linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v13 0/2] iio: proximity: driver for vcnl3020
@ 2020-05-07 13:25 Ivan Mikhaylov
  2020-05-07 13:25 ` [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document Ivan Mikhaylov
  2020-05-07 13:26 ` [PATCH v13 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor Ivan Mikhaylov
  0 siblings, 2 replies; 6+ messages in thread
From: Ivan Mikhaylov @ 2020-05-07 13:25 UTC (permalink / raw)
  Cc: Ivan Mikhaylov, Jonathan Cameron, Hartmut Knaack,
	Lars-Peter Clausen, Peter Meerwald-Stadler, linux-iio,
	linux-kernel, devicetree, Mark Rutland, Rob Herring,
	Andy Shevchenko

Add proximity sensor driver for Vishay vcnl3020. Only on-demand
measurement is supported for now.

Changes from v12:
   1. forgot to change path inside yaml.

Changes from v11:
   1. minor changes to yaml.

Changes from v10:
   1. add vcnl3020_property struct for optional properties.

Changes from v9:
   1. minor changes.
   2. pass microamps from dts, not register value.

Changes from v8:
   1. add vcnl3020 prefix into get_and_apply_property function.
   2. add bsd license into yaml.
   3. vishay,led-current-milliamp -> vishay,led-current-microamp.
   4. add default value into vishay,led-current-microamp and change
      register values into microamps.

Changes from v7:
   1. forgot to add Reviewed-by tag.

Changes from v6:
   1. minor changes
     1.1 remove VCNL_DRV_NAME
     1.2 add braces in get_and_apply_property

Changes from v5:
   1. add get_and_apply_property function for optional parameters.
   2. minor changes.

Changes from v4:
   1. add vdd-supply,vddio-supply,interrupts properties into yaml.
   2. led-current -> vishay,led-current-milliamp in yaml.
   3. add possible values enum list.
   4. add bulk_read for result hi/lo registers.
   5. add description of vcnl3020_data structure.
   6. vcnl3020 id table is removed.
   7. make "vishay,led-current-milliamp" optional in yaml and code.

Changes from v3:
   1. minor changes.
   2. add i2c block to fix dts section in yaml.

Changes from v2:
   1. using regmap_read_poll_timeout instead of do-while in measurement
      function.
   2. change struct i2client* in vcnl3020_data to struct dev*
   3. enable REGMAP_I2C in Kconfig

Changes from v1:
   1. using regmap interface instead of i2c_smbus_* calls.
   2. switch from probe to probe_new.
   3. s32/int32_t -> int

Ivan Mikhaylov (2):
  dt-bindings: proximity: provide vcnl3020 device tree binding document
  iio: proximity: Add driver support for vcnl3020 proximity sensor

 .../iio/proximity/vishay,vcnl3020.yaml        |  65 +++++
 drivers/iio/proximity/Kconfig                 |  11 +
 drivers/iio/proximity/Makefile                |   1 +
 drivers/iio/proximity/vcnl3020.c              | 258 ++++++++++++++++++
 4 files changed, 335 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
 create mode 100644 drivers/iio/proximity/vcnl3020.c

-- 
2.21.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document
  2020-05-07 13:25 [PATCH v13 0/2] iio: proximity: driver for vcnl3020 Ivan Mikhaylov
@ 2020-05-07 13:25 ` Ivan Mikhaylov
  2020-05-08 14:51   ` Jonathan Cameron
  2020-05-07 13:26 ` [PATCH v13 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor Ivan Mikhaylov
  1 sibling, 1 reply; 6+ messages in thread
From: Ivan Mikhaylov @ 2020-05-07 13:25 UTC (permalink / raw)
  Cc: Ivan Mikhaylov, Jonathan Cameron, Hartmut Knaack,
	Lars-Peter Clausen, Peter Meerwald-Stadler, linux-iio,
	linux-kernel, devicetree, Mark Rutland, Rob Herring,
	Andy Shevchenko

Mostly standard i2c driver with some additional led-current option
for vcnl3020.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
---
 .../iio/proximity/vishay,vcnl3020.yaml        | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml

diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
new file mode 100644
index 000000000000..408dee17cdf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/vishay,vcnl3020.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Integrated Proximity Sensor With Infrared Emitter
+
+maintainers:
+  - Ivan Mikhaylov <i.mikhaylov@yadro.com>
+
+description: |
+  The VCNL3020 is a fully integrated proximity sensor. Fully integrated means
+  that the infrared emitter is included in the package. It has 16-bit
+  resolution. It includes a signal processing IC and features standard I2C
+  communication interface. It features an interrupt function.
+
+  Specifications about the devices can be found at:
+  https://www.vishay.com/docs/84150/vcnl3020.pdf
+
+properties:
+  compatible:
+    enum:
+      - vishay,vcnl3020
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+  vishay,led-current-microamp:
+    description:
+      IR LED current value with valid Range = 0 to 20d. e.g. 0 = 0 mA,
+      1 = 10 mA, 20 = 200 mA. LED Current is limited to 200 mA for values
+      higher than decimal 20. The drive current for the LED used in proximity
+      sensing.
+    enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000,
+          100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
+          180000, 190000, 200000]
+    default: 20000
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@13 {
+              compatible = "vishay,vcnl3020";
+              reg = <0x13>;
+              vishay,led-current-microamp = <200000>;
+        };
+    };
-- 
2.21.1


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v13 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor
  2020-05-07 13:25 [PATCH v13 0/2] iio: proximity: driver for vcnl3020 Ivan Mikhaylov
  2020-05-07 13:25 ` [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document Ivan Mikhaylov
@ 2020-05-07 13:26 ` Ivan Mikhaylov
  1 sibling, 0 replies; 6+ messages in thread
From: Ivan Mikhaylov @ 2020-05-07 13:26 UTC (permalink / raw)
  Cc: Ivan Mikhaylov, Jonathan Cameron, Hartmut Knaack,
	Lars-Peter Clausen, Peter Meerwald-Stadler, linux-iio,
	linux-kernel, devicetree, Mark Rutland, Rob Herring,
	Andy Shevchenko

Proximity sensor driver based on light/vcnl4000.c code.
For now supports only the single on-demand measurement.

The VCNL3020 is a fully integrated proximity sensor. Fully
integrated means that the infrared emitter is included in the
package. It has 16-bit resolution. It includes a signal
processing IC and features standard I2C communication
interface. It features an interrupt function.

Datasheet: http://www.vishay.com/docs/84150/vcnl3020.pdf
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/iio/proximity/Kconfig    |  11 ++
 drivers/iio/proximity/Makefile   |   1 +
 drivers/iio/proximity/vcnl3020.c | 258 +++++++++++++++++++++++++++++++
 3 files changed, 270 insertions(+)
 create mode 100644 drivers/iio/proximity/vcnl3020.c

diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
index d53601447da4..b8d2b17e60ac 100644
--- a/drivers/iio/proximity/Kconfig
+++ b/drivers/iio/proximity/Kconfig
@@ -112,6 +112,17 @@ config SRF08
 	  To compile this driver as a module, choose M here: the
 	  module will be called srf08.
 
+config VCNL3020
+	tristate "VCNL3020 proximity sensor"
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the Vishay VCNL3020
+	  proximity sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vcnl3020.
+
 config VL53L0X_I2C
 	tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)"
 	depends on I2C
diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
index 0bb5f9de13d6..8245978ced30 100644
--- a/drivers/iio/proximity/Makefile
+++ b/drivers/iio/proximity/Makefile
@@ -12,5 +12,6 @@ obj-$(CONFIG_RFD77402)		+= rfd77402.o
 obj-$(CONFIG_SRF04)		+= srf04.o
 obj-$(CONFIG_SRF08)		+= srf08.o
 obj-$(CONFIG_SX9500)		+= sx9500.o
+obj-$(CONFIG_VCNL3020)		+= vcnl3020.o
 obj-$(CONFIG_VL53L0X_I2C)	+= vl53l0x-i2c.o
 
diff --git a/drivers/iio/proximity/vcnl3020.c b/drivers/iio/proximity/vcnl3020.c
new file mode 100644
index 000000000000..9ff1a164c2e6
--- /dev/null
+++ b/drivers/iio/proximity/vcnl3020.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for Vishay VCNL3020 proximity sensor on i2c bus.
+ * Based on Vishay VCNL4000 driver code.
+ *
+ * TODO: interrupts.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define VCNL3020_PROD_ID	0x21
+
+#define VCNL_COMMAND		0x80 /* Command register */
+#define VCNL_PROD_REV		0x81 /* Product ID and Revision ID */
+#define VCNL_PROXIMITY_RATE	0x82 /* Rate of Proximity Measurement */
+#define VCNL_LED_CURRENT	0x83 /* IR LED current for proximity mode */
+#define VCNL_PS_RESULT_HI	0x87 /* Proximity result register, MSB */
+#define VCNL_PS_RESULT_LO	0x88 /* Proximity result register, LSB */
+#define VCNL_PS_ICR		0x89 /* Interrupt Control Register */
+#define VCNL_PS_LO_THR_HI	0x8a /* High byte of low threshold value */
+#define VCNL_PS_LO_THR_LO	0x8b /* Low byte of low threshold value */
+#define VCNL_PS_HI_THR_HI	0x8c /* High byte of high threshold value */
+#define VCNL_PS_HI_THR_LO	0x8d /* Low byte of high threshold value */
+#define VCNL_ISR		0x8e /* Interrupt Status Register */
+#define VCNL_PS_MOD_ADJ		0x8f /* Proximity Modulator Timing Adjustment */
+
+/* Bit masks for COMMAND register */
+#define VCNL_PS_RDY		BIT(5) /* proximity data ready? */
+#define VCNL_PS_OD		BIT(3) /* start on-demand proximity
+					* measurement
+					*/
+
+#define VCNL_ON_DEMAND_TIMEOUT_US	100000
+#define VCNL_POLL_US			20000
+
+/**
+ * struct vcnl3020_data - vcnl3020 specific data.
+ * @regmap:	device register map.
+ * @dev:	vcnl3020 device.
+ * @rev:	revision id.
+ * @lock:	lock for protecting access to device hardware registers.
+ */
+struct vcnl3020_data {
+	struct regmap *regmap;
+	struct device *dev;
+	u8 rev;
+	struct mutex lock;
+};
+
+/**
+ * struct vcnl3020_property - vcnl3020 property.
+ * @name:	property name.
+ * @reg:	i2c register offset.
+ * @conversion_func:	conversion function.
+ */
+struct vcnl3020_property {
+	const char *name;
+	u32 reg;
+	u32 (*conversion_func)(u32 *val);
+};
+
+static u32 microamp_to_reg(u32 *val)
+{
+	/*
+	 * An example of conversion from uA to reg val:
+	 * 200000 uA == 200 mA == 20
+	 */
+	return *val /= 10000;
+};
+
+static struct vcnl3020_property vcnl3020_led_current_property = {
+	.name = "vishay,led-current-microamp",
+	.reg = VCNL_LED_CURRENT,
+	.conversion_func = microamp_to_reg,
+};
+
+static int vcnl3020_get_and_apply_property(struct vcnl3020_data *data,
+					   struct vcnl3020_property prop)
+{
+	int rc;
+	u32 val;
+
+	rc = device_property_read_u32(data->dev, prop.name, &val);
+	if (rc)
+		return 0;
+
+	if (prop.conversion_func)
+		prop.conversion_func(&val);
+
+	rc = regmap_write(data->regmap, prop.reg, val);
+	if (rc) {
+		dev_err(data->dev, "Error (%d) setting property (%s)\n",
+			rc, prop.name);
+	}
+
+	return rc;
+}
+
+static int vcnl3020_init(struct vcnl3020_data *data)
+{
+	int rc;
+	unsigned int reg;
+
+	rc = regmap_read(data->regmap, VCNL_PROD_REV, &reg);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) reading product revision\n", rc);
+		return rc;
+	}
+
+	if (reg != VCNL3020_PROD_ID) {
+		dev_err(data->dev,
+			"Product id (%x) did not match vcnl3020 (%x)\n", reg,
+			VCNL3020_PROD_ID);
+		return -ENODEV;
+	}
+
+	data->rev = reg;
+	mutex_init(&data->lock);
+
+	return vcnl3020_get_and_apply_property(data,
+					       vcnl3020_led_current_property);
+};
+
+static int vcnl3020_measure_proximity(struct vcnl3020_data *data, int *val)
+{
+	int rc;
+	unsigned int reg;
+	__be16 res;
+
+	mutex_lock(&data->lock);
+
+	rc = regmap_write(data->regmap, VCNL_COMMAND, VCNL_PS_OD);
+	if (rc)
+		goto err_unlock;
+
+	/* wait for data to become ready */
+	rc = regmap_read_poll_timeout(data->regmap, VCNL_COMMAND, reg,
+				      reg & VCNL_PS_RDY, VCNL_POLL_US,
+				      VCNL_ON_DEMAND_TIMEOUT_US);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) reading vcnl3020 command register\n", rc);
+		goto err_unlock;
+	}
+
+	/* high & low result bytes read */
+	rc = regmap_bulk_read(data->regmap, VCNL_PS_RESULT_HI, &res,
+			      sizeof(res));
+	if (rc)
+		goto err_unlock;
+
+	*val = be16_to_cpu(res);
+
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return rc;
+}
+
+static const struct iio_chan_spec vcnl3020_channels[] = {
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	},
+};
+
+static int vcnl3020_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, int *val,
+			     int *val2, long mask)
+{
+	int rc;
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		rc = vcnl3020_measure_proximity(data, val);
+		if (rc)
+			return rc;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info vcnl3020_info = {
+	.read_raw = vcnl3020_read_raw,
+};
+
+static const struct regmap_config vcnl3020_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= VCNL_PS_MOD_ADJ,
+};
+
+static int vcnl3020_probe(struct i2c_client *client)
+{
+	struct vcnl3020_data *data;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	int rc;
+
+	regmap = devm_regmap_init_i2c(client, &vcnl3020_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "regmap_init failed\n");
+		return PTR_ERR(regmap);
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->regmap = regmap;
+	data->dev = &client->dev;
+
+	rc = vcnl3020_init(data);
+	if (rc)
+		return rc;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &vcnl3020_info;
+	indio_dev->channels = vcnl3020_channels;
+	indio_dev->num_channels = ARRAY_SIZE(vcnl3020_channels);
+	indio_dev->name = "vcnl3020";
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct of_device_id vcnl3020_of_match[] = {
+	{
+		.compatible = "vishay,vcnl3020",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, vcnl3020_of_match);
+
+static struct i2c_driver vcnl3020_driver = {
+	.driver = {
+		.name   = "vcnl3020",
+		.of_match_table = vcnl3020_of_match,
+	},
+	.probe_new  = vcnl3020_probe,
+};
+module_i2c_driver(vcnl3020_driver);
+
+MODULE_AUTHOR("Ivan Mikhaylov <i.mikhaylov@yadro.com>");
+MODULE_DESCRIPTION("Vishay VCNL3020 proximity sensor driver");
+MODULE_LICENSE("GPL");
-- 
2.21.1


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document
  2020-05-07 13:25 ` [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document Ivan Mikhaylov
@ 2020-05-08 14:51   ` Jonathan Cameron
  2020-05-09 10:38     ` Ivan Mikhaylov
  0 siblings, 1 reply; 6+ messages in thread
From: Jonathan Cameron @ 2020-05-08 14:51 UTC (permalink / raw)
  To: Ivan Mikhaylov
  Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, linux-iio, linux-kernel, devicetree,
	Mark Rutland, Rob Herring, Andy Shevchenko

On Thu, 7 May 2020 16:25:59 +0300
Ivan Mikhaylov <i.mikhaylov@yadro.com> wrote:

> Mostly standard i2c driver with some additional led-current option
> for vcnl3020.
> 
> Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
> ---
>  .../iio/proximity/vishay,vcnl3020.yaml        | 65 +++++++++++++++++++
>  1 file changed, 65 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
> new file mode 100644
> index 000000000000..408dee17cdf5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
> @@ -0,0 +1,65 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/proximity/vishay,vcnl3020.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Integrated Proximity Sensor With Infrared Emitter
> +
> +maintainers:
> +  - Ivan Mikhaylov <i.mikhaylov@yadro.com>
> +
> +description: |
> +  The VCNL3020 is a fully integrated proximity sensor. Fully integrated means
> +  that the infrared emitter is included in the package. It has 16-bit
> +  resolution. It includes a signal processing IC and features standard I2C
> +  communication interface. It features an interrupt function.
> +
> +  Specifications about the devices can be found at:
> +  https://www.vishay.com/docs/84150/vcnl3020.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - vishay,vcnl3020
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  vdd-supply:
> +    description: Regulator that provides power to the sensor
> +
> +  vddio-supply:
> +    description: Regulator that provides power to the bus
> +
> +  vishay,led-current-microamp:
> +    description:
> +      IR LED current value with valid Range = 0 to 20d. e.g. 0 = 0 mA,
> +      1 = 10 mA, 20 = 200 mA. LED Current is limited to 200 mA for values
> +      higher than decimal 20. The drive current for the LED used in proximity
> +      sensing.

This text is really confusing. Just let the enum speak for itself and leave text as
something short like

"The driver current for the LED used in proximity sensing. "

Units and values are clear already.

> +    enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000,
> +          100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
> +          180000, 190000, 200000]
> +    default: 20000
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    i2c {
> +
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        proximity@13 {
> +              compatible = "vishay,vcnl3020";
> +              reg = <0x13>;
> +              vishay,led-current-microamp = <200000>;
> +        };
> +    };



^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document
  2020-05-08 14:51   ` Jonathan Cameron
@ 2020-05-09 10:38     ` Ivan Mikhaylov
  2020-05-09 15:44       ` Jonathan Cameron
  0 siblings, 1 reply; 6+ messages in thread
From: Ivan Mikhaylov @ 2020-05-09 10:38 UTC (permalink / raw)
  To: Jonathan Cameron
  Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, linux-iio, linux-kernel, devicetree,
	Mark Rutland, Rob Herring, Andy Shevchenko

On Fri, 2020-05-08 at 15:51 +0100, Jonathan Cameron wrote:
> On Thu, 7 May 2020 16:25:59 +0300
> Ivan Mikhaylov <i.mikhaylov@yadro.com> wrote:
> 
> > Mostly standard i2c driver with some additional led-current option
> > for vcnl3020.
> > 
> > Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
> > ---
> >  .../iio/proximity/vishay,vcnl3020.yaml        | 65 +++++++++++++++++++
> >  1 file changed, 65 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
> > b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
> > new file mode 100644
> > index 000000000000..408dee17cdf5
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
> > @@ -0,0 +1,65 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/proximity/vishay,vcnl3020.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Integrated Proximity Sensor With Infrared Emitter
> > +
> > +maintainers:
> > +  - Ivan Mikhaylov <i.mikhaylov@yadro.com>
> > +
> > +description: |
> > +  The VCNL3020 is a fully integrated proximity sensor. Fully integrated
> > means
> > +  that the infrared emitter is included in the package. It has 16-bit
> > +  resolution. It includes a signal processing IC and features standard I2C
> > +  communication interface. It features an interrupt function.
> > +
> > +  Specifications about the devices can be found at:
> > +  https://www.vishay.com/docs/84150/vcnl3020.pdf
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - vishay,vcnl3020
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  vdd-supply:
> > +    description: Regulator that provides power to the sensor
> > +
> > +  vddio-supply:
> > +    description: Regulator that provides power to the bus
> > +
> > +  vishay,led-current-microamp:
> > +    description:
> > +      IR LED current value with valid Range = 0 to 20d. e.g. 0 = 0 mA,
> > +      1 = 10 mA, 20 = 200 mA. LED Current is limited to 200 mA for values
> > +      higher than decimal 20. The drive current for the LED used in
> > proximity
> > +      sensing.
> 
> This text is really confusing. Just let the enum speak for itself and leave
> text as
> something short like
> 
> "The driver current for the LED used in proximity sensing. "
> 
> Units and values are clear already.
> 

Jonathan, just to double check, for preventing further problems with
misunderstanding, is that what you want?

  vishay,led-current-microamp:
    description:
        The driver current for the LED used in proximity sensing.

    enum: [0..200000] <- just for shortening
    default: 20000

Thanks.


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document
  2020-05-09 10:38     ` Ivan Mikhaylov
@ 2020-05-09 15:44       ` Jonathan Cameron
  0 siblings, 0 replies; 6+ messages in thread
From: Jonathan Cameron @ 2020-05-09 15:44 UTC (permalink / raw)
  To: Ivan Mikhaylov, Jonathan Cameron
  Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, linux-iio, linux-kernel, devicetree,
	Mark Rutland, Rob Herring, Andy Shevchenko



On 9 May 2020 11:38:46 BST, Ivan Mikhaylov <i.mikhaylov@yadro.com> wrote:
>On Fri, 2020-05-08 at 15:51 +0100, Jonathan Cameron wrote:
>> On Thu, 7 May 2020 16:25:59 +0300
>> Ivan Mikhaylov <i.mikhaylov@yadro.com> wrote:
>> 
>> > Mostly standard i2c driver with some additional led-current option
>> > for vcnl3020.
>> > 
>> > Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
>> > ---
>> >  .../iio/proximity/vishay,vcnl3020.yaml        | 65
>+++++++++++++++++++
>> >  1 file changed, 65 insertions(+)
>> >  create mode 100644
>> >
>Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
>> > 
>> > diff --git
>> >
>a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
>> >
>b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
>> > new file mode 100644
>> > index 000000000000..408dee17cdf5
>> > --- /dev/null
>> > +++
>b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
>> > @@ -0,0 +1,65 @@
>> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> > +%YAML 1.2
>> > +---
>> > +$id:
>http://devicetree.org/schemas/iio/proximity/vishay,vcnl3020.yaml#
>> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> > +
>> > +title: Integrated Proximity Sensor With Infrared Emitter
>> > +
>> > +maintainers:
>> > +  - Ivan Mikhaylov <i.mikhaylov@yadro.com>
>> > +
>> > +description: |
>> > +  The VCNL3020 is a fully integrated proximity sensor. Fully
>integrated
>> > means
>> > +  that the infrared emitter is included in the package. It has
>16-bit
>> > +  resolution. It includes a signal processing IC and features
>standard I2C
>> > +  communication interface. It features an interrupt function.
>> > +
>> > +  Specifications about the devices can be found at:
>> > +  https://www.vishay.com/docs/84150/vcnl3020.pdf
>> > +
>> > +properties:
>> > +  compatible:
>> > +    enum:
>> > +      - vishay,vcnl3020
>> > +
>> > +  reg:
>> > +    maxItems: 1
>> > +
>> > +  interrupts:
>> > +    maxItems: 1
>> > +
>> > +  vdd-supply:
>> > +    description: Regulator that provides power to the sensor
>> > +
>> > +  vddio-supply:
>> > +    description: Regulator that provides power to the bus
>> > +
>> > +  vishay,led-current-microamp:
>> > +    description:
>> > +      IR LED current value with valid Range = 0 to 20d. e.g. 0 = 0
>mA,
>> > +      1 = 10 mA, 20 = 200 mA. LED Current is limited to 200 mA for
>values
>> > +      higher than decimal 20. The drive current for the LED used
>in
>> > proximity
>> > +      sensing.
>> 
>> This text is really confusing. Just let the enum speak for itself and
>leave
>> text as
>> something short like
>> 
>> "The driver current for the LED used in proximity sensing. "
>> 
>> Units and values are clear already.
>> 
>
>Jonathan, just to double check, for preventing further problems with
>misunderstanding, is that what you want?
>
>  vishay,led-current-microamp:
>    description:
>        The driver current for the LED used in proximity sensing.
>
>    enum: [0..200000] <- just for shortening
>    default: 20000
>
>Thanks.

Yes

J

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2020-05-10  8:37 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-07 13:25 [PATCH v13 0/2] iio: proximity: driver for vcnl3020 Ivan Mikhaylov
2020-05-07 13:25 ` [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document Ivan Mikhaylov
2020-05-08 14:51   ` Jonathan Cameron
2020-05-09 10:38     ` Ivan Mikhaylov
2020-05-09 15:44       ` Jonathan Cameron
2020-05-07 13:26 ` [PATCH v13 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor Ivan Mikhaylov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).