Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v7 0/7] mfd: rn5t618: Add RTC/ADC support
@ 2020-03-20  8:10 Andreas Kemnade
  2020-03-20  8:10 ` [PATCH v7 1/7] dt-bindings: mfd: rn5t618: Document optional property interrupts Andreas Kemnade
                   ` (7 more replies)
  0 siblings, 8 replies; 12+ messages in thread
From: Andreas Kemnade @ 2020-03-20  8:10 UTC (permalink / raw)
  To: lee.jones, robh+dt, mark.rutland, a.zummo, alexandre.belloni,
	devicetree, linux-kernel, linux-rtc, stefan, b.galvani, phh,
	letux-kernel, knaack.h, lars, pmeerw, linux-iio, jic23
  Cc: Andreas Kemnade

In the variant RC5T619 the mfd has an RTC. This patchset adds
support for it. To do so it adds the missing register defines in 
rn5t618.h and general irq handling for that.
It seems that the IRQ definitions are the same except missing RTC
for the RN5T618 but due to missing ability to test that they are
not added here.
It also adds support for the ADC, it is available in both the
RN5T618 and RC5T619 but due to missing ability to test that,
the subdevice is only added for the RC5T619.

It was tested on the Kobo Clara HD.

Changes in v7:
- cleanup in IRQ init stuff

Changes in v6:
- put together with ADC series
- also added cleanup i2_device_id patch to avoid merge
  conflicts

Changes in v5:
- static rn5t618_irq_init
- PLATFORM_DEVID_NONE
- added some Acked-Bys

Changes in v4:
- use macros for IRQ definitions
- merge rn5t618-core.c and rn5t618-irq.c

Changes in v3:
- alignment cleanup
- output cleanup, remove useless toggling of alarm flag in rtc probe
- updated bindings description, so patch 1/5 becomes 2/6 and so on

Changes in v2:
- no dead code in irq code
- various improvements and cleanups in rtc driver itself


Andreas Kemnade (7):
  dt-bindings: mfd: rn5t618: Document optional property interrupts
  mfd: rn5t618: add IRQ support
  mfd: rn5t618: add RTC related registers
  mfd: rn5t618: add more subdevices
  rtc: rc5t619: add Ricoh RC5T619 RTC driver
  iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  mfd: rn5t618: cleanup i2c_device_id

 .../devicetree/bindings/mfd/rn5t618.txt       |   4 +
 drivers/iio/adc/Kconfig                       |  10 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/rn5t618-adc.c                 | 256 ++++++++++
 drivers/mfd/Kconfig                           |   1 +
 drivers/mfd/rn5t618.c                         | 109 ++++-
 drivers/rtc/Kconfig                           |  10 +
 drivers/rtc/Makefile                          |   1 +
 drivers/rtc/rtc-rc5t619.c                     | 444 ++++++++++++++++++
 include/linux/mfd/rn5t618.h                   |  26 +
 10 files changed, 851 insertions(+), 11 deletions(-)
 create mode 100644 drivers/iio/adc/rn5t618-adc.c
 create mode 100644 drivers/rtc/rtc-rc5t619.c

-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v7 1/7] dt-bindings: mfd: rn5t618: Document optional property interrupts
  2020-03-20  8:10 [PATCH v7 0/7] mfd: rn5t618: Add RTC/ADC support Andreas Kemnade
@ 2020-03-20  8:10 ` Andreas Kemnade
  2020-03-20  8:11 ` [PATCH v7 2/7] mfd: rn5t618: add IRQ support Andreas Kemnade
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 12+ messages in thread
From: Andreas Kemnade @ 2020-03-20  8:10 UTC (permalink / raw)
  To: lee.jones, robh+dt, mark.rutland, a.zummo, alexandre.belloni,
	devicetree, linux-kernel, linux-rtc, stefan, b.galvani, phh,
	letux-kernel, knaack.h, lars, pmeerw, linux-iio, jic23
  Cc: Andreas Kemnade, Rob Herring

These chips use interrupts for various things like RTC alarm.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v4: add refernce to interrupt binding
documentation
 Documentation/devicetree/bindings/mfd/rn5t618.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt
index b74e5e94d1cb..16778ea00dbc 100644
--- a/Documentation/devicetree/bindings/mfd/rn5t618.txt
+++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt
@@ -15,6 +15,8 @@ Required properties:
  - reg: the I2C slave address of the device
 
 Optional properties:
+ - interrupts: interrupt mapping for IRQ
+   See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
  - system-power-controller:
    See Documentation/devicetree/bindings/power/power-controller.txt
 
@@ -32,6 +34,8 @@ Example:
 	pmic@32 {
 		compatible = "ricoh,rn5t618";
 		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 		system-power-controller;
 
 		regulators {
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v7 2/7] mfd: rn5t618: add IRQ support
  2020-03-20  8:10 [PATCH v7 0/7] mfd: rn5t618: Add RTC/ADC support Andreas Kemnade
  2020-03-20  8:10 ` [PATCH v7 1/7] dt-bindings: mfd: rn5t618: Document optional property interrupts Andreas Kemnade
@ 2020-03-20  8:11 ` Andreas Kemnade
  2020-03-24 10:33   ` Lee Jones
  2020-03-20  8:11 ` [PATCH v7 3/7] mfd: rn5t618: add RTC related registers Andreas Kemnade
                   ` (5 subsequent siblings)
  7 siblings, 1 reply; 12+ messages in thread
From: Andreas Kemnade @ 2020-03-20  8:11 UTC (permalink / raw)
  To: lee.jones, robh+dt, mark.rutland, a.zummo, alexandre.belloni,
	devicetree, linux-kernel, linux-rtc, stefan, b.galvani, phh,
	letux-kernel, knaack.h, lars, pmeerw, linux-iio, jic23
  Cc: Andreas Kemnade

This adds support for IRQ handling in the RC5T619 which is required
for properly implementing subdevices like RTC.
For now only definitions for the variant RC5T619 are included.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
Changes in v7:
more cleanups in IRQ init

Changes in v5:
rn5t618_irq_init static

Changes in v4:
merge rn5t618-irq.c into rn5t618.c
use macros for IRQ table

Changes in v3:
alignment cleanup

Changes in v2:
- no dead code, did some more testing and thinking for that
- remove extra empty lines
 drivers/mfd/Kconfig         |  1 +
 drivers/mfd/rn5t618.c       | 78 ++++++++++++++++++++++++++++++++++++-
 include/linux/mfd/rn5t618.h | 15 +++++++
 3 files changed, 93 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2b203290e7b9..a7067888a41e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1058,6 +1058,7 @@ config MFD_RN5T618
 	depends on OF
 	select MFD_CORE
 	select REGMAP_I2C
+	select REGMAP_IRQ
 	help
 	  Say yes here to add support for the Ricoh RN5T567,
 	  RN5T618, RC5T619 PMIC.
diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index ead2e79036a9..b66dc4605d56 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -8,6 +8,8 @@
 
 #include <linux/delay.h>
 #include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/rn5t618.h>
 #include <linux/module.h>
@@ -46,9 +48,56 @@ static const struct regmap_config rn5t618_regmap_config = {
 	.cache_type	= REGCACHE_RBTREE,
 };
 
+static const struct regmap_irq rc5t619_irqs[] = {
+	REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
+};
+
+static const struct regmap_irq_chip rc5t619_irq_chip = {
+	.name = "rc5t619",
+	.irqs = rc5t619_irqs,
+	.num_irqs = ARRAY_SIZE(rc5t619_irqs),
+	.num_regs = 1,
+	.status_base = RN5T618_INTMON,
+	.mask_base = RN5T618_INTEN,
+	.mask_invert = true,
+};
+
 static struct rn5t618 *rn5t618_pm_power_off;
 static struct notifier_block rn5t618_restart_handler;
 
+static int rn5t618_irq_init(struct rn5t618 *rn5t618)
+{
+	const struct regmap_irq_chip *irq_chip = NULL;
+	int ret;
+
+	if (!rn5t618->irq)
+		return 0;
+
+	switch (rn5t618->variant) {
+	case RC5T619:
+		irq_chip = &rc5t619_irq_chip;
+		break;
+	default:
+		dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n",
+			(int)rn5t618->variant);
+		return -ENOENT;
+	}
+
+	ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
+				       rn5t618->irq,
+				       IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				       0, irq_chip, &rn5t618->irq_data);
+	if (ret)
+		dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
+
+	return ret;
+}
+
 static void rn5t618_trigger_poweroff_sequence(bool repower)
 {
 	/* disable automatic repower-on */
@@ -106,6 +155,8 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
 
 	i2c_set_clientdata(i2c, priv);
 	priv->variant = (long)of_id->data;
+	priv->irq = i2c->irq;
+	priv->dev = &i2c->dev;
 
 	priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
 	if (IS_ERR(priv->regmap)) {
@@ -138,7 +189,7 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	return 0;
+	return rn5t618_irq_init(priv);
 }
 
 static int rn5t618_i2c_remove(struct i2c_client *i2c)
@@ -155,15 +206,40 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
 	return 0;
 }
 
+static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
+{
+	struct rn5t618 *priv = dev_get_drvdata(dev);
+
+	if (priv->irq)
+		disable_irq(priv->irq);
+
+	return 0;
+}
+
+static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
+{
+	struct rn5t618 *priv = dev_get_drvdata(dev);
+
+	if (priv->irq)
+		enable_irq(priv->irq);
+
+	return 0;
+}
+
 static const struct i2c_device_id rn5t618_i2c_id[] = {
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, rn5t618_i2c_id);
 
+static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
+			rn5t618_i2c_suspend,
+			rn5t618_i2c_resume);
+
 static struct i2c_driver rn5t618_i2c_driver = {
 	.driver = {
 		.name = "rn5t618",
 		.of_match_table = of_match_ptr(rn5t618_of_match),
+		.pm = &rn5t618_i2c_dev_pm_ops,
 	},
 	.probe = rn5t618_i2c_probe,
 	.remove = rn5t618_i2c_remove,
diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
index d62ef48060b5..739571656f2b 100644
--- a/include/linux/mfd/rn5t618.h
+++ b/include/linux/mfd/rn5t618.h
@@ -242,9 +242,24 @@ enum {
 	RC5T619,
 };
 
+/* RN5T618 IRQ definitions */
+enum {
+	RN5T618_IRQ_SYS = 0,
+	RN5T618_IRQ_DCDC,
+	RN5T618_IRQ_RTC,
+	RN5T618_IRQ_ADC,
+	RN5T618_IRQ_GPIO,
+	RN5T618_IRQ_CHG,
+	RN5T618_NR_IRQS,
+};
+
 struct rn5t618 {
 	struct regmap *regmap;
+	struct device *dev;
 	long variant;
+
+	int irq;
+	struct regmap_irq_chip_data *irq_data;
 };
 
 #endif /* __LINUX_MFD_RN5T618_H */
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v7 3/7] mfd: rn5t618: add RTC related registers
  2020-03-20  8:10 [PATCH v7 0/7] mfd: rn5t618: Add RTC/ADC support Andreas Kemnade
  2020-03-20  8:10 ` [PATCH v7 1/7] dt-bindings: mfd: rn5t618: Document optional property interrupts Andreas Kemnade
  2020-03-20  8:11 ` [PATCH v7 2/7] mfd: rn5t618: add IRQ support Andreas Kemnade
@ 2020-03-20  8:11 ` Andreas Kemnade
  2020-03-20  8:11 ` [PATCH v7 4/7] mfd: rn5t618: add more subdevices Andreas Kemnade
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 12+ messages in thread
From: Andreas Kemnade @ 2020-03-20  8:11 UTC (permalink / raw)
  To: lee.jones, robh+dt, mark.rutland, a.zummo, alexandre.belloni,
	devicetree, linux-kernel, linux-rtc, stefan, b.galvani, phh,
	letux-kernel, knaack.h, lars, pmeerw, linux-iio, jic23
  Cc: Andreas Kemnade

Defines for some RTC related registers were missing, also
they were not included in the volatile register list

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---

 drivers/mfd/rn5t618.c       |  2 ++
 include/linux/mfd/rn5t618.h | 11 +++++++++++
 2 files changed, 13 insertions(+)

diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index b66dc4605d56..7686cc36e8c0 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -34,6 +34,8 @@ static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
 	case RN5T618_IR_GPF:
 	case RN5T618_MON_IOIN:
 	case RN5T618_INTMON:
+	case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2:
+	case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR:
 		return true;
 	default:
 		return false;
diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
index 739571656f2b..fba0df13d9a8 100644
--- a/include/linux/mfd/rn5t618.h
+++ b/include/linux/mfd/rn5t618.h
@@ -139,6 +139,17 @@
 #define RN5T618_INTPOL			0x9c
 #define RN5T618_INTEN			0x9d
 #define RN5T618_INTMON			0x9e
+
+#define RN5T618_RTC_SECONDS     0xA0
+#define RN5T618_RTC_MDAY        0xA4
+#define RN5T618_RTC_MONTH       0xA5
+#define RN5T618_RTC_YEAR        0xA6
+#define RN5T618_RTC_ADJUST      0xA7
+#define RN5T618_RTC_ALARM_Y_SEC 0xA8
+#define RN5T618_RTC_DAL_MONTH   0xAC
+#define RN5T618_RTC_CTRL1       0xAE
+#define RN5T618_RTC_CTRL2       0xAF
+
 #define RN5T618_PREVINDAC		0xb0
 #define RN5T618_BATDAC			0xb1
 #define RN5T618_CHGCTL1			0xb3
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v7 4/7] mfd: rn5t618: add more subdevices
  2020-03-20  8:10 [PATCH v7 0/7] mfd: rn5t618: Add RTC/ADC support Andreas Kemnade
                   ` (2 preceding siblings ...)
  2020-03-20  8:11 ` [PATCH v7 3/7] mfd: rn5t618: add RTC related registers Andreas Kemnade
@ 2020-03-20  8:11 ` Andreas Kemnade
  2020-03-24 10:57   ` Lee Jones
  2020-03-20  8:11 ` [PATCH v7 5/7] rtc: rc5t619: add Ricoh RC5T619 RTC driver Andreas Kemnade
                   ` (3 subsequent siblings)
  7 siblings, 1 reply; 12+ messages in thread
From: Andreas Kemnade @ 2020-03-20  8:11 UTC (permalink / raw)
  To: lee.jones, robh+dt, mark.rutland, a.zummo, alexandre.belloni,
	devicetree, linux-kernel, linux-rtc, stefan, b.galvani, phh,
	letux-kernel, knaack.h, lars, pmeerw, linux-iio, jic23
  Cc: Andreas Kemnade

Since the RC5T619 has a RTC, use a separate subdevice list for that.
The ADC should be the same as in the RN5T618, according to drivers
in the wild, but since it is not tested, the ADC is only added for
the RC5T619.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
Changes in v6:
- squashed with patch from former ADC patchset

Changes in v3:
- alignment cleanup
 drivers/mfd/rn5t618.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index 7686cc36e8c0..bc117adede4c 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -14,6 +14,7 @@
 #include <linux/mfd/rn5t618.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/regmap.h>
 
@@ -22,6 +23,13 @@ static const struct mfd_cell rn5t618_cells[] = {
 	{ .name = "rn5t618-wdt" },
 };
 
+static const struct mfd_cell rc5t619_cells[] = {
+	{ .name = "rn5t618-adc" },
+	{ .name = "rn5t618-regulator" },
+	{ .name = "rc5t619-rtc" },
+	{ .name = "rn5t618-wdt" },
+};
+
 static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
@@ -167,8 +175,16 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	ret = devm_mfd_add_devices(&i2c->dev, -1, rn5t618_cells,
-				   ARRAY_SIZE(rn5t618_cells), NULL, 0, NULL);
+	if (priv->variant == RC5T619)
+		ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
+					   rc5t619_cells,
+					   ARRAY_SIZE(rc5t619_cells),
+					   NULL, 0, NULL);
+	else
+		ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
+					   rn5t618_cells,
+					   ARRAY_SIZE(rn5t618_cells),
+					   NULL, 0, NULL);
 	if (ret) {
 		dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
 		return ret;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v7 5/7] rtc: rc5t619: add Ricoh RC5T619 RTC driver
  2020-03-20  8:10 [PATCH v7 0/7] mfd: rn5t618: Add RTC/ADC support Andreas Kemnade
                   ` (3 preceding siblings ...)
  2020-03-20  8:11 ` [PATCH v7 4/7] mfd: rn5t618: add more subdevices Andreas Kemnade
@ 2020-03-20  8:11 ` Andreas Kemnade
  2020-03-20  8:11 ` [PATCH v7 6/7] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619 Andreas Kemnade
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 12+ messages in thread
From: Andreas Kemnade @ 2020-03-20  8:11 UTC (permalink / raw)
  To: lee.jones, robh+dt, mark.rutland, a.zummo, alexandre.belloni,
	devicetree, linux-kernel, linux-rtc, stefan, b.galvani, phh,
	letux-kernel, knaack.h, lars, pmeerw, linux-iio, jic23
  Cc: Andreas Kemnade

Add an RTC driver for the RTC device on Ricoh MFD RC5T619,
which is implemented as a variant of RN5T618.

rtc-range output:
Testing 2000-02-28 23:59:59.
OK

Testing 2038-01-19 03:14:07.
OK

Testing 2069-12-31 23:59:59.
OK

Testing 2099-12-31 23:59:59.
KO RTC_RD_TIME returned 22 (line 138)

Testing 2100-02-28 23:59:59.
KO RTC_SET_TIME returned 34 (line 122)

Testing 2106-02-07 06:28:15.
KO RTC_SET_TIME returned 34 (line 122)

Testing 2262-04-11 23:47:16.
KO RTC_SET_TIME returned 34 (line 122)

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
Changes in v3:
- further output cleanup
- remove useless toggling of alarm flag in rtc probe
- alignment cleanup

Changes in v2:
- correct subject line
- reset pon flag not at probe but later
- initialize things only on pon
- 12h handling
- ranges
- style cleanup
- less magic values

 drivers/rtc/Kconfig       |  10 +
 drivers/rtc/Makefile      |   1 +
 drivers/rtc/rtc-rc5t619.c | 444 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 455 insertions(+)
 create mode 100644 drivers/rtc/rtc-rc5t619.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 34c8b6c7e095..72fed8dc55e8 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -591,6 +591,16 @@ config RTC_DRV_RC5T583
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-rc5t583.
 
+config RTC_DRV_RC5T619
+	tristate "RICOH RC5T619 RTC driver"
+	depends on MFD_RN5T618
+	help
+	  If you say yes here you get support for the RTC on the
+	  RICOH RC5T619 chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rc5t619.
+
 config RTC_DRV_S35390A
 	tristate "Seiko Instruments S-35390A"
 	select BITREVERSE
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 4ac8f19fb631..7612912cdf00 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -137,6 +137,7 @@ obj-$(CONFIG_RTC_DRV_PXA)	+= rtc-pxa.o
 obj-$(CONFIG_RTC_DRV_R7301)	+= rtc-r7301.o
 obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701.o
 obj-$(CONFIG_RTC_DRV_RC5T583)	+= rtc-rc5t583.o
+obj-$(CONFIG_RTC_DRV_RC5T619)	+= rtc-rc5t619.o
 obj-$(CONFIG_RTC_DRV_RK808)	+= rtc-rk808.o
 obj-$(CONFIG_RTC_DRV_RP5C01)	+= rtc-rp5c01.o
 obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
diff --git a/drivers/rtc/rtc-rc5t619.c b/drivers/rtc/rtc-rc5t619.c
new file mode 100644
index 000000000000..24e386ecbc7e
--- /dev/null
+++ b/drivers/rtc/rtc-rc5t619.c
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * drivers/rtc/rtc-rc5t619.c
+ *
+ * Real time clock driver for RICOH RC5T619 power management chip.
+ *
+ * Copyright (C) 2019 Andreas Kemnade
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+
+struct rc5t619_rtc {
+	int			irq;
+	struct rtc_device	*rtc;
+	struct rn5t618 *rn5t618;
+};
+
+#define CTRL1_ALARM_ENABLED 0x40
+#define CTRL1_24HR 0x20
+#define CTRL1_PERIODIC_MASK 0xf
+
+#define CTRL2_PON 0x10
+#define CTRL2_ALARM_STATUS 0x80
+#define CTRL2_CTFG 0x4
+#define CTRL2_CTC 0x1
+
+#define MONTH_CENTFLAG 0x80
+#define HOUR_PMFLAG 0x20
+#define MDAY_DAL_EXT 0x80
+
+static uint8_t rtc5t619_12hour_bcd2bin(uint8_t hour)
+{
+	if (hour & HOUR_PMFLAG) {
+		hour = bcd2bin(hour & ~HOUR_PMFLAG);
+		return hour == 12 ? 12 : 12 + hour;
+	}
+
+	hour = bcd2bin(hour);
+	return hour == 12 ? 0 : hour;
+}
+
+static uint8_t rtc5t619_12hour_bin2bcd(uint8_t hour)
+{
+	if (!hour)
+		return 0x12;
+
+	if (hour < 12)
+		return bin2bcd(hour);
+
+	if (hour == 12)
+		return 0x12 | HOUR_PMFLAG;
+
+	return bin2bcd(hour - 12) | HOUR_PMFLAG;
+}
+
+static int rc5t619_rtc_periodic_disable(struct device *dev)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+	int err;
+
+	/* disable function */
+	err = regmap_update_bits(rtc->rn5t618->regmap,
+				 RN5T618_RTC_CTRL1, CTRL1_PERIODIC_MASK, 0);
+	if (err < 0)
+		return err;
+
+	/* clear alarm flag and CTFG */
+	err = regmap_update_bits(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2,
+				 CTRL2_ALARM_STATUS | CTRL2_CTFG | CTRL2_CTC,
+				 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+/* things to be done once after power on */
+static int rc5t619_rtc_pon_setup(struct device *dev)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+	int err;
+	unsigned int reg_data;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &reg_data);
+	if (err < 0)
+		return err;
+
+	/* clear VDET PON */
+	reg_data &= ~(CTRL2_PON | CTRL2_CTC | 0x4a);	/* 0101-1011 */
+	reg_data |= 0x20;	/* 0010-0000 */
+	err = regmap_write(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, reg_data);
+	if (err < 0)
+		return err;
+
+	/* clearing RTC Adjust register */
+	err = regmap_write(rtc->rn5t618->regmap, RN5T618_RTC_ADJUST, 0);
+	if (err)
+		return err;
+
+	return regmap_update_bits(rtc->rn5t618->regmap,
+					RN5T618_RTC_CTRL1,
+					CTRL1_24HR, CTRL1_24HR);
+}
+
+static int rc5t619_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+	u8 buff[7];
+	int err;
+	int cent_flag;
+	unsigned int ctrl1;
+	unsigned int ctrl2;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
+	if (err < 0)
+		return err;
+
+	if (ctrl2 & CTRL2_PON)
+		return -EINVAL;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+	if (err < 0)
+		return err;
+
+	err = regmap_bulk_read(rtc->rn5t618->regmap, RN5T618_RTC_SECONDS,
+			       buff, sizeof(buff));
+	if (err < 0)
+		return err;
+
+	if (buff[5] & MONTH_CENTFLAG)
+		cent_flag = 1;
+	else
+		cent_flag = 0;
+
+	tm->tm_sec  = bcd2bin(buff[0]);
+	tm->tm_min  = bcd2bin(buff[1]);
+
+	if (ctrl1 & CTRL1_24HR)
+		tm->tm_hour = bcd2bin(buff[2]);
+	else
+		tm->tm_hour = rtc5t619_12hour_bcd2bin(buff[2]);
+
+	tm->tm_wday = bcd2bin(buff[3]);
+	tm->tm_mday = bcd2bin(buff[4]);
+	tm->tm_mon  = bcd2bin(buff[5] & 0x1f) - 1; /* back to system 0-11 */
+	tm->tm_year = bcd2bin(buff[6]) + 100 * cent_flag;
+
+	return 0;
+}
+
+static int rc5t619_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+	u8 buff[7];
+	int err;
+	int cent_flag;
+	unsigned int ctrl1;
+	unsigned int ctrl2;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
+	if (err < 0)
+		return err;
+
+	if (ctrl2 & CTRL2_PON)
+		rc5t619_rtc_pon_setup(dev);
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+	if (err < 0)
+		return err;
+
+	if (tm->tm_year >= 100)
+		cent_flag = 1;
+	else
+		cent_flag = 0;
+
+	buff[0] = bin2bcd(tm->tm_sec);
+	buff[1] = bin2bcd(tm->tm_min);
+
+	if (ctrl1 & CTRL1_24HR)
+		buff[2] = bin2bcd(tm->tm_hour);
+	else
+		buff[2] = rtc5t619_12hour_bin2bcd(tm->tm_hour);
+
+	buff[3] = bin2bcd(tm->tm_wday);
+	buff[4] = bin2bcd(tm->tm_mday);
+	buff[5] = bin2bcd(tm->tm_mon + 1);	/* system set 0-11 */
+	buff[6] = bin2bcd(tm->tm_year - cent_flag * 100);
+
+	if (cent_flag)
+		buff[5] |= MONTH_CENTFLAG;
+
+	err = regmap_bulk_write(rtc->rn5t618->regmap, RN5T618_RTC_SECONDS,
+				buff, sizeof(buff));
+	if (err < 0) {
+		dev_err(dev, "failed to program new time: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+/* 0-disable, 1-enable */
+static int rc5t619_rtc_alarm_enable(struct device *dev, unsigned int enabled)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+
+	return regmap_update_bits(rtc->rn5t618->regmap,
+			RN5T618_RTC_CTRL1,
+			CTRL1_ALARM_ENABLED,
+			enabled ? CTRL1_ALARM_ENABLED : 0);
+}
+
+static int rc5t619_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+	u8 buff[6];
+	unsigned int buff_cent;
+	int err;
+	int cent_flag;
+	unsigned int ctrl1;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+	if (err)
+		return err;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_MONTH, &buff_cent);
+	if (err < 0) {
+		dev_err(dev, "failed to read time: %d\n", err);
+		return err;
+	}
+
+	if (buff_cent & MONTH_CENTFLAG)
+		cent_flag = 1;
+	else
+		cent_flag = 0;
+
+	err = regmap_bulk_read(rtc->rn5t618->regmap, RN5T618_RTC_ALARM_Y_SEC,
+			       buff, sizeof(buff));
+	if (err)
+		return err;
+
+	buff[3] = buff[3] & 0x3f;
+
+	alrm->time.tm_sec  = bcd2bin(buff[0]);
+	alrm->time.tm_min  = bcd2bin(buff[1]);
+
+	if (ctrl1 & CTRL1_24HR)
+		alrm->time.tm_hour = bcd2bin(buff[2]);
+	else
+		alrm->time.tm_hour = rtc5t619_12hour_bcd2bin(buff[2]);
+
+	alrm->time.tm_mday = bcd2bin(buff[3]);
+	alrm->time.tm_mon  = bcd2bin(buff[4]) - 1;
+	alrm->time.tm_year = bcd2bin(buff[5]) + 100 * cent_flag;
+	alrm->enabled = !!(ctrl1 & CTRL1_ALARM_ENABLED);
+	dev_dbg(dev, "read alarm: %ptR\n", &alrm->time);
+
+	return 0;
+}
+
+static int rc5t619_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+	u8 buff[6];
+	int err;
+	int cent_flag;
+	unsigned int ctrl1;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+	if (err)
+		return err;
+
+	err = rc5t619_rtc_alarm_enable(dev, 0);
+	if (err < 0)
+		return err;
+
+	if (rtc->irq == -1)
+		return -EINVAL;
+
+	if (alrm->enabled == 0)
+		return 0;
+
+	if (alrm->time.tm_year >= 100)
+		cent_flag = 1;
+	else
+		cent_flag = 0;
+
+	alrm->time.tm_mon += 1;
+	buff[0] = bin2bcd(alrm->time.tm_sec);
+	buff[1] = bin2bcd(alrm->time.tm_min);
+
+	if (ctrl1 & CTRL1_24HR)
+		buff[2] = bin2bcd(alrm->time.tm_hour);
+	else
+		buff[2] = rtc5t619_12hour_bin2bcd(alrm->time.tm_hour);
+
+	buff[3] = bin2bcd(alrm->time.tm_mday);
+	buff[4] = bin2bcd(alrm->time.tm_mon);
+	buff[5] = bin2bcd(alrm->time.tm_year - 100 * cent_flag);
+	buff[3] |= MDAY_DAL_EXT;
+
+	err = regmap_bulk_write(rtc->rn5t618->regmap, RN5T618_RTC_ALARM_Y_SEC,
+				buff, sizeof(buff));
+	if (err < 0)
+		return err;
+
+	return rc5t619_rtc_alarm_enable(dev, alrm->enabled);
+}
+
+static const struct rtc_class_ops rc5t619_rtc_ops = {
+	.read_time	= rc5t619_rtc_read_time,
+	.set_time	= rc5t619_rtc_set_time,
+	.set_alarm	= rc5t619_rtc_set_alarm,
+	.read_alarm	= rc5t619_rtc_read_alarm,
+	.alarm_irq_enable = rc5t619_rtc_alarm_enable,
+};
+
+static int rc5t619_rtc_alarm_flag_clr(struct device *dev)
+{
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+
+	/* clear alarm-D status bits.*/
+	return regmap_update_bits(rtc->rn5t618->regmap,
+				RN5T618_RTC_CTRL2,
+				CTRL2_ALARM_STATUS | CTRL2_CTC, 0);
+}
+
+static irqreturn_t rc5t619_rtc_irq(int irq, void *data)
+{
+	struct device *dev = data;
+	struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+
+	rc5t619_rtc_alarm_flag_clr(dev);
+
+	rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
+	return IRQ_HANDLED;
+}
+
+static int rc5t619_rtc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
+	struct rc5t619_rtc *rtc;
+	unsigned int ctrl2;
+	int err;
+
+	rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
+	if (IS_ERR(rtc)) {
+		err = PTR_ERR(rtc);
+		return -ENOMEM;
+	}
+
+	rtc->rn5t618 = rn5t618;
+
+	dev_set_drvdata(dev, rtc);
+	rtc->irq = -1;
+
+	if (rn5t618->irq_data)
+		rtc->irq = regmap_irq_get_virq(rn5t618->irq_data,
+					       RN5T618_IRQ_RTC);
+
+	if (rtc->irq  < 0)
+		rtc->irq = -1;
+
+	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
+	if (err < 0)
+		return err;
+
+	/* disable rtc periodic function */
+	err = rc5t619_rtc_periodic_disable(&pdev->dev);
+	if (err)
+		return err;
+
+	if (ctrl2 & CTRL2_PON) {
+		err = rc5t619_rtc_alarm_flag_clr(&pdev->dev);
+		if (err)
+			return err;
+	}
+
+	rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc->rtc)) {
+		err = PTR_ERR(rtc->rtc);
+		dev_err(dev, "RTC device register: err %d\n", err);
+		return err;
+	}
+
+	rtc->rtc->ops = &rc5t619_rtc_ops;
+	rtc->rtc->range_min = RTC_TIMESTAMP_BEGIN_1900;
+	rtc->rtc->range_max = RTC_TIMESTAMP_END_2099;
+
+	/* set interrupt and enable it */
+	if (rtc->irq != -1) {
+		err = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
+						rc5t619_rtc_irq,
+						IRQF_ONESHOT,
+						"rtc-rc5t619",
+						&pdev->dev);
+		if (err < 0) {
+			dev_err(&pdev->dev, "request IRQ:%d fail\n", rtc->irq);
+			rtc->irq = -1;
+
+			err = rc5t619_rtc_alarm_enable(&pdev->dev, 0);
+			if (err)
+				return err;
+
+		} else {
+			/* enable wake */
+			device_init_wakeup(&pdev->dev, 1);
+			enable_irq_wake(rtc->irq);
+		}
+	} else {
+		/* system don't want to using alarm interrupt, so close it */
+		err = rc5t619_rtc_alarm_enable(&pdev->dev, 0);
+		if (err)
+			return err;
+
+		dev_warn(&pdev->dev, "rc5t619 interrupt is disabled\n");
+	}
+
+	return rtc_register_device(rtc->rtc);
+}
+
+static struct platform_driver rc5t619_rtc_driver = {
+	.driver	= {
+		.name	= "rc5t619-rtc",
+	},
+	.probe	= rc5t619_rtc_probe,
+};
+
+module_platform_driver(rc5t619_rtc_driver);
+MODULE_ALIAS("platform:rc5t619-rtc");
+MODULE_DESCRIPTION("RICOH RC5T619 RTC driver");
+MODULE_LICENSE("GPL");
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v7 6/7] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  2020-03-20  8:10 [PATCH v7 0/7] mfd: rn5t618: Add RTC/ADC support Andreas Kemnade
                   ` (4 preceding siblings ...)
  2020-03-20  8:11 ` [PATCH v7 5/7] rtc: rc5t619: add Ricoh RC5T619 RTC driver Andreas Kemnade
@ 2020-03-20  8:11 ` Andreas Kemnade
  2020-03-20  8:11 ` [PATCH v7 7/7] mfd: rn5t618: cleanup i2c_device_id Andreas Kemnade
  2020-03-27 10:40 ` [GIT PULL] Immutable branch between MFD, IIO and RTC due for the v5.7 merge window Lee Jones
  7 siblings, 0 replies; 12+ messages in thread
From: Andreas Kemnade @ 2020-03-20  8:11 UTC (permalink / raw)
  To: lee.jones, robh+dt, mark.rutland, a.zummo, alexandre.belloni,
	devicetree, linux-kernel, linux-rtc, stefan, b.galvani, phh,
	letux-kernel, knaack.h, lars, pmeerw, linux-iio, jic23
  Cc: Andreas Kemnade, Jonathan Cameron

Both chips have an A/D converter capable of measuring
things like VBAT, VUSB and analog inputs.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
- was in a separate patchset

Changes in v4:
- merged ret = and return into one line
- added Reviewed-by:

Changes in v3:
- output scale instead of processed
- prefixed symbols with RN5T618

Changes in v2:
- enum for channels
- bulk read instead of single byte read for conversion
  result
- fix get_virq error handling
- use devm for registering device and requesting IRQ

 drivers/iio/adc/Kconfig       |  10 ++
 drivers/iio/adc/Makefile      |   1 +
 drivers/iio/adc/rn5t618-adc.c | 256 ++++++++++++++++++++++++++++++++++
 3 files changed, 267 insertions(+)
 create mode 100644 drivers/iio/adc/rn5t618-adc.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 82e33082958c..300904b93656 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -783,6 +783,16 @@ config RCAR_GYRO_ADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called rcar-gyroadc.
 
+config RN5T618_ADC
+	tristate "ADC for the RN5T618/RC5T619 family of chips"
+	depends on MFD_RN5T618
+	help
+	  Say yes here to build support for the integrated ADC inside the
+	  RN5T618/619 series PMICs:
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rn5t618-adc.
+
 config ROCKCHIP_SARADC
 	tristate "Rockchip SARADC driver"
 	depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 919228900df9..b182d234f45a 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_QCOM_VADC_COMMON) += qcom-vadc-common.o
 obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
 obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o
 obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o
+obj-$(CONFIG_RN5T618_ADC) += rn5t618-adc.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
 obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
diff --git a/drivers/iio/adc/rn5t618-adc.c b/drivers/iio/adc/rn5t618-adc.c
new file mode 100644
index 000000000000..f21027e4e26a
--- /dev/null
+++ b/drivers/iio/adc/rn5t618-adc.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADC driver for the RICOH RN5T618 power management chip family
+ *
+ * Copyright (C) 2019 Andreas Kemnade
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/slab.h>
+
+#define RN5T618_ADC_CONVERSION_TIMEOUT   (msecs_to_jiffies(500))
+#define RN5T618_REFERENCE_VOLT 2500
+
+/* mask for selecting channels for single conversion */
+#define RN5T618_ADCCNT3_CHANNEL_MASK 0x7
+/* average 4-time conversion mode */
+#define RN5T618_ADCCNT3_AVG BIT(3)
+/* set for starting a single conversion, gets cleared by hw when done */
+#define RN5T618_ADCCNT3_GODONE BIT(4)
+/* automatic conversion, period is in ADCCNT2, selected channels are
+ * in ADCCNT1
+ */
+#define RN5T618_ADCCNT3_AUTO BIT(5)
+#define RN5T618_ADCEND_IRQ BIT(0)
+
+struct rn5t618_adc_data {
+	struct device *dev;
+	struct rn5t618 *rn5t618;
+	struct completion conv_completion;
+	int irq;
+};
+
+struct rn5t618_channel_ratios {
+	u16 numerator;
+	u16 denominator;
+};
+
+enum rn5t618_channels {
+	LIMMON = 0,
+	VBAT,
+	VADP,
+	VUSB,
+	VSYS,
+	VTHM,
+	AIN1,
+	AIN0
+};
+
+static const struct rn5t618_channel_ratios rn5t618_ratios[8] = {
+	[LIMMON] = {50, 32}, /* measured across 20mOhm, amplified by 32 */
+	[VBAT] = {2, 1},
+	[VADP] = {3, 1},
+	[VUSB] = {3, 1},
+	[VSYS] = {3, 1},
+	[VTHM] = {1, 1},
+	[AIN1] = {1, 1},
+	[AIN0] = {1, 1},
+};
+
+static int rn5t618_read_adc_reg(struct rn5t618 *rn5t618, int reg, u16 *val)
+{
+	u8 data[2];
+	int ret;
+
+	ret = regmap_bulk_read(rn5t618->regmap, reg, data, sizeof(data));
+	if (ret < 0)
+		return ret;
+
+	*val = (data[0] << 4) | (data[1] & 0xF);
+
+	return 0;
+}
+
+static irqreturn_t rn5t618_adc_irq(int irq, void *data)
+{
+	struct rn5t618_adc_data *adc = data;
+	unsigned int r = 0;
+	int ret;
+
+	/* clear low & high threshold irqs */
+	regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC1, 0);
+	regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC2, 0);
+
+	ret = regmap_read(adc->rn5t618->regmap, RN5T618_IR_ADC3, &r);
+	if (ret < 0)
+		dev_err(adc->dev, "failed to read IRQ status: %d\n", ret);
+
+	regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC3, 0);
+
+	if (r & RN5T618_ADCEND_IRQ)
+		complete(&adc->conv_completion);
+
+	return IRQ_HANDLED;
+}
+
+static int rn5t618_adc_read(struct iio_dev *iio_dev,
+			    const struct iio_chan_spec *chan,
+			    int *val, int *val2, long mask)
+{
+	struct rn5t618_adc_data *adc = iio_priv(iio_dev);
+	u16 raw;
+	int ret;
+
+	if (mask == IIO_CHAN_INFO_SCALE) {
+		*val = RN5T618_REFERENCE_VOLT *
+		       rn5t618_ratios[chan->channel].numerator;
+		*val2 = rn5t618_ratios[chan->channel].denominator * 4095;
+
+		return IIO_VAL_FRACTIONAL;
+	}
+
+	/* select channel */
+	ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
+				 RN5T618_ADCCNT3_CHANNEL_MASK,
+				 chan->channel);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(adc->rn5t618->regmap, RN5T618_EN_ADCIR3,
+			   RN5T618_ADCEND_IRQ);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
+				 RN5T618_ADCCNT3_AVG,
+				 mask == IIO_CHAN_INFO_AVERAGE_RAW ?
+				 RN5T618_ADCCNT3_AVG : 0);
+	if (ret < 0)
+		return ret;
+
+	init_completion(&adc->conv_completion);
+	/* single conversion */
+	ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
+				 RN5T618_ADCCNT3_GODONE,
+				 RN5T618_ADCCNT3_GODONE);
+	if (ret < 0)
+		return ret;
+
+	ret = wait_for_completion_timeout(&adc->conv_completion,
+					  RN5T618_ADC_CONVERSION_TIMEOUT);
+	if (ret == 0) {
+		dev_warn(adc->dev, "timeout waiting for adc result\n");
+		return -ETIMEDOUT;
+	}
+
+	ret = rn5t618_read_adc_reg(adc->rn5t618,
+				   RN5T618_ILIMDATAH + 2 * chan->channel,
+				   &raw);
+	if (ret < 0)
+		return ret;
+
+	*val = raw;
+
+	return IIO_VAL_INT;
+}
+
+static const struct iio_info rn5t618_adc_iio_info = {
+	.read_raw = &rn5t618_adc_read,
+};
+
+#define RN5T618_ADC_CHANNEL(_channel, _type, _name) { \
+	.type = _type, \
+	.channel = _channel, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			      BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \
+			      BIT(IIO_CHAN_INFO_SCALE), \
+	.datasheet_name = _name, \
+	.indexed = 1. \
+}
+
+static const struct iio_chan_spec rn5t618_adc_iio_channels[] = {
+	RN5T618_ADC_CHANNEL(LIMMON, IIO_CURRENT, "LIMMON"),
+	RN5T618_ADC_CHANNEL(VBAT, IIO_VOLTAGE, "VBAT"),
+	RN5T618_ADC_CHANNEL(VADP, IIO_VOLTAGE, "VADP"),
+	RN5T618_ADC_CHANNEL(VUSB, IIO_VOLTAGE, "VUSB"),
+	RN5T618_ADC_CHANNEL(VSYS, IIO_VOLTAGE, "VSYS"),
+	RN5T618_ADC_CHANNEL(VTHM, IIO_VOLTAGE, "VTHM"),
+	RN5T618_ADC_CHANNEL(AIN1, IIO_VOLTAGE, "AIN1"),
+	RN5T618_ADC_CHANNEL(AIN0, IIO_VOLTAGE, "AIN0")
+};
+
+static int rn5t618_adc_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct iio_dev *iio_dev;
+	struct rn5t618_adc_data *adc;
+	struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
+
+	iio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
+	if (!iio_dev) {
+		dev_err(&pdev->dev, "failed allocating iio device\n");
+		return -ENOMEM;
+	}
+
+	adc = iio_priv(iio_dev);
+	adc->dev = &pdev->dev;
+	adc->rn5t618 = rn5t618;
+
+	if (rn5t618->irq_data)
+		adc->irq = regmap_irq_get_virq(rn5t618->irq_data,
+					       RN5T618_IRQ_ADC);
+
+	if (adc->irq <= 0) {
+		dev_err(&pdev->dev, "get virq failed\n");
+		return -EINVAL;
+	}
+
+	init_completion(&adc->conv_completion);
+
+	iio_dev->name = dev_name(&pdev->dev);
+	iio_dev->dev.parent = &pdev->dev;
+	iio_dev->info = &rn5t618_adc_iio_info;
+	iio_dev->modes = INDIO_DIRECT_MODE;
+	iio_dev->channels = rn5t618_adc_iio_channels;
+	iio_dev->num_channels = ARRAY_SIZE(rn5t618_adc_iio_channels);
+
+	/* stop any auto-conversion */
+	ret = regmap_write(rn5t618->regmap, RN5T618_ADCCNT3, 0);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, iio_dev);
+
+	ret = devm_request_threaded_irq(adc->dev, adc->irq, NULL,
+					rn5t618_adc_irq,
+					IRQF_ONESHOT, dev_name(adc->dev),
+					adc);
+	if (ret < 0) {
+		dev_err(adc->dev, "request irq %d failed: %d\n", adc->irq, ret);
+		return ret;
+	}
+
+	return devm_iio_device_register(adc->dev, iio_dev);
+}
+
+static struct platform_driver rn5t618_adc_driver = {
+	.driver = {
+		.name   = "rn5t618-adc",
+	},
+	.probe = rn5t618_adc_probe,
+};
+
+module_platform_driver(rn5t618_adc_driver);
+MODULE_ALIAS("platform:rn5t618-adc");
+MODULE_DESCRIPTION("RICOH RN5T618 ADC driver");
+MODULE_LICENSE("GPL");
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v7 7/7] mfd: rn5t618: cleanup i2c_device_id
  2020-03-20  8:10 [PATCH v7 0/7] mfd: rn5t618: Add RTC/ADC support Andreas Kemnade
                   ` (5 preceding siblings ...)
  2020-03-20  8:11 ` [PATCH v7 6/7] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619 Andreas Kemnade
@ 2020-03-20  8:11 ` Andreas Kemnade
  2020-03-24 10:58   ` Lee Jones
  2020-03-27 10:40 ` [GIT PULL] Immutable branch between MFD, IIO and RTC due for the v5.7 merge window Lee Jones
  7 siblings, 1 reply; 12+ messages in thread
From: Andreas Kemnade @ 2020-03-20  8:11 UTC (permalink / raw)
  To: lee.jones, robh+dt, mark.rutland, a.zummo, alexandre.belloni,
	devicetree, linux-kernel, linux-rtc, stefan, b.galvani, phh,
	letux-kernel, knaack.h, lars, pmeerw, linux-iio, jic23
  Cc: Andreas Kemnade

That list was just empty, so it can be removed if .probe_new
instead of .probe is used

Suggested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
Functional independent from the other patches, but since they are
touching similar areas, commit/merge conflicts would occur.
 drivers/mfd/rn5t618.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index bc117adede4c..232de50562f9 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -146,8 +146,7 @@ static const struct of_device_id rn5t618_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, rn5t618_of_match);
 
-static int rn5t618_i2c_probe(struct i2c_client *i2c,
-			     const struct i2c_device_id *id)
+static int rn5t618_i2c_probe(struct i2c_client *i2c)
 {
 	const struct of_device_id *of_id;
 	struct rn5t618 *priv;
@@ -244,11 +243,6 @@ static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
 	return 0;
 }
 
-static const struct i2c_device_id rn5t618_i2c_id[] = {
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, rn5t618_i2c_id);
-
 static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
 			rn5t618_i2c_suspend,
 			rn5t618_i2c_resume);
@@ -259,9 +253,8 @@ static struct i2c_driver rn5t618_i2c_driver = {
 		.of_match_table = of_match_ptr(rn5t618_of_match),
 		.pm = &rn5t618_i2c_dev_pm_ops,
 	},
-	.probe = rn5t618_i2c_probe,
+	.probe_new = rn5t618_i2c_probe,
 	.remove = rn5t618_i2c_remove,
-	.id_table = rn5t618_i2c_id,
 };
 
 module_i2c_driver(rn5t618_i2c_driver);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v7 2/7] mfd: rn5t618: add IRQ support
  2020-03-20  8:11 ` [PATCH v7 2/7] mfd: rn5t618: add IRQ support Andreas Kemnade
@ 2020-03-24 10:33   ` Lee Jones
  0 siblings, 0 replies; 12+ messages in thread
From: Lee Jones @ 2020-03-24 10:33 UTC (permalink / raw)
  To: Andreas Kemnade
  Cc: robh+dt, mark.rutland, a.zummo, alexandre.belloni, devicetree,
	linux-kernel, linux-rtc, stefan, b.galvani, phh, letux-kernel,
	knaack.h, lars, pmeerw, linux-iio, jic23

On Fri, 20 Mar 2020, Andreas Kemnade wrote:

> This adds support for IRQ handling in the RC5T619 which is required
> for properly implementing subdevices like RTC.
> For now only definitions for the variant RC5T619 are included.
> 
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> ---
> Changes in v7:
> more cleanups in IRQ init
> 
> Changes in v5:
> rn5t618_irq_init static
> 
> Changes in v4:
> merge rn5t618-irq.c into rn5t618.c
> use macros for IRQ table
> 
> Changes in v3:
> alignment cleanup
> 
> Changes in v2:
> - no dead code, did some more testing and thinking for that
> - remove extra empty lines
>  drivers/mfd/Kconfig         |  1 +
>  drivers/mfd/rn5t618.c       | 78 ++++++++++++++++++++++++++++++++++++-
>  include/linux/mfd/rn5t618.h | 15 +++++++
>  3 files changed, 93 insertions(+), 1 deletion(-)

Looks good to me now:

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v7 4/7] mfd: rn5t618: add more subdevices
  2020-03-20  8:11 ` [PATCH v7 4/7] mfd: rn5t618: add more subdevices Andreas Kemnade
@ 2020-03-24 10:57   ` Lee Jones
  0 siblings, 0 replies; 12+ messages in thread
From: Lee Jones @ 2020-03-24 10:57 UTC (permalink / raw)
  To: Andreas Kemnade
  Cc: robh+dt, mark.rutland, a.zummo, alexandre.belloni, devicetree,
	linux-kernel, linux-rtc, stefan, b.galvani, phh, letux-kernel,
	knaack.h, lars, pmeerw, linux-iio, jic23

On Fri, 20 Mar 2020, Andreas Kemnade wrote:

> Since the RC5T619 has a RTC, use a separate subdevice list for that.
> The ADC should be the same as in the RN5T618, according to drivers
> in the wild, but since it is not tested, the ADC is only added for
> the RC5T619.
> 
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> ---
> Changes in v6:
> - squashed with patch from former ADC patchset
> 
> Changes in v3:
> - alignment cleanup
>  drivers/mfd/rn5t618.c | 20 ++++++++++++++++++--
>  1 file changed, 18 insertions(+), 2 deletions(-)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v7 7/7] mfd: rn5t618: cleanup i2c_device_id
  2020-03-20  8:11 ` [PATCH v7 7/7] mfd: rn5t618: cleanup i2c_device_id Andreas Kemnade
@ 2020-03-24 10:58   ` Lee Jones
  0 siblings, 0 replies; 12+ messages in thread
From: Lee Jones @ 2020-03-24 10:58 UTC (permalink / raw)
  To: Andreas Kemnade
  Cc: robh+dt, mark.rutland, a.zummo, alexandre.belloni, devicetree,
	linux-kernel, linux-rtc, stefan, b.galvani, phh, letux-kernel,
	knaack.h, lars, pmeerw, linux-iio, jic23

On Fri, 20 Mar 2020, Andreas Kemnade wrote:

> That list was just empty, so it can be removed if .probe_new
> instead of .probe is used
> 
> Suggested-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> ---
> Functional independent from the other patches, but since they are
> touching similar areas, commit/merge conflicts would occur.
>  drivers/mfd/rn5t618.c | 11 ++---------
>  1 file changed, 2 insertions(+), 9 deletions(-)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [GIT PULL] Immutable branch between MFD, IIO and RTC due for the v5.7 merge window
  2020-03-20  8:10 [PATCH v7 0/7] mfd: rn5t618: Add RTC/ADC support Andreas Kemnade
                   ` (6 preceding siblings ...)
  2020-03-20  8:11 ` [PATCH v7 7/7] mfd: rn5t618: cleanup i2c_device_id Andreas Kemnade
@ 2020-03-27 10:40 ` Lee Jones
  7 siblings, 0 replies; 12+ messages in thread
From: Lee Jones @ 2020-03-27 10:40 UTC (permalink / raw)
  To: Andreas Kemnade
  Cc: robh+dt, mark.rutland, a.zummo, alexandre.belloni, devicetree,
	linux-kernel, linux-rtc, stefan, b.galvani, phh, letux-kernel,
	knaack.h, lars, pmeerw, linux-iio, jic23

Enjoy!

The following changes since commit bb6d3fb354c5ee8d6bde2d576eb7220ea09862b9:

  Linux 5.6-rc1 (2020-02-09 16:08:48 -0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-iio-rtc-5.7

for you to fetch changes up to 7858658cdcab7ca8057444b1d24c6a28ddaa8589:

  mfd: rn5t618: Cleanup i2c_device_id (2020-03-27 09:42:44 +0000)

----------------------------------------------------------------
Andreas Kemnade (7):
      dt-bindings: mfd: rn5t618: Document optional property interrupts
      mfd: rn5t618: Add IRQ support
      mfd: rn5t618: Add RTC related registers
      mfd: rn5t618: Add more subdevices
      rtc: rc5t619: Add Ricoh RC5T619 RTC driver
      iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
      mfd: rn5t618: Cleanup i2c_device_id

 Documentation/devicetree/bindings/mfd/rn5t618.txt |   4 +
 drivers/iio/adc/Kconfig                           |  10 +
 drivers/iio/adc/Makefile                          |   1 +
 drivers/iio/adc/rn5t618-adc.c                     | 256 +++++++++++++
 drivers/mfd/Kconfig                               |   1 +
 drivers/mfd/rn5t618.c                             | 109 +++++-
 drivers/rtc/Kconfig                               |  10 +
 drivers/rtc/Makefile                              |   1 +
 drivers/rtc/rtc-rc5t619.c                         | 444 ++++++++++++++++++++++
 include/linux/mfd/rn5t618.h                       |  26 ++
 10 files changed, 851 insertions(+), 11 deletions(-)
 create mode 100644 drivers/iio/adc/rn5t618-adc.c
 create mode 100644 drivers/rtc/rtc-rc5t619.c

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-20  8:10 [PATCH v7 0/7] mfd: rn5t618: Add RTC/ADC support Andreas Kemnade
2020-03-20  8:10 ` [PATCH v7 1/7] dt-bindings: mfd: rn5t618: Document optional property interrupts Andreas Kemnade
2020-03-20  8:11 ` [PATCH v7 2/7] mfd: rn5t618: add IRQ support Andreas Kemnade
2020-03-24 10:33   ` Lee Jones
2020-03-20  8:11 ` [PATCH v7 3/7] mfd: rn5t618: add RTC related registers Andreas Kemnade
2020-03-20  8:11 ` [PATCH v7 4/7] mfd: rn5t618: add more subdevices Andreas Kemnade
2020-03-24 10:57   ` Lee Jones
2020-03-20  8:11 ` [PATCH v7 5/7] rtc: rc5t619: add Ricoh RC5T619 RTC driver Andreas Kemnade
2020-03-20  8:11 ` [PATCH v7 6/7] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619 Andreas Kemnade
2020-03-20  8:11 ` [PATCH v7 7/7] mfd: rn5t618: cleanup i2c_device_id Andreas Kemnade
2020-03-24 10:58   ` Lee Jones
2020-03-27 10:40 ` [GIT PULL] Immutable branch between MFD, IIO and RTC due for the v5.7 merge window Lee Jones

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git