Hi,

On Tue, Apr 14, 2020 at 12:05:15PM +0300, Andy Shevchenko wrote:
> On Mon, Apr 13, 2020 at 11:48 PM Sebastian Reichel
> <sebastian.reichel@collabora.com> wrote:
> > On Mon, Apr 13, 2020 at 10:28:19PM +0200, saravanan sekar wrote:
> > > On 13/04/20 10:10 pm, Andy Shevchenko wrote:
> > > > On Mon, Apr 13, 2020 at 8:37 PM Saravanan Sekar <sravanhome@gmail.com> wrote:
> 
> ...
> 
> > > > > +       irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
> > > > Why not to use temporary variable dev?
> > > >
> > > > This should be platform_get_irq_optional().
> > >
> > > Platform_get_irq in turn calls platform_get_irq_optional. It was suggested
> > > by Lee and is it mandatory to change it?
> >
> > platform_get_irq is fine.
> 
> I don't think so. It will spill an error in case there is no IRQ or
> error happened.

I suppose even for an optional IRQ we want an error message when an
error happens (i.e. IRQ is specified, but not used because $reason).

> So, either is should be _optional, or below conditional simply wrong, should be
>   if (irq < 0)
>     return irq;

In other words: Making the irq mandatory. Sounds reasonable to me
considering the driver code. Without IRQ userspace needs to poll to
know about error states like thermal shutdown.

-- Sebastian
> 
> > > > > +       if (irq) {
> >
> > But this must be
> >
> > if (irq > 0)
> >
> > or you will also try to continue with error codes.
> >
> > > > > +               ret = devm_request_irq(dev, irq, mp2629_irq_handler,
> > > > > +                                IRQF_TRIGGER_RISING, "mp2629-charger",
> > > > > +                                charger);
> > > > > +               if (ret) {
> > > > > +                       dev_err(dev, "failed to request gpio IRQ\n");
> > > > > +                       goto iio_fail;
> > > > > +               }
> > > > > +       }
> > > > > +}
> 
> -- 
> With Best Regards,
> Andy Shevchenko