LaBundy
                   ` (4 subsequent siblings)
  6 siblings, 0 replies; 12+ messages in thread
From: Jeff LaBundy @ 2020-01-06  0:48 UTC (permalink / raw)
  To: lee.jones, dmitry.torokhov, thierry.reding, jic23, devicetree
  Cc: linux-input, u.kleine-koenig, linux-pwm, knaack.h, lars, pmeerw,
	linux-iio, robh+dt, mark.rutland, Jeff LaBundy

This patch adds core support for the Azoteq IQS620A, IQS621, IQS622,
IQS624 and IQS625 multi-function sensors.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
Changes in v3:
  - None

Changes in v2:
  - Merged 'Copyright' and 'Author' lines into one in introductory comments
  - Replaced 'error' with 'ret' throughout
  - Updated iqs62x_dev_init to account for 4/8/16-MHz clock divider in start-up
    delays and replaced ATI timeout routine with regmap_read_poll_timeout
  - Added an error message to iqs62x_irq in case device status fails to be read
  - Replaced sw_num member of iqs62x_core with a local variable in iqs62x_probe
    as the former was unused anywhere else
  - Added comments throughout iqs62x_probe to clarify how devices are matched
    based on the presence of calibration data
  - Inverted the product and software number comparison logic in iqs62x_probe
    to avoid an else...continue branch
  - Changed iqs62x_probe from .probe callback to .probe_new callback, thereby
    eliminating the otherwise unused iqs62x_id array
  - Moved iqs62x_suspend and iqs62x_resume below iqs62x_remove
  - Eliminated tabbed alignment of regmap_config and i2c_driver struct members
  - Added register definitions for register addresses used in iqs621_cal_regs,
    iqs620at_cal_regs and iqs62x_devs arrays
  - Removed of_compatible string from IQS622 mfd_cell struct as its proximity
    (now ambient light) sensing functionality need not be represented using a
    child node
  - Dissolved union in iqs62x_event_data to allow simultaneous use of ir_flags
    and als_flags
  - Removed temp_flags member of iqs62x_event_data, IQS62X_EVENT_TEMP register
    enumeration and IQS62X_EVENT_UI_HI/LO from iqs620a_event_regs (thereby re-
    ducing IQS62X_EVENT_SIZE to 10) as they were unused

 drivers/mfd/Kconfig         |  13 +
 drivers/mfd/Makefile        |   3 +
 drivers/mfd/iqs62x-core.c   | 639 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/mfd/iqs62x-tables.c | 438 ++++++++++++++++++++++++++++++
 include/linux/mfd/iqs62x.h  | 146 ++++++++++
 5 files changed, 1239 insertions(+)
 create mode 100644 drivers/mfd/iqs62x-core.c
 create mode 100644 drivers/mfd/iqs62x-tables.c
 create mode 100644 include/linux/mfd/iqs62x.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 4209008..151984c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -642,6 +642,19 @@ config MFD_IPAQ_MICRO
 	  AT90LS8535 microcontroller flashed with a special iPAQ
 	  firmware using the custom protocol implemented in this driver.

+config MFD_IQS62X
+	tristate "Azoteq IQS620A/621/622/624/625 core support"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Say Y here if you want to build core support for the Azoteq IQS620A,
+	  IQS621, IQS622, IQS624 and IQS625 multi-function sensors. Additional
+	  options must be selected to enable device-specific functions.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called iqs62x.
+
 config MFD_JANZ_CMODIO
 	tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index aed99f0..c4fc26b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -232,6 +232,9 @@ obj-$(CONFIG_MFD_DLN2)		+= dln2.o
 obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
 obj-$(CONFIG_MFD_SKY81452)	+= sky81452.o

+iqs62x-objs			:= iqs62x-core.o iqs62x-tables.o
+obj-$(CONFIG_MFD_IQS62X)	+= iqs62x.o
+
 intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
 obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
 obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC)	+= intel_soc_pmic_bxtwc.o
diff --git a/drivers/mfd/iqs62x-core.c b/drivers/mfd/iqs62x-core.c
new file mode 100644
index 0000000..767f9d8
--- /dev/null
+++ b/drivers/mfd/iqs62x-core.c
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620A/621/622/624/625 Multi-Function Sensors
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ *
+ * These devices rely on application-specific register settings and calibration
+ * data developed in and exported from a suite of GUIs offered by the vendor. A
+ * separate tool converts the GUIs' ASCII-based output into a standard firmware
+ * file parsed by the driver.
+ *
+ * Link to data sheets and GUIs: https://www.azoteq.com/
+ *
+ * Link to conversion tool: https://github.com/jlabundy/iqs62x-h2bin.git
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+#include <linux/mfd/iqs62x.h>
+
+#define IQS62X_PROD_NUM				0x00
+
+#define IQS62X_SYS_FLAGS			0x10
+#define IQS62X_SYS_FLAGS_IN_ATI			BIT(2)
+
+#define IQS622_PROX_SETTINGS_4			0x48
+#define IQS620_PROX_SETTINGS_4			0x50
+#define IQS620_PROX_SETTINGS_4_SAR_EN		BIT(7)
+
+#define IQS62X_SYS_SETTINGS			0xD0
+#define IQS62X_SYS_SETTINGS_SOFT_RESET		BIT(7)
+#define IQS62X_SYS_SETTINGS_ACK_RESET		BIT(6)
+#define IQS62X_SYS_SETTINGS_EVENT_MODE		BIT(5)
+#define IQS62X_SYS_SETTINGS_CLK_DIV		BIT(4)
+#define IQS62X_SYS_SETTINGS_REDO_ATI		BIT(1)
+
+#define IQS62X_PWR_SETTINGS			0xD2
+#define IQS62X_PWR_SETTINGS_DIS_AUTO		BIT(5)
+#define IQS62X_PWR_SETTINGS_PWR_MODE_MASK	(BIT(4) | BIT(3))
+#define IQS62X_PWR_SETTINGS_PWR_MODE_HALT	(BIT(4) | BIT(3))
+#define IQS62X_PWR_SETTINGS_PWR_MODE_NORM	0
+
+#define IQS62X_OTP_CMD				0xF0
+#define IQS62X_OTP_CMD_FG3			0x13
+#define IQS62X_OTP_DATA				0xF1
+#define IQS62X_MAX_REG				0xFF
+
+#define IQS62X_HALL_CAL_MASK			GENMASK(3, 0)
+
+#define IQS62X_FW_REC_TYPE_INFO			0
+#define IQS62X_FW_REC_TYPE_PROD			1
+#define IQS62X_FW_REC_TYPE_HALL			2
+#define IQS62X_FW_REC_TYPE_MASK			3
+#define IQS62X_FW_REC_TYPE_DATA			4
+
+struct iqs62x_fw_rec {
+	u8 type;
+	u8 addr;
+	u8 len;
+	u8 data;
+} __packed;
+
+struct iqs62x_fw_blk {
+	struct list_head list;
+	u8 addr;
+	u8 mask;
+	u8 len;
+	u8 data[];
+};
+
+struct iqs62x_info {
+	u8 prod_num;
+	u8 sw_num;
+	u8 hw_num;
+} __packed;
+
+static int iqs62x_dev_init(struct iqs62x_core *iqs62x)
+{
+	struct iqs62x_fw_blk *fw_blk;
+	unsigned int val;
+	int ret;
+	u8 clk_div = 1;
+
+	list_for_each_entry(fw_blk, &iqs62x->fw_blk_head, list) {
+		if (fw_blk->mask)
+			ret = regmap_update_bits(iqs62x->map, fw_blk->addr,
+						 fw_blk->mask, *fw_blk->data);
+		else
+			ret = regmap_raw_write(iqs62x->map, fw_blk->addr,
+					       fw_blk->data, fw_blk->len);
+		if (ret)
+			return ret;
+	}
+
+	switch (iqs62x->dev_desc->prod_num) {
+	case IQS620_PROD_NUM:
+	case IQS622_PROD_NUM:
+		ret = regmap_read(iqs62x->map, iqs62x->dev_desc->prod_num ==
+				  IQS620_PROD_NUM ? IQS620_PROX_SETTINGS_4 :
+						    IQS622_PROX_SETTINGS_4,
+				  &val);
+		if (ret)
+			return ret;
+
+		if (val & IQS620_PROX_SETTINGS_4_SAR_EN)
+			iqs62x->ui_sel = IQS62X_UI_SAR1;
+		/* fall through */
+
+	case IQS621_PROD_NUM:
+		ret = regmap_write(iqs62x->map, IQS620_GLBL_EVENT_MASK,
+				   IQS620_GLBL_EVENT_MASK_PMU |
+				   iqs62x->dev_desc->prox_mask |
+				   iqs62x->dev_desc->sar_mask |
+				   iqs62x->dev_desc->hall_mask |
+				   iqs62x->dev_desc->hyst_mask |
+				   iqs62x->dev_desc->temp_mask |
+				   iqs62x->dev_desc->als_mask |
+				   iqs62x->dev_desc->ir_mask);
+		if (ret)
+			return ret;
+		break;
+
+	default:
+		ret = regmap_write(iqs62x->map, IQS624_HALL_UI,
+				   IQS624_HALL_UI_WHL_EVENT |
+				   IQS624_HALL_UI_INT_EVENT |
+				   IQS624_HALL_UI_AUTO_CAL);
+		if (ret)
+			return ret;
+
+		ret = regmap_read(iqs62x->map, IQS624_INTERVAL_DIV, &val);
+		if (ret)
+			return ret;
+
+		if (val >= iqs62x->dev_desc->interval_div)
+			break;
+
+		ret = regmap_write(iqs62x->map, IQS624_INTERVAL_DIV,
+				   iqs62x->dev_desc->interval_div);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_read(iqs62x->map, IQS62X_SYS_SETTINGS, &val);
+	if (ret)
+		return ret;
+
+	if (val & IQS62X_SYS_SETTINGS_CLK_DIV)
+		clk_div = iqs62x->dev_desc->clk_div;
+
+	ret = regmap_write(iqs62x->map, IQS62X_SYS_SETTINGS, val |
+			   IQS62X_SYS_SETTINGS_ACK_RESET |
+			   IQS62X_SYS_SETTINGS_EVENT_MODE |
+			   IQS62X_SYS_SETTINGS_REDO_ATI);
+	if (ret)
+		return ret;
+
+	ret = regmap_read_poll_timeout(iqs62x->map, IQS62X_SYS_FLAGS, val,
+				       !(val & IQS62X_SYS_FLAGS_IN_ATI),
+				       10000, clk_div * 500000);
+	if (ret)
+		return ret;
+
+	/*
+	 * The following delay accommodates the post-ATI stabilization time
+	 * specified in the data sheet (with additional margin).
+	 */
+	msleep(clk_div * 150);
+
+	return 0;
+}
+
+static int iqs62x_fw_prs(struct iqs62x_core *iqs62x, const struct firmware *fw)
+{
+	struct i2c_client *client = iqs62x->client;
+	struct iqs62x_fw_rec *fw_rec;
+	struct iqs62x_fw_blk *fw_blk;
+	unsigned int val;
+	size_t pos = 0;
+	int ret = 0;
+	u8 mask, len, *data;
+	u8 hall_cal_index = 0;
+
+	while (pos < fw->size) {
+		if (pos + sizeof(*fw_rec) > fw->size) {
+			ret = -EINVAL;
+			break;
+		}
+		fw_rec = (struct iqs62x_fw_rec *)(fw->data + pos);
+		pos += sizeof(*fw_rec);
+
+		if (pos + fw_rec->len - 1 > fw->size) {
+			ret = -EINVAL;
+			break;
+		}
+		pos += fw_rec->len - 1;
+
+		switch (fw_rec->type) {
+		case IQS62X_FW_REC_TYPE_INFO:
+			continue;
+
+		case IQS62X_FW_REC_TYPE_PROD:
+			if (fw_rec->data == iqs62x->dev_desc->prod_num)
+				continue;
+
+			dev_err(&client->dev,
+				"Incompatible product number: 0x%02X\n",
+				fw_rec->data);
+			ret = -EINVAL;
+			break;
+
+		case IQS62X_FW_REC_TYPE_HALL:
+			if (!hall_cal_index) {
+				ret = regmap_write(iqs62x->map, IQS62X_OTP_CMD,
+						   IQS62X_OTP_CMD_FG3);
+				if (ret)
+					break;
+
+				ret = regmap_read(iqs62x->map, IQS62X_OTP_DATA,
+						  &val);
+				if (ret)
+					break;
+
+				hall_cal_index = val & IQS62X_HALL_CAL_MASK;
+				if (!hall_cal_index) {
+					dev_err(&client->dev,
+						"Uncalibrated device\n");
+					ret = -ENODATA;
+					break;
+				}
+			}
+
+			if (hall_cal_index > fw_rec->len) {
+				ret = -EINVAL;
+				break;
+			}
+
+			mask = 0;
+			data = &fw_rec->data + hall_cal_index - 1;
+			len = sizeof(*data);
+			break;
+
+		case IQS62X_FW_REC_TYPE_MASK:
+			if (fw_rec->len < (sizeof(mask) + sizeof(*data))) {
+				ret = -EINVAL;
+				break;
+			}
+
+			mask = fw_rec->data;
+			data = &fw_rec->data + sizeof(mask);
+			len = sizeof(*data);
+			break;
+
+		case IQS62X_FW_REC_TYPE_DATA:
+			mask = 0;
+			data = &fw_rec->data;
+			len = fw_rec->len;
+			break;
+
+		default:
+			dev_err(&client->dev,
+				"Unrecognized record type: 0x%02X\n",
+				fw_rec->type);
+			ret = -EINVAL;
+		}
+
+		if (ret)
+			break;
+
+		fw_blk = devm_kzalloc(&client->dev,
+				      struct_size(fw_blk, data, len),
+				      GFP_KERNEL);
+		if (!fw_blk) {
+			ret = -ENOMEM;
+			break;
+		}
+
+		fw_blk->addr = fw_rec->addr;
+		fw_blk->mask = mask;
+		fw_blk->len = len;
+		memcpy(fw_blk->data, data, len);
+
+		list_add(&fw_blk->list, &iqs62x->fw_blk_head);
+	}
+
+	release_firmware(fw);
+
+	return ret;
+}
+
+static irqreturn_t iqs62x_irq(int irq, void *context)
+{
+	struct iqs62x_core *iqs62x = context;
+	struct i2c_client *client = iqs62x->client;
+	struct iqs62x_event_data event_data;
+	struct iqs62x_event_desc event_desc;
+	enum iqs62x_event_reg event_reg;
+	unsigned long event_flags = 0;
+	int ret, i, j;
+	u8 event_map[IQS62X_EVENT_SIZE];
+
+	/*
+	 * The device asserts the RDY output to signal the beginning of a
+	 * communication window, which is closed by an I2C stop condition.
+	 * As such, all interrupt status is captured in a single read and
+	 * broadcast to any interested sub-device drivers.
+	 */
+	ret = regmap_raw_read(iqs62x->map, IQS62X_SYS_FLAGS, event_map,
+			      sizeof(event_map));
+	if (ret) {
+		dev_err(&client->dev, "Failed to read device status: %d\n",
+			ret);
+		return IRQ_NONE;
+	}
+
+	for (i = 0; i < sizeof(event_map); i++) {
+		event_reg = iqs62x->dev_desc->event_regs[iqs62x->ui_sel][i];
+
+		switch (event_reg) {
+		case IQS62X_EVENT_UI_LO:
+			event_data.ui_data = get_unaligned_le16(&event_map[i]);
+			/* fall through */
+		case IQS62X_EVENT_UI_HI:
+		case IQS62X_EVENT_NONE:
+			continue;
+
+		case IQS62X_EVENT_ALS:
+			event_data.als_flags = event_map[i];
+			continue;
+
+		case IQS62X_EVENT_IR:
+			event_data.ir_flags = event_map[i];
+			continue;
+
+		case IQS62X_EVENT_INTER:
+			event_data.interval = event_map[i];
+			continue;
+
+		case IQS62X_EVENT_HYST:
+			event_map[i] <<= iqs62x->dev_desc->hyst_shift;
+			/* fall through */
+		case IQS62X_EVENT_WHEEL:
+		case IQS62X_EVENT_HALL:
+		case IQS62X_EVENT_PROX:
+		case IQS62X_EVENT_SYS:
+			break;
+		}
+
+		for (j = 0; j < IQS62X_NUM_EVENTS; j++) {
+			event_desc = iqs62x_events[j];
+
+			if (event_desc.reg != event_reg)
+				continue;
+
+			if ((event_map[i] & event_desc.mask) == event_desc.val)
+				event_flags |= BIT(j);
+		}
+	}
+
+	/*
+	 * The device resets itself in response to the I2C master stalling
+	 * communication past a fixed timeout. In this case, all registers
+	 * are restored and any interested sub-device drivers are notified.
+	 */
+	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
+		dev_err(&client->dev, "Unexpected device reset\n");
+
+		ret = iqs62x_dev_init(iqs62x);
+		if (ret) {
+			dev_err(&client->dev,
+				"Failed to re-initialize device: %d\n", ret);
+			return IRQ_NONE;
+		}
+	}
+
+	ret = blocking_notifier_call_chain(&iqs62x->nh, event_flags,
+					   &event_data);
+	if (ret & NOTIFY_STOP_MASK)
+		return IRQ_NONE;
+
+	/*
+	 * Once the communication window is closed, a small delay is added to
+	 * ensure the device's RDY output has been deasserted by the time the
+	 * interrupt handler returns.
+	 */
+	usleep_range(50, 100);
+
+	return IRQ_HANDLED;
+}
+
+static void iqs62x_fw_cb(const struct firmware *fw, void *context)
+{
+	struct iqs62x_core *iqs62x = context;
+	struct i2c_client *client = iqs62x->client;
+	int ret;
+
+	if (fw) {
+		ret = iqs62x_fw_prs(iqs62x, fw);
+		if (ret) {
+			dev_err(&client->dev, "Failed to parse firmware: %d\n",
+				ret);
+			goto err_out;
+		}
+	}
+
+	ret = iqs62x_dev_init(iqs62x);
+	if (ret) {
+		dev_err(&client->dev, "Failed to initialize device: %d\n", ret);
+		goto err_out;
+	}
+
+	ret = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL, iqs62x_irq, IRQF_ONESHOT,
+					client->name, iqs62x);
+	if (ret) {
+		dev_err(&client->dev, "Failed to request IRQ: %d\n", ret);
+		goto err_out;
+	}
+
+	ret = devm_mfd_add_devices(&client->dev, -1,
+				   iqs62x->dev_desc->sub_devs,
+				   iqs62x->dev_desc->num_sub_devs,
+				   NULL, 0, NULL);
+	if (ret)
+		dev_err(&client->dev, "Failed to add devices: %d\n", ret);
+
+err_out:
+	complete_all(&iqs62x->fw_done);
+}
+
+static const struct regmap_config iqs62x_map_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = IQS62X_MAX_REG,
+};
+
+static int iqs62x_probe(struct i2c_client *client)
+{
+	struct iqs62x_core *iqs62x;
+	struct iqs62x_info info;
+	unsigned int val;
+	int ret, i, j;
+	u8 sw_num = 0;
+	const char *fw_name = NULL;
+
+	iqs62x = devm_kzalloc(&client->dev, sizeof(*iqs62x), GFP_KERNEL);
+	if (!iqs62x)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, iqs62x);
+	iqs62x->client = client;
+
+	BLOCKING_INIT_NOTIFIER_HEAD(&iqs62x->nh);
+	INIT_LIST_HEAD(&iqs62x->fw_blk_head);
+	init_completion(&iqs62x->fw_done);
+
+	iqs62x->map = devm_regmap_init_i2c(client, &iqs62x_map_config);
+	if (IS_ERR(iqs62x->map)) {
+		ret = PTR_ERR(iqs62x->map);
+		dev_err(&client->dev, "Failed to initialize register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = regmap_raw_read(iqs62x->map, IQS62X_PROD_NUM, &info,
+			      sizeof(info));
+	if (ret)
+		return ret;
+
+	/*
+	 * The following sequence validates the device's product and software
+	 * numbers. It then determines if the device is factory-calibrated by
+	 * checking for nonzero values in the device's designated calibration
+	 * registers (if applicable). Depending on the device, the absence of
+	 * calibration data indicates a reduced feature set or invalid device.
+	 *
+	 * For devices given in both calibrated and uncalibrated versions, the
+	 * calibrated version (e.g. IQS620AT) appears first in the iqs62x_devs
+	 * array. The uncalibrated version (e.g. IQS620A) appears next and has
+	 * the same product and software numbers, but no calibration registers
+	 * are specified.
+	 */
+	for (i = 0; i < IQS62X_NUM_DEV; i++) {
+		if (info.prod_num != iqs62x_devs[i].prod_num)
+			continue;
+		iqs62x->dev_desc = &iqs62x_devs[i];
+
+		if (info.sw_num < iqs62x->dev_desc->sw_num)
+			continue;
+		sw_num = info.sw_num;
+
+		/*
+		 * Read each of the device's designated calibration registers,
+		 * if any, and exit from the inner loop early if any are equal
+		 * to zero.
+		 */
+		for (j = 0; j < iqs62x->dev_desc->num_cal_regs; j++) {
+			ret = regmap_read(iqs62x->map,
+					  iqs62x->dev_desc->cal_regs[j], &val);
+			if (ret)
+				return ret;
+
+			if (!val)
+				break;
+		}
+
+		/*
+		 * If the number of nonzero values read from the device equals
+		 * the number of designated calibration registers (which could
+		 * be zero), exit from the outer loop early to signal a device
+		 * has been matched.
+		 */
+		if (j == iqs62x->dev_desc->num_cal_regs)
+			break;
+	}
+
+	if (!iqs62x->dev_desc) {
+		dev_err(&client->dev, "Unrecognized product number: 0x%02X\n",
+			info.prod_num);
+		return -EINVAL;
+	}
+
+	if (!sw_num) {
+		dev_err(&client->dev, "Unrecognized software number: 0x%02X\n",
+			info.sw_num);
+		return -EINVAL;
+	}
+
+	if (i == IQS62X_NUM_DEV) {
+		dev_err(&client->dev, "Uncalibrated device\n");
+		return -ENODATA;
+	}
+
+	ret = regmap_write(iqs62x->map, IQS62X_SYS_SETTINGS,
+			   IQS62X_SYS_SETTINGS_SOFT_RESET);
+	if (ret)
+		return ret;
+	usleep_range(10000, 10100);
+
+	device_property_read_string(&client->dev, "firmware-name", &fw_name);
+
+	ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
+				      fw_name ? : iqs62x->dev_desc->fw_name,
+				      &client->dev, GFP_KERNEL, iqs62x,
+				      iqs62x_fw_cb);
+	if (ret)
+		dev_err(&client->dev, "Failed to request firmware: %d\n", ret);
+
+	return ret;
+}
+
+static int iqs62x_remove(struct i2c_client *client)
+{
+	struct iqs62x_core *iqs62x = i2c_get_clientdata(client);
+
+	wait_for_completion(&iqs62x->fw_done);
+
+	return 0;
+}
+
+static int __maybe_unused iqs62x_suspend(struct device *dev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(dev);
+	int ret;
+
+	wait_for_completion(&iqs62x->fw_done);
+
+	/*
+	 * As per the data sheet, automatic mode switching must be disabled
+	 * before the device is placed in or taken out of halt mode.
+	 */
+	ret = regmap_update_bits(iqs62x->map, IQS62X_PWR_SETTINGS,
+				 IQS62X_PWR_SETTINGS_DIS_AUTO,
+				 IQS62X_PWR_SETTINGS_DIS_AUTO);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(iqs62x->map, IQS62X_PWR_SETTINGS,
+				  IQS62X_PWR_SETTINGS_PWR_MODE_MASK,
+				  IQS62X_PWR_SETTINGS_PWR_MODE_HALT);
+}
+
+static int __maybe_unused iqs62x_resume(struct device *dev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_update_bits(iqs62x->map, IQS62X_PWR_SETTINGS,
+				 IQS62X_PWR_SETTINGS_PWR_MODE_MASK,
+				 IQS62X_PWR_SETTINGS_PWR_MODE_NORM);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(iqs62x->map, IQS62X_PWR_SETTINGS,
+				  IQS62X_PWR_SETTINGS_DIS_AUTO, 0);
+}
+
+static SIMPLE_DEV_PM_OPS(iqs62x_pm, iqs62x_suspend, iqs62x_resume);
+
+static const struct of_device_id iqs62x_of_match[] = {
+	{ .compatible = "azoteq,iqs620a" },
+	{ .compatible = "azoteq,iqs621" },
+	{ .compatible = "azoteq,iqs622" },
+	{ .compatible = "azoteq,iqs624" },
+	{ .compatible = "azoteq,iqs625" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, iqs62x_of_match);
+
+static struct i2c_driver iqs62x_i2c_driver = {
+	.driver = {
+		.name = "iqs62x",
+		.of_match_table = iqs62x_of_match,
+		.pm = &iqs62x_pm,
+	},
+	.probe_new = iqs62x_probe,
+	.remove = iqs62x_remove,
+};
+module_i2c_driver(iqs62x_i2c_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Multi-Function Sensors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/iqs62x-tables.c b/drivers/mfd/iqs62x-tables.c
new file mode 100644
index 0000000..580f6ac
--- /dev/null
+++ b/drivers/mfd/iqs62x-tables.c
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620A/621/622/624/625 Multi-Function Sensors
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/iqs62x.h>
+
+#define IQS620_HALL_FLAGS			0x16
+#define IQS620_TEMP_CAL_MULT			0xC2
+#define IQS620_TEMP_CAL_DIV			0xC3
+#define IQS620_TEMP_CAL_OFFS			0xC4
+
+#define IQS621_HALL_FLAGS			0x19
+#define IQS621_ALS_CAL_DIV_LUX			0x82
+#define IQS621_ALS_CAL_DIV_IR			0x83
+
+#define IQS622_HALL_FLAGS			IQS621_HALL_FLAGS
+
+#define IQS624_INTERVAL_NUM			0x18
+#define IQS625_INTERVAL_NUM			0x12
+
+static const struct mfd_cell iqs620at_sub_devs[] = {
+	{
+		.name = IQS62X_DRV_NAME_KEYS,
+		.of_compatible = "azoteq,iqs620a-keys",
+	},
+	{
+		.name = IQS620_DRV_NAME_PWM,
+		.of_compatible = "azoteq,iqs620a-pwm",
+	},
+	{
+		.name = IQS620_DRV_NAME_TEMP,
+	},
+};
+
+static const struct mfd_cell iqs620a_sub_devs[] = {
+	{
+		.name = IQS62X_DRV_NAME_KEYS,
+		.of_compatible = "azoteq,iqs620a-keys",
+	},
+	{
+		.name = IQS620_DRV_NAME_PWM,
+		.of_compatible = "azoteq,iqs620a-pwm",
+	},
+};
+
+static const struct mfd_cell iqs621_sub_devs[] = {
+	{
+		.name = IQS62X_DRV_NAME_KEYS,
+		.of_compatible = "azoteq,iqs621-keys",
+	},
+	{
+		.name = IQS621_DRV_NAME_ALS,
+	},
+};
+
+static const struct mfd_cell iqs622_sub_devs[] = {
+	{
+		.name = IQS62X_DRV_NAME_KEYS,
+		.of_compatible = "azoteq,iqs622-keys",
+	},
+	{
+		.name = IQS621_DRV_NAME_ALS,
+	},
+};
+
+static const struct mfd_cell iqs624_sub_devs[] = {
+	{
+		.name = IQS62X_DRV_NAME_KEYS,
+		.of_compatible = "azoteq,iqs624-keys",
+	},
+	{
+		.name = IQS624_DRV_NAME_POS,
+	},
+};
+
+static const struct mfd_cell iqs625_sub_devs[] = {
+	{
+		.name = IQS62X_DRV_NAME_KEYS,
+		.of_compatible = "azoteq,iqs625-keys",
+	},
+	{
+		.name = IQS624_DRV_NAME_POS,
+	},
+};
+
+static const u8 iqs620at_cal_regs[] = {
+	IQS620_TEMP_CAL_MULT,
+	IQS620_TEMP_CAL_DIV,
+	IQS620_TEMP_CAL_OFFS,
+};
+
+static const u8 iqs621_cal_regs[] = {
+	IQS621_ALS_CAL_DIV_LUX,
+	IQS621_ALS_CAL_DIV_IR,
+};
+
+static const enum iqs62x_event_reg iqs620a_event_regs[][IQS62X_EVENT_SIZE] = {
+	[IQS62X_UI_PROX] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_PROX,	/* 0x12 */
+		IQS62X_EVENT_HYST,	/* 0x13 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_HALL,	/* 0x16 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+	},
+	[IQS62X_UI_SAR1] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_HYST,	/* 0x13 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_HALL,	/* 0x16 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+	},
+};
+
+static const enum iqs62x_event_reg iqs621_event_regs[][IQS62X_EVENT_SIZE] = {
+	[IQS62X_UI_PROX] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_PROX,	/* 0x12 */
+		IQS62X_EVENT_HYST,	/* 0x13 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_ALS,	/* 0x16 */
+		IQS62X_EVENT_UI_LO,	/* 0x17 */
+		IQS62X_EVENT_UI_HI,	/* 0x18 */
+		IQS62X_EVENT_HALL,	/* 0x19 */
+	},
+};
+
+static const enum iqs62x_event_reg iqs622_event_regs[][IQS62X_EVENT_SIZE] = {
+	[IQS62X_UI_PROX] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_PROX,	/* 0x12 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_ALS,	/* 0x14 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_IR,	/* 0x16 */
+		IQS62X_EVENT_UI_LO,	/* 0x17 */
+		IQS62X_EVENT_UI_HI,	/* 0x18 */
+		IQS62X_EVENT_HALL,	/* 0x19 */
+	},
+	[IQS62X_UI_SAR1] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_HYST,	/* 0x13 */
+		IQS62X_EVENT_ALS,	/* 0x14 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_IR,	/* 0x16 */
+		IQS62X_EVENT_UI_LO,	/* 0x17 */
+		IQS62X_EVENT_UI_HI,	/* 0x18 */
+		IQS62X_EVENT_HALL,	/* 0x19 */
+	},
+};
+
+static const enum iqs62x_event_reg iqs624_event_regs[][IQS62X_EVENT_SIZE] = {
+	[IQS62X_UI_PROX] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_PROX,	/* 0x12 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_WHEEL,	/* 0x14 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_UI_LO,	/* 0x16 */
+		IQS62X_EVENT_UI_HI,	/* 0x17 */
+		IQS62X_EVENT_INTER,	/* 0x18 */
+		IQS62X_EVENT_NONE,
+	},
+};
+
+static const enum iqs62x_event_reg iqs625_event_regs[][IQS62X_EVENT_SIZE] = {
+	[IQS62X_UI_PROX] = {
+		IQS62X_EVENT_SYS,	/* 0x10 */
+		IQS62X_EVENT_PROX,	/* 0x11 */
+		IQS62X_EVENT_INTER,	/* 0x12 */
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+		IQS62X_EVENT_NONE,
+	},
+};
+
+enum {
+	IQS620AT_DEV,
+	IQS620A_DEV,
+	IQS621_DEV,
+	IQS622_DEV,
+	IQS624_DEV,
+	IQS625_DEV,
+};
+
+const struct iqs62x_dev_desc iqs62x_devs[IQS62X_NUM_DEV] = {
+	[IQS620AT_DEV] = {
+		.dev_name	= "iqs620at",
+		.sub_devs	= iqs620at_sub_devs,
+		.num_sub_devs	= ARRAY_SIZE(iqs620at_sub_devs),
+
+		.prod_num	= IQS620_PROD_NUM,
+		.sw_num		= 0x08,
+		.cal_regs	= iqs620at_cal_regs,
+		.num_cal_regs	= ARRAY_SIZE(iqs620at_cal_regs),
+
+		.prox_mask	= BIT(0),
+		.sar_mask	= BIT(1) | BIT(7),
+		.hall_mask	= BIT(2),
+		.hyst_mask	= BIT(3),
+		.temp_mask	= BIT(4),
+
+		.hall_flags	= IQS620_HALL_FLAGS,
+
+		.clk_div	= 4,
+		.fw_name	= "iqs620a.bin",
+		.event_regs	= &iqs620a_event_regs[IQS62X_UI_PROX],
+	},
+	[IQS620A_DEV] = {
+		.dev_name	= "iqs620a",
+		.sub_devs	= iqs620a_sub_devs,
+		.num_sub_devs	= ARRAY_SIZE(iqs620a_sub_devs),
+
+		.prod_num	= IQS620_PROD_NUM,
+		.sw_num		= 0x08,
+
+		.prox_mask	= BIT(0),
+		.sar_mask	= BIT(1) | BIT(7),
+		.hall_mask	= BIT(2),
+		.hyst_mask	= BIT(3),
+		.temp_mask	= BIT(4),
+
+		.hall_flags	= IQS620_HALL_FLAGS,
+
+		.clk_div	= 4,
+		.fw_name	= "iqs620a.bin",
+		.event_regs	= &iqs620a_event_regs[IQS62X_UI_PROX],
+	},
+	[IQS621_DEV] = {
+		.dev_name	= "iqs621",
+		.sub_devs	= iqs621_sub_devs,
+		.num_sub_devs	= ARRAY_SIZE(iqs621_sub_devs),
+
+		.prod_num	= IQS621_PROD_NUM,
+		.sw_num		= 0x09,
+		.cal_regs	= iqs621_cal_regs,
+		.num_cal_regs	= ARRAY_SIZE(iqs621_cal_regs),
+
+		.prox_mask	= BIT(0),
+		.hall_mask	= BIT(1),
+		.als_mask	= BIT(2),
+		.hyst_mask	= BIT(3),
+		.temp_mask	= BIT(4),
+
+		.als_flags	= IQS621_ALS_FLAGS,
+		.hall_flags	= IQS621_HALL_FLAGS,
+		.hyst_shift	= 5,
+
+		.clk_div	= 2,
+		.fw_name	= "iqs621.bin",
+		.event_regs	= &iqs621_event_regs[IQS62X_UI_PROX],
+	},
+	[IQS622_DEV] = {
+		.dev_name	= "iqs622",
+		.sub_devs	= iqs622_sub_devs,
+		.num_sub_devs	= ARRAY_SIZE(iqs622_sub_devs),
+
+		.prod_num	= IQS622_PROD_NUM,
+		.sw_num		= 0x06,
+
+		.prox_mask	= BIT(0),
+		.sar_mask	= BIT(1),
+		.hall_mask	= BIT(2),
+		.als_mask	= BIT(3),
+		.ir_mask	= BIT(4),
+
+		.als_flags	= IQS622_ALS_FLAGS,
+		.hall_flags	= IQS622_HALL_FLAGS,
+
+		.clk_div	= 2,
+		.fw_name	= "iqs622.bin",
+		.event_regs	= &iqs622_event_regs[IQS62X_UI_PROX],
+	},
+	[IQS624_DEV] = {
+		.dev_name	= "iqs624",
+		.sub_devs	= iqs624_sub_devs,
+		.num_sub_devs	= ARRAY_SIZE(iqs624_sub_devs),
+
+		.prod_num	= IQS624_PROD_NUM,
+		.sw_num		= 0x0B,
+
+		.interval	= IQS624_INTERVAL_NUM,
+		.interval_div	= 3,
+
+		.clk_div	= 2,
+		.fw_name	= "iqs624.bin",
+		.event_regs	= &iqs624_event_regs[IQS62X_UI_PROX],
+	},
+	[IQS625_DEV] = {
+		.dev_name	= "iqs625",
+		.sub_devs	= iqs625_sub_devs,
+		.num_sub_devs	= ARRAY_SIZE(iqs625_sub_devs),
+
+		.prod_num	= IQS625_PROD_NUM,
+		.sw_num		= 0x0B,
+
+		.interval	= IQS625_INTERVAL_NUM,
+		.interval_div	= 10,
+
+		.clk_div	= 2,
+		.fw_name	= "iqs625.bin",
+		.event_regs	= &iqs625_event_regs[IQS62X_UI_PROX],
+	},
+};
+EXPORT_SYMBOL_GPL(iqs62x_devs);
+
+const struct iqs62x_event_desc iqs62x_events[IQS62X_NUM_EVENTS] = {
+	[IQS62X_EVENT_PROX_CH0_T] = {
+		.reg	= IQS62X_EVENT_PROX,
+		.mask	= BIT(4),
+		.val	= BIT(4),
+	},
+	[IQS62X_EVENT_PROX_CH0_P] = {
+		.reg	= IQS62X_EVENT_PROX,
+		.mask	= BIT(0),
+		.val	= BIT(0),
+	},
+	[IQS62X_EVENT_PROX_CH1_T] = {
+		.reg	= IQS62X_EVENT_PROX,
+		.mask	= BIT(5),
+		.val	= BIT(5),
+	},
+	[IQS62X_EVENT_PROX_CH1_P] = {
+		.reg	= IQS62X_EVENT_PROX,
+		.mask	= BIT(1),
+		.val	= BIT(1),
+	},
+	[IQS62X_EVENT_PROX_CH2_T] = {
+		.reg	= IQS62X_EVENT_PROX,
+		.mask	= BIT(6),
+		.val	= BIT(6),
+	},
+	[IQS62X_EVENT_PROX_CH2_P] = {
+		.reg	= IQS62X_EVENT_PROX,
+		.mask	= BIT(2),
+		.val	= BIT(2),
+	},
+	[IQS62X_EVENT_HYST_POS_T] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(6) | BIT(7),
+		.val	= BIT(6),
+	},
+	[IQS62X_EVENT_HYST_POS_P] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(5) | BIT(7),
+		.val	= BIT(5),
+	},
+	[IQS62X_EVENT_HYST_NEG_T] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(6) | BIT(7),
+		.val	= BIT(6) | BIT(7),
+	},
+	[IQS62X_EVENT_HYST_NEG_P] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(5) | BIT(7),
+		.val	= BIT(5) | BIT(7),
+	},
+	[IQS62X_EVENT_SAR1_ACT] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(4),
+		.val	= BIT(4),
+	},
+	[IQS62X_EVENT_SAR1_QRD] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(2),
+		.val	= BIT(2),
+	},
+	[IQS62X_EVENT_SAR1_MOVE] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(1),
+		.val	= BIT(1),
+	},
+	[IQS62X_EVENT_SAR1_HALT] = {
+		.reg	= IQS62X_EVENT_HYST,
+		.mask	= BIT(0),
+		.val	= BIT(0),
+	},
+	[IQS62X_EVENT_WHEEL_UP] = {
+		.reg	= IQS62X_EVENT_WHEEL,
+		.mask	= BIT(7) | BIT(6),
+		.val	= BIT(7),
+	},
+	[IQS62X_EVENT_WHEEL_DN] = {
+		.reg	= IQS62X_EVENT_WHEEL,
+		.mask	= BIT(7) | BIT(6),
+		.val	= BIT(7) | BIT(6),
+	},
+	[IQS62X_EVENT_HALL_N_T] = {
+		.reg	= IQS62X_EVENT_HALL,
+		.mask	= BIT(2) | BIT(0),
+		.val	= BIT(2),
+	},
+	[IQS62X_EVENT_HALL_N_P] = {
+		.reg	= IQS62X_EVENT_HALL,
+		.mask	= BIT(1) | BIT(0),
+		.val	= BIT(1),
+	},
+	[IQS62X_EVENT_HALL_S_T] = {
+		.reg	= IQS62X_EVENT_HALL,
+		.mask	= BIT(2) | BIT(0),
+		.val	= BIT(2) | BIT(0),
+	},
+	[IQS62X_EVENT_HALL_S_P] = {
+		.reg	= IQS62X_EVENT_HALL,
+		.mask	= BIT(1) | BIT(0),
+		.val	= BIT(1) | BIT(0),
+	},
+	[IQS62X_EVENT_SYS_RESET] = {
+		.reg	= IQS62X_EVENT_SYS,
+		.mask	= BIT(7),
+		.val	= BIT(7),
+	},
+};
+EXPORT_SYMBOL_GPL(iqs62x_events);
diff --git a/include/linux/mfd/iqs62x.h b/include/linux/mfd/iqs62x.h
new file mode 100644
index 0000000..0dc5997
--- /dev/null
+++ b/include/linux/mfd/iqs62x.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Azoteq IQS620A/621/622/624/625 Multi-Function Sensors
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#ifndef __LINUX_MFD_IQS62X_H
+#define __LINUX_MFD_IQS62X_H
+
+#define IQS620_PROD_NUM				0x41
+#define IQS621_PROD_NUM				0x46
+#define IQS622_PROD_NUM				0x42
+#define IQS624_PROD_NUM				0x43
+#define IQS625_PROD_NUM				0x4E
+
+#define IQS621_ALS_FLAGS			0x16
+#define IQS622_ALS_FLAGS			0x14
+
+#define IQS624_HALL_UI				0x70
+#define IQS624_HALL_UI_WHL_EVENT		BIT(4)
+#define IQS624_HALL_UI_INT_EVENT		BIT(3)
+#define IQS624_HALL_UI_AUTO_CAL			BIT(2)
+
+#define IQS624_INTERVAL_DIV			0x7D
+
+#define IQS620_GLBL_EVENT_MASK			0xD7
+#define IQS620_GLBL_EVENT_MASK_PMU		BIT(6)
+
+#define IQS62X_NUM_DEV				6
+#define IQS62X_NUM_KEYS				16
+#define IQS62X_NUM_EVENTS			(IQS62X_NUM_KEYS + 5)
+
+#define IQS62X_EVENT_SIZE			10
+
+#define IQS62X_DRV_NAME_KEYS			"iqs62x-keys"
+#define IQS620_DRV_NAME_TEMP			"iqs620at-temp"
+#define IQS620_DRV_NAME_PWM			"iqs620a-pwm"
+#define IQS621_DRV_NAME_ALS			"iqs621-als"
+#define IQS624_DRV_NAME_POS			"iqs624-pos"
+
+enum iqs62x_ui_sel {
+	IQS62X_UI_PROX,
+	IQS62X_UI_SAR1,
+};
+
+enum iqs62x_event_reg {
+	IQS62X_EVENT_NONE,
+	IQS62X_EVENT_SYS,
+	IQS62X_EVENT_PROX,
+	IQS62X_EVENT_HYST,
+	IQS62X_EVENT_HALL,
+	IQS62X_EVENT_ALS,
+	IQS62X_EVENT_IR,
+	IQS62X_EVENT_WHEEL,
+	IQS62X_EVENT_INTER,
+	IQS62X_EVENT_UI_LO,
+	IQS62X_EVENT_UI_HI,
+};
+
+enum iqs62x_event_flag {
+	/* keys */
+	IQS62X_EVENT_PROX_CH0_T,
+	IQS62X_EVENT_PROX_CH0_P,
+	IQS62X_EVENT_PROX_CH1_T,
+	IQS62X_EVENT_PROX_CH1_P,
+	IQS62X_EVENT_PROX_CH2_T,
+	IQS62X_EVENT_PROX_CH2_P,
+	IQS62X_EVENT_HYST_POS_T,
+	IQS62X_EVENT_HYST_POS_P,
+	IQS62X_EVENT_HYST_NEG_T,
+	IQS62X_EVENT_HYST_NEG_P,
+	IQS62X_EVENT_SAR1_ACT,
+	IQS62X_EVENT_SAR1_QRD,
+	IQS62X_EVENT_SAR1_MOVE,
+	IQS62X_EVENT_SAR1_HALT,
+	IQS62X_EVENT_WHEEL_UP,
+	IQS62X_EVENT_WHEEL_DN,
+
+	/* switches */
+	IQS62X_EVENT_HALL_N_T,
+	IQS62X_EVENT_HALL_N_P,
+	IQS62X_EVENT_HALL_S_T,
+	IQS62X_EVENT_HALL_S_P,
+
+	/* everything else */
+	IQS62X_EVENT_SYS_RESET,
+};
+
+struct iqs62x_event_data {
+	u16 ui_data;
+	u8 als_flags;
+	u8 ir_flags;
+	u8 interval;
+};
+
+struct iqs62x_event_desc {
+	enum iqs62x_event_reg reg;
+	u8 mask;
+	u8 val;
+};
+
+struct iqs62x_dev_desc {
+	const char *dev_name;
+	const struct mfd_cell *sub_devs;
+	int num_sub_devs;
+
+	u8 prod_num;
+	u8 sw_num;
+	const u8 *cal_regs;
+	int num_cal_regs;
+
+	u8 prox_mask;
+	u8 sar_mask;
+	u8 hall_mask;
+	u8 hyst_mask;
+	u8 temp_mask;
+	u8 als_mask;
+	u8 ir_mask;
+
+	u8 als_flags;
+	u8 hall_flags;
+	u8 hyst_shift;
+
+	u8 interval;
+	u8 interval_div;
+
+	u8 clk_div;
+	const char *fw_name;
+	const enum iqs62x_event_reg (*event_regs)[IQS62X_EVENT_SIZE];
+};
+
+struct iqs62x_core {
+	const struct iqs62x_dev_desc *dev_desc;
+	struct i2c_client *client;
+	struct regmap *map;
+	struct blocking_notifier_head nh;
+	struct list_head fw_blk_head;
+	struct completion fw_done;
+	enum iqs62x_ui_sel ui_sel;
+};
+
+extern const struct iqs62x_dev_desc iqs62x_devs[IQS62X_NUM_DEV];
+extern const struct iqs62x_event_desc iqs62x_events[IQS62X_NUM_EVENTS];
+
+#endif /* __LINUX_MFD_IQS62X_H */
--
2.7.4


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v3 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  2020-01-06  0:47 [PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
                   ` (2 preceding siblings ...)
  2020-01-06  0:48 ` [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator Jeff LaBundy
@ 2020-01-06  0:48 ` Jeff LaBundy
  2020-01-06  0:48 ` [PATCH v3 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor Jeff LaBundy
                   ` (2 subsequent siblings)
  6 siblings, 0 replies; 12+ messages in thread
From: Jeff LaBundy @ 2020-01-06  0:48 UTC (permalink / raw)
  To: lee.jones, dmitry.torokhov, thierry.reding, jic23, devicetree
  Cc: linux-input, u.kleine-koenig, linux-pwm, knaack.h, lars, pmeerw,
	linux-iio, robh+dt, mark.rutland, Jeff LaBundy

This patch adds key and switch support for the Azoteq IQS620A,
IQS621, IQS622, IQS624 and IQS625 multi-function sensors.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
Changes in v3:
  - None

Changes in v2:
  - Merged 'Copyright' and 'Author' lines into one in introductory comments
  - Replaced 'error' with 'ret' throughout
  - Updated iqs62x_keys_parse_prop to use unified device property interface
  - Clarified the comment in iqs62x_keys_notifier to state that wheel up or
    down events elicit an emulated release cycle
  - Eliminated tabbed alignment of platform_driver struct members

 drivers/input/keyboard/Kconfig       |  10 ++
 drivers/input/keyboard/Makefile      |   1 +
 drivers/input/keyboard/iqs62x-keys.c | 340 +++++++++++++++++++++++++++++++++++
 3 files changed, 351 insertions(+)
 create mode 100644 drivers/input/keyboard/iqs62x-keys.c

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 4706ff0..28de965 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -663,6 +663,16 @@ config KEYBOARD_IPAQ_MICRO
 	  To compile this driver as a module, choose M here: the
 	  module will be called ipaq-micro-keys.

+config KEYBOARD_IQS62X
+	tristate "Azoteq IQS620A/621/622/624/625 keys and switches"
+	depends on MFD_IQS62X
+	help
+	  Say Y here to enable key and switch support for the Azoteq IQS620A,
+	  IQS621, IQS622, IQS624 and IQS625 multi-function sensors.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called iqs62x-keys.
+
 config KEYBOARD_OMAP
 	tristate "TI OMAP keypad support"
 	depends on ARCH_OMAP1
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index f5b1752..1d689fd 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_KEYBOARD_TCA8418)		+= tca8418_keypad.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
 obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)	+= ipaq-micro-keys.o
+obj-$(CONFIG_KEYBOARD_IQS62X)		+= iqs62x-keys.o
 obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
 obj-$(CONFIG_KEYBOARD_IMX_SC_KEY)	+= imx_sc_key.o
 obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
diff --git a/drivers/input/keyboard/iqs62x-keys.c b/drivers/input/keyboard/iqs62x-keys.c
new file mode 100644
index 0000000..b477334
--- /dev/null
+++ b/drivers/input/keyboard/iqs62x-keys.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620A/621/622/624/625 Keys and Switches
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+enum {
+	IQS62X_SW_HALL_N,
+	IQS62X_SW_HALL_S,
+};
+
+static const char * const iqs62x_switch_names[] = {
+	[IQS62X_SW_HALL_N] = "hall-switch-north",
+	[IQS62X_SW_HALL_S] = "hall-switch-south",
+};
+
+struct iqs62x_switch_desc {
+	enum iqs62x_event_flag flag;
+	unsigned int code;
+	bool enabled;
+};
+
+struct iqs62x_keys_private {
+	struct iqs62x_core *iqs62x;
+	struct input_dev *input;
+	struct notifier_block notifier;
+	struct iqs62x_switch_desc switches[ARRAY_SIZE(iqs62x_switch_names)];
+	unsigned int keycode[IQS62X_NUM_KEYS];
+	unsigned int keycodemax;
+	u8 interval;
+};
+
+static int iqs62x_keys_parse_prop(struct platform_device *pdev,
+				  struct iqs62x_keys_private *iqs62x_keys)
+{
+	struct fwnode_handle *child;
+	unsigned int val;
+	int ret, i;
+
+	ret = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
+					     NULL, 0);
+	if (ret > IQS62X_NUM_KEYS) {
+		dev_err(&pdev->dev, "Too many keycodes present\n");
+		return -EINVAL;
+	} else if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to count keycodes: %d\n", ret);
+		return ret;
+	}
+	iqs62x_keys->keycodemax = ret;
+
+	ret = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
+					     iqs62x_keys->keycode,
+					     iqs62x_keys->keycodemax);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to read keycodes: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
+		child = device_get_named_child_node(&pdev->dev,
+						    iqs62x_switch_names[i]);
+		if (!child)
+			continue;
+
+		ret = fwnode_property_read_u32(child, "linux,code", &val);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to read switch code: %d\n",
+				ret);
+			return ret;
+		}
+		iqs62x_keys->switches[i].code = val;
+		iqs62x_keys->switches[i].enabled = true;
+
+		if (fwnode_property_present(child, "azoteq,use-prox"))
+			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
+							 IQS62X_EVENT_HALL_N_P :
+							 IQS62X_EVENT_HALL_S_P);
+		else
+			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
+							 IQS62X_EVENT_HALL_N_T :
+							 IQS62X_EVENT_HALL_S_T);
+	}
+
+	return 0;
+}
+
+static int iqs62x_keys_init(struct iqs62x_keys_private *iqs62x_keys)
+{
+	struct iqs62x_core *iqs62x = iqs62x_keys->iqs62x;
+	enum iqs62x_event_flag flag;
+	unsigned int event_mask_reg;
+	unsigned int event_mask = 0;
+	unsigned int val;
+	int ret, i;
+
+	switch (iqs62x->dev_desc->prod_num) {
+	case IQS620_PROD_NUM:
+	case IQS621_PROD_NUM:
+	case IQS622_PROD_NUM:
+		event_mask_reg = IQS620_GLBL_EVENT_MASK;
+
+		/*
+		 * Discreet button, hysteresis and SAR UI flags represent keys
+		 * and are unmasked if mapped to a valid keycode.
+		 */
+		for (i = 0; i < iqs62x_keys->keycodemax; i++) {
+			if (iqs62x_keys->keycode[i] == KEY_RESERVED)
+				continue;
+
+			if (iqs62x_events[i].reg == IQS62X_EVENT_PROX)
+				event_mask |= iqs62x->dev_desc->prox_mask;
+			else if (iqs62x_events[i].reg == IQS62X_EVENT_HYST)
+				event_mask |= (iqs62x->dev_desc->hyst_mask |
+					       iqs62x->dev_desc->sar_mask);
+		}
+
+		ret = regmap_read(iqs62x->map, iqs62x->dev_desc->hall_flags,
+				  &val);
+		if (ret)
+			return ret;
+
+		/*
+		 * Hall UI flags represent switches and are unmasked if their
+		 * corresponding child nodes are present.
+		 */
+		for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
+			if (!(iqs62x_keys->switches[i].enabled))
+				continue;
+
+			flag = iqs62x_keys->switches[i].flag;
+
+			if (iqs62x_events[flag].reg != IQS62X_EVENT_HALL)
+				continue;
+
+			event_mask |= iqs62x->dev_desc->hall_mask;
+
+			input_report_switch(iqs62x_keys->input,
+					    iqs62x_keys->switches[i].code,
+					    (val & iqs62x_events[flag].mask) ==
+					    iqs62x_events[flag].val);
+		}
+
+		input_sync(iqs62x_keys->input);
+		break;
+
+	case IQS624_PROD_NUM:
+		event_mask_reg = IQS624_HALL_UI;
+
+		/*
+		 * Interval change events represent keys and are unmasked if
+		 * either wheel movement flag is mapped to a valid keycode.
+		 */
+		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP] != KEY_RESERVED)
+			event_mask |= IQS624_HALL_UI_INT_EVENT;
+
+		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN] != KEY_RESERVED)
+			event_mask |= IQS624_HALL_UI_INT_EVENT;
+
+		ret = regmap_read(iqs62x->map, iqs62x->dev_desc->interval,
+				  &val);
+		if (ret)
+			return ret;
+
+		iqs62x_keys->interval = val;
+		break;
+
+	default:
+		return 0;
+	}
+
+	return regmap_update_bits(iqs62x->map, event_mask_reg, event_mask, 0);
+}
+
+static int iqs62x_keys_notifier(struct notifier_block *notifier,
+				unsigned long event_flags, void *context)
+{
+	struct iqs62x_event_data *event_data = context;
+	struct iqs62x_keys_private *iqs62x_keys;
+	int ret, i;
+
+	iqs62x_keys = container_of(notifier, struct iqs62x_keys_private,
+				   notifier);
+
+	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
+		ret = iqs62x_keys_init(iqs62x_keys);
+		if (ret) {
+			dev_err(iqs62x_keys->input->dev.parent,
+				"Failed to re-initialize device: %d\n", ret);
+			return NOTIFY_BAD;
+		}
+
+		return NOTIFY_OK;
+	}
+
+	for (i = 0; i < iqs62x_keys->keycodemax; i++) {
+		if (iqs62x_events[i].reg == IQS62X_EVENT_WHEEL &&
+		    event_data->interval == iqs62x_keys->interval)
+			continue;
+
+		input_report_key(iqs62x_keys->input, iqs62x_keys->keycode[i],
+				 event_flags & BIT(i));
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
+		if (iqs62x_keys->switches[i].enabled)
+			input_report_switch(iqs62x_keys->input,
+					    iqs62x_keys->switches[i].code,
+					    event_flags &
+					    BIT(iqs62x_keys->switches[i].flag));
+
+	input_sync(iqs62x_keys->input);
+
+	if (event_data->interval == iqs62x_keys->interval)
+		return NOTIFY_OK;
+
+	/*
+	 * Each frame contains at most one wheel event (up or down), in which
+	 * case a complementary release cycle is emulated.
+	 */
+	if (event_flags & BIT(IQS62X_EVENT_WHEEL_UP)) {
+		input_report_key(iqs62x_keys->input,
+				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP],
+				 0);
+		input_sync(iqs62x_keys->input);
+	} else if (event_flags & BIT(IQS62X_EVENT_WHEEL_DN)) {
+		input_report_key(iqs62x_keys->input,
+				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN],
+				 0);
+		input_sync(iqs62x_keys->input);
+	}
+
+	iqs62x_keys->interval = event_data->interval;
+
+	return NOTIFY_OK;
+}
+
+static int iqs62x_keys_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iqs62x_keys_private *iqs62x_keys;
+	struct input_dev *input;
+	int ret, i;
+
+	iqs62x_keys = devm_kzalloc(&pdev->dev, sizeof(*iqs62x_keys),
+				   GFP_KERNEL);
+	if (!iqs62x_keys)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, iqs62x_keys);
+
+	ret = iqs62x_keys_parse_prop(pdev, iqs62x_keys);
+	if (ret)
+		return ret;
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->keycodemax = iqs62x_keys->keycodemax;
+	input->keycode = iqs62x_keys->keycode;
+	input->keycodesize = sizeof(*iqs62x_keys->keycode);
+
+	input->name = iqs62x->dev_desc->dev_name;
+	input->id.bustype = BUS_I2C;
+
+	__set_bit(EV_KEY, input->evbit);
+
+	for (i = 0; i < iqs62x_keys->keycodemax; i++)
+		__set_bit(iqs62x_keys->keycode[i], input->keybit);
+
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
+		if (iqs62x_keys->switches[i].enabled) {
+			__set_bit(EV_SW, input->evbit);
+			__set_bit(iqs62x_keys->switches[i].code, input->swbit);
+		}
+
+	iqs62x_keys->iqs62x = iqs62x;
+	iqs62x_keys->input = input;
+
+	ret = iqs62x_keys_init(iqs62x_keys);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize device: %d\n", ret);
+		return ret;
+	}
+
+	ret = input_register_device(iqs62x_keys->input);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register device: %d\n", ret);
+		return ret;
+	}
+
+	iqs62x_keys->notifier.notifier_call = iqs62x_keys_notifier;
+	ret = blocking_notifier_chain_register(&iqs62x_keys->iqs62x->nh,
+					       &iqs62x_keys->notifier);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+
+	return ret;
+}
+
+static int iqs62x_keys_remove(struct platform_device *pdev)
+{
+	struct iqs62x_keys_private *iqs62x_keys = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = blocking_notifier_chain_unregister(&iqs62x_keys->iqs62x->nh,
+						 &iqs62x_keys->notifier);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to unregister notifier: %d\n", ret);
+
+	return ret;
+}
+
+static struct platform_driver iqs62x_keys_platform_driver = {
+	.driver = {
+		.name = IQS62X_DRV_NAME_KEYS,
+	},
+	.probe = iqs62x_keys_probe,
+	.remove = iqs62x_keys_remove,
+};
+module_platform_driver(iqs62x_keys_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Keys and Switches");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" IQS62X_DRV_NAME_KEYS);
--
2.7.4


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  2020-01-06  0:47 [PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
  2020-01-06  0:48 ` [PATCH v3 1/7] dt-bindings: Add bindings " Jeff LaBundy
  2020-01-06  0:48 ` [PATCH v3 2/7] mfd: Add support " Jeff LaBundy
@ 2020-01-06  0:48 ` Jeff LaBundy
  2020-01-14  8:08   ` Uwe Kleine-König
  2020-01-06  0:48 ` [PATCH v3 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
                   ` (3 subsequent siblings)
  6 siblings, 1 reply; 12+ messages in thread
From: Jeff LaBundy @ 2020-01-06  0:48 UTC (permalink / raw)
  To: lee.jones, dmitry.torokhov, thierry.reding, jic23, devicetree
  Cc: linux-input, u.kleine-koenig, linux-pwm, knaack.h, lars, pmeerw,
	linux-iio, robh+dt, mark.rutland, Jeff LaBundy

This patch adds support for the Azoteq IQS620A, capable of generating
a 1-kHz PWM output with duty cycle between ~0.4% and 100% (inclusive).

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
Changes in v3:
  - Updated the commit message to say "~0.4%" instead of "0.4%"
  - Clarified the effect of duty cycle and state changes in the 'Limitations'
    section and added a restriction regarding 0% duty cycle
  - Added a comment in iqs620_pwm_apply to explain how duty cycle is derived
  - Updated iqs620_pwm_apply to disable the output first and enable it last to
    prevent temporarily driving a stale duty cycle
  - Rounded the calculation for duty cycle up and down in iqs620_pwm_get_state
    and iqs620_pwm_apply, respectively
  - Added a comment in iqs620_pwm_get_state to explain what it reports follow-
    ing requests to set duty cycle to 0%
  - Added a lock to prevent back-to-back access of IQS620_PWR_SETTINGS_PWM_OUT
    and IQS620_PWM_DUTY_CYCLE from being interrupted
  - Updated iqs620_pwm_notifier to reference pwm->state directly as opposed to
    calling pwm_get_state
  - Moved notifier unregistration back to a device-managed action
  - Added a completion to prevent iqs620_pwm_notifier from referencing the
    pwm_chip structure until it has been initialized by pwmchip_add

Changes in v2:
  - Merged 'Copyright' and 'Author' lines into one in introductory comments
  - Added 'Limitations' section to introductory comments
  - Replaced 'error' with 'ret' throughout
  - Added const qualifier to state argument of iqs620_pwm_apply and removed all
    modifications to the variable's contents
  - Updated iqs620_pwm_apply to return -ENOTSUPP or -EINVAL if the requested
    polarity is inverted or the requested period is below 1 ms, respectively
  - Updated iqs620_pwm_apply to disable the PWM output if duty cycle is zero
  - Added iqs620_pwm_get_state
  - Eliminated tabbed alignment of pwm_ops and platform_driver struct members
  - Moved notifier unregistration to already present iqs620_pwm_remove, which
    eliminated the need for a device-managed action and ready flag
  - Added a comment in iqs620_pwm_probe to explain the order of operations
  - Changed Kconfig "depends on" logic to MFD_IQS62X || COMPILE_TEST

 drivers/pwm/Kconfig       |  10 ++
 drivers/pwm/Makefile      |   1 +
 drivers/pwm/pwm-iqs620a.c | 254 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 265 insertions(+)
 create mode 100644 drivers/pwm/pwm-iqs620a.c

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index bd21655..60bcf6c 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -222,6 +222,16 @@ config PWM_IMX_TPM
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-imx-tpm.

+config PWM_IQS620A
+	tristate "Azoteq IQS620A PWM support"
+	depends on MFD_IQS62X || COMPILE_TEST
+	help
+	  Generic PWM framework driver for the Azoteq IQS620A multi-function
+	  sensor.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called pwm-iqs620a.
+
 config PWM_JZ4740
 	tristate "Ingenic JZ47xx PWM support"
 	depends on MACH_INGENIC
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 9a47507..a59c710 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_PWM_IMG)		+= pwm-img.o
 obj-$(CONFIG_PWM_IMX1)		+= pwm-imx1.o
 obj-$(CONFIG_PWM_IMX27)		+= pwm-imx27.o
 obj-$(CONFIG_PWM_IMX_TPM)	+= pwm-imx-tpm.o
+obj-$(CONFIG_PWM_IQS620A)	+= pwm-iqs620a.o
 obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
 obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
 obj-$(CONFIG_PWM_LPC18XX_SCT)	+= pwm-lpc18xx-sct.o
diff --git a/drivers/pwm/pwm-iqs620a.c b/drivers/pwm/pwm-iqs620a.c
new file mode 100644
index 0000000..ee5d8b5
--- /dev/null
+++ b/drivers/pwm/pwm-iqs620a.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620A PWM Generator
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ *
+ * Limitations:
+ * - The period is fixed to 1 ms and is generated continuously despite changes
+ *   to the duty cycle or enable/disable state.
+ * - Changes to the duty cycle or enable/disable state take effect immediately
+ *   and may result in a glitch during the period in which the change is made.
+ * - The device cannot generate a 0% duty cycle. For duty cycles below 1 / 256
+ *   ms, the output is disabled and relies upon an external pull-down resistor
+ *   to hold the GPIO3/LTX pin low.
+ */
+
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define IQS620_PWR_SETTINGS			0xD2
+#define IQS620_PWR_SETTINGS_PWM_OUT		BIT(7)
+
+#define IQS620_PWM_DUTY_CYCLE			0xD8
+
+#define IQS620_PWM_PERIOD_NS			1000000
+
+struct iqs620_pwm_private {
+	struct iqs62x_core *iqs62x;
+	struct pwm_chip chip;
+	struct notifier_block notifier;
+	struct completion chip_ready;
+	struct mutex lock;
+};
+
+static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	struct iqs620_pwm_private *iqs620_pwm;
+	struct iqs62x_core *iqs62x;
+	int duty_scale, ret;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -ENOTSUPP;
+
+	if (state->period < IQS620_PWM_PERIOD_NS)
+		return -EINVAL;
+
+	iqs620_pwm = container_of(chip, struct iqs620_pwm_private, chip);
+	iqs62x = iqs620_pwm->iqs62x;
+
+	mutex_lock(&iqs620_pwm->lock);
+
+	/*
+	 * The duty cycle generated by the device is calculated as follows:
+	 *
+	 * duty_cycle = (IQS620_PWM_DUTY_CYCLE + 1) / 256 * 1 ms
+	 *
+	 * ...where IQS620_PWM_DUTY_CYCLE is a register value between 0 and 255
+	 * (inclusive). Therefore the lowest duty cycle the device can generate
+	 * while the output is enabled is 1 / 256 ms.
+	 *
+	 * For lower duty cycles (e.g. 0), the PWM output is simply disabled to
+	 * allow an on-board pull-down resistor to hold the GPIO3/LTX pin low.
+	 */
+	duty_scale = state->duty_cycle * 256 / IQS620_PWM_PERIOD_NS;
+
+	if (!state->enabled || !duty_scale) {
+		ret = regmap_update_bits(iqs62x->map, IQS620_PWR_SETTINGS,
+					 IQS620_PWR_SETTINGS_PWM_OUT, 0);
+		if (ret)
+			goto err_mutex;
+	}
+
+	if (duty_scale) {
+		ret = regmap_write(iqs62x->map, IQS620_PWM_DUTY_CYCLE,
+				   min(duty_scale - 1, 0xFF));
+		if (ret)
+			goto err_mutex;
+	}
+
+	if (state->enabled && duty_scale)
+		ret = regmap_update_bits(iqs62x->map, IQS620_PWR_SETTINGS,
+					 IQS620_PWR_SETTINGS_PWM_OUT, 0xFF);
+
+err_mutex:
+	mutex_unlock(&iqs620_pwm->lock);
+
+	return ret;
+}
+
+static void iqs620_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	struct iqs620_pwm_private *iqs620_pwm;
+	struct iqs62x_core *iqs62x;
+	unsigned int val;
+	int ret;
+
+	iqs620_pwm = container_of(chip, struct iqs620_pwm_private, chip);
+	iqs62x = iqs620_pwm->iqs62x;
+
+	mutex_lock(&iqs620_pwm->lock);
+
+	/*
+	 * Since the device cannot generate a 0% duty cycle, requests to do so
+	 * cause subsequent calls to iqs620_pwm_get_state to report the output
+	 * as disabled with duty cycle equal to that which was in use prior to
+	 * the request. This is not ideal, but is the best compromise based on
+	 * the capabilities of the device.
+	 */
+	ret = regmap_read(iqs62x->map, IQS620_PWR_SETTINGS, &val);
+	if (ret)
+		goto err_mutex;
+	state->enabled = val & IQS620_PWR_SETTINGS_PWM_OUT;
+
+	ret = regmap_read(iqs62x->map, IQS620_PWM_DUTY_CYCLE, &val);
+	if (ret)
+		goto err_mutex;
+	state->duty_cycle = DIV_ROUND_UP((val + 1) * IQS620_PWM_PERIOD_NS, 256);
+	state->period = IQS620_PWM_PERIOD_NS;
+
+err_mutex:
+	mutex_unlock(&iqs620_pwm->lock);
+
+	if (ret)
+		dev_err(iqs620_pwm->chip.dev, "Failed to get state: %d\n", ret);
+}
+
+static int iqs620_pwm_notifier(struct notifier_block *notifier,
+			       unsigned long event_flags, void *context)
+{
+	struct iqs620_pwm_private *iqs620_pwm;
+	int ret;
+
+	iqs620_pwm = container_of(notifier, struct iqs620_pwm_private,
+				  notifier);
+
+	if (!completion_done(&iqs620_pwm->chip_ready) ||
+	    !(event_flags & BIT(IQS62X_EVENT_SYS_RESET)))
+		return NOTIFY_DONE;
+
+	ret = iqs620_pwm_apply(&iqs620_pwm->chip, &iqs620_pwm->chip.pwms[0],
+			       &iqs620_pwm->chip.pwms[0].state);
+	if (ret) {
+		dev_err(iqs620_pwm->chip.dev,
+			"Failed to re-initialize device: %d\n", ret);
+		return NOTIFY_BAD;
+	}
+
+	return NOTIFY_OK;
+}
+
+static const struct pwm_ops iqs620_pwm_ops = {
+	.apply = iqs620_pwm_apply,
+	.get_state = iqs620_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static void iqs620_pwm_notifier_unregister(void *context)
+{
+	struct iqs620_pwm_private *iqs620_pwm = context;
+	int ret;
+
+	ret = blocking_notifier_chain_unregister(&iqs620_pwm->iqs62x->nh,
+						 &iqs620_pwm->notifier);
+	if (ret)
+		dev_err(iqs620_pwm->chip.dev,
+			"Failed to unregister notifier: %d\n", ret);
+}
+
+static int iqs620_pwm_probe(struct platform_device *pdev)
+{
+	struct iqs620_pwm_private *iqs620_pwm;
+	int ret;
+
+	iqs620_pwm = devm_kzalloc(&pdev->dev, sizeof(*iqs620_pwm), GFP_KERNEL);
+	if (!iqs620_pwm)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, iqs620_pwm);
+	iqs620_pwm->iqs62x = dev_get_drvdata(pdev->dev.parent);
+
+	iqs620_pwm->chip.dev = &pdev->dev;
+	iqs620_pwm->chip.ops = &iqs620_pwm_ops;
+	iqs620_pwm->chip.base = -1;
+	iqs620_pwm->chip.npwm = 1;
+
+	init_completion(&iqs620_pwm->chip_ready);
+	mutex_init(&iqs620_pwm->lock);
+
+	iqs620_pwm->notifier.notifier_call = iqs620_pwm_notifier;
+	ret = blocking_notifier_chain_register(&iqs620_pwm->iqs62x->nh,
+					       &iqs620_pwm->notifier);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       iqs620_pwm_notifier_unregister,
+				       iqs620_pwm);
+	if (ret)
+		return ret;
+
+	ret = pwmchip_add(&iqs620_pwm->chip);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add device: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * pwmchip_add is called last to avoid a messy tear-down path, so the
+	 * following completion prevents iqs620_pwm_notifier from referencing
+	 * the pwm_chip structure until it has been completely initialized.
+	 */
+	complete_all(&iqs620_pwm->chip_ready);
+
+	return 0;
+}
+
+static int iqs620_pwm_remove(struct platform_device *pdev)
+{
+	struct iqs620_pwm_private *iqs620_pwm = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pwmchip_remove(&iqs620_pwm->chip);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to remove device: %d\n", ret);
+
+	return ret;
+}
+
+static struct platform_driver iqs620_pwm_platform_driver = {
+	.driver = {
+		.name = IQS620_DRV_NAME_PWM,
+	},
+	.probe = iqs620_pwm_probe,
+	.remove = iqs620_pwm_remove,
+};
+module_platform_driver(iqs620_pwm_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620A PWM Generator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" IQS620_DRV_NAME_PWM);
--
2.7.4


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v3 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  2020-01-06  0:47 [PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
                   ` (3 preceding siblings ...)
  2020-01-06  0:48 ` [PATCH v3 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
@ 2020-01-06  0:48 ` Jeff LaBundy
  2020-01-06  0:48 ` [PATCH v3 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors Jeff LaBundy
  2020-01-06  0:48 ` [PATCH v3 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors Jeff LaBundy
  6 siblings, 0 replies; 12+ messages in thread
From: Jeff LaBundy @ 2020-01-06  0:48 UTC (permalink / raw)
  To: lee.jones, dmitry.torokhov, thierry.reding, jic23, devicetree
  Cc: linux-input, u.kleine-koenig, linux-pwm, knaack.h, lars, pmeerw,
	linux-iio, robh+dt, mark.rutland, Jeff LaBundy

This patch adds support for the Azoteq IQS620AT temperature sensor,
capable of reporting its absolute die temperature.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
Changes in v3:
  - Added Reviewed-by trailer

Changes in v2:
  - Moved the driver from hwmon to iio
  - Merged 'Copyright' and 'Author' lines into one in introductory comments
  - Replaced 'error' with 'ret' throughout
  - Eliminated tabbed alignment of platform_driver struct members
  - Changed Kconfig "depends on" logic to MFD_IQS62X || COMPILE_TEST

 drivers/iio/temperature/Kconfig         | 10 ++++
 drivers/iio/temperature/Makefile        |  1 +
 drivers/iio/temperature/iqs620at-temp.c | 97 +++++++++++++++++++++++++++++++++
 3 files changed, 108 insertions(+)
 create mode 100644 drivers/iio/temperature/iqs620at-temp.c

diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index e1ccb40..f1f2a14 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -4,6 +4,16 @@
 #
 menu "Temperature sensors"

+config IQS620AT_TEMP
+	tristate "Azoteq IQS620AT temperature sensor"
+	depends on MFD_IQS62X || COMPILE_TEST
+	help
+	  Say Y here if you want to build support for the Azoteq IQS620AT
+	  temperature sensor.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called iqs620at-temp.
+
 config LTC2983
 	tristate "Analog Devices Multi-Sensor Digital Temperature Measurement System"
 	depends on SPI
diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
index d6b850b..90c1131 100644
--- a/drivers/iio/temperature/Makefile
+++ b/drivers/iio/temperature/Makefile
@@ -3,6 +3,7 @@
 # Makefile for industrial I/O temperature drivers
 #

+obj-$(CONFIG_IQS620AT_TEMP) += iqs620at-temp.o
 obj-$(CONFIG_LTC2983) += ltc2983.o
 obj-$(CONFIG_HID_SENSOR_TEMP) += hid-sensor-temperature.o
 obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o
diff --git a/drivers/iio/temperature/iqs620at-temp.c b/drivers/iio/temperature/iqs620at-temp.c
new file mode 100644
index 0000000..d20cb6ad
--- /dev/null
+++ b/drivers/iio/temperature/iqs620at-temp.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620AT Temperature Sensor
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define IQS620_TEMP_UI_OUT			0x1A
+
+#define IQS620_TEMP_SCALE			1000
+#define IQS620_TEMP_OFFSET			(-100)
+
+static int iqs620_temp_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	struct iqs62x_core *iqs62x = iio_device_get_drvdata(indio_dev);
+	int ret;
+	__le16 val_buf;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = regmap_raw_read(iqs62x->map, IQS620_TEMP_UI_OUT, &val_buf,
+				      sizeof(val_buf));
+		if (ret)
+			return ret;
+
+		*val = le16_to_cpu(val_buf);
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = IQS620_TEMP_SCALE;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_OFFSET:
+		*val = IQS620_TEMP_OFFSET;
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info iqs620_temp_info = {
+	.read_raw = &iqs620_temp_read_raw,
+};
+
+static const struct iio_chan_spec iqs620_temp_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OFFSET),
+	},
+};
+
+static int iqs620_temp_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, 0);
+	if (!indio_dev)
+		return -ENOMEM;
+
+	iio_device_set_drvdata(indio_dev, iqs62x);
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->channels = iqs620_temp_channels;
+	indio_dev->num_channels = ARRAY_SIZE(iqs620_temp_channels);
+	indio_dev->name = iqs62x->dev_desc->dev_name;
+	indio_dev->info = &iqs620_temp_info;
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static struct platform_driver iqs620_temp_platform_driver = {
+	.driver = {
+		.name = IQS620_DRV_NAME_TEMP,
+	},
+	.probe = iqs620_temp_probe,
+};
+module_platform_driver(iqs620_temp_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620AT Temperature Sensor");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" IQS620_DRV_NAME_TEMP);
--
2.7.4


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v3 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
  2020-01-06  0:47 [PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
                   ` (4 preceding siblings ...)
  2020-01-06  0:48 ` [PATCH v3 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor Jeff LaBundy
@ 2020-01-06  0:48 ` Jeff LaBundy
  2020-01-06  0:48 ` [PATCH v3 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors Jeff LaBundy
  6 siblings, 0 replies; 12+ messages in thread
From: Jeff LaBundy @ 2020-01-06  0:48 UTC (permalink / raw)
  To: lee.jones, dmitry.torokhov, thierry.reding, jic23, devicetree
  Cc: linux-input, u.kleine-koenig, linux-pwm, knaack.h, lars, pmeerw,
	linux-iio, robh+dt, mark.rutland, Jeff LaBundy

This patch adds support for the Azoteq IQS621 and IQS622 ambient light
sensors, both of which can report a four-bit representation of ambient
light intensity.

The IQS621 can additionally report illuminace directly in units of lux,
while the IQS622 can report a four-bit representation of infrared light
intensity. Furthermore, the IQS622 can report a unitless measurement of
a target's proximity to the device.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
Changes in v3:
  - Added Reviewed-by trailer

Changes in v2:
  - Merged 'Copyright' and 'Author' lines into one in introductory comments
  - Replaced 'error' with 'ret' throughout
  - Merged support for the closely related IQS622 (formerly represented by
    a separate iio/proximity driver)
  - Added support for unitless ambient light intensity (IQS621 and IQS622)
    and infrared light intensity (IQS622 only)
  - Moved the read of IQS621_ALS_FLAGS to iqs621_als_write_event_config to
    account for the fact that IQS621_ALS_FLAGS may have changed in between
    having first been read in iqs621_als_init and the time at which events
    are enabled, thereby eliminating the need to call iqs621_als_init from
    iqs621_als_probe
  - Refactored the logic in iqs621_als_notifier and added a lock to safely
    evaluate variables that may change in response to user action
  - Added locks to iqs621_als_read_event_config/value to account for cases in
    which the corresponding hardware state is in the process of being updated
  - Refactored the logic in iqs621_als_read/write_event_value and removed all
    #defines that could instead be represented by simple math
  - Based the decision whether to select the IQS622 IR touch vs. proximity
    threshold on the single proximity threshold written by user space, and
    added a comment to describe the difference between either threshold
  - Replaced IIO_CHAN_INFO_RAW with IIO_CHAN_INFO_PROCESSED for the IIO_LIGHT
    channel (IQS621 only)
  - Removed devm_add_action_or_reset failure message
  - Eliminated tabbed alignment of platform_driver struct members
  - Changed Kconfig "depends on" logic to MFD_IQS62X || COMPILE_TEST

 drivers/iio/light/Kconfig      |  10 +
 drivers/iio/light/Makefile     |   1 +
 drivers/iio/light/iqs621-als.c | 614 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 625 insertions(+)
 create mode 100644 drivers/iio/light/iqs621-als.c

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 9968f98..baf7958b 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -173,6 +173,16 @@ config GP2AP020A00F
 	  To compile this driver as a module, choose M here: the
 	  module will be called gp2ap020a00f.

+config IQS621_ALS
+	tristate "Azoteq IQS621/622 ambient light sensors"
+	depends on MFD_IQS62X || COMPILE_TEST
+	help
+	  Say Y here if you want to build support for the Azoteq IQS621
+	  and IQS622 ambient light sensors.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called iqs621-als.
+
 config SENSORS_ISL29018
 	tristate "Intersil 29018 light and proximity sensor"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index c98d1ce..988e8f4 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_IIO_CROS_EC_LIGHT_PROX) += cros_ec_light_prox.o
 obj-$(CONFIG_GP2AP020A00F)	+= gp2ap020a00f.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
 obj-$(CONFIG_HID_SENSOR_PROX)	+= hid-sensor-prox.o
+obj-$(CONFIG_IQS621_ALS)	+= iqs621-als.o
 obj-$(CONFIG_SENSORS_ISL29018)	+= isl29018.o
 obj-$(CONFIG_SENSORS_ISL29028)	+= isl29028.o
 obj-$(CONFIG_ISL29125)		+= isl29125.o
diff --git a/drivers/iio/light/iqs621-als.c b/drivers/iio/light/iqs621-als.c
new file mode 100644
index 0000000..a4dd718
--- /dev/null
+++ b/drivers/iio/light/iqs621-als.c
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS621/622 Ambient Light Sensors
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define IQS621_ALS_FLAGS_LIGHT			BIT(7)
+#define IQS621_ALS_FLAGS_RANGE			GENMASK(3, 0)
+
+#define IQS621_ALS_UI_OUT			0x17
+
+#define IQS621_ALS_THRESH_DARK			0x80
+#define IQS621_ALS_THRESH_LIGHT			0x81
+
+#define IQS622_IR_RANGE				0x15
+#define IQS622_IR_FLAGS				0x16
+#define IQS622_IR_FLAGS_TOUCH			BIT(1)
+#define IQS622_IR_FLAGS_PROX			BIT(0)
+
+#define IQS622_IR_UI_OUT			0x17
+
+#define IQS622_IR_THRESH_PROX			0x91
+#define IQS622_IR_THRESH_TOUCH			0x92
+
+struct iqs621_als_private {
+	struct iqs62x_core *iqs62x;
+	struct notifier_block notifier;
+	struct mutex lock;
+	bool light_en;
+	bool range_en;
+	bool prox_en;
+	u8 als_flags;
+	u8 ir_flags_mask;
+	u8 ir_flags;
+	u8 thresh_light;
+	u8 thresh_dark;
+	u8 thresh_prox;
+};
+
+static int iqs621_als_init(struct iqs621_als_private *iqs621_als)
+{
+	struct iqs62x_core *iqs62x = iqs621_als->iqs62x;
+	unsigned int event_mask = 0;
+	int ret;
+
+	switch (iqs621_als->ir_flags_mask) {
+	case IQS622_IR_FLAGS_TOUCH:
+		ret = regmap_write(iqs62x->map, IQS622_IR_THRESH_TOUCH,
+				   iqs621_als->thresh_prox);
+		break;
+
+	case IQS622_IR_FLAGS_PROX:
+		ret = regmap_write(iqs62x->map, IQS622_IR_THRESH_PROX,
+				   iqs621_als->thresh_prox);
+		break;
+
+	default:
+		ret = regmap_write(iqs62x->map, IQS621_ALS_THRESH_LIGHT,
+				   iqs621_als->thresh_light);
+		if (ret)
+			return ret;
+
+		ret = regmap_write(iqs62x->map, IQS621_ALS_THRESH_DARK,
+				   iqs621_als->thresh_dark);
+	}
+
+	if (ret)
+		return ret;
+
+	if (iqs621_als->light_en || iqs621_als->range_en)
+		event_mask |= iqs62x->dev_desc->als_mask;
+
+	if (iqs621_als->prox_en)
+		event_mask |= iqs62x->dev_desc->ir_mask;
+
+	return regmap_update_bits(iqs62x->map, IQS620_GLBL_EVENT_MASK,
+				  event_mask, 0);
+}
+
+static int iqs621_als_notifier(struct notifier_block *notifier,
+			       unsigned long event_flags, void *context)
+{
+	struct iqs62x_event_data *event_data = context;
+	struct iqs621_als_private *iqs621_als;
+	struct iio_dev *indio_dev;
+	bool light_new, light_old;
+	bool prox_new, prox_old;
+	u8 range_new, range_old;
+	s64 timestamp;
+	int ret;
+
+	iqs621_als = container_of(notifier, struct iqs621_als_private,
+				  notifier);
+	indio_dev = iio_priv_to_dev(iqs621_als);
+	timestamp = iio_get_time_ns(indio_dev);
+
+	mutex_lock(&iqs621_als->lock);
+
+	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
+		ret = iqs621_als_init(iqs621_als);
+		if (ret) {
+			dev_err(indio_dev->dev.parent,
+				"Failed to re-initialize device: %d\n", ret);
+			ret = NOTIFY_BAD;
+		} else {
+			ret = NOTIFY_OK;
+		}
+
+		goto err_mutex;
+	}
+
+	if (!iqs621_als->light_en && !iqs621_als->range_en &&
+	    !iqs621_als->prox_en) {
+		ret = NOTIFY_DONE;
+		goto err_mutex;
+	}
+
+	/* IQS621 only */
+	light_new = event_data->als_flags & IQS621_ALS_FLAGS_LIGHT;
+	light_old = iqs621_als->als_flags & IQS621_ALS_FLAGS_LIGHT;
+
+	if (iqs621_als->light_en && light_new && !light_old)
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_RISING),
+			       timestamp);
+	else if (iqs621_als->light_en && !light_new && light_old)
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_FALLING),
+			       timestamp);
+
+	/* IQS621 and IQS622 */
+	range_new = event_data->als_flags & IQS621_ALS_FLAGS_RANGE;
+	range_old = iqs621_als->als_flags & IQS621_ALS_FLAGS_RANGE;
+
+	if (iqs621_als->range_en && (range_new > range_old))
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_INTENSITY, 0,
+						    IIO_EV_TYPE_CHANGE,
+						    IIO_EV_DIR_RISING),
+			       timestamp);
+	else if (iqs621_als->range_en && (range_new < range_old))
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_INTENSITY, 0,
+						    IIO_EV_TYPE_CHANGE,
+						    IIO_EV_DIR_FALLING),
+			       timestamp);
+
+	/* IQS622 only */
+	prox_new = event_data->ir_flags & iqs621_als->ir_flags_mask;
+	prox_old = iqs621_als->ir_flags & iqs621_als->ir_flags_mask;
+
+	if (iqs621_als->prox_en && prox_new && !prox_old)
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_RISING),
+			       timestamp);
+	else if (iqs621_als->prox_en && !prox_new && prox_old)
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_FALLING),
+			       timestamp);
+
+	iqs621_als->als_flags = event_data->als_flags;
+	iqs621_als->ir_flags = event_data->ir_flags;
+	ret = NOTIFY_OK;
+
+err_mutex:
+	mutex_unlock(&iqs621_als->lock);
+
+	return ret;
+}
+
+static void iqs621_als_notifier_unregister(void *context)
+{
+	struct iqs621_als_private *iqs621_als = context;
+	struct iio_dev *indio_dev = iio_priv_to_dev(iqs621_als);
+	int ret;
+
+	ret = blocking_notifier_chain_unregister(&iqs621_als->iqs62x->nh,
+						 &iqs621_als->notifier);
+	if (ret)
+		dev_err(indio_dev->dev.parent,
+			"Failed to unregister notifier: %d\n", ret);
+}
+
+static int iqs621_als_read_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int *val, int *val2, long mask)
+{
+	struct iqs621_als_private *iqs621_als = iio_priv(indio_dev);
+	struct iqs62x_core *iqs62x = iqs621_als->iqs62x;
+	int ret;
+	__le16 val_buf;
+
+	switch (chan->type) {
+	case IIO_INTENSITY:
+		ret = regmap_read(iqs62x->map, chan->address, val);
+		if (ret)
+			return ret;
+
+		*val &= IQS621_ALS_FLAGS_RANGE;
+		return IIO_VAL_INT;
+
+	case IIO_PROXIMITY:
+	case IIO_LIGHT:
+		ret = regmap_raw_read(iqs62x->map, chan->address, &val_buf,
+				      sizeof(val_buf));
+		if (ret)
+			return ret;
+
+		*val = le16_to_cpu(val_buf);
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int iqs621_als_read_event_config(struct iio_dev *indio_dev,
+					const struct iio_chan_spec *chan,
+					enum iio_event_type type,
+					enum iio_event_direction dir)
+{
+	struct iqs621_als_private *iqs621_als = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&iqs621_als->lock);
+
+	switch (chan->type) {
+	case IIO_LIGHT:
+		ret = iqs621_als->light_en;
+		break;
+
+	case IIO_INTENSITY:
+		ret = iqs621_als->range_en;
+		break;
+
+	case IIO_PROXIMITY:
+		ret = iqs621_als->prox_en;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&iqs621_als->lock);
+
+	return ret;
+}
+
+static int iqs621_als_write_event_config(struct iio_dev *indio_dev,
+					 const struct iio_chan_spec *chan,
+					 enum iio_event_type type,
+					 enum iio_event_direction dir,
+					 int state)
+{
+	struct iqs621_als_private *iqs621_als = iio_priv(indio_dev);
+	struct iqs62x_core *iqs62x = iqs621_als->iqs62x;
+	unsigned int val;
+	int ret;
+
+	mutex_lock(&iqs621_als->lock);
+
+	ret = regmap_read(iqs62x->map, iqs62x->dev_desc->als_flags, &val);
+	if (ret)
+		goto err_mutex;
+	iqs621_als->als_flags = val;
+
+	switch (chan->type) {
+	case IIO_LIGHT:
+		ret = regmap_update_bits(iqs62x->map, IQS620_GLBL_EVENT_MASK,
+					 iqs62x->dev_desc->als_mask,
+					 iqs621_als->range_en | state ? 0 :
+									0xFF);
+		if (!ret)
+			iqs621_als->light_en = state;
+		break;
+
+	case IIO_INTENSITY:
+		ret = regmap_update_bits(iqs62x->map, IQS620_GLBL_EVENT_MASK,
+					 iqs62x->dev_desc->als_mask,
+					 iqs621_als->light_en | state ? 0 :
+									0xFF);
+		if (!ret)
+			iqs621_als->range_en = state;
+		break;
+
+	case IIO_PROXIMITY:
+		ret = regmap_read(iqs62x->map, IQS622_IR_FLAGS, &val);
+		if (ret)
+			goto err_mutex;
+		iqs621_als->ir_flags = val;
+
+		ret = regmap_update_bits(iqs62x->map, IQS620_GLBL_EVENT_MASK,
+					 iqs62x->dev_desc->ir_mask,
+					 state ? 0 : 0xFF);
+		if (!ret)
+			iqs621_als->prox_en = state;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+err_mutex:
+	mutex_unlock(&iqs621_als->lock);
+
+	return ret;
+}
+
+static int iqs621_als_read_event_value(struct iio_dev *indio_dev,
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir,
+				       enum iio_event_info info,
+				       int *val, int *val2)
+{
+	struct iqs621_als_private *iqs621_als = iio_priv(indio_dev);
+	int ret = IIO_VAL_INT;
+
+	mutex_lock(&iqs621_als->lock);
+
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		*val = iqs621_als->thresh_light * 16;
+		break;
+
+	case IIO_EV_DIR_FALLING:
+		*val = iqs621_als->thresh_dark * 4;
+		break;
+
+	case IIO_EV_DIR_EITHER:
+		if (iqs621_als->ir_flags_mask == IQS622_IR_FLAGS_TOUCH)
+			*val = iqs621_als->thresh_prox * 4;
+		else
+			*val = iqs621_als->thresh_prox;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&iqs621_als->lock);
+
+	return ret;
+}
+
+static int iqs621_als_write_event_value(struct iio_dev *indio_dev,
+					const struct iio_chan_spec *chan,
+					enum iio_event_type type,
+					enum iio_event_direction dir,
+					enum iio_event_info info,
+					int val, int val2)
+{
+	struct iqs621_als_private *iqs621_als = iio_priv(indio_dev);
+	struct iqs62x_core *iqs62x = iqs621_als->iqs62x;
+	unsigned int thresh_reg, thresh_val;
+	u8 ir_flags_mask, *thresh_cache;
+	int ret = -EINVAL;
+
+	mutex_lock(&iqs621_als->lock);
+
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		thresh_reg = IQS621_ALS_THRESH_LIGHT;
+		thresh_val = val / 16;
+
+		thresh_cache = &iqs621_als->thresh_light;
+		ir_flags_mask = 0;
+		break;
+
+	case IIO_EV_DIR_FALLING:
+		thresh_reg = IQS621_ALS_THRESH_DARK;
+		thresh_val = val / 4;
+
+		thresh_cache = &iqs621_als->thresh_dark;
+		ir_flags_mask = 0;
+		break;
+
+	case IIO_EV_DIR_EITHER:
+		/*
+		 * The IQS622 supports two detection thresholds, both measured
+		 * in the same arbitrary units reported by read_raw: proximity
+		 * (0 through 255 in steps of 1), and touch (0 through 1020 in
+		 * steps of 4).
+		 *
+		 * Based on the single detection threshold chosen by the user,
+		 * select the hardware threshold that gives the best trade-off
+		 * between range and resolution.
+		 *
+		 * By default, the close-range (but coarse) touch threshold is
+		 * chosen during probe.
+		 */
+		switch (val) {
+		case 0 ... 255:
+			thresh_reg = IQS622_IR_THRESH_PROX;
+			thresh_val = val;
+
+			ir_flags_mask = IQS622_IR_FLAGS_PROX;
+			break;
+
+		case 256 ... 1020:
+			thresh_reg = IQS622_IR_THRESH_TOUCH;
+			thresh_val = val / 4;
+
+			ir_flags_mask = IQS622_IR_FLAGS_TOUCH;
+			break;
+
+		default:
+			goto err_mutex;
+		}
+
+		thresh_cache = &iqs621_als->thresh_prox;
+		break;
+
+	default:
+		goto err_mutex;
+	}
+
+	if (thresh_val > 0xFF)
+		goto err_mutex;
+
+	ret = regmap_write(iqs62x->map, thresh_reg, thresh_val);
+	if (ret)
+		goto err_mutex;
+
+	*thresh_cache = thresh_val;
+	iqs621_als->ir_flags_mask = ir_flags_mask;
+
+err_mutex:
+	mutex_unlock(&iqs621_als->lock);
+
+	return ret;
+}
+
+static const struct iio_info iqs621_als_info = {
+	.read_raw = &iqs621_als_read_raw,
+	.read_event_config = iqs621_als_read_event_config,
+	.write_event_config = iqs621_als_write_event_config,
+	.read_event_value = iqs621_als_read_event_value,
+	.write_event_value = iqs621_als_write_event_value,
+};
+
+static const struct iio_event_spec iqs621_als_range_events[] = {
+	{
+		.type = IIO_EV_TYPE_CHANGE,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_event_spec iqs621_als_light_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	},
+};
+
+static const struct iio_chan_spec iqs621_als_channels[] = {
+	{
+		.type = IIO_INTENSITY,
+		.address = IQS621_ALS_FLAGS,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.event_spec = iqs621_als_range_events,
+		.num_event_specs = ARRAY_SIZE(iqs621_als_range_events),
+	},
+	{
+		.type = IIO_LIGHT,
+		.address = IQS621_ALS_UI_OUT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.event_spec = iqs621_als_light_events,
+		.num_event_specs = ARRAY_SIZE(iqs621_als_light_events),
+	},
+};
+
+static const struct iio_event_spec iqs622_als_prox_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+				 BIT(IIO_EV_INFO_VALUE),
+	},
+};
+
+static const struct iio_chan_spec iqs622_als_channels[] = {
+	{
+		.type = IIO_INTENSITY,
+		.channel2 = IIO_MOD_LIGHT_BOTH,
+		.address = IQS622_ALS_FLAGS,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.event_spec = iqs621_als_range_events,
+		.num_event_specs = ARRAY_SIZE(iqs621_als_range_events),
+		.modified = true,
+	},
+	{
+		.type = IIO_INTENSITY,
+		.channel2 = IIO_MOD_LIGHT_IR,
+		.address = IQS622_IR_RANGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.modified = true,
+	},
+	{
+		.type = IIO_PROXIMITY,
+		.address = IQS622_IR_UI_OUT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.event_spec = iqs622_als_prox_events,
+		.num_event_specs = ARRAY_SIZE(iqs622_als_prox_events),
+	},
+};
+
+static int iqs621_als_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iqs621_als_private *iqs621_als;
+	struct iio_dev *indio_dev;
+	unsigned int val;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*iqs621_als));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	iqs621_als = iio_priv(indio_dev);
+	iqs621_als->iqs62x = iqs62x;
+
+	if (iqs62x->dev_desc->prod_num == IQS622_PROD_NUM) {
+		ret = regmap_read(iqs62x->map, IQS622_IR_THRESH_TOUCH, &val);
+		if (ret)
+			return ret;
+		iqs621_als->thresh_prox = val;
+		iqs621_als->ir_flags_mask = IQS622_IR_FLAGS_TOUCH;
+
+		indio_dev->channels = iqs622_als_channels;
+		indio_dev->num_channels = ARRAY_SIZE(iqs622_als_channels);
+	} else {
+		ret = regmap_read(iqs62x->map, IQS621_ALS_THRESH_LIGHT, &val);
+		if (ret)
+			return ret;
+		iqs621_als->thresh_light = val;
+
+		ret = regmap_read(iqs62x->map, IQS621_ALS_THRESH_DARK, &val);
+		if (ret)
+			return ret;
+		iqs621_als->thresh_dark = val;
+
+		indio_dev->channels = iqs621_als_channels;
+		indio_dev->num_channels = ARRAY_SIZE(iqs621_als_channels);
+	}
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->name = iqs62x->dev_desc->dev_name;
+	indio_dev->info = &iqs621_als_info;
+
+	mutex_init(&iqs621_als->lock);
+
+	iqs621_als->notifier.notifier_call = iqs621_als_notifier;
+	ret = blocking_notifier_chain_register(&iqs621_als->iqs62x->nh,
+					       &iqs621_als->notifier);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       iqs621_als_notifier_unregister,
+				       iqs621_als);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static struct platform_driver iqs621_als_platform_driver = {
+	.driver = {
+		.name = IQS621_DRV_NAME_ALS,
+	},
+	.probe = iqs621_als_probe,
+};
+module_platform_driver(iqs621_als_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS621/622 Ambient Light Sensors");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" IQS621_DRV_NAME_ALS);
--
2.7.4


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v3 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  2020-01-06  0:47 [PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
                   ` (5 preceding siblings ...)
  2020-01-06  0:48 ` [PATCH v3 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors Jeff LaBundy
@ 2020-01-06  0:48 ` Jeff LaBundy
  6 siblings, 0 replies; 12+ messages in thread
From: Jeff LaBundy @ 2020-01-06  0:48 UTC (permalink / raw)
  To: lee.jones, dmitry.torokhov, thierry.reding, jic23, devicetree
  Cc: linux-input, u.kleine-koenig, linux-pwm, knaack.h, lars, pmeerw,
	linux-iio, robh+dt, mark.rutland, Jeff LaBundy

This patch adds support for the Azoteq IQS624 and IQS625 angular position
sensors, capable of reporting the angle of a rotating shaft down to 1 and
10 degrees of accuracy, respectively.

This patch also introduces a home for linear and angular position sensors.
Unlike resolvers, they are typically contactless and use the Hall effect.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
Changes in v3:
  - Added Reviewed-by trailer

Changes in v2:
  - Merged 'Copyright' and 'Author' lines into one in introductory comments
  - Replaced 'error' with 'ret' throughout
  - Added iqs624_pos_angle_en and iqs624_pos_angle_get to remove duplicate
    logic previously used throughout
  - Refactored the logic in iqs624_pos_notifier and added a lock to safely
    evaluate variables that may change in response to user action
  - Refactored the logic in iqs624_pos_read_raw
  - Added a lock to iqs624_pos_read_event_config to account for cases in which
    the corresponding hardware state is in the process of being updated
  - Refactored the logic in iqs624_pos_write_event_config and read the initial
    angle in case it changed since having first been read in iqs624_pos_init
  - Removed iqs624_pos_init as its logic has since been absorbed elsewhere
  - Removed devm_add_action_or_reset failure message
  - Eliminated tabbed alignment of platform_driver struct members
  - Changed Kconfig "depends on" logic to MFD_IQS62X || COMPILE_TEST

 drivers/iio/Kconfig               |   1 +
 drivers/iio/Makefile              |   1 +
 drivers/iio/position/Kconfig      |  19 +++
 drivers/iio/position/Makefile     |   7 +
 drivers/iio/position/iqs624-pos.c | 284 ++++++++++++++++++++++++++++++++++++++
 5 files changed, 312 insertions(+)
 create mode 100644 drivers/iio/position/Kconfig
 create mode 100644 drivers/iio/position/Makefile
 create mode 100644 drivers/iio/position/iqs624-pos.c

diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 5bd5185..d5c073a 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -88,6 +88,7 @@ source "drivers/iio/orientation/Kconfig"
 if IIO_TRIGGER
    source "drivers/iio/trigger/Kconfig"
 endif #IIO_TRIGGER
+source "drivers/iio/position/Kconfig"
 source "drivers/iio/potentiometer/Kconfig"
 source "drivers/iio/potentiostat/Kconfig"
 source "drivers/iio/pressure/Kconfig"
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index bff682a..1712011 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -31,6 +31,7 @@ obj-y += light/
 obj-y += magnetometer/
 obj-y += multiplexer/
 obj-y += orientation/
+obj-y += position/
 obj-y += potentiometer/
 obj-y += potentiostat/
 obj-y += pressure/
diff --git a/drivers/iio/position/Kconfig b/drivers/iio/position/Kconfig
new file mode 100644
index 0000000..eda67f0
--- /dev/null
+++ b/drivers/iio/position/Kconfig
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Linear and angular position sensors
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Linear and angular position sensors"
+
+config IQS624_POS
+	tristate "Azoteq IQS624/625 angular position sensors"
+	depends on MFD_IQS62X || COMPILE_TEST
+	help
+	  Say Y here if you want to build support for the Azoteq IQS624
+	  and IQS625 angular position sensors.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called iqs624-pos.
+
+endmenu
diff --git a/drivers/iio/position/Makefile b/drivers/iio/position/Makefile
new file mode 100644
index 0000000..3cbe7a7
--- /dev/null
+++ b/drivers/iio/position/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for IIO linear and angular position sensors
+#
+
+# When adding new entries keep the list in alphabetical order
+
+obj-$(CONFIG_IQS624_POS)	+= iqs624-pos.o
diff --git a/drivers/iio/position/iqs624-pos.c b/drivers/iio/position/iqs624-pos.c
new file mode 100644
index 0000000..af629bf5
--- /dev/null
+++ b/drivers/iio/position/iqs624-pos.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS624/625 Angular Position Sensors
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define IQS624_POS_DEG_OUT			0x16
+
+#define IQS624_POS_SCALE1			(314159 / 180)
+#define IQS624_POS_SCALE2			100000
+
+struct iqs624_pos_private {
+	struct iqs62x_core *iqs62x;
+	struct notifier_block notifier;
+	struct mutex lock;
+	bool angle_en;
+	u16 angle;
+};
+
+static int iqs624_pos_angle_en(struct iqs62x_core *iqs62x, bool angle_en)
+{
+	unsigned int event_mask = IQS624_HALL_UI_WHL_EVENT;
+
+	/*
+	 * The IQS625 reports angular position in the form of coarse intervals,
+	 * so only interval change events are unmasked. Conversely, the IQS624
+	 * reports angular position down to one degree of resolution, so wheel
+	 * movement events are unmasked instead.
+	 */
+	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
+		event_mask = IQS624_HALL_UI_INT_EVENT;
+
+	return regmap_update_bits(iqs62x->map, IQS624_HALL_UI, event_mask,
+				  angle_en ? 0 : 0xFF);
+}
+
+static int iqs624_pos_notifier(struct notifier_block *notifier,
+			       unsigned long event_flags, void *context)
+{
+	struct iqs62x_event_data *event_data = context;
+	struct iqs624_pos_private *iqs624_pos;
+	struct iqs62x_core *iqs62x;
+	struct iio_dev *indio_dev;
+	u16 angle = event_data->ui_data;
+	s64 timestamp;
+	int ret;
+
+	iqs624_pos = container_of(notifier, struct iqs624_pos_private,
+				  notifier);
+	indio_dev = iio_priv_to_dev(iqs624_pos);
+	timestamp = iio_get_time_ns(indio_dev);
+
+	iqs62x = iqs624_pos->iqs62x;
+	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
+		angle = event_data->interval;
+
+	mutex_lock(&iqs624_pos->lock);
+
+	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
+		ret = iqs624_pos_angle_en(iqs62x, iqs624_pos->angle_en);
+		if (ret) {
+			dev_err(indio_dev->dev.parent,
+				"Failed to re-initialize device: %d\n", ret);
+			ret = NOTIFY_BAD;
+		} else {
+			ret = NOTIFY_OK;
+		}
+	} else if (iqs624_pos->angle_en && (angle != iqs624_pos->angle)) {
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_ANGL, 0,
+						    IIO_EV_TYPE_CHANGE,
+						    IIO_EV_DIR_NONE),
+			       timestamp);
+
+		iqs624_pos->angle = angle;
+		ret = NOTIFY_OK;
+	} else {
+		ret = NOTIFY_DONE;
+	}
+
+	mutex_unlock(&iqs624_pos->lock);
+
+	return ret;
+}
+
+static void iqs624_pos_notifier_unregister(void *context)
+{
+	struct iqs624_pos_private *iqs624_pos = context;
+	struct iio_dev *indio_dev = iio_priv_to_dev(iqs624_pos);
+	int ret;
+
+	ret = blocking_notifier_chain_unregister(&iqs624_pos->iqs62x->nh,
+						 &iqs624_pos->notifier);
+	if (ret)
+		dev_err(indio_dev->dev.parent,
+			"Failed to unregister notifier: %d\n", ret);
+}
+
+static int iqs624_pos_angle_get(struct iqs62x_core *iqs62x, unsigned int *val)
+{
+	int ret;
+	__le16 val_buf;
+
+	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
+		return regmap_read(iqs62x->map, iqs62x->dev_desc->interval,
+				   val);
+
+	ret = regmap_raw_read(iqs62x->map, IQS624_POS_DEG_OUT, &val_buf,
+			      sizeof(val_buf));
+	if (ret)
+		return ret;
+
+	*val = le16_to_cpu(val_buf);
+
+	return 0;
+}
+
+static int iqs624_pos_read_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int *val, int *val2, long mask)
+{
+	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
+	struct iqs62x_core *iqs62x = iqs624_pos->iqs62x;
+	unsigned int scale = 1;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iqs624_pos_angle_get(iqs62x, val);
+		if (ret)
+			return ret;
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM) {
+			ret = regmap_read(iqs62x->map, IQS624_INTERVAL_DIV,
+					  &scale);
+			if (ret)
+				return ret;
+		}
+
+		*val = scale * IQS624_POS_SCALE1;
+		*val2 = IQS624_POS_SCALE2;
+		return IIO_VAL_FRACTIONAL;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int iqs624_pos_read_event_config(struct iio_dev *indio_dev,
+					const struct iio_chan_spec *chan,
+					enum iio_event_type type,
+					enum iio_event_direction dir)
+{
+	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&iqs624_pos->lock);
+	ret = iqs624_pos->angle_en;
+	mutex_unlock(&iqs624_pos->lock);
+
+	return ret;
+}
+
+static int iqs624_pos_write_event_config(struct iio_dev *indio_dev,
+					 const struct iio_chan_spec *chan,
+					 enum iio_event_type type,
+					 enum iio_event_direction dir,
+					 int state)
+{
+	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
+	struct iqs62x_core *iqs62x = iqs624_pos->iqs62x;
+	unsigned int val;
+	int ret;
+
+	mutex_lock(&iqs624_pos->lock);
+
+	ret = iqs624_pos_angle_get(iqs62x, &val);
+	if (ret)
+		goto err_mutex;
+
+	ret = iqs624_pos_angle_en(iqs62x, state);
+	if (ret)
+		goto err_mutex;
+
+	iqs624_pos->angle = val;
+	iqs624_pos->angle_en = state;
+
+err_mutex:
+	mutex_unlock(&iqs624_pos->lock);
+
+	return ret;
+}
+
+static const struct iio_info iqs624_pos_info = {
+	.read_raw = &iqs624_pos_read_raw,
+	.read_event_config = iqs624_pos_read_event_config,
+	.write_event_config = iqs624_pos_write_event_config,
+};
+
+static const struct iio_event_spec iqs624_pos_events[] = {
+	{
+		.type = IIO_EV_TYPE_CHANGE,
+		.dir = IIO_EV_DIR_NONE,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec iqs624_pos_channels[] = {
+	{
+		.type = IIO_ANGL,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.event_spec = iqs624_pos_events,
+		.num_event_specs = ARRAY_SIZE(iqs624_pos_events),
+	},
+};
+
+static int iqs624_pos_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iqs624_pos_private *iqs624_pos;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*iqs624_pos));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	iqs624_pos = iio_priv(indio_dev);
+	iqs624_pos->iqs62x = iqs62x;
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->channels = iqs624_pos_channels;
+	indio_dev->num_channels = ARRAY_SIZE(iqs624_pos_channels);
+	indio_dev->name = iqs62x->dev_desc->dev_name;
+	indio_dev->info = &iqs624_pos_info;
+
+	mutex_init(&iqs624_pos->lock);
+
+	iqs624_pos->notifier.notifier_call = iqs624_pos_notifier;
+	ret = blocking_notifier_chain_register(&iqs624_pos->iqs62x->nh,
+					       &iqs624_pos->notifier);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       iqs624_pos_notifier_unregister,
+				       iqs624_pos);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static struct platform_driver iqs624_pos_platform_driver = {
+	.driver = {
+		.name = IQS624_DRV_NAME_POS,
+	},
+	.probe = iqs624_pos_probe,
+};
+module_platform_driver(iqs624_pos_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS624/625 Angular Position Sensors");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" IQS624_DRV_NAME_POS);
--
2.7.4


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  2020-01-06  0:48 ` [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator Jeff LaBundy
@ 2020-01-14  8:08   ` Uwe Kleine-König
  2020-01-15  3:29     ` Jeff LaBundy
  0 siblings, 1 reply; 12+ messages in thread
From: Uwe Kleine-König @ 2020-01-14  8:08 UTC (permalink / raw)
  To: Jeff LaBundy
  Cc: lee.jones, dmitry.torokhov, thierry.reding, jic23, devicetree,
	linux-input, linux-pwm, knaack.h, lars, pmeerw, linux-iio,
	robh+dt, mark.rutland

Hello Jeff,

On Mon, Jan 06, 2020 at 12:48:02AM +0000, Jeff LaBundy wrote:
> This patch adds support for the Azoteq IQS620A, capable of generating
> a 1-kHz PWM output with duty cycle between ~0.4% and 100% (inclusive).

Overall a very nice driver, some minor issues below.

> Signed-off-by: Jeff LaBundy <jeff@labundy.com>
> ---
> Changes in v3:
>   - Updated the commit message to say "~0.4%" instead of "0.4%"
>   - Clarified the effect of duty cycle and state changes in the 'Limitations'
>     section and added a restriction regarding 0% duty cycle
>   - Added a comment in iqs620_pwm_apply to explain how duty cycle is derived
>   - Updated iqs620_pwm_apply to disable the output first and enable it last to
>     prevent temporarily driving a stale duty cycle
>   - Rounded the calculation for duty cycle up and down in iqs620_pwm_get_state
>     and iqs620_pwm_apply, respectively
>   - Added a comment in iqs620_pwm_get_state to explain what it reports follow-
>     ing requests to set duty cycle to 0%
>   - Added a lock to prevent back-to-back access of IQS620_PWR_SETTINGS_PWM_OUT
>     and IQS620_PWM_DUTY_CYCLE from being interrupted
>   - Updated iqs620_pwm_notifier to reference pwm->state directly as opposed to
>     calling pwm_get_state
>   - Moved notifier unregistration back to a device-managed action
>   - Added a completion to prevent iqs620_pwm_notifier from referencing the
>     pwm_chip structure until it has been initialized by pwmchip_add
> 
> Changes in v2:
>   - Merged 'Copyright' and 'Author' lines into one in introductory comments
>   - Added 'Limitations' section to introductory comments
>   - Replaced 'error' with 'ret' throughout
>   - Added const qualifier to state argument of iqs620_pwm_apply and removed all
>     modifications to the variable's contents
>   - Updated iqs620_pwm_apply to return -ENOTSUPP or -EINVAL if the requested
>     polarity is inverted or the requested period is below 1 ms, respectively
>   - Updated iqs620_pwm_apply to disable the PWM output if duty cycle is zero
>   - Added iqs620_pwm_get_state
>   - Eliminated tabbed alignment of pwm_ops and platform_driver struct members
>   - Moved notifier unregistration to already present iqs620_pwm_remove, which
>     eliminated the need for a device-managed action and ready flag
>   - Added a comment in iqs620_pwm_probe to explain the order of operations
>   - Changed Kconfig "depends on" logic to MFD_IQS62X || COMPILE_TEST
> 
>  drivers/pwm/Kconfig       |  10 ++
>  drivers/pwm/Makefile      |   1 +
>  drivers/pwm/pwm-iqs620a.c | 254 ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 265 insertions(+)
>  create mode 100644 drivers/pwm/pwm-iqs620a.c
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index bd21655..60bcf6c 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -222,6 +222,16 @@ config PWM_IMX_TPM
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called pwm-imx-tpm.
> 
> +config PWM_IQS620A
> +	tristate "Azoteq IQS620A PWM support"
> +	depends on MFD_IQS62X || COMPILE_TEST
> +	help
> +	  Generic PWM framework driver for the Azoteq IQS620A multi-function
> +	  sensor.
> +
> +	  To compile this driver as a module, choose M here: the module will
> +	  be called pwm-iqs620a.
> +
>  config PWM_JZ4740
>  	tristate "Ingenic JZ47xx PWM support"
>  	depends on MACH_INGENIC
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index 9a47507..a59c710 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_PWM_IMG)		+= pwm-img.o
>  obj-$(CONFIG_PWM_IMX1)		+= pwm-imx1.o
>  obj-$(CONFIG_PWM_IMX27)		+= pwm-imx27.o
>  obj-$(CONFIG_PWM_IMX_TPM)	+= pwm-imx-tpm.o
> +obj-$(CONFIG_PWM_IQS620A)	+= pwm-iqs620a.o
>  obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
>  obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
>  obj-$(CONFIG_PWM_LPC18XX_SCT)	+= pwm-lpc18xx-sct.o
> diff --git a/drivers/pwm/pwm-iqs620a.c b/drivers/pwm/pwm-iqs620a.c
> new file mode 100644
> index 0000000..ee5d8b5
> --- /dev/null
> +++ b/drivers/pwm/pwm-iqs620a.c
> @@ -0,0 +1,254 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Azoteq IQS620A PWM Generator
> + *
> + * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
> + *
> + * Limitations:
> + * - The period is fixed to 1 ms and is generated continuously despite changes
> + *   to the duty cycle or enable/disable state.
> + * - Changes to the duty cycle or enable/disable state take effect immediately
> + *   and may result in a glitch during the period in which the change is made.
> + * - The device cannot generate a 0% duty cycle. For duty cycles below 1 / 256
> + *   ms, the output is disabled and relies upon an external pull-down resistor
> + *   to hold the GPIO3/LTX pin low.
> + */
> +
> +#include <linux/completion.h>
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/iqs62x.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/notifier.h>
> +#include <linux/platform_device.h>
> +#include <linux/pwm.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#define IQS620_PWR_SETTINGS			0xD2
> +#define IQS620_PWR_SETTINGS_PWM_OUT		BIT(7)
> +
> +#define IQS620_PWM_DUTY_CYCLE			0xD8
> +
> +#define IQS620_PWM_PERIOD_NS			1000000
> +
> +struct iqs620_pwm_private {
> +	struct iqs62x_core *iqs62x;
> +	struct pwm_chip chip;
> +	struct notifier_block notifier;
> +	struct completion chip_ready;
> +	struct mutex lock;
> +};
> +
> +static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> +			    const struct pwm_state *state)
> +{
> +	struct iqs620_pwm_private *iqs620_pwm;
> +	struct iqs62x_core *iqs62x;
> +	int duty_scale, ret;
> +
> +	if (state->polarity != PWM_POLARITY_NORMAL)
> +		return -ENOTSUPP;
> +
> +	if (state->period < IQS620_PWM_PERIOD_NS)
> +		return -EINVAL;
> +
> +	iqs620_pwm = container_of(chip, struct iqs620_pwm_private, chip);
> +	iqs62x = iqs620_pwm->iqs62x;
> +
> +	mutex_lock(&iqs620_pwm->lock);
> +
> +	/*
> +	 * The duty cycle generated by the device is calculated as follows:
> +	 *
> +	 * duty_cycle = (IQS620_PWM_DUTY_CYCLE + 1) / 256 * 1 ms
> +	 *
> +	 * ...where IQS620_PWM_DUTY_CYCLE is a register value between 0 and 255
> +	 * (inclusive). Therefore the lowest duty cycle the device can generate
> +	 * while the output is enabled is 1 / 256 ms.
> +	 *
> +	 * For lower duty cycles (e.g. 0), the PWM output is simply disabled to
> +	 * allow an on-board pull-down resistor to hold the GPIO3/LTX pin low.
> +	 */
> +	duty_scale = state->duty_cycle * 256 / IQS620_PWM_PERIOD_NS;

minor optimisation: You could do the division before grabbing the lock.
(But unsure if this actually gives a better result or the compiler is
clever enough to do this.)

> +
> +	if (!state->enabled || !duty_scale) {
> +		ret = regmap_update_bits(iqs62x->map, IQS620_PWR_SETTINGS,
> +					 IQS620_PWR_SETTINGS_PWM_OUT, 0);
> +		if (ret)
> +			goto err_mutex;
> +	}
> +
> +	if (duty_scale) {
> +		ret = regmap_write(iqs62x->map, IQS620_PWM_DUTY_CYCLE,
> +				   min(duty_scale - 1, 0xFF));
> +		if (ret)
> +			goto err_mutex;
> +	}
> +
> +	if (state->enabled && duty_scale)
> +		ret = regmap_update_bits(iqs62x->map, IQS620_PWR_SETTINGS,
> +					 IQS620_PWR_SETTINGS_PWM_OUT, 0xFF);
> +
> +err_mutex:
> +	mutex_unlock(&iqs620_pwm->lock);
> +
> +	return ret;
> +}
> +
> +static void iqs620_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
> +				 struct pwm_state *state)
> +{
> +	struct iqs620_pwm_private *iqs620_pwm;
> +	struct iqs62x_core *iqs62x;
> +	unsigned int val;
> +	int ret;
> +
> +	iqs620_pwm = container_of(chip, struct iqs620_pwm_private, chip);
> +	iqs62x = iqs620_pwm->iqs62x;
> +
> +	mutex_lock(&iqs620_pwm->lock);
> +
> +	/*
> +	 * Since the device cannot generate a 0% duty cycle, requests to do so
> +	 * cause subsequent calls to iqs620_pwm_get_state to report the output
> +	 * as disabled with duty cycle equal to that which was in use prior to
> +	 * the request. This is not ideal, but is the best compromise based on
> +	 * the capabilities of the device.
> +	 */
> +	ret = regmap_read(iqs62x->map, IQS620_PWR_SETTINGS, &val);
> +	if (ret)
> +		goto err_mutex;
> +	state->enabled = val & IQS620_PWR_SETTINGS_PWM_OUT;
> +
> +	ret = regmap_read(iqs62x->map, IQS620_PWM_DUTY_CYCLE, &val);
> +	if (ret)
> +		goto err_mutex;
> +	state->duty_cycle = DIV_ROUND_UP((val + 1) * IQS620_PWM_PERIOD_NS, 256);
> +	state->period = IQS620_PWM_PERIOD_NS;
> +
> +err_mutex:
> +	mutex_unlock(&iqs620_pwm->lock);
> +
> +	if (ret)
> +		dev_err(iqs620_pwm->chip.dev, "Failed to get state: %d\n", ret);
> +}
> +

I thought we dicussed having a comment here, saying something like:

	The device might reset when [...] and as a result looses it's
	configuration. So the registers must be rewritten when this
	happens to restore the expected operation.

Is it worth to issue a warning when this happens?

> +static int iqs620_pwm_notifier(struct notifier_block *notifier,
> +			       unsigned long event_flags, void *context)
> +{
> +	struct iqs620_pwm_private *iqs620_pwm;
> +	int ret;
> +
> +	iqs620_pwm = container_of(notifier, struct iqs620_pwm_private,
> +				  notifier);
> +
> +	if (!completion_done(&iqs620_pwm->chip_ready) ||
> +	    !(event_flags & BIT(IQS62X_EVENT_SYS_RESET)))
> +		return NOTIFY_DONE;

Is here a (relevant?) race?  Consider the notifier triggers just when
pwmchip_add returned, (maybe even a consumer configured the device) and
before complete_all() is called. With my limited knowledge about
notifiers I'd say waiting for the completion here might be reasonable
and safe.

> +	ret = iqs620_pwm_apply(&iqs620_pwm->chip, &iqs620_pwm->chip.pwms[0],
> +			       &iqs620_pwm->chip.pwms[0].state);
> +	if (ret) {
> +		dev_err(iqs620_pwm->chip.dev,
> +			"Failed to re-initialize device: %d\n", ret);
> +		return NOTIFY_BAD;
> +	}
> +
> +	return NOTIFY_OK;
> +}
> +
> +static const struct pwm_ops iqs620_pwm_ops = {
> +	.apply = iqs620_pwm_apply,
> +	.get_state = iqs620_pwm_get_state,
> +	.owner = THIS_MODULE,
> +};
> +
> +static void iqs620_pwm_notifier_unregister(void *context)
> +{
> +	struct iqs620_pwm_private *iqs620_pwm = context;
> +	int ret;
> +
> +	ret = blocking_notifier_chain_unregister(&iqs620_pwm->iqs62x->nh,
> +						 &iqs620_pwm->notifier);
> +	if (ret)
> +		dev_err(iqs620_pwm->chip.dev,
> +			"Failed to unregister notifier: %d\n", ret);

	dev_err(iqs620_pwm->chip.dev,
		"Failed to unregister notifier: %pe\n", ERR_PTR(ret));

gives a nicer output. (Also applies to other error messages of course.)

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  2020-01-14  8:08   ` Uwe Kleine-König
@ 2020-01-15  3:29     ` Jeff LaBundy
  2020-01-15  7:33       ` Uwe Kleine-König
  0 siblings, 1 reply; 12+ messages in thread
From: Jeff LaBundy @ 2020-01-15  3:29 UTC (permalink / raw)
  To: Uwe Kleine-König
  Cc: lee.jones, dmitry.torokhov, thierry.reding, jic23, devicetree,
	linux-input, linux-pwm, knaack.h, lars, pmeerw, linux-iio,
	robh+dt, mark.rutland

Hi Uwe,

Thank you for your kind words and thorough review.

On Tue, Jan 14, 2020 at 09:08:28AM +0100, Uwe Kleine-König wrote:
> Hello Jeff,
> 
> On Mon, Jan 06, 2020 at 12:48:02AM +0000, Jeff LaBundy wrote:
> > This patch adds support for the Azoteq IQS620A, capable of generating
> > a 1-kHz PWM output with duty cycle between ~0.4% and 100% (inclusive).
> 
> Overall a very nice driver, some minor issues below.
> 
> > Signed-off-by: Jeff LaBundy <jeff@labundy.com>
> > ---
> > Changes in v3:
> >   - Updated the commit message to say "~0.4%" instead of "0.4%"
> >   - Clarified the effect of duty cycle and state changes in the 'Limitations'
> >     section and added a restriction regarding 0% duty cycle
> >   - Added a comment in iqs620_pwm_apply to explain how duty cycle is derived
> >   - Updated iqs620_pwm_apply to disable the output first and enable it last to
> >     prevent temporarily driving a stale duty cycle
> >   - Rounded the calculation for duty cycle up and down in iqs620_pwm_get_state
> >     and iqs620_pwm_apply, respectively
> >   - Added a comment in iqs620_pwm_get_state to explain what it reports follow-
> >     ing requests to set duty cycle to 0%
> >   - Added a lock to prevent back-to-back access of IQS620_PWR_SETTINGS_PWM_OUT
> >     and IQS620_PWM_DUTY_CYCLE from being interrupted
> >   - Updated iqs620_pwm_notifier to reference pwm->state directly as opposed to
> >     calling pwm_get_state
> >   - Moved notifier unregistration back to a device-managed action
> >   - Added a completion to prevent iqs620_pwm_notifier from referencing the
> >     pwm_chip structure until it has been initialized by pwmchip_add
> > 
> > Changes in v2:
> >   - Merged 'Copyright' and 'Author' lines into one in introductory comments
> >   - Added 'Limitations' section to introductory comments
> >   - Replaced 'error' with 'ret' throughout
> >   - Added const qualifier to state argument of iqs620_pwm_apply and removed all
> >     modifications to the variable's contents
> >   - Updated iqs620_pwm_apply to return -ENOTSUPP or -EINVAL if the requested
> >     polarity is inverted or the requested period is below 1 ms, respectively
> >   - Updated iqs620_pwm_apply to disable the PWM output if duty cycle is zero
> >   - Added iqs620_pwm_get_state
> >   - Eliminated tabbed alignment of pwm_ops and platform_driver struct members
> >   - Moved notifier unregistration to already present iqs620_pwm_remove, which
> >     eliminated the need for a device-managed action and ready flag
> >   - Added a comment in iqs620_pwm_probe to explain the order of operations
> >   - Changed Kconfig "depends on" logic to MFD_IQS62X || COMPILE_TEST
> > 
> >  drivers/pwm/Kconfig       |  10 ++
> >  drivers/pwm/Makefile      |   1 +
> >  drivers/pwm/pwm-iqs620a.c | 254 ++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 265 insertions(+)
> >  create mode 100644 drivers/pwm/pwm-iqs620a.c
> > 
> > diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> > index bd21655..60bcf6c 100644
> > --- a/drivers/pwm/Kconfig
> > +++ b/drivers/pwm/Kconfig
> > @@ -222,6 +222,16 @@ config PWM_IMX_TPM
> >  	  To compile this driver as a module, choose M here: the module
> >  	  will be called pwm-imx-tpm.
> > 
> > +config PWM_IQS620A
> > +	tristate "Azoteq IQS620A PWM support"
> > +	depends on MFD_IQS62X || COMPILE_TEST
> > +	help
> > +	  Generic PWM framework driver for the Azoteq IQS620A multi-function
> > +	  sensor.
> > +
> > +	  To compile this driver as a module, choose M here: the module will
> > +	  be called pwm-iqs620a.
> > +
> >  config PWM_JZ4740
> >  	tristate "Ingenic JZ47xx PWM support"
> >  	depends on MACH_INGENIC
> > diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> > index 9a47507..a59c710 100644
> > --- a/drivers/pwm/Makefile
> > +++ b/drivers/pwm/Makefile
> > @@ -20,6 +20,7 @@ obj-$(CONFIG_PWM_IMG)		+= pwm-img.o
> >  obj-$(CONFIG_PWM_IMX1)		+= pwm-imx1.o
> >  obj-$(CONFIG_PWM_IMX27)		+= pwm-imx27.o
> >  obj-$(CONFIG_PWM_IMX_TPM)	+= pwm-imx-tpm.o
> > +obj-$(CONFIG_PWM_IQS620A)	+= pwm-iqs620a.o
> >  obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
> >  obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
> >  obj-$(CONFIG_PWM_LPC18XX_SCT)	+= pwm-lpc18xx-sct.o
> > diff --git a/drivers/pwm/pwm-iqs620a.c b/drivers/pwm/pwm-iqs620a.c
> > new file mode 100644
> > index 0000000..ee5d8b5
> > --- /dev/null
> > +++ b/drivers/pwm/pwm-iqs620a.c
> > @@ -0,0 +1,254 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Azoteq IQS620A PWM Generator
> > + *
> > + * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
> > + *
> > + * Limitations:
> > + * - The period is fixed to 1 ms and is generated continuously despite changes
> > + *   to the duty cycle or enable/disable state.
> > + * - Changes to the duty cycle or enable/disable state take effect immediately
> > + *   and may result in a glitch during the period in which the change is made.
> > + * - The device cannot generate a 0% duty cycle. For duty cycles below 1 / 256
> > + *   ms, the output is disabled and relies upon an external pull-down resistor
> > + *   to hold the GPIO3/LTX pin low.
> > + */
> > +
> > +#include <linux/completion.h>
> > +#include <linux/device.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/iqs62x.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/notifier.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pwm.h>
> > +#include <linux/regmap.h>
> > +#include <linux/slab.h>
> > +
> > +#define IQS620_PWR_SETTINGS			0xD2
> > +#define IQS620_PWR_SETTINGS_PWM_OUT		BIT(7)
> > +
> > +#define IQS620_PWM_DUTY_CYCLE			0xD8
> > +
> > +#define IQS620_PWM_PERIOD_NS			1000000
> > +
> > +struct iqs620_pwm_private {
> > +	struct iqs62x_core *iqs62x;
> > +	struct pwm_chip chip;
> > +	struct notifier_block notifier;
> > +	struct completion chip_ready;
> > +	struct mutex lock;
> > +};
> > +
> > +static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> > +			    const struct pwm_state *state)
> > +{
> > +	struct iqs620_pwm_private *iqs620_pwm;
> > +	struct iqs62x_core *iqs62x;
> > +	int duty_scale, ret;
> > +
> > +	if (state->polarity != PWM_POLARITY_NORMAL)
> > +		return -ENOTSUPP;
> > +
> > +	if (state->period < IQS620_PWM_PERIOD_NS)
> > +		return -EINVAL;
> > +
> > +	iqs620_pwm = container_of(chip, struct iqs620_pwm_private, chip);
> > +	iqs62x = iqs620_pwm->iqs62x;
> > +
> > +	mutex_lock(&iqs620_pwm->lock);
> > +
> > +	/*
> > +	 * The duty cycle generated by the device is calculated as follows:
> > +	 *
> > +	 * duty_cycle = (IQS620_PWM_DUTY_CYCLE + 1) / 256 * 1 ms
> > +	 *
> > +	 * ...where IQS620_PWM_DUTY_CYCLE is a register value between 0 and 255
> > +	 * (inclusive). Therefore the lowest duty cycle the device can generate
> > +	 * while the output is enabled is 1 / 256 ms.
> > +	 *
> > +	 * For lower duty cycles (e.g. 0), the PWM output is simply disabled to
> > +	 * allow an on-board pull-down resistor to hold the GPIO3/LTX pin low.
> > +	 */
> > +	duty_scale = state->duty_cycle * 256 / IQS620_PWM_PERIOD_NS;
> 
> minor optimisation: You could do the division before grabbing the lock.
> (But unsure if this actually gives a better result or the compiler is
> clever enough to do this.)
> 

That's a great point. Regardless of the result I think it is better to re-order
as you suggest, simply to keep with the idea of locking around only the minimum
necessary code.

> > +
> > +	if (!state->enabled || !duty_scale) {
> > +		ret = regmap_update_bits(iqs62x->map, IQS620_PWR_SETTINGS,
> > +					 IQS620_PWR_SETTINGS_PWM_OUT, 0);
> > +		if (ret)
> > +			goto err_mutex;
> > +	}
> > +
> > +	if (duty_scale) {
> > +		ret = regmap_write(iqs62x->map, IQS620_PWM_DUTY_CYCLE,
> > +				   min(duty_scale - 1, 0xFF));
> > +		if (ret)
> > +			goto err_mutex;
> > +	}
> > +
> > +	if (state->enabled && duty_scale)
> > +		ret = regmap_update_bits(iqs62x->map, IQS620_PWR_SETTINGS,
> > +					 IQS620_PWR_SETTINGS_PWM_OUT, 0xFF);
> > +
> > +err_mutex:
> > +	mutex_unlock(&iqs620_pwm->lock);
> > +
> > +	return ret;
> > +}
> > +
> > +static void iqs620_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
> > +				 struct pwm_state *state)
> > +{
> > +	struct iqs620_pwm_private *iqs620_pwm;
> > +	struct iqs62x_core *iqs62x;
> > +	unsigned int val;
> > +	int ret;
> > +
> > +	iqs620_pwm = container_of(chip, struct iqs620_pwm_private, chip);
> > +	iqs62x = iqs620_pwm->iqs62x;
> > +
> > +	mutex_lock(&iqs620_pwm->lock);
> > +
> > +	/*
> > +	 * Since the device cannot generate a 0% duty cycle, requests to do so
> > +	 * cause subsequent calls to iqs620_pwm_get_state to report the output
> > +	 * as disabled with duty cycle equal to that which was in use prior to
> > +	 * the request. This is not ideal, but is the best compromise based on
> > +	 * the capabilities of the device.
> > +	 */
> > +	ret = regmap_read(iqs62x->map, IQS620_PWR_SETTINGS, &val);
> > +	if (ret)
> > +		goto err_mutex;
> > +	state->enabled = val & IQS620_PWR_SETTINGS_PWM_OUT;
> > +
> > +	ret = regmap_read(iqs62x->map, IQS620_PWM_DUTY_CYCLE, &val);
> > +	if (ret)
> > +		goto err_mutex;
> > +	state->duty_cycle = DIV_ROUND_UP((val + 1) * IQS620_PWM_PERIOD_NS, 256);
> > +	state->period = IQS620_PWM_PERIOD_NS;
> > +
> > +err_mutex:
> > +	mutex_unlock(&iqs620_pwm->lock);
> > +
> > +	if (ret)
> > +		dev_err(iqs620_pwm->chip.dev, "Failed to get state: %d\n", ret);
> > +}
> > +
> 
> I thought we dicussed having a comment here, saying something like:
> 
> 	The device might reset when [...] and as a result looses it's
> 	configuration. So the registers must be rewritten when this
> 	happens to restore the expected operation.
> 
> Is it worth to issue a warning when this happens?
> 

The detailed comments and an error message have always been in iqs62x_irq of the
parent MFD driver. The pwm is only one of up to three sub-devices that subscribe
to the chain and must update their locally owned registers after the MFD handles
the interrupt and restores the device's firmware. I opted to keep these comments
in the common MFD rather than repeating throughout the series.

> > +static int iqs620_pwm_notifier(struct notifier_block *notifier,
> > +			       unsigned long event_flags, void *context)
> > +{
> > +	struct iqs620_pwm_private *iqs620_pwm;
> > +	int ret;
> > +
> > +	iqs620_pwm = container_of(notifier, struct iqs620_pwm_private,
> > +				  notifier);
> > +
> > +	if (!completion_done(&iqs620_pwm->chip_ready) ||
> > +	    !(event_flags & BIT(IQS62X_EVENT_SYS_RESET)))
> > +		return NOTIFY_DONE;
> 
> Is here a (relevant?) race?  Consider the notifier triggers just when
> pwmchip_add returned, (maybe even a consumer configured the device) and
> before complete_all() is called. With my limited knowledge about
> notifiers I'd say waiting for the completion here might be reasonable
> and safe.
> 

Great catch; this is theoretically possible. The problem with waiting, however,
is if the notifier is triggered right away during probe but probe returns early
due to an error (and completion never happens).

At this point, I think the best option is to simply cache the values written to
IQS620_PWR_SETTINGS_PWM_OUT and IQS620_PWM_DUTY_CYCLE and restore them from the
notifier, which is essentially what is done for the IIO drivers in this series.

This simple solution avoids messy tear-down paths and race conditions resulting
from trying to piggy-back chip->pwms[0] before it may be available. As an added
bonus it also alleviates any register access from get_state, which could simply
use the cached values to return the quantized duty cycle.

> > +	ret = iqs620_pwm_apply(&iqs620_pwm->chip, &iqs620_pwm->chip.pwms[0],
> > +			       &iqs620_pwm->chip.pwms[0].state);
> > +	if (ret) {
> > +		dev_err(iqs620_pwm->chip.dev,
> > +			"Failed to re-initialize device: %d\n", ret);
> > +		return NOTIFY_BAD;
> > +	}
> > +
> > +	return NOTIFY_OK;
> > +}
> > +
> > +static const struct pwm_ops iqs620_pwm_ops = {
> > +	.apply = iqs620_pwm_apply,
> > +	.get_state = iqs620_pwm_get_state,
> > +	.owner = THIS_MODULE,
> > +};
> > +
> > +static void iqs620_pwm_notifier_unregister(void *context)
> > +{
> > +	struct iqs620_pwm_private *iqs620_pwm = context;
> > +	int ret;
> > +
> > +	ret = blocking_notifier_chain_unregister(&iqs620_pwm->iqs62x->nh,
> > +						 &iqs620_pwm->notifier);
> > +	if (ret)
> > +		dev_err(iqs620_pwm->chip.dev,
> > +			"Failed to unregister notifier: %d\n", ret);
> 
> 	dev_err(iqs620_pwm->chip.dev,
> 		"Failed to unregister notifier: %pe\n", ERR_PTR(ret));
> 
> gives a nicer output. (Also applies to other error messages of course.)
> 

I don't disagree, but this gives me some pause. If I made this change here, I'd
prefer to do so across the series for consistency. However, I am hesitant to do
so at this stage in the review since several patches are somewhat stable by now
(unless there was a compelling reason from a functional perspective).

Another reason is that there are many dev_err cases throughout this series, and
adopting this very recently introduced functionality would make the series even
harder to back port to the present lot of LTS kernels.

Unless this is a deal breaker, I'd like to pass on this for v4. However, please
let me know if you feel strongly about it. In the meantime, I'll get started on
the couple of other changes discussed here.

> Best regards
> Uwe
> 
> -- 
> Pengutronix e.K.                           | Uwe Kleine-König            |
> Industrial Linux Solutions                 | https://www.pengutronix.de/ |

Kind regards,
Jeff LaBundy

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  2020-01-15  3:29     ` Jeff LaBundy
@ 2020-01-15  7:33       ` Uwe Kleine-König
  2020-01-16  3:34         ` Jeff LaBundy
  0 siblings, 1 reply; 12+ messages in thread
From: Uwe Kleine-König @ 2020-01-15  7:33 UTC (permalink / raw)
  To: Jeff LaBundy
  Cc: lee.jones, dmitry.torokhov, thierry.reding, jic23, devicetree,
	linux-input, linux-pwm, knaack.h, lars, pmeerw, linux-iio,
	robh+dt, mark.rutland

Hello Jeff,

On Wed, Jan 15, 2020 at 03:29:52AM +0000, Jeff LaBundy wrote:
> Thank you for your kind words and thorough review.

Great my feedback is welcome.

> On Tue, Jan 14, 2020 at 09:08:28AM +0100, Uwe Kleine-König wrote:
> > On Mon, Jan 06, 2020 at 12:48:02AM +0000, Jeff LaBundy wrote:
> > I thought we dicussed having a comment here, saying something like:
> > 
> > 	The device might reset when [...] and as a result looses it's
> > 	configuration. So the registers must be rewritten when this
> > 	happens to restore the expected operation.
> > 
> > Is it worth to issue a warning when this happens?
> 
> The detailed comments and an error message have always been in iqs62x_irq of the
> parent MFD driver. The pwm is only one of up to three sub-devices that subscribe
> to the chain and must update their locally owned registers after the MFD handles
> the interrupt and restores the device's firmware. I opted to keep these comments
> in the common MFD rather than repeating throughout the series.

That's fine then, a comment that the parent driver issues a message
would be great then.
 
> > > +static int iqs620_pwm_notifier(struct notifier_block *notifier,
> > > +			       unsigned long event_flags, void *context)
> > > +{
> > > +	struct iqs620_pwm_private *iqs620_pwm;
> > > +	int ret;
> > > +
> > > +	iqs620_pwm = container_of(notifier, struct iqs620_pwm_private,
> > > +				  notifier);
> > > +
> > > +	if (!completion_done(&iqs620_pwm->chip_ready) ||
> > > +	    !(event_flags & BIT(IQS62X_EVENT_SYS_RESET)))
> > > +		return NOTIFY_DONE;
> > 
> > Is here a (relevant?) race?  Consider the notifier triggers just when
> > pwmchip_add returned, (maybe even a consumer configured the device) and
> > before complete_all() is called. With my limited knowledge about
> > notifiers I'd say waiting for the completion here might be reasonable
> > and safe.
> 
> Great catch; this is theoretically possible. The problem with waiting, however,
> is if the notifier is triggered right away during probe but probe returns early
> due to an error (and completion never happens).

OK, the error path would need to complete .chip_ready then and the
notifier then check for this error. Indeed messy.
 
> At this point, I think the best option is to simply cache the values written to
> IQS620_PWR_SETTINGS_PWM_OUT and IQS620_PWM_DUTY_CYCLE and restore them from the
> notifier, which is essentially what is done for the IIO drivers in this series.

Sounds good.
 
> > > +	ret = blocking_notifier_chain_unregister(&iqs620_pwm->iqs62x->nh,
> > > +						 &iqs620_pwm->notifier);
> > > +	if (ret)
> > > +		dev_err(iqs620_pwm->chip.dev,
> > > +			"Failed to unregister notifier: %d\n", ret);
> > 
> > 	dev_err(iqs620_pwm->chip.dev,
> > 		"Failed to unregister notifier: %pe\n", ERR_PTR(ret));
> > 
> > gives a nicer output. (Also applies to other error messages of course.)
> > 
> 
> I don't disagree, but this gives me some pause. If I made this change here, I'd
> prefer to do so across the series for consistency. However, I am hesitant to do
> so at this stage in the review since several patches are somewhat stable by now
> (unless there was a compelling reason from a functional perspective).
> 
> Another reason is that there are many dev_err cases throughout this series, and
> adopting this very recently introduced functionality would make the series even
> harder to back port to the present lot of LTS kernels.
> 
> Unless this is a deal breaker, I'd like to pass on this for v4. However, please
> let me know if you feel strongly about it. In the meantime, I'll get started on
> the couple of other changes discussed here.

OK, being able to backport is a valid excuse. Consistency over the whole
series wouldn't be one of my reasons, your mileage obviously varies
(which is OK).

This can also be done later. Conversion to this is on my todo-list (not
at the top though), but if you beat me to it, I won't be angry :-)

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  2020-01-15  7:33       ` Uwe Kleine-König
@ 2020-01-16  3:34         ` Jeff LaBundy
  0 siblings, 0 replies; 12+ messages in thread
From: Jeff LaBundy @ 2020-01-16  3:34 UTC (permalink / raw)
  To: Uwe Kleine-König
  Cc: lee.jones, dmitry.torokhov, thierry.reding, jic23, devicetree,
	linux-input, linux-pwm, knaack.h, lars, pmeerw, linux-iio,
	robh+dt, mark.rutland

Hi Uwe,

On Wed, Jan 15, 2020 at 08:33:36AM +0100, Uwe Kleine-König wrote:
> Hello Jeff,
> 
> On Wed, Jan 15, 2020 at 03:29:52AM +0000, Jeff LaBundy wrote:
> > Thank you for your kind words and thorough review.
> 
> Great my feedback is welcome.
> 
> > On Tue, Jan 14, 2020 at 09:08:28AM +0100, Uwe Kleine-König wrote:
> > > On Mon, Jan 06, 2020 at 12:48:02AM +0000, Jeff LaBundy wrote:
> > > I thought we dicussed having a comment here, saying something like:
> > > 
> > > 	The device might reset when [...] and as a result looses it's
> > > 	configuration. So the registers must be rewritten when this
> > > 	happens to restore the expected operation.
> > > 
> > > Is it worth to issue a warning when this happens?
> > 
> > The detailed comments and an error message have always been in iqs62x_irq of the
> > parent MFD driver. The pwm is only one of up to three sub-devices that subscribe
> > to the chain and must update their locally owned registers after the MFD handles
> > the interrupt and restores the device's firmware. I opted to keep these comments
> > in the common MFD rather than repeating throughout the series.
> 
> That's fine then, a comment that the parent driver issues a message
> would be great then.

Sure thing, will do.

>  
> > > > +static int iqs620_pwm_notifier(struct notifier_block *notifier,
> > > > +			       unsigned long event_flags, void *context)
> > > > +{
> > > > +	struct iqs620_pwm_private *iqs620_pwm;
> > > > +	int ret;
> > > > +
> > > > +	iqs620_pwm = container_of(notifier, struct iqs620_pwm_private,
> > > > +				  notifier);
> > > > +
> > > > +	if (!completion_done(&iqs620_pwm->chip_ready) ||
> > > > +	    !(event_flags & BIT(IQS62X_EVENT_SYS_RESET)))
> > > > +		return NOTIFY_DONE;
> > > 
> > > Is here a (relevant?) race?  Consider the notifier triggers just when
> > > pwmchip_add returned, (maybe even a consumer configured the device) and
> > > before complete_all() is called. With my limited knowledge about
> > > notifiers I'd say waiting for the completion here might be reasonable
> > > and safe.
> > 
> > Great catch; this is theoretically possible. The problem with waiting, however,
> > is if the notifier is triggered right away during probe but probe returns early
> > due to an error (and completion never happens).
> 
> OK, the error path would need to complete .chip_ready then and the
> notifier then check for this error. Indeed messy.
>  
> > At this point, I think the best option is to simply cache the values written to
> > IQS620_PWR_SETTINGS_PWM_OUT and IQS620_PWM_DUTY_CYCLE and restore them from the
> > notifier, which is essentially what is done for the IIO drivers in this series.
> 
> Sounds good.
>  
> > > > +	ret = blocking_notifier_chain_unregister(&iqs620_pwm->iqs62x->nh,
> > > > +						 &iqs620_pwm->notifier);
> > > > +	if (ret)
> > > > +		dev_err(iqs620_pwm->chip.dev,
> > > > +			"Failed to unregister notifier: %d\n", ret);
> > > 
> > > 	dev_err(iqs620_pwm->chip.dev,
> > > 		"Failed to unregister notifier: %pe\n", ERR_PTR(ret));
> > > 
> > > gives a nicer output. (Also applies to other error messages of course.)
> > > 
> > 
> > I don't disagree, but this gives me some pause. If I made this change here, I'd
> > prefer to do so across the series for consistency. However, I am hesitant to do
> > so at this stage in the review since several patches are somewhat stable by now
> > (unless there was a compelling reason from a functional perspective).
> > 
> > Another reason is that there are many dev_err cases throughout this series, and
> > adopting this very recently introduced functionality would make the series even
> > harder to back port to the present lot of LTS kernels.
> > 
> > Unless this is a deal breaker, I'd like to pass on this for v4. However, please
> > let me know if you feel strongly about it. In the meantime, I'll get started on
> > the couple of other changes discussed here.
> 
> OK, being able to backport is a valid excuse. Consistency over the whole
> series wouldn't be one of my reasons, your mileage obviously varies
> (which is OK).
> 
> This can also be done later. Conversion to this is on my todo-list (not
> at the top though), but if you beat me to it, I won't be angry :-)
> 

Thank you for your understanding.

> Best regards
> Uwe
> 
> -- 
> Pengutronix e.K.                           | Uwe Kleine-König            |
> Industrial Linux Solutions                 | https://www.pengutronix.de/ |

I'll send out v4 in the next day or so after I finish some testing.

Kind regards,
Jeff LaBundy

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-06  0:47 [PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
2020-01-06  0:48 ` [PATCH v3 1/7] dt-bindings: Add bindings " Jeff LaBundy
2020-01-06  0:48 ` [PATCH v3 2/7] mfd: Add support " Jeff LaBundy
2020-01-06  0:48 ` [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator Jeff LaBundy
2020-01-14  8:08   ` Uwe Kleine-König
2020-01-15  3:29     ` Jeff LaBundy
2020-01-15  7:33       ` Uwe Kleine-König
2020-01-16  3:34         ` Jeff LaBundy
2020-01-06  0:48 ` [PATCH v3 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
2020-01-06  0:48 ` [PATCH v3 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor Jeff LaBundy
2020-01-06  0:48 ` [PATCH v3 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors Jeff LaBundy
2020-01-06  0:48 ` [PATCH v3 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors Jeff LaBundy

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git