* [PATCH v12 1/8] include: fpga: adi-axi-common.h: fixup whitespace tab -> space
2020-03-22 17:53 [PATCH v12 0/8] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC Alexandru Ardelean
@ 2020-03-22 17:53 ` Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 2/8] include: fpga: adi-axi-common.h: add version helper macros Alexandru Ardelean
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Alexandru Ardelean @ 2020-03-22 17:53 UTC (permalink / raw)
To: linux-iio, linux-kernel, devicetree
Cc: jic23, robh+dt, Laszlo.Nagy, Andrei.Grozav, Michael.Hennerich,
Istvan.Csomortani, Adrian.Costina, Dragos.Bogdan,
Alexandru Ardelean
The initial version use a tab between '#define' & 'ADI_AXI_REG_VERSION'.
This changes it to space. The change is purely cosmetic.
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
include/linux/fpga/adi-axi-common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/fpga/adi-axi-common.h b/include/linux/fpga/adi-axi-common.h
index 7fc95d5c95bb..ebd4e07ae3d8 100644
--- a/include/linux/fpga/adi-axi-common.h
+++ b/include/linux/fpga/adi-axi-common.h
@@ -11,7 +11,7 @@
#ifndef ADI_AXI_COMMON_H_
#define ADI_AXI_COMMON_H_
-#define ADI_AXI_REG_VERSION 0x0000
+#define ADI_AXI_REG_VERSION 0x0000
#define ADI_AXI_PCORE_VER(major, minor, patch) \
(((major) << 16) | ((minor) << 8) | (patch))
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v12 2/8] include: fpga: adi-axi-common.h: add version helper macros
2020-03-22 17:53 [PATCH v12 0/8] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 1/8] include: fpga: adi-axi-common.h: fixup whitespace tab -> space Alexandru Ardelean
@ 2020-03-22 17:53 ` Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 3/8] iio: buffer-dmaengine: use %zu specifier for sprintf(align) Alexandru Ardelean
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Alexandru Ardelean @ 2020-03-22 17:53 UTC (permalink / raw)
To: linux-iio, linux-kernel, devicetree
Cc: jic23, robh+dt, Laszlo.Nagy, Andrei.Grozav, Michael.Hennerich,
Istvan.Csomortani, Adrian.Costina, Dragos.Bogdan,
Alexandru Ardelean
The format for all ADI AXI IP cores is the same.
i.e. 'major.minor.patch'.
This patch adds the helper macros to be re-used in ADI AXI drivers.
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
include/linux/fpga/adi-axi-common.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/linux/fpga/adi-axi-common.h b/include/linux/fpga/adi-axi-common.h
index ebd4e07ae3d8..141ac3f251e6 100644
--- a/include/linux/fpga/adi-axi-common.h
+++ b/include/linux/fpga/adi-axi-common.h
@@ -16,4 +16,8 @@
#define ADI_AXI_PCORE_VER(major, minor, patch) \
(((major) << 16) | ((minor) << 8) | (patch))
+#define ADI_AXI_PCORE_VER_MAJOR(version) (((version) >> 16) & 0xff)
+#define ADI_AXI_PCORE_VER_MINOR(version) (((version) >> 8) & 0xff)
+#define ADI_AXI_PCORE_VER_PATCH(version) ((version) & 0xff)
+
#endif /* ADI_AXI_COMMON_H_ */
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v12 3/8] iio: buffer-dmaengine: use %zu specifier for sprintf(align)
2020-03-22 17:53 [PATCH v12 0/8] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 1/8] include: fpga: adi-axi-common.h: fixup whitespace tab -> space Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 2/8] include: fpga: adi-axi-common.h: add version helper macros Alexandru Ardelean
@ 2020-03-22 17:53 ` Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 4/8] iio: buffer-dmaengine: add dev-managed calls for buffer alloc Alexandru Ardelean
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Alexandru Ardelean @ 2020-03-22 17:53 UTC (permalink / raw)
To: linux-iio, linux-kernel, devicetree
Cc: jic23, robh+dt, Laszlo.Nagy, Andrei.Grozav, Michael.Hennerich,
Istvan.Csomortani, Adrian.Costina, Dragos.Bogdan,
Alexandru Ardelean
The 'size_t' type behaves differently on 64-bit architectures, and causes
compiler a warning of the sort "format '%u' expects argument of type
'unsigned int', but argument 3 has type 'size_t {aka long unsigned int}'".
This change adds the correct specifier for the 'align' field.
Fixes: 4538c18568099 ("iio: buffer-dmaengine: Report buffer length requirements")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/iio/buffer/industrialio-buffer-dmaengine.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
index b129693af0fd..94da3b1ca3a2 100644
--- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c
+++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
@@ -134,7 +134,7 @@ static ssize_t iio_dmaengine_buffer_get_length_align(struct device *dev,
struct dmaengine_buffer *dmaengine_buffer =
iio_buffer_to_dmaengine_buffer(indio_dev->buffer);
- return sprintf(buf, "%u\n", dmaengine_buffer->align);
+ return sprintf(buf, "%zu\n", dmaengine_buffer->align);
}
static IIO_DEVICE_ATTR(length_align_bytes, 0444,
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v12 4/8] iio: buffer-dmaengine: add dev-managed calls for buffer alloc
2020-03-22 17:53 [PATCH v12 0/8] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC Alexandru Ardelean
` (2 preceding siblings ...)
2020-03-22 17:53 ` [PATCH v12 3/8] iio: buffer-dmaengine: use %zu specifier for sprintf(align) Alexandru Ardelean
@ 2020-03-22 17:53 ` Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 5/8] iio: adc: adi-axi-adc: add support for AXI ADC IP core Alexandru Ardelean
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Alexandru Ardelean @ 2020-03-22 17:53 UTC (permalink / raw)
To: linux-iio, linux-kernel, devicetree
Cc: jic23, robh+dt, Laszlo.Nagy, Andrei.Grozav, Michael.Hennerich,
Istvan.Csomortani, Adrian.Costina, Dragos.Bogdan,
Alexandru Ardelean
Currently, when using a 'iio_dmaengine_buffer_alloc()', an matching call to
'iio_dmaengine_buffer_free()' must be made.
With this change, this can be avoided by using
'devm_iio_dmaengine_buffer_alloc()'. The buffer will get free'd via the
device's devres handling.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
.../buffer/industrialio-buffer-dmaengine.c | 39 +++++++++++++++++++
include/linux/iio/buffer-dmaengine.h | 3 ++
2 files changed, 42 insertions(+)
diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
index 94da3b1ca3a2..6dedf12b69a4 100644
--- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c
+++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
@@ -229,6 +229,45 @@ void iio_dmaengine_buffer_free(struct iio_buffer *buffer)
}
EXPORT_SYMBOL_GPL(iio_dmaengine_buffer_free);
+static void __devm_iio_dmaengine_buffer_free(struct device *dev, void *res)
+{
+ iio_dmaengine_buffer_free(*(struct iio_buffer **)res);
+}
+
+/**
+ * devm_iio_dmaengine_buffer_alloc() - Resource-managed iio_dmaengine_buffer_alloc()
+ * @dev: Parent device for the buffer
+ * @channel: DMA channel name, typically "rx".
+ *
+ * This allocates a new IIO buffer which internally uses the DMAengine framework
+ * to perform its transfers. The parent device will be used to request the DMA
+ * channel.
+ *
+ * The buffer will be automatically de-allocated once the device gets destroyed.
+ */
+struct iio_buffer *devm_iio_dmaengine_buffer_alloc(struct device *dev,
+ const char *channel)
+{
+ struct iio_buffer **bufferp, *buffer;
+
+ bufferp = devres_alloc(__devm_iio_dmaengine_buffer_free,
+ sizeof(*bufferp), GFP_KERNEL);
+ if (!bufferp)
+ return ERR_PTR(-ENOMEM);
+
+ buffer = iio_dmaengine_buffer_alloc(dev, channel);
+ if (IS_ERR(buffer)) {
+ devres_free(bufferp);
+ return buffer;
+ }
+
+ *bufferp = buffer;
+ devres_add(dev, bufferp);
+
+ return buffer;
+}
+EXPORT_SYMBOL_GPL(devm_iio_dmaengine_buffer_alloc);
+
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("DMA buffer for the IIO framework");
MODULE_LICENSE("GPL");
diff --git a/include/linux/iio/buffer-dmaengine.h b/include/linux/iio/buffer-dmaengine.h
index b3a57444a886..0e503db71289 100644
--- a/include/linux/iio/buffer-dmaengine.h
+++ b/include/linux/iio/buffer-dmaengine.h
@@ -14,4 +14,7 @@ struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev,
const char *channel);
void iio_dmaengine_buffer_free(struct iio_buffer *buffer);
+struct iio_buffer *devm_iio_dmaengine_buffer_alloc(struct device *dev,
+ const char *channel);
+
#endif
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v12 5/8] iio: adc: adi-axi-adc: add support for AXI ADC IP core
2020-03-22 17:53 [PATCH v12 0/8] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC Alexandru Ardelean
` (3 preceding siblings ...)
2020-03-22 17:53 ` [PATCH v12 4/8] iio: buffer-dmaengine: add dev-managed calls for buffer alloc Alexandru Ardelean
@ 2020-03-22 17:53 ` Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 6/8] dt-bindings: iio: adc: add bindings doc for AXI ADC driver Alexandru Ardelean
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Alexandru Ardelean @ 2020-03-22 17:53 UTC (permalink / raw)
To: linux-iio, linux-kernel, devicetree
Cc: jic23, robh+dt, Laszlo.Nagy, Andrei.Grozav, Michael.Hennerich,
Istvan.Csomortani, Adrian.Costina, Dragos.Bogdan,
Michael Hennerich, Lars-Peter Clausen, Alexandru Ardelean
From: Michael Hennerich <michael.hennerich@analog.com>
This change adds support for the Analog Devices Generic AXI ADC IP core.
The IP core is used for interfacing with analog-to-digital (ADC) converters
that require either a high-speed serial interface (JESD204B/C) or a source
synchronous parallel interface (LVDS/CMOS).
Usually, some other interface type (i.e SPI) is used as a control interface
for the actual ADC, while the IP core (controlled via this driver), will
interface to the data-lines of the ADC and handle the streaming of data
into memory via DMA.
Because of this, the AXI ADC driver needs the other SPI-ADC driver to
register with it. The SPI-ADC needs to be register via the SPI framework,
while the AXI ADC registers as a platform driver. The two cannot be ordered
in a hierarchy as both drivers have their own registers, and trying to
organize this [in a hierarchy becomes] problematic when trying to map
memory/registers.
There are some modes where the AXI ADC can operate as standalone ADC, but
those will be implemented at a later point in time.
DocLink: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/iio/adc/Kconfig | 20 ++
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/adi-axi-adc.c | 485 ++++++++++++++++++++++++++++
include/linux/iio/adc/adi-axi-adc.h | 64 ++++
4 files changed, 570 insertions(+)
create mode 100644 drivers/iio/adc/adi-axi-adc.c
create mode 100644 include/linux/iio/adc/adi-axi-adc.h
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index f4da821c4022..445070abf376 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -246,6 +246,26 @@ config AD799X
To compile this driver as a module, choose M here: the module will be
called ad799x.
+config ADI_AXI_ADC
+ tristate "Analog Devices Generic AXI ADC IP core driver"
+ select IIO_BUFFER
+ select IIO_BUFFER_HW_CONSUMER
+ select IIO_BUFFER_DMAENGINE
+ help
+ Say yes here to build support for Analog Devices Generic
+ AXI ADC IP core. The IP core is used for interfacing with
+ analog-to-digital (ADC) converters that require either a high-speed
+ serial interface (JESD204B/C) or a source synchronous parallel
+ interface (LVDS/CMOS).
+ Typically (for such devices) SPI will be used for configuration only,
+ while this IP core handles the streaming of data into memory via DMA.
+
+ Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called adi-axi-adc.
+
config ASPEED_ADC
tristate "Aspeed ADC"
depends on ARCH_ASPEED || COMPILE_TEST
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 8462455b4228..7c6594d049f9 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_AD7793) += ad7793.o
obj-$(CONFIG_AD7887) += ad7887.o
obj-$(CONFIG_AD7949) += ad7949.o
obj-$(CONFIG_AD799X) += ad799x.o
+obj-$(CONFIG_ADI_AXI_ADC) += adi-axi-adc.o
obj-$(CONFIG_ASPEED_ADC) += aspeed_adc.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o
diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
new file mode 100644
index 000000000000..5357d2b8bcc6
--- /dev/null
+++ b/drivers/iio/adc/adi-axi-adc.c
@@ -0,0 +1,485 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices Generic AXI ADC IP core
+ * Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+ *
+ * Copyright 2012-2020 Analog Devices Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/buffer-dmaengine.h>
+
+#include <linux/fpga/adi-axi-common.h>
+#include <linux/iio/adc/adi-axi-adc.h>
+
+/**
+ * Register definitions:
+ * https://wiki.analog.com/resources/fpga/docs/axi_adc_ip#register_map
+ */
+
+/* ADC controls */
+
+#define ADI_AXI_REG_RSTN 0x0040
+#define ADI_AXI_REG_RSTN_CE_N BIT(2)
+#define ADI_AXI_REG_RSTN_MMCM_RSTN BIT(1)
+#define ADI_AXI_REG_RSTN_RSTN BIT(0)
+
+/* ADC Channel controls */
+
+#define ADI_AXI_REG_CHAN_CTRL(c) (0x0400 + (c) * 0x40)
+#define ADI_AXI_REG_CHAN_CTRL_LB_OWR BIT(11)
+#define ADI_AXI_REG_CHAN_CTRL_PN_SEL_OWR BIT(10)
+#define ADI_AXI_REG_CHAN_CTRL_IQCOR_EN BIT(9)
+#define ADI_AXI_REG_CHAN_CTRL_DCFILT_EN BIT(8)
+#define ADI_AXI_REG_CHAN_CTRL_FMT_SIGNEXT BIT(6)
+#define ADI_AXI_REG_CHAN_CTRL_FMT_TYPE BIT(5)
+#define ADI_AXI_REG_CHAN_CTRL_FMT_EN BIT(4)
+#define ADI_AXI_REG_CHAN_CTRL_PN_TYPE_OWR BIT(1)
+#define ADI_AXI_REG_CHAN_CTRL_ENABLE BIT(0)
+
+#define ADI_AXI_REG_CHAN_CTRL_DEFAULTS \
+ (ADI_AXI_REG_CHAN_CTRL_FMT_SIGNEXT | \
+ ADI_AXI_REG_CHAN_CTRL_FMT_EN | \
+ ADI_AXI_REG_CHAN_CTRL_ENABLE)
+
+struct adi_axi_adc_core_info {
+ unsigned int version;
+};
+
+struct adi_axi_adc_state {
+ struct mutex lock;
+
+ struct adi_axi_adc_client *client;
+ void __iomem *regs;
+};
+
+struct adi_axi_adc_client {
+ struct list_head entry;
+ struct adi_axi_adc_conv conv;
+ struct adi_axi_adc_state *state;
+ struct device *dev;
+ const struct adi_axi_adc_core_info *info;
+};
+
+static LIST_HEAD(registered_clients);
+static DEFINE_MUTEX(registered_clients_lock);
+
+static struct adi_axi_adc_client *conv_to_client(struct adi_axi_adc_conv *conv)
+{
+ return container_of(conv, struct adi_axi_adc_client, conv);
+}
+
+void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv)
+{
+ struct adi_axi_adc_client *cl = conv_to_client(conv);
+
+ return (char *)cl + ALIGN(sizeof(struct adi_axi_adc_client), IIO_ALIGN);
+}
+EXPORT_SYMBOL_GPL(adi_axi_adc_conv_priv);
+
+static void adi_axi_adc_write(struct adi_axi_adc_state *st,
+ unsigned int reg,
+ unsigned int val)
+{
+ iowrite32(val, st->regs + reg);
+}
+
+static unsigned int adi_axi_adc_read(struct adi_axi_adc_state *st,
+ unsigned int reg)
+{
+ return ioread32(st->regs + reg);
+}
+
+static int adi_axi_adc_config_dma_buffer(struct device *dev,
+ struct iio_dev *indio_dev)
+{
+ struct iio_buffer *buffer;
+ const char *dma_name;
+
+ if (!device_property_present(dev, "dmas"))
+ return 0;
+
+ if (device_property_read_string(dev, "dma-names", &dma_name))
+ dma_name = "rx";
+
+ buffer = devm_iio_dmaengine_buffer_alloc(indio_dev->dev.parent,
+ dma_name);
+ if (IS_ERR(buffer))
+ return PTR_ERR(buffer);
+
+ indio_dev->modes |= INDIO_BUFFER_HARDWARE;
+ iio_device_attach_buffer(indio_dev, buffer);
+
+ return 0;
+}
+
+static int adi_axi_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+
+ if (!conv->read_raw)
+ return -EOPNOTSUPP;
+
+ return conv->read_raw(conv, chan, val, val2, mask);
+}
+
+static int adi_axi_adc_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+
+ if (!conv->write_raw)
+ return -EOPNOTSUPP;
+
+ return conv->write_raw(conv, chan, val, val2, mask);
+}
+
+static int adi_axi_adc_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *scan_mask)
+{
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+ unsigned int i, ctrl;
+
+ for (i = 0; i < conv->chip_info->num_channels; i++) {
+ ctrl = adi_axi_adc_read(st, ADI_AXI_REG_CHAN_CTRL(i));
+
+ if (test_bit(i, scan_mask))
+ ctrl |= ADI_AXI_REG_CHAN_CTRL_ENABLE;
+ else
+ ctrl &= ~ADI_AXI_REG_CHAN_CTRL_ENABLE;
+
+ adi_axi_adc_write(st, ADI_AXI_REG_CHAN_CTRL(i), ctrl);
+ }
+
+ return 0;
+}
+
+static struct adi_axi_adc_conv *adi_axi_adc_conv_register(struct device *dev,
+ size_t sizeof_priv)
+{
+ struct adi_axi_adc_client *cl;
+ size_t alloc_size;
+
+ alloc_size = sizeof(struct adi_axi_adc_client);
+ if (sizeof_priv) {
+ alloc_size = ALIGN(alloc_size, IIO_ALIGN);
+ alloc_size += sizeof_priv;
+ }
+ alloc_size += IIO_ALIGN - 1;
+
+ cl = kzalloc(alloc_size, GFP_KERNEL);
+ if (!cl)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_lock(®istered_clients_lock);
+
+ cl->dev = get_device(dev);
+
+ list_add_tail(&cl->entry, ®istered_clients);
+
+ mutex_unlock(®istered_clients_lock);
+
+ return &cl->conv;
+}
+
+static void adi_axi_adc_conv_unregister(struct adi_axi_adc_conv *conv)
+{
+ struct adi_axi_adc_client *cl = conv_to_client(conv);
+
+ mutex_lock(®istered_clients_lock);
+
+ list_del(&cl->entry);
+ put_device(cl->dev);
+
+ mutex_unlock(®istered_clients_lock);
+
+ kfree(cl);
+}
+
+static void devm_adi_axi_adc_conv_release(struct device *dev, void *res)
+{
+ adi_axi_adc_conv_unregister(*(struct adi_axi_adc_conv **)res);
+}
+
+struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev,
+ size_t sizeof_priv)
+{
+ struct adi_axi_adc_conv **ptr, *conv;
+
+ ptr = devres_alloc(devm_adi_axi_adc_conv_release, sizeof(*ptr),
+ GFP_KERNEL);
+ if (!ptr)
+ return ERR_PTR(-ENOMEM);
+
+ conv = adi_axi_adc_conv_register(dev, sizeof_priv);
+ if (IS_ERR(conv)) {
+ devres_free(ptr);
+ return ERR_CAST(conv);
+ }
+
+ *ptr = conv;
+ devres_add(dev, ptr);
+
+ return conv;
+}
+EXPORT_SYMBOL_GPL(devm_adi_axi_adc_conv_register);
+
+static ssize_t in_voltage_scale_available_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+ size_t len = 0;
+ int i;
+
+ for (i = 0; i < conv->chip_info->num_scales; i++) {
+ const unsigned int *s = conv->chip_info->scale_table[i];
+
+ len += scnprintf(buf + len, PAGE_SIZE - len,
+ "%u.%06u ", s[0], s[1]);
+ }
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
+
+enum {
+ ADI_AXI_ATTR_SCALE_AVAIL,
+};
+
+#define ADI_AXI_ATTR(_en_, _file_) \
+ [ADI_AXI_ATTR_##_en_] = &iio_dev_attr_##_file_.dev_attr.attr
+
+static struct attribute *adi_axi_adc_attributes[] = {
+ ADI_AXI_ATTR(SCALE_AVAIL, in_voltage_scale_available),
+ NULL
+};
+
+static umode_t axi_adc_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+
+ switch (n) {
+ case ADI_AXI_ATTR_SCALE_AVAIL:
+ if (!conv->chip_info->num_scales)
+ return 0;
+ return attr->mode;
+ default:
+ return attr->mode;
+ }
+}
+
+static const struct attribute_group adi_axi_adc_attribute_group = {
+ .attrs = adi_axi_adc_attributes,
+ .is_visible = axi_adc_attr_is_visible,
+};
+
+static const struct iio_info adi_axi_adc_info = {
+ .read_raw = &adi_axi_adc_read_raw,
+ .write_raw = &adi_axi_adc_write_raw,
+ .attrs = &adi_axi_adc_attribute_group,
+ .update_scan_mode = &adi_axi_adc_update_scan_mode,
+};
+
+static const struct adi_axi_adc_core_info adi_axi_adc_10_0_a_info = {
+ .version = ADI_AXI_PCORE_VER(10, 0, 'a'),
+};
+
+struct adi_axi_adc_client *adi_axi_adc_attach_client(struct device *dev)
+{
+ const struct adi_axi_adc_core_info *info;
+ struct adi_axi_adc_client *cl;
+ struct device_node *cln;
+
+ info = of_device_get_match_data(dev);
+ if (!info)
+ return ERR_PTR(-ENODEV);
+
+ cln = of_parse_phandle(dev->of_node, "adi,adc-dev", 0);
+ if (!cln) {
+ dev_err(dev, "No 'adi,adc-dev' node defined\n");
+ return ERR_PTR(-ENODEV);
+ }
+
+ mutex_lock(®istered_clients_lock);
+
+ list_for_each_entry(cl, ®istered_clients, entry) {
+ if (!cl->dev)
+ continue;
+
+ if (cl->dev->of_node != cln)
+ continue;
+
+ if (!try_module_get(dev->driver->owner)) {
+ mutex_unlock(®istered_clients_lock);
+ return ERR_PTR(-ENODEV);
+ }
+
+ get_device(dev);
+ cl->info = info;
+ mutex_unlock(®istered_clients_lock);
+ return cl;
+ }
+
+ mutex_unlock(®istered_clients_lock);
+
+ return ERR_PTR(-EPROBE_DEFER);
+}
+
+static int adi_axi_adc_setup_channels(struct device *dev,
+ struct adi_axi_adc_state *st)
+{
+ struct adi_axi_adc_conv *conv = conv = &st->client->conv;
+ int i, ret;
+
+ if (conv->preenable_setup) {
+ ret = conv->preenable_setup(conv);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < conv->chip_info->num_channels; i++) {
+ adi_axi_adc_write(st, ADI_AXI_REG_CHAN_CTRL(i),
+ ADI_AXI_REG_CHAN_CTRL_DEFAULTS);
+ }
+
+ return 0;
+}
+
+static void axi_adc_reset(struct adi_axi_adc_state *st)
+{
+ adi_axi_adc_write(st, ADI_AXI_REG_RSTN, 0);
+ mdelay(10);
+ adi_axi_adc_write(st, ADI_AXI_REG_RSTN, ADI_AXI_REG_RSTN_MMCM_RSTN);
+ mdelay(10);
+ adi_axi_adc_write(st, ADI_AXI_REG_RSTN,
+ ADI_AXI_REG_RSTN_RSTN | ADI_AXI_REG_RSTN_MMCM_RSTN);
+}
+
+static void adi_axi_adc_cleanup(void *data)
+{
+ struct adi_axi_adc_client *cl = data;
+
+ put_device(cl->dev);
+ module_put(cl->dev->driver->owner);
+}
+
+static int adi_axi_adc_probe(struct platform_device *pdev)
+{
+ struct adi_axi_adc_conv *conv;
+ struct iio_dev *indio_dev;
+ struct adi_axi_adc_client *cl;
+ struct adi_axi_adc_state *st;
+ unsigned int ver;
+ int ret;
+
+ cl = adi_axi_adc_attach_client(&pdev->dev);
+ if (IS_ERR(cl))
+ return PTR_ERR(cl);
+
+ ret = devm_add_action_or_reset(&pdev->dev, adi_axi_adc_cleanup, cl);
+ if (ret)
+ return ret;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ st->client = cl;
+ cl->state = st;
+ mutex_init(&st->lock);
+
+ st->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(st->regs))
+ return PTR_ERR(st->regs);
+
+ conv = &st->client->conv;
+
+ axi_adc_reset(st);
+
+ ver = adi_axi_adc_read(st, ADI_AXI_REG_VERSION);
+
+ if (cl->info->version > ver) {
+ dev_err(&pdev->dev,
+ "IP core version is too old. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
+ ADI_AXI_PCORE_VER_MAJOR(cl->info->version),
+ ADI_AXI_PCORE_VER_MINOR(cl->info->version),
+ ADI_AXI_PCORE_VER_PATCH(cl->info->version),
+ ADI_AXI_PCORE_VER_MAJOR(ver),
+ ADI_AXI_PCORE_VER_MINOR(ver),
+ ADI_AXI_PCORE_VER_PATCH(ver));
+ return -ENODEV;
+ }
+
+ indio_dev->info = &adi_axi_adc_info;
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->name = "adi-axi-adc";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->num_channels = conv->chip_info->num_channels;
+ indio_dev->channels = conv->chip_info->channels;
+
+ ret = adi_axi_adc_config_dma_buffer(&pdev->dev, indio_dev);
+ if (ret)
+ return ret;
+
+ ret = adi_axi_adc_setup_channels(&pdev->dev, st);
+ if (ret)
+ return ret;
+
+ ret = devm_iio_device_register(&pdev->dev, indio_dev);
+ if (ret)
+ return ret;
+
+ dev_info(&pdev->dev, "AXI ADC IP core (%d.%.2d.%c) probed\n",
+ ADI_AXI_PCORE_VER_MAJOR(ver),
+ ADI_AXI_PCORE_VER_MINOR(ver),
+ ADI_AXI_PCORE_VER_PATCH(ver));
+
+ return 0;
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id adi_axi_adc_of_match[] = {
+ { .compatible = "adi,axi-adc-10.0.a", .data = &adi_axi_adc_10_0_a_info },
+ { /* end of list */ }
+};
+MODULE_DEVICE_TABLE(of, adi_axi_adc_of_match);
+
+static struct platform_driver adi_axi_adc_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = adi_axi_adc_of_match,
+ },
+ .probe = adi_axi_adc_probe,
+};
+module_platform_driver(adi_axi_adc_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices Generic AXI ADC IP core driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/adc/adi-axi-adc.h b/include/linux/iio/adc/adi-axi-adc.h
new file mode 100644
index 000000000000..c5d48e1c2d36
--- /dev/null
+++ b/include/linux/iio/adc/adi-axi-adc.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Analog Devices Generic AXI ADC IP core driver/library
+ * Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+ *
+ * Copyright 2012-2020 Analog Devices Inc.
+ */
+#ifndef __ADI_AXI_ADC_H__
+#define __ADI_AXI_ADC_H__
+
+struct device;
+struct iio_chan_spec;
+
+/**
+ * struct adi_axi_adc_chip_info - Chip specific information
+ * @name Chip name
+ * @id Chip ID (usually product ID)
+ * @channels Channel specifications of type @struct axi_adc_chan_spec
+ * @num_channels Number of @channels
+ * @scale_table Supported scales by the chip; tuples of 2 ints
+ * @num_scales Number of scales in the table
+ * @max_rate Maximum sampling rate supported by the device
+ */
+struct adi_axi_adc_chip_info {
+ const char *name;
+ unsigned int id;
+
+ const struct iio_chan_spec *channels;
+ unsigned int num_channels;
+
+ const unsigned int (*scale_table)[2];
+ int num_scales;
+
+ unsigned long max_rate;
+};
+
+/**
+ * struct adi_axi_adc_conv - data of the ADC attached to the AXI ADC
+ * @chip_info chip info details for the client ADC
+ * @preenable_setup op to run in the client before enabling the AXI ADC
+ * @reg_access IIO debugfs_reg_access hook for the client ADC
+ * @read_raw IIO read_raw hook for the client ADC
+ * @write_raw IIO write_raw hook for the client ADC
+ */
+struct adi_axi_adc_conv {
+ const struct adi_axi_adc_chip_info *chip_info;
+
+ int (*preenable_setup)(struct adi_axi_adc_conv *conv);
+ int (*reg_access)(struct adi_axi_adc_conv *conv, unsigned int reg,
+ unsigned int writeval, unsigned int *readval);
+ int (*read_raw)(struct adi_axi_adc_conv *conv,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask);
+ int (*write_raw)(struct adi_axi_adc_conv *conv,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask);
+};
+
+struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev,
+ size_t sizeof_priv);
+
+void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv);
+
+#endif
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v12 6/8] dt-bindings: iio: adc: add bindings doc for AXI ADC driver
2020-03-22 17:53 [PATCH v12 0/8] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC Alexandru Ardelean
` (4 preceding siblings ...)
2020-03-22 17:53 ` [PATCH v12 5/8] iio: adc: adi-axi-adc: add support for AXI ADC IP core Alexandru Ardelean
@ 2020-03-22 17:53 ` Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 7/8] iio: adc: ad9467: add support AD9467 ADC Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 8/8] dt-bindings: iio: adc: add bindings doc for " Alexandru Ardelean
7 siblings, 0 replies; 9+ messages in thread
From: Alexandru Ardelean @ 2020-03-22 17:53 UTC (permalink / raw)
To: linux-iio, linux-kernel, devicetree
Cc: jic23, robh+dt, Laszlo.Nagy, Andrei.Grozav, Michael.Hennerich,
Istvan.Csomortani, Adrian.Costina, Dragos.Bogdan,
Alexandru Ardelean
This change adds the bindings documentation for the AXI ADC driver.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
.../bindings/iio/adc/adi,axi-adc.yaml | 62 +++++++++++++++++++
1 file changed, 62 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
new file mode 100644
index 000000000000..0924b2b4972b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI ADC IP core
+
+maintainers:
+ - Michael Hennerich <michael.hennerich@analog.com>
+ - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+ Analog Devices Generic AXI ADC IP core for interfacing an ADC device
+ with a high speed serial (JESD204B/C) or source synchronous parallel
+ interface (LVDS/CMOS).
+ Usually, some other interface type (i.e SPI) is used as a control
+ interface for the actual ADC, while this IP core will interface
+ to the data-lines of the ADC and handle the streaming of data into
+ memory via DMA.
+
+ https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+
+properties:
+ compatible:
+ enum:
+ - adi,axi-adc-10.0.a
+
+ reg:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ items:
+ - const: rx
+
+ adi,adc-dev:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ A reference to a the actual ADC to which this FPGA ADC interfaces to.
+
+required:
+ - compatible
+ - dmas
+ - reg
+ - adi,adc-dev
+
+additionalProperties: false
+
+examples:
+ - |
+ axi-adc@44a00000 {
+ compatible = "adi,axi-adc-10.0.a";
+ reg = <0x44a00000 0x10000>;
+ dmas = <&rx_dma 0>;
+ dma-names = "rx";
+
+ adi,adc-dev = <&spi_adc>;
+ };
+...
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v12 7/8] iio: adc: ad9467: add support AD9467 ADC
2020-03-22 17:53 [PATCH v12 0/8] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC Alexandru Ardelean
` (5 preceding siblings ...)
2020-03-22 17:53 ` [PATCH v12 6/8] dt-bindings: iio: adc: add bindings doc for AXI ADC driver Alexandru Ardelean
@ 2020-03-22 17:53 ` Alexandru Ardelean
2020-03-22 17:53 ` [PATCH v12 8/8] dt-bindings: iio: adc: add bindings doc for " Alexandru Ardelean
7 siblings, 0 replies; 9+ messages in thread
From: Alexandru Ardelean @ 2020-03-22 17:53 UTC (permalink / raw)
To: linux-iio, linux-kernel, devicetree
Cc: jic23, robh+dt, Laszlo.Nagy, Andrei.Grozav, Michael.Hennerich,
Istvan.Csomortani, Adrian.Costina, Dragos.Bogdan,
Michael Hennerich, Lars-Peter Clausen, Alexandru Ardelean
From: Michael Hennerich <michael.hennerich@analog.com>
The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital converter
(ADC). It is optimized for high performanceover wide bandwidths and ease of
use. The product operates at a 250 MSPS conversion rate and is designed for
wireless receivers, instrumentation, and test equipment that require a high
dynamic range. The ADC requires 1.8 V and 3.3 V power supplies and a low
voltage differential input clock for full performance operation. No
external reference or driver components are required for many applications.
Data outputs are LVDS compatible (ANSI-644 compatible) and include the
means to reduce the overall current needed for short trace distances.
Since the chip can operate at such high sample-rates (much higher than
classical interfaces), it requires that a DMA controller be used to
interface directly to the chip and push data into memory.
Typically, the AXI ADC IP core is used to interface with it.
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/iio/adc/Kconfig | 15 ++
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ad9467.c | 420 +++++++++++++++++++++++++++++++++++++++
3 files changed, 436 insertions(+)
create mode 100644 drivers/iio/adc/ad9467.c
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 445070abf376..a0796510f9d4 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -246,6 +246,21 @@ config AD799X
To compile this driver as a module, choose M here: the module will be
called ad799x.
+config AD9467
+ tristate "Analog Devices AD9467 High Speed ADC driver"
+ depends on SPI
+ select ADI_AXI_ADC
+ help
+ Say yes here to build support for Analog Devices:
+ * AD9467 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter
+
+ The driver requires the assistance of the AXI ADC IP core to operate,
+ since SPI is used for configuration only, while data has to be
+ streamed into memory via DMA.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ad9467.
+
config ADI_AXI_ADC
tristate "Analog Devices Generic AXI ADC IP core driver"
select IIO_BUFFER
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 7c6594d049f9..59722770a654 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_AD7793) += ad7793.o
obj-$(CONFIG_AD7887) += ad7887.o
obj-$(CONFIG_AD7949) += ad7949.o
obj-$(CONFIG_AD799X) += ad799x.o
+obj-$(CONFIG_AD9467) += ad9467.o
obj-$(CONFIG_ADI_AXI_ADC) += adi-axi-adc.o
obj-$(CONFIG_ASPEED_ADC) += aspeed_adc.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
new file mode 100644
index 000000000000..82f6235a9288
--- /dev/null
+++ b/drivers/iio/adc/ad9467.c
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices AD9467 SPI ADC driver
+ *
+ * Copyright 2012-2020 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_device.h>
+
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include <linux/clk.h>
+
+#include <linux/iio/adc/adi-axi-adc.h>
+
+/*
+ * ADI High-Speed ADC common spi interface registers
+ * See Application-Note AN-877:
+ * https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf
+ */
+
+#define AN877_ADC_REG_CHIP_PORT_CONF 0x00
+#define AN877_ADC_REG_CHIP_ID 0x01
+#define AN877_ADC_REG_CHIP_GRADE 0x02
+#define AN877_ADC_REG_CHAN_INDEX 0x05
+#define AN877_ADC_REG_TRANSFER 0xFF
+#define AN877_ADC_REG_MODES 0x08
+#define AN877_ADC_REG_TEST_IO 0x0D
+#define AN877_ADC_REG_ADC_INPUT 0x0F
+#define AN877_ADC_REG_OFFSET 0x10
+#define AN877_ADC_REG_OUTPUT_MODE 0x14
+#define AN877_ADC_REG_OUTPUT_ADJUST 0x15
+#define AN877_ADC_REG_OUTPUT_PHASE 0x16
+#define AN877_ADC_REG_OUTPUT_DELAY 0x17
+#define AN877_ADC_REG_VREF 0x18
+#define AN877_ADC_REG_ANALOG_INPUT 0x2C
+
+/* AN877_ADC_REG_TEST_IO */
+#define AN877_ADC_TESTMODE_OFF 0x0
+#define AN877_ADC_TESTMODE_MIDSCALE_SHORT 0x1
+#define AN877_ADC_TESTMODE_POS_FULLSCALE 0x2
+#define AN877_ADC_TESTMODE_NEG_FULLSCALE 0x3
+#define AN877_ADC_TESTMODE_ALT_CHECKERBOARD 0x4
+#define AN877_ADC_TESTMODE_PN23_SEQ 0x5
+#define AN877_ADC_TESTMODE_PN9_SEQ 0x6
+#define AN877_ADC_TESTMODE_ONE_ZERO_TOGGLE 0x7
+#define AN877_ADC_TESTMODE_USER 0x8
+#define AN877_ADC_TESTMODE_BIT_TOGGLE 0x9
+#define AN877_ADC_TESTMODE_SYNC 0xA
+#define AN877_ADC_TESTMODE_ONE_BIT_HIGH 0xB
+#define AN877_ADC_TESTMODE_MIXED_BIT_FREQUENCY 0xC
+#define AN877_ADC_TESTMODE_RAMP 0xF
+
+/* AN877_ADC_REG_TRANSFER */
+#define AN877_ADC_TRANSFER_SYNC 0x1
+
+/* AN877_ADC_REG_OUTPUT_MODE */
+#define AN877_ADC_OUTPUT_MODE_OFFSET_BINARY 0x0
+#define AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT 0x1
+#define AN877_ADC_OUTPUT_MODE_GRAY_CODE 0x2
+
+/* AN877_ADC_REG_OUTPUT_PHASE */
+#define AN877_ADC_OUTPUT_EVEN_ODD_MODE_EN 0x20
+#define AN877_ADC_INVERT_DCO_CLK 0x80
+
+/* AN877_ADC_REG_OUTPUT_DELAY */
+#define AN877_ADC_DCO_DELAY_ENABLE 0x80
+
+/*
+ * Analog Devices AD9467 16-Bit, 200/250 MSPS ADC
+ */
+
+#define CHIPID_AD9467 0x50
+#define AD9467_DEF_OUTPUT_MODE 0x08
+#define AD9467_REG_VREF_MASK 0x0F
+
+enum {
+ ID_AD9467,
+};
+
+struct ad9467_state {
+ struct spi_device *spi;
+ struct clk *clk;
+ unsigned int output_mode;
+
+ struct gpio_desc *pwrdown_gpio;
+ struct gpio_desc *reset_gpio;
+};
+
+static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
+{
+ unsigned char tbuf[2], rbuf[1];
+ int ret;
+
+ tbuf[0] = 0x80 | (reg >> 8);
+ tbuf[1] = reg & 0xFF;
+
+ ret = spi_write_then_read(spi,
+ tbuf, ARRAY_SIZE(tbuf),
+ rbuf, ARRAY_SIZE(rbuf));
+
+ if (ret < 0)
+ return ret;
+
+ return rbuf[0];
+}
+
+static int ad9467_spi_write(struct spi_device *spi, unsigned int reg,
+ unsigned int val)
+{
+ unsigned char buf[3];
+
+ buf[0] = reg >> 8;
+ buf[1] = reg & 0xFF;
+ buf[2] = val;
+
+ return spi_write(spi, buf, ARRAY_SIZE(buf));
+}
+
+static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg,
+ unsigned int writeval, unsigned int *readval)
+{
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+ struct spi_device *spi = st->spi;
+ int ret;
+
+ if (readval == NULL) {
+ ret = ad9467_spi_write(spi, reg, writeval);
+ ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER,
+ AN877_ADC_TRANSFER_SYNC);
+ return ret;
+ }
+
+ ret = ad9467_spi_read(spi, reg);
+ if (ret < 0)
+ return ret;
+ *readval = ret;
+
+ return 0;
+}
+
+static const unsigned int ad9467_scale_table[][2] = {
+ {2000, 0}, {2100, 6}, {2200, 7},
+ {2300, 8}, {2400, 9}, {2500, 10},
+};
+
+static void __ad9467_get_scale(struct adi_axi_adc_conv *conv, int index,
+ unsigned int *val, unsigned int *val2)
+{
+ const struct adi_axi_adc_chip_info *info = conv->chip_info;
+ const struct iio_chan_spec *chan = &info->channels[0];
+ unsigned int tmp;
+
+ tmp = (info->scale_table[index][0] * 1000000ULL) >>
+ chan->scan_type.realbits;
+ *val = tmp / 1000000;
+ *val2 = tmp % 1000000;
+}
+
+#define AD9467_CHAN(_chan, _si, _bits, _sign) \
+{ \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = _chan, \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = _si, \
+ .scan_type = { \
+ .sign = _sign, \
+ .realbits = _bits, \
+ .storagebits = 16, \
+ }, \
+}
+
+static const struct iio_chan_spec ad9467_channels[] = {
+ AD9467_CHAN(0, 0, 16, 'S'),
+};
+
+static const struct adi_axi_adc_chip_info ad9467_chip_tbl[] = {
+ [ID_AD9467] = {
+ .id = CHIPID_AD9467,
+ .max_rate = 250000000UL,
+ .scale_table = ad9467_scale_table,
+ .num_scales = ARRAY_SIZE(ad9467_scale_table),
+ .channels = ad9467_channels,
+ .num_channels = ARRAY_SIZE(ad9467_channels),
+ },
+};
+
+static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2)
+{
+ const struct adi_axi_adc_chip_info *info = conv->chip_info;
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+ unsigned int i, vref_val, vref_mask;
+
+ vref_val = ad9467_spi_read(st->spi, AN877_ADC_REG_VREF);
+
+ switch (info->id) {
+ case CHIPID_AD9467:
+ vref_mask = AD9467_REG_VREF_MASK;
+ break;
+ default:
+ vref_mask = 0xFFFF;
+ break;
+ }
+
+ vref_val &= vref_mask;
+
+ for (i = 0; i < info->num_scales; i++) {
+ if (vref_val == info->scale_table[i][1])
+ break;
+ }
+
+ if (i == info->num_scales)
+ return -ERANGE;
+
+ __ad9467_get_scale(conv, i, val, val2);
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2)
+{
+ const struct adi_axi_adc_chip_info *info = conv->chip_info;
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+ unsigned int scale_val[2];
+ unsigned int i;
+
+ if (val != 0)
+ return -EINVAL;
+
+ for (i = 0; i < info->num_scales; i++) {
+ __ad9467_get_scale(conv, i, &scale_val[0], &scale_val[1]);
+ if (scale_val[0] != val || scale_val[1] != val2)
+ continue;
+
+ ad9467_spi_write(st->spi, AN877_ADC_REG_VREF,
+ info->scale_table[i][1]);
+ ad9467_spi_write(st->spi, AN877_ADC_REG_TRANSFER,
+ AN877_ADC_TRANSFER_SYNC);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int ad9467_read_raw(struct adi_axi_adc_conv *conv,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long m)
+{
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+
+ switch (m) {
+ case IIO_CHAN_INFO_SCALE:
+ return ad9467_get_scale(conv, val, val2);
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = clk_get_rate(st->clk);
+
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ad9467_write_raw(struct adi_axi_adc_conv *conv,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ const struct adi_axi_adc_chip_info *info = conv->chip_info;
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+ unsigned long r_clk;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return ad9467_set_scale(conv, val, val2);
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ r_clk = clk_round_rate(st->clk, val);
+ if (r_clk < 0 || r_clk > info->max_rate) {
+ dev_warn(&st->spi->dev,
+ "Error setting ADC sample rate %ld", r_clk);
+ return -EINVAL;
+ }
+
+ return clk_set_rate(st->clk, r_clk);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode)
+{
+ int ret;
+
+ ret = ad9467_spi_write(spi, AN877_ADC_REG_OUTPUT_MODE, mode);
+ if (ret < 0)
+ return ret;
+
+ return ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER,
+ AN877_ADC_TRANSFER_SYNC);
+}
+
+static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv)
+{
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+
+ return ad9467_outputmode_set(st->spi, st->output_mode);
+}
+
+static int ad9467_setup(struct ad9467_state *st, unsigned int chip_id)
+{
+ switch (chip_id) {
+ case CHIPID_AD9467:
+ st->output_mode = AD9467_DEF_OUTPUT_MODE |
+ AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static void ad9467_clk_disable(void *data)
+{
+ struct ad9467_state *st = data;
+
+ clk_disable_unprepare(st->clk);
+}
+
+static int ad9467_probe(struct spi_device *spi)
+{
+ const struct adi_axi_adc_chip_info *info;
+ struct adi_axi_adc_conv *conv;
+ struct ad9467_state *st;
+ unsigned int id;
+ int ret;
+
+ info = of_device_get_match_data(&spi->dev);
+ if (!info)
+ return -ENODEV;
+
+ conv = devm_adi_axi_adc_conv_register(&spi->dev, sizeof(*st));
+ if (IS_ERR(conv))
+ return PTR_ERR(conv);
+
+ st = adi_axi_adc_conv_priv(conv);
+ st->spi = spi;
+
+ st->clk = devm_clk_get(&spi->dev, "adc-clk");
+ if (IS_ERR(st->clk))
+ return PTR_ERR(st->clk);
+
+ ret = clk_prepare_enable(st->clk);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_add_action_or_reset(&spi->dev, ad9467_clk_disable, st);
+ if (ret)
+ return ret;
+
+ st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->pwrdown_gpio))
+ return PTR_ERR(st->pwrdown_gpio);
+
+ st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->reset_gpio))
+ return PTR_ERR(st->reset_gpio);
+
+ if (st->reset_gpio) {
+ udelay(1);
+ ret = gpiod_direction_output(st->reset_gpio, 1);
+ mdelay(10);
+ }
+
+ spi_set_drvdata(spi, st);
+
+ conv->chip_info = info;
+
+ id = ad9467_spi_read(spi, AN877_ADC_REG_CHIP_ID);
+ if (id != conv->chip_info->id) {
+ dev_err(&spi->dev, "Unrecognized CHIP_ID 0x%X\n", id);
+ return -ENODEV;
+ }
+
+ conv->reg_access = ad9467_reg_access;
+ conv->write_raw = ad9467_write_raw;
+ conv->read_raw = ad9467_read_raw;
+ conv->preenable_setup = ad9467_preenable_setup;
+
+ return ad9467_setup(st, id);
+}
+
+static const struct of_device_id ad9467_of_match[] = {
+ { .compatible = "adi,ad9467", .data = &ad9467_chip_tbl[ID_AD9467], },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ad9467_of_match);
+
+static struct spi_driver ad9467_driver = {
+ .driver = {
+ .name = "ad9467",
+ .of_match_table = ad9467_of_match,
+ },
+ .probe = ad9467_probe,
+};
+module_spi_driver(ad9467_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD9467 ADC driver");
+MODULE_LICENSE("GPL v2");
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v12 8/8] dt-bindings: iio: adc: add bindings doc for AD9467 ADC
2020-03-22 17:53 [PATCH v12 0/8] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC Alexandru Ardelean
` (6 preceding siblings ...)
2020-03-22 17:53 ` [PATCH v12 7/8] iio: adc: ad9467: add support AD9467 ADC Alexandru Ardelean
@ 2020-03-22 17:53 ` Alexandru Ardelean
7 siblings, 0 replies; 9+ messages in thread
From: Alexandru Ardelean @ 2020-03-22 17:53 UTC (permalink / raw)
To: linux-iio, linux-kernel, devicetree
Cc: jic23, robh+dt, Laszlo.Nagy, Andrei.Grozav, Michael.Hennerich,
Istvan.Csomortani, Adrian.Costina, Dragos.Bogdan,
Alexandru Ardelean
This change adds the binding doc for the AD9467 ADC.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
.../bindings/iio/adc/adi,ad9467.yaml | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
new file mode 100644
index 000000000000..c4f57fa6aad1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad9467.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD9467 High-Speed ADC
+
+maintainers:
+ - Michael Hennerich <michael.hennerich@analog.com>
+ - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+ The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital
+ converter (ADC).
+
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ad9467
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: adc-clk
+
+ powerdown-gpios:
+ description:
+ Pin that controls the powerdown mode of the device.
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ Reset pin for the device.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad9467";
+ reg = <0>;
+ clocks = <&adc_clk>;
+ clock-names = "adc-clk";
+ };
+ };
+...
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread