Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v7 1/7] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML.
@ 2020-05-17 19:48 Artur Rojek
  2020-05-17 19:48 ` [PATCH v7 2/7] IIO: Ingenic JZ47xx: Error check clk_enable calls Artur Rojek
                   ` (6 more replies)
  0 siblings, 7 replies; 13+ messages in thread
From: Artur Rojek @ 2020-05-17 19:48 UTC (permalink / raw)
  To: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron,
	Paul Cercueil, Andy Shevchenko
  Cc: Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree,
	linux-iio, linux-kernel, Artur Rojek

Convert the textual documentation of Device Tree bindings for the
Ingenic JZ47xx SoCs ADC controller to YAML.

The `interrupts` property is now explicitly listed and marked as
required. While missing from the previous textual documentation, this
property has been used with all the boards which probe this driver.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
---

 Changes:

 v6: new patch

 v7: - specify `maxItems: 1` for single entry properties
     - get rid of redundant descriptions of said properties

 .../bindings/iio/adc/ingenic,adc.txt          | 49 -------------
 .../bindings/iio/adc/ingenic,adc.yaml         | 71 +++++++++++++++++++
 2 files changed, 71 insertions(+), 49 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
deleted file mode 100644
index cd9048cf9dcf..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Ingenic JZ47xx ADC controller IIO bindings
-
-Required properties:
-
-- compatible: Should be one of:
-  * ingenic,jz4725b-adc
-  * ingenic,jz4740-adc
-  * ingenic,jz4770-adc
-- reg: ADC controller registers location and length.
-- clocks: phandle to the SoC's ADC clock.
-- clock-names: Must be set to "adc".
-- #io-channel-cells: Must be set to <1> to indicate channels are selected
-  by index.
-
-ADC clients must use the format described in iio-bindings.txt, giving
-a phandle and IIO specifier pair ("io-channels") to the ADC controller.
-
-Example:
-
-#include <dt-bindings/iio/adc/ingenic,adc.h>
-
-adc: adc@10070000 {
-	compatible = "ingenic,jz4740-adc";
-	#io-channel-cells = <1>;
-
-	reg = <0x10070000 0x30>;
-
-	clocks = <&cgu JZ4740_CLK_ADC>;
-	clock-names = "adc";
-
-	interrupt-parent = <&intc>;
-	interrupts = <18>;
-};
-
-adc-keys {
-	...
-	compatible = "adc-keys";
-	io-channels = <&adc INGENIC_ADC_AUX>;
-	io-channel-names = "buttons";
-	...
-};
-
-battery {
-	...
-	compatible = "ingenic,jz4740-battery";
-	io-channels = <&adc INGENIC_ADC_BATTERY>;
-	io-channel-names = "battery";
-	...
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
new file mode 100644
index 000000000000..9f414dbdae86
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Ingenic JZ47xx ADC controller IIO bindings
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+description: >
+  Industrial I/O subsystem bindings for ADC controller found in
+  Ingenic JZ47xx SoCs.
+
+  ADC clients must use the format described in iio-bindings.txt, giving
+  a phandle and IIO specifier pair ("io-channels") to the ADC controller.
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4725b-adc
+      - ingenic,jz4740-adc
+      - ingenic,jz4770-adc
+
+  '#io-channel-cells':
+    const: 1
+    description:
+      Must be set to <1> to indicate channels are selected by index.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#io-channel-cells'
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4740-cgu.h>
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+    adc@10070000 {
+            compatible = "ingenic,jz4740-adc";
+            #io-channel-cells = <1>;
+
+            reg = <0x10070000 0x30>;
+
+            clocks = <&cgu JZ4740_CLK_ADC>;
+            clock-names = "adc";
+
+            interrupt-parent = <&intc>;
+            interrupts = <18>;
+    };
-- 
2.26.2


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v7 2/7] IIO: Ingenic JZ47xx: Error check clk_enable calls.
  2020-05-17 19:48 [PATCH v7 1/7] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML Artur Rojek
@ 2020-05-17 19:48 ` Artur Rojek
  2020-05-19 18:15   ` Jonathan Cameron
  2020-05-17 19:49 ` [PATCH v7 3/7] IIO: Ingenic JZ47xx: Add xlate cb to retrieve correct channel idx Artur Rojek
                   ` (5 subsequent siblings)
  6 siblings, 1 reply; 13+ messages in thread
From: Artur Rojek @ 2020-05-17 19:48 UTC (permalink / raw)
  To: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron,
	Paul Cercueil, Andy Shevchenko
  Cc: Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree,
	linux-iio, linux-kernel, Artur Rojek

Introduce error checks for the clk_enable calls used in this driver.
As part of the changes, move clk_enable/clk_disable calls out of
ingenic_adc_set_config and into respective logic of its callers.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
---

 Changes:

 v6: new patch

 v7: no change

 drivers/iio/adc/ingenic-adc.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 39c0a609fc94..6c3bbba7c44b 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -73,7 +73,6 @@ static void ingenic_adc_set_config(struct ingenic_adc *adc,
 {
 	uint32_t cfg;
 
-	clk_enable(adc->clk);
 	mutex_lock(&adc->lock);
 
 	cfg = readl(adc->base + JZ_ADC_REG_CFG) & ~mask;
@@ -81,7 +80,6 @@ static void ingenic_adc_set_config(struct ingenic_adc *adc,
 	writel(cfg, adc->base + JZ_ADC_REG_CFG);
 
 	mutex_unlock(&adc->lock);
-	clk_disable(adc->clk);
 }
 
 static void ingenic_adc_enable(struct ingenic_adc *adc,
@@ -124,6 +122,8 @@ static int ingenic_adc_write_raw(struct iio_dev *iio_dev,
 				 long m)
 {
 	struct ingenic_adc *adc = iio_priv(iio_dev);
+	struct device *dev = iio_dev->dev.parent;
+	int ret;
 
 	switch (m) {
 	case IIO_CHAN_INFO_SCALE:
@@ -131,6 +131,14 @@ static int ingenic_adc_write_raw(struct iio_dev *iio_dev,
 		case INGENIC_ADC_BATTERY:
 			if (!adc->soc_data->battery_vref_mode)
 				return -EINVAL;
+
+			ret = clk_enable(adc->clk);
+			if (ret) {
+				dev_err(dev, "Failed to enable clock: %d\n",
+					ret);
+				return ret;
+			}
+
 			if (val > JZ_ADC_BATTERY_LOW_VREF) {
 				ingenic_adc_set_config(adc,
 						       JZ_ADC_REG_CFG_BAT_MD,
@@ -142,6 +150,9 @@ static int ingenic_adc_write_raw(struct iio_dev *iio_dev,
 						       JZ_ADC_REG_CFG_BAT_MD);
 				adc->low_vref_mode = true;
 			}
+
+			clk_disable(adc->clk);
+
 			return 0;
 		default:
 			return -EINVAL;
@@ -317,6 +328,13 @@ static int ingenic_adc_read_chan_info_raw(struct ingenic_adc *adc,
 					  int *val)
 {
 	int bit, ret, engine = (chan->channel == INGENIC_ADC_BATTERY);
+	struct device *dev = iio_priv_to_dev(adc)->dev.parent;
+
+	ret = clk_enable(adc->clk);
+	if (ret) {
+		dev_err(dev, "Failed to enable clock: %d\n", ret);
+		return ret;
+	}
 
 	/* We cannot sample AUX/AUX2 in parallel. */
 	mutex_lock(&adc->aux_lock);
@@ -325,7 +343,6 @@ static int ingenic_adc_read_chan_info_raw(struct ingenic_adc *adc,
 		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit);
 	}
 
-	clk_enable(adc->clk);
 	ret = ingenic_adc_capture(adc, engine);
 	if (ret)
 		goto out;
-- 
2.26.2


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v7 3/7] IIO: Ingenic JZ47xx: Add xlate cb to retrieve correct channel idx
  2020-05-17 19:48 [PATCH v7 1/7] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML Artur Rojek
  2020-05-17 19:48 ` [PATCH v7 2/7] IIO: Ingenic JZ47xx: Error check clk_enable calls Artur Rojek
@ 2020-05-17 19:49 ` Artur Rojek
  2020-05-17 19:49 ` [PATCH v7 4/7] dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC Artur Rojek
                   ` (4 subsequent siblings)
  6 siblings, 0 replies; 13+ messages in thread
From: Artur Rojek @ 2020-05-17 19:49 UTC (permalink / raw)
  To: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron,
	Paul Cercueil, Andy Shevchenko
  Cc: Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree,
	linux-iio, linux-kernel, Artur Rojek

Provide an of_xlate callback in order to retrieve the correct channel
specifier index from the IIO channels array.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
---

 Changes:

 v2-v7: no change

 drivers/iio/adc/ingenic-adc.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 6c3bbba7c44b..0eee4b4fb96c 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -400,6 +400,21 @@ static int ingenic_adc_read_raw(struct iio_dev *iio_dev,
 	}
 }
 
+static int ingenic_adc_of_xlate(struct iio_dev *iio_dev,
+				const struct of_phandle_args *iiospec)
+{
+	int i;
+
+	if (!iiospec->args_count)
+		return -EINVAL;
+
+	for (i = 0; i < iio_dev->num_channels; ++i)
+		if (iio_dev->channels[i].channel == iiospec->args[0])
+			return i;
+
+	return -EINVAL;
+}
+
 static void ingenic_adc_clk_cleanup(void *data)
 {
 	clk_unprepare(data);
@@ -409,6 +424,7 @@ static const struct iio_info ingenic_adc_info = {
 	.write_raw = ingenic_adc_write_raw,
 	.read_raw = ingenic_adc_read_raw,
 	.read_avail = ingenic_adc_read_avail,
+	.of_xlate = ingenic_adc_of_xlate,
 };
 
 static const struct iio_chan_spec ingenic_channels[] = {
-- 
2.26.2


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v7 4/7] dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC
  2020-05-17 19:48 [PATCH v7 1/7] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML Artur Rojek
  2020-05-17 19:48 ` [PATCH v7 2/7] IIO: Ingenic JZ47xx: Error check clk_enable calls Artur Rojek
  2020-05-17 19:49 ` [PATCH v7 3/7] IIO: Ingenic JZ47xx: Add xlate cb to retrieve correct channel idx Artur Rojek
@ 2020-05-17 19:49 ` Artur Rojek
  2020-05-17 19:49 ` [PATCH v7 5/7] IIO: Ingenic JZ47xx: Add touchscreen mode Artur Rojek
                   ` (3 subsequent siblings)
  6 siblings, 0 replies; 13+ messages in thread
From: Artur Rojek @ 2020-05-17 19:49 UTC (permalink / raw)
  To: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron,
	Paul Cercueil, Andy Shevchenko
  Cc: Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree,
	linux-iio, linux-kernel, Artur Rojek, Rob Herring

Introduce support for touchscreen channels found in JZ47xx SoCs.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
---

 Changes:

 v2-v7: no change

 include/dt-bindings/iio/adc/ingenic,adc.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/dt-bindings/iio/adc/ingenic,adc.h b/include/dt-bindings/iio/adc/ingenic,adc.h
index 42f871ab3272..95e20a8d6dc8 100644
--- a/include/dt-bindings/iio/adc/ingenic,adc.h
+++ b/include/dt-bindings/iio/adc/ingenic,adc.h
@@ -7,5 +7,7 @@
 #define INGENIC_ADC_AUX		0
 #define INGENIC_ADC_BATTERY	1
 #define INGENIC_ADC_AUX2	2
+#define INGENIC_ADC_TOUCH_XP	3
+#define INGENIC_ADC_TOUCH_YP	4
 
 #endif
-- 
2.26.2


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v7 5/7] IIO: Ingenic JZ47xx: Add touchscreen mode.
  2020-05-17 19:48 [PATCH v7 1/7] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML Artur Rojek
                   ` (2 preceding siblings ...)
  2020-05-17 19:49 ` [PATCH v7 4/7] dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC Artur Rojek
@ 2020-05-17 19:49 ` Artur Rojek
  2020-05-17 19:49 ` [PATCH v7 6/7] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek
                   ` (2 subsequent siblings)
  6 siblings, 0 replies; 13+ messages in thread
From: Artur Rojek @ 2020-05-17 19:49 UTC (permalink / raw)
  To: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron,
	Paul Cercueil, Andy Shevchenko
  Cc: Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree,
	linux-iio, linux-kernel, Artur Rojek

The SADC component in JZ47xx SoCs provides support for touchscreen
operations (pen position and pen down pressure) in single-ended and
differential modes.

Of the known hardware to use this controller, GCW Zero and Anbernic RG-350
utilize the touchscreen mode by having their joystick(s) attached to the
X/Y positive/negative input pins.
GCW Zero comes with a single joystick and is sufficiently handled with the
currently implemented single-ended mode. Support for boards with two
joysticks, where one is hooked up to Xn/Yn and the other to Xp/Yp channels
will need to be provided in the future.

The touchscreen component of SADC takes a significant time to stabilize
after first receiving the clock and a delay of 50ms has been empirically
proven to be a safe value before data sampling can begin.

All the boards which probe this driver have the interrupt provided from
Device Tree, with no need to handle a case where the IRQ was not provided.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
---

 Changes:

 v2: - improve description of the touchscreen mode,
     - get rid of the unneeded kfifo,
     - drop IIO_BUFFER_CB from Kconfig,
     - remove extended names from the touchscreen channels

 v3: remove unneeded `linux/iio/kfifo_buf.h` include

 v4: clarify irq provider source in the patch description

 v5: no change

 v6: - correct the spelling of Device Tree and IRQ in commit message
     - don't omit trailing commas from initializer lists
     - error check `clk_enable`
     - remove redundant `dev_err` from `platform_get_irq` error check

 v7: no change

 drivers/iio/adc/Kconfig       |   1 +
 drivers/iio/adc/ingenic-adc.c | 115 +++++++++++++++++++++++++++++++++-
 2 files changed, 114 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 12bb8b7ca1ff..c3314135fa2a 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -465,6 +465,7 @@ config INA2XX_ADC
 config INGENIC_ADC
 	tristate "Ingenic JZ47xx SoCs ADC driver"
 	depends on MIPS || COMPILE_TEST
+	select IIO_BUFFER
 	help
 	  Say yes here to build support for the Ingenic JZ47xx SoCs ADC unit.
 
diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 0eee4b4fb96c..49226d8fd8f6 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -8,7 +8,9 @@
 
 #include <dt-bindings/iio/adc/ingenic,adc.h>
 #include <linux/clk.h>
+#include <linux/iio/buffer.h>
 #include <linux/iio/iio.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
@@ -20,6 +22,8 @@
 #define JZ_ADC_REG_CFG			0x04
 #define JZ_ADC_REG_CTRL			0x08
 #define JZ_ADC_REG_STATUS		0x0c
+#define JZ_ADC_REG_ADSAME		0x10
+#define JZ_ADC_REG_ADWAIT		0x14
 #define JZ_ADC_REG_ADTCH		0x18
 #define JZ_ADC_REG_ADBDAT		0x1c
 #define JZ_ADC_REG_ADSDAT		0x20
@@ -28,6 +32,9 @@
 #define JZ_ADC_REG_ENABLE_PD		BIT(7)
 #define JZ_ADC_REG_CFG_AUX_MD		(BIT(0) | BIT(1))
 #define JZ_ADC_REG_CFG_BAT_MD		BIT(4)
+#define JZ_ADC_REG_CFG_PULL_UP(n)	((n) << 16)
+#define JZ_ADC_REG_CFG_SAMPLE_NUM(n)	((n) << 10)
+#define JZ_ADC_REG_CFG_TOUCH_OPS_MASK	(BIT(31) | GENMASK(23, 10))
 #define JZ_ADC_REG_ADCLK_CLKDIV_LSB	0
 #define JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB	16
 #define JZ4770_ADC_REG_ADCLK_CLKDIV10US_LSB	8
@@ -44,6 +51,14 @@
 #define JZ4770_ADC_BATTERY_VREF			6600
 #define JZ4770_ADC_BATTERY_VREF_BITS		12
 
+#define JZ_ADC_IRQ_AUX			BIT(0)
+#define JZ_ADC_IRQ_BATTERY		BIT(1)
+#define JZ_ADC_IRQ_TOUCH		BIT(2)
+#define JZ_ADC_IRQ_PEN_DOWN		BIT(3)
+#define JZ_ADC_IRQ_PEN_UP		BIT(4)
+#define JZ_ADC_IRQ_PEN_DOWN_SLEEP	BIT(5)
+#define JZ_ADC_IRQ_SLEEP		BIT(7)
+
 struct ingenic_adc;
 
 struct ingenic_adc_soc_data {
@@ -428,6 +443,28 @@ static const struct iio_info ingenic_adc_info = {
 };
 
 static const struct iio_chan_spec ingenic_channels[] = {
+	{
+		.type = IIO_POSITIONRELATIVE,
+		.indexed = 1,
+		.channel = INGENIC_ADC_TOUCH_XP,
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	},
+	{
+		.type = IIO_POSITIONRELATIVE,
+		.indexed = 1,
+		.channel = INGENIC_ADC_TOUCH_YP,
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	},
 	{
 		.extend_name = "aux",
 		.type = IIO_VOLTAGE,
@@ -435,6 +472,7 @@ static const struct iio_chan_spec ingenic_channels[] = {
 				      BIT(IIO_CHAN_INFO_SCALE),
 		.indexed = 1,
 		.channel = INGENIC_ADC_AUX,
+		.scan_index = -1,
 	},
 	{
 		.extend_name = "battery",
@@ -445,6 +483,7 @@ static const struct iio_chan_spec ingenic_channels[] = {
 						BIT(IIO_CHAN_INFO_SCALE),
 		.indexed = 1,
 		.channel = INGENIC_ADC_BATTERY,
+		.scan_index = -1,
 	},
 	{ /* Must always be last in the array. */
 		.extend_name = "aux2",
@@ -453,16 +492,76 @@ static const struct iio_chan_spec ingenic_channels[] = {
 				      BIT(IIO_CHAN_INFO_SCALE),
 		.indexed = 1,
 		.channel = INGENIC_ADC_AUX2,
+		.scan_index = -1,
 	},
 };
 
+static int ingenic_adc_buffer_enable(struct iio_dev *iio_dev)
+{
+	struct ingenic_adc *adc = iio_priv(iio_dev);
+	int ret;
+
+	ret = clk_enable(adc->clk);
+	if (ret) {
+		dev_err(iio_dev->dev.parent, "Failed to enable clock: %d\n",
+			ret);
+		return ret;
+	}
+
+	/* It takes significant time for the touchscreen hw to stabilize. */
+	msleep(50);
+	ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK,
+			       JZ_ADC_REG_CFG_SAMPLE_NUM(4) |
+			       JZ_ADC_REG_CFG_PULL_UP(4));
+	writew(80, adc->base + JZ_ADC_REG_ADWAIT);
+	writew(2, adc->base + JZ_ADC_REG_ADSAME);
+	writeb((u8)~JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_CTRL);
+	writel(0, adc->base + JZ_ADC_REG_ADTCH);
+	ingenic_adc_enable(adc, 2, true);
+
+	return 0;
+}
+
+static int ingenic_adc_buffer_disable(struct iio_dev *iio_dev)
+{
+	struct ingenic_adc *adc = iio_priv(iio_dev);
+
+	ingenic_adc_enable(adc, 2, false);
+	writeb(0xff, adc->base + JZ_ADC_REG_CTRL);
+	writeb(0xff, adc->base + JZ_ADC_REG_STATUS);
+	ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK, 0);
+	writew(0, adc->base + JZ_ADC_REG_ADSAME);
+	writew(0, adc->base + JZ_ADC_REG_ADWAIT);
+	clk_disable(adc->clk);
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops ingenic_buffer_setup_ops = {
+	.postenable = &ingenic_adc_buffer_enable,
+	.predisable = &ingenic_adc_buffer_disable
+};
+
+static irqreturn_t ingenic_adc_irq(int irq, void *data)
+{
+	struct iio_dev *iio_dev = data;
+	struct ingenic_adc *adc = iio_priv(iio_dev);
+	u32 tdat;
+
+	tdat = readl(adc->base + JZ_ADC_REG_ADTCH);
+	iio_push_to_buffers(iio_dev, &tdat);
+	writeb(JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_STATUS);
+
+	return IRQ_HANDLED;
+}
+
 static int ingenic_adc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct iio_dev *iio_dev;
 	struct ingenic_adc *adc;
 	const struct ingenic_adc_soc_data *soc_data;
-	int ret;
+	int irq, ret;
 
 	soc_data = device_get_match_data(dev);
 	if (!soc_data)
@@ -477,6 +576,17 @@ static int ingenic_adc_probe(struct platform_device *pdev)
 	mutex_init(&adc->aux_lock);
 	adc->soc_data = soc_data;
 
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(dev, irq, ingenic_adc_irq, 0,
+			       dev_name(dev), iio_dev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to request irq: %d\n", ret);
+		return ret;
+	}
+
 	adc->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(adc->base))
 		return PTR_ERR(adc->base);
@@ -516,7 +626,8 @@ static int ingenic_adc_probe(struct platform_device *pdev)
 
 	iio_dev->dev.parent = dev;
 	iio_dev->name = "jz-adc";
-	iio_dev->modes = INDIO_DIRECT_MODE;
+	iio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
+	iio_dev->setup_ops = &ingenic_buffer_setup_ops;
 	iio_dev->channels = ingenic_channels;
 	iio_dev->num_channels = ARRAY_SIZE(ingenic_channels);
 	/* Remove AUX2 from the list of supported channels. */
-- 
2.26.2


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v7 6/7] dt-bindings: input: Add docs for ADC driven joystick.
  2020-05-17 19:48 [PATCH v7 1/7] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML Artur Rojek
                   ` (3 preceding siblings ...)
  2020-05-17 19:49 ` [PATCH v7 5/7] IIO: Ingenic JZ47xx: Add touchscreen mode Artur Rojek
@ 2020-05-17 19:49 ` Artur Rojek
  2020-05-18 14:22   ` Rob Herring
  2020-05-17 19:49 ` [PATCH v7 7/7] input: joystick: Add ADC attached joystick driver Artur Rojek
  2020-05-26 21:34 ` [PATCH v7 1/7] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML Rob Herring
  6 siblings, 1 reply; 13+ messages in thread
From: Artur Rojek @ 2020-05-17 19:49 UTC (permalink / raw)
  To: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron,
	Paul Cercueil, Andy Shevchenko
  Cc: Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree,
	linux-iio, linux-kernel, Artur Rojek, Rob Herring

Add documentation for the adc-joystick driver, used to provide support
for joysticks connected over ADC.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
---

 Changes:

 v2: - Add `reg` property to axis subnode in order to enumerate the axes,
     - rename `linux,abs-code` property to `linux,code`,
     - drop `linux,` prefix from the remaining properties of axis subnode

 v3: no change

 v4: - remove "bindings" from the unique identifier string,
     - replace `|` with `>` for all description properties,
     - specify the number of items for `io-channels`,
     - correct the regex pattern of `axis` property,
     - specify the value range of `reg` property for each axis,
     - put `abs-range` properties under `allOf` 

 v5: add `a-f` to the regex pattern of `axis` property

 v6-v7: no change

 .../bindings/input/adc-joystick.yaml          | 121 ++++++++++++++++++
 1 file changed, 121 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/adc-joystick.yaml

diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
new file mode 100644
index 000000000000..054406bbd22b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/adc-joystick.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ADC attached joystick
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+description: >
+  Bindings for joystick devices connected to ADC controllers supporting
+  the Industrial I/O subsystem.
+
+properties:
+  compatible:
+    const: adc-joystick
+
+  io-channels:
+    minItems: 1
+    maxItems: 1024
+    description: >
+      List of phandle and IIO specifier pairs.
+      Each pair defines one ADC channel to which a joystick axis is connected.
+      See Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - io-channels
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+patternProperties:
+  "^axis@[0-9a-f]+$":
+    type: object
+    description: >
+      Represents a joystick axis bound to the given ADC channel.
+      For each entry in the io-channels list, one axis subnode with a matching
+      reg property must be specified.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1023
+        description: Index of an io-channels list entry bound to this axis.
+
+      linux,code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: EV_ABS specific event code generated by the axis.
+
+      abs-range:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+          - items:
+              - description: minimum value
+              - description: maximum value
+        description: >
+          Minimum and maximum values produced by the axis.
+          For an ABS_X axis this will be the left-most and right-most
+          inclination of the joystick. If min > max, it is left to userspace to
+          treat the axis as inverted.
+          This property is interpreted as two signed 32 bit values.
+
+      abs-fuzz:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Amount of noise in the input value.
+          Omitting this property indicates the axis is precise.
+
+      abs-flat:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Axial "deadzone", or area around the center position, where the axis
+          is considered to be at rest.
+          Omitting this property indicates the axis always returns to exactly
+          the center position.
+
+    required:
+      - reg
+      - linux,code
+      - abs-range
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+    #include <dt-bindings/input/input.h>
+
+    joystick: adc-joystick {
+      compatible = "adc-joystick";
+      io-channels = <&adc INGENIC_ADC_TOUCH_XP>,
+                    <&adc INGENIC_ADC_TOUCH_YP>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      axis@0 {
+              reg = <0>;
+              linux,code = <ABS_X>;
+              abs-range = <3300 0>;
+              abs-fuzz = <4>;
+              abs-flat = <200>;
+      };
+      axis@1 {
+              reg = <1>;
+              linux,code = <ABS_Y>;
+              abs-range = <0 3300>;
+              abs-fuzz = <4>;
+              abs-flat = <200>;
+      };
+    };
-- 
2.26.2


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v7 7/7] input: joystick: Add ADC attached joystick driver.
  2020-05-17 19:48 [PATCH v7 1/7] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML Artur Rojek
                   ` (4 preceding siblings ...)
  2020-05-17 19:49 ` [PATCH v7 6/7] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek
@ 2020-05-17 19:49 ` Artur Rojek
  2020-05-19 18:25   ` Jonathan Cameron
  2020-05-19 20:43   ` Andy Shevchenko
  2020-05-26 21:34 ` [PATCH v7 1/7] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML Rob Herring
  6 siblings, 2 replies; 13+ messages in thread
From: Artur Rojek @ 2020-05-17 19:49 UTC (permalink / raw)
  To: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron,
	Paul Cercueil, Andy Shevchenko
  Cc: Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree,
	linux-iio, linux-kernel, Artur Rojek

Add a driver for joystick devices connected to ADC controllers
supporting the Industrial I/O subsystem.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---

 Changes:

 v2: - sanity check supported channel format on probe,
     - rename adc_joystick_disable to a more sensible adc_joystick_cleanup, 
     - enforce correct axis order by checking the `reg` property of
       child nodes

 v3-v5: no change

 v6: - remove redundant `<linux/of.h>`
     - set `val` for each endianness case in their respective branches
     - pass received error codes to return value of `adc_joystick_set_axes`
     - change `(bits >> 3) > 2` to `bits > 16` for readability
     - drop `of_match_ptr`

 v7: no change

 drivers/input/joystick/Kconfig        |  10 +
 drivers/input/joystick/Makefile       |   1 +
 drivers/input/joystick/adc-joystick.c | 253 ++++++++++++++++++++++++++
 3 files changed, 264 insertions(+)
 create mode 100644 drivers/input/joystick/adc-joystick.c

diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 940b744639c7..efbc20ec5099 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -42,6 +42,16 @@ config JOYSTICK_A3D
 	  To compile this driver as a module, choose M here: the
 	  module will be called a3d.
 
+config JOYSTICK_ADC
+	tristate "Simple joystick connected over ADC"
+	depends on IIO
+	select IIO_BUFFER_CB
+	help
+	  Say Y here if you have a simple joystick connected over ADC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adc-joystick.
+
 config JOYSTICK_ADI
 	tristate "Logitech ADI digital joysticks and gamepads"
 	select GAMEPORT
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 8656023f6ef5..58232b3057d3 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -6,6 +6,7 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_JOYSTICK_A3D)		+= a3d.o
+obj-$(CONFIG_JOYSTICK_ADC)		+= adc-joystick.o
 obj-$(CONFIG_JOYSTICK_ADI)		+= adi.o
 obj-$(CONFIG_JOYSTICK_AMIGA)		+= amijoy.o
 obj-$(CONFIG_JOYSTICK_AS5011)		+= as5011.o
diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c
new file mode 100644
index 000000000000..a4ba8eac5a12
--- /dev/null
+++ b/drivers/input/joystick/adc-joystick.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Input driver for joysticks connected over ADC.
+ * Copyright (c) 2019-2020 Artur Rojek <contact@artur-rojek.eu>
+ */
+#include <linux/ctype.h>
+#include <linux/input.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/consumer.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+struct adc_joystick_axis {
+	u32 code;
+	s32 range[2];
+	s32 fuzz;
+	s32 flat;
+};
+
+struct adc_joystick {
+	struct input_dev *input;
+	struct iio_cb_buffer *buffer;
+	struct adc_joystick_axis *axes;
+	struct iio_channel *chans;
+	int num_chans;
+};
+
+static int adc_joystick_handle(const void *data, void *private)
+{
+	struct adc_joystick *joy = private;
+	enum iio_endian endianness;
+	int bytes, msb, val, i;
+	bool sign;
+
+	bytes = joy->chans[0].channel->scan_type.storagebits >> 3;
+
+	for (i = 0; i < joy->num_chans; ++i) {
+		endianness = joy->chans[i].channel->scan_type.endianness;
+		msb = joy->chans[i].channel->scan_type.realbits - 1;
+		sign = (tolower(joy->chans[i].channel->scan_type.sign) == 's');
+
+		switch (bytes) {
+		case 1:
+			val = ((const u8 *)data)[i];
+			break;
+		case 2:
+			if (endianness == IIO_BE)
+				val = be16_to_cpu(((const u16 *)data)[i]);
+			else if (endianness == IIO_LE)
+				val = le16_to_cpu(((const u16 *)data)[i]);
+			else /* IIO_CPU */
+				val = ((const u16 *)data)[i];
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		val >>= joy->chans[i].channel->scan_type.shift;
+		if (sign)
+			val = sign_extend32(val, msb);
+		else
+			val &= GENMASK(msb, 0);
+		input_report_abs(joy->input, joy->axes[i].code, val);
+	}
+
+	input_sync(joy->input);
+
+	return 0;
+}
+
+static int adc_joystick_open(struct input_dev *dev)
+{
+	struct adc_joystick *joy = input_get_drvdata(dev);
+	int ret;
+
+	ret = iio_channel_start_all_cb(joy->buffer);
+	if (ret)
+		dev_err(dev->dev.parent, "Unable to start callback buffer");
+
+	return ret;
+}
+
+static void adc_joystick_close(struct input_dev *dev)
+{
+	struct adc_joystick *joy = input_get_drvdata(dev);
+
+	iio_channel_stop_all_cb(joy->buffer);
+}
+
+static void adc_joystick_cleanup(void *data)
+{
+	iio_channel_release_all_cb(data);
+}
+
+static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy)
+{
+	struct adc_joystick_axis *axes;
+	struct fwnode_handle *child;
+	int num_axes, ret, i;
+
+	num_axes = device_get_child_node_count(dev);
+	if (!num_axes) {
+		dev_err(dev, "Unable to find child nodes");
+		return -EINVAL;
+	}
+
+	if (num_axes != joy->num_chans) {
+		dev_err(dev, "Got %d child nodes for %d channels",
+			num_axes, joy->num_chans);
+		return -EINVAL;
+	}
+
+	axes = devm_kmalloc_array(dev, num_axes, sizeof(*axes), GFP_KERNEL);
+	if (!axes)
+		return -ENOMEM;
+
+	device_for_each_child_node(dev, child) {
+		ret = fwnode_property_read_u32(child, "reg", &i);
+		if (ret) {
+			dev_err(dev, "reg invalid or missing");
+			goto err;
+		}
+
+		if (i >= num_axes) {
+			ret = -EINVAL;
+			dev_err(dev, "No matching axis for reg %d", i);
+			goto err;
+		}
+
+		ret = fwnode_property_read_u32(child, "linux,code",
+					     &axes[i].code);
+		if (ret) {
+			dev_err(dev, "linux,code invalid or missing");
+			goto err;
+		}
+
+		ret = fwnode_property_read_u32_array(child, "abs-range",
+						   axes[i].range, 2);
+		if (ret) {
+			dev_err(dev, "abs-range invalid or missing");
+			goto err;
+		}
+
+		fwnode_property_read_u32(child, "abs-fuzz",
+					 &axes[i].fuzz);
+		fwnode_property_read_u32(child, "abs-flat",
+					 &axes[i].flat);
+
+		input_set_abs_params(joy->input, axes[i].code,
+				     axes[i].range[0], axes[i].range[1],
+				     axes[i].fuzz,
+				     axes[i].flat);
+		input_set_capability(joy->input, EV_ABS, axes[i].code);
+	}
+
+	joy->axes = axes;
+
+	return 0;
+
+err:
+	fwnode_handle_put(child);
+	return ret;
+}
+
+static int adc_joystick_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct adc_joystick *joy;
+	struct input_dev *input;
+	int bits, ret, i;
+
+	joy = devm_kzalloc(dev, sizeof(*joy), GFP_KERNEL);
+	if (!joy)
+		return -ENOMEM;
+
+	joy->chans = devm_iio_channel_get_all(dev);
+	if (IS_ERR(joy->chans)) {
+		ret = PTR_ERR(joy->chans);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Unable to get IIO channels");
+		return ret;
+	}
+
+	/* Count how many channels we got. NULL terminated. */
+	while (joy->chans[joy->num_chans].indio_dev)
+		joy->num_chans++;
+
+	bits = joy->chans[0].channel->scan_type.storagebits;
+	if (!bits || (bits > 16)) {
+		dev_err(dev, "Unsupported channel storage size");
+		return -EINVAL;
+	}
+	for (i = 1; i < joy->num_chans; ++i)
+		if (joy->chans[i].channel->scan_type.storagebits != bits) {
+			dev_err(dev, "Channels must have equal storage size");
+			return -EINVAL;
+		}
+
+	input = devm_input_allocate_device(dev);
+	if (!input) {
+		dev_err(dev, "Unable to allocate input device");
+		return -ENOMEM;
+	}
+
+	joy->input = input;
+	input->name = pdev->name;
+	input->id.bustype = BUS_HOST;
+	input->open = adc_joystick_open;
+	input->close = adc_joystick_close;
+
+	ret = adc_joystick_set_axes(dev, joy);
+	if (ret)
+		return ret;
+
+	input_set_drvdata(input, joy);
+	ret = input_register_device(input);
+	if (ret) {
+		dev_err(dev, "Unable to register input device: %d", ret);
+		return ret;
+	}
+
+	joy->buffer = iio_channel_get_all_cb(dev, adc_joystick_handle, joy);
+	if (IS_ERR(joy->buffer)) {
+		dev_err(dev, "Unable to allocate callback buffer");
+		return PTR_ERR(joy->buffer);
+	}
+
+	ret = devm_add_action_or_reset(dev, adc_joystick_cleanup, joy->buffer);
+	if (ret)
+		dev_err(dev, "Unable to add action");
+
+	return ret;
+}
+
+static const struct of_device_id adc_joystick_of_match[] = {
+	{ .compatible = "adc-joystick", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adc_joystick_of_match);
+
+static struct platform_driver adc_joystick_driver = {
+	.driver = {
+		.name = "adc-joystick",
+		.of_match_table = adc_joystick_of_match,
+	},
+	.probe = adc_joystick_probe,
+};
+module_platform_driver(adc_joystick_driver);
+
+MODULE_DESCRIPTION("Input driver for joysticks connected over ADC");
+MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>");
+MODULE_LICENSE("GPL");
-- 
2.26.2


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v7 6/7] dt-bindings: input: Add docs for ADC driven joystick.
  2020-05-17 19:49 ` [PATCH v7 6/7] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek
@ 2020-05-18 14:22   ` Rob Herring
  0 siblings, 0 replies; 13+ messages in thread
From: Rob Herring @ 2020-05-18 14:22 UTC (permalink / raw)
  To: Artur Rojek
  Cc: Andy Shevchenko, Rob Herring, Heiko Stuebner, linux-input,
	linux-iio, Dmitry Torokhov, linux-kernel, Mark Rutland,
	Paul Cercueil, Ezequiel Garcia, devicetree, Jonathan Cameron

On Sun, 17 May 2020 21:49:03 +0200, Artur Rojek wrote:
> Add documentation for the adc-joystick driver, used to provide support
> for joysticks connected over ADC.
> 
> Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
> Tested-by: Paul Cercueil <paul@crapouillou.net>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> 
>  Changes:
> 
>  v2: - Add `reg` property to axis subnode in order to enumerate the axes,
>      - rename `linux,abs-code` property to `linux,code`,
>      - drop `linux,` prefix from the remaining properties of axis subnode
> 
>  v3: no change
> 
>  v4: - remove "bindings" from the unique identifier string,
>      - replace `|` with `>` for all description properties,
>      - specify the number of items for `io-channels`,
>      - correct the regex pattern of `axis` property,
>      - specify the value range of `reg` property for each axis,
>      - put `abs-range` properties under `allOf`
> 
>  v5: add `a-f` to the regex pattern of `axis` property
> 
>  v6-v7: no change
> 
>  .../bindings/input/adc-joystick.yaml          | 121 ++++++++++++++++++
>  1 file changed, 121 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/adc-joystick.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Error: Documentation/devicetree/bindings/input/adc-joystick.example.dts:24.31-32 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:312: recipe for target 'Documentation/devicetree/bindings/input/adc-joystick.example.dt.yaml' failed
make[1]: *** [Documentation/devicetree/bindings/input/adc-joystick.example.dt.yaml] Error 1
Makefile:1300: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2

See https://patchwork.ozlabs.org/patch/1292230

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v7 2/7] IIO: Ingenic JZ47xx: Error check clk_enable calls.
  2020-05-17 19:48 ` [PATCH v7 2/7] IIO: Ingenic JZ47xx: Error check clk_enable calls Artur Rojek
@ 2020-05-19 18:15   ` Jonathan Cameron
  0 siblings, 0 replies; 13+ messages in thread
From: Jonathan Cameron @ 2020-05-19 18:15 UTC (permalink / raw)
  To: Artur Rojek
  Cc: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron,
	Paul Cercueil, Andy Shevchenko, Heiko Stuebner, Ezequiel Garcia,
	linux-input, devicetree, linux-iio, linux-kernel

On Sun, 17 May 2020 21:48:59 +0200
Artur Rojek <contact@artur-rojek.eu> wrote:

> Introduce error checks for the clk_enable calls used in this driver.
> As part of the changes, move clk_enable/clk_disable calls out of
> ingenic_adc_set_config and into respective logic of its callers.
> 
> Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
> Tested-by: Paul Cercueil <paul@crapouillou.net>

One trivial thing inline.

> ---
> 
>  Changes:
> 
>  v6: new patch
> 
>  v7: no change
> 
>  drivers/iio/adc/ingenic-adc.c | 23 ++++++++++++++++++++---
>  1 file changed, 20 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
> index 39c0a609fc94..6c3bbba7c44b 100644
> --- a/drivers/iio/adc/ingenic-adc.c
> +++ b/drivers/iio/adc/ingenic-adc.c
> @@ -73,7 +73,6 @@ static void ingenic_adc_set_config(struct ingenic_adc *adc,
>  {
>  	uint32_t cfg;
>  
> -	clk_enable(adc->clk);
>  	mutex_lock(&adc->lock);
>  
>  	cfg = readl(adc->base + JZ_ADC_REG_CFG) & ~mask;
> @@ -81,7 +80,6 @@ static void ingenic_adc_set_config(struct ingenic_adc *adc,
>  	writel(cfg, adc->base + JZ_ADC_REG_CFG);
>  
>  	mutex_unlock(&adc->lock);
> -	clk_disable(adc->clk);
>  }
>  
>  static void ingenic_adc_enable(struct ingenic_adc *adc,
> @@ -124,6 +122,8 @@ static int ingenic_adc_write_raw(struct iio_dev *iio_dev,
>  				 long m)
>  {
>  	struct ingenic_adc *adc = iio_priv(iio_dev);
> +	struct device *dev = iio_dev->dev.parent;
> +	int ret;
>  
>  	switch (m) {
>  	case IIO_CHAN_INFO_SCALE:
> @@ -131,6 +131,14 @@ static int ingenic_adc_write_raw(struct iio_dev *iio_dev,
>  		case INGENIC_ADC_BATTERY:
>  			if (!adc->soc_data->battery_vref_mode)
>  				return -EINVAL;
> +
> +			ret = clk_enable(adc->clk);
> +			if (ret) {
> +				dev_err(dev, "Failed to enable clock: %d\n",
> +					ret);
> +				return ret;
> +			}
> +
>  			if (val > JZ_ADC_BATTERY_LOW_VREF) {
>  				ingenic_adc_set_config(adc,
>  						       JZ_ADC_REG_CFG_BAT_MD,
> @@ -142,6 +150,9 @@ static int ingenic_adc_write_raw(struct iio_dev *iio_dev,
>  						       JZ_ADC_REG_CFG_BAT_MD);
>  				adc->low_vref_mode = true;
>  			}
> +
> +			clk_disable(adc->clk);
> +
>  			return 0;
>  		default:
>  			return -EINVAL;
> @@ -317,6 +328,13 @@ static int ingenic_adc_read_chan_info_raw(struct ingenic_adc *adc,
>  					  int *val)
>  {
>  	int bit, ret, engine = (chan->channel == INGENIC_ADC_BATTERY);
> +	struct device *dev = iio_priv_to_dev(adc)->dev.parent;
> +
> +	ret = clk_enable(adc->clk);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable clock: %d\n", ret);
> +		return ret;
> +	}

It almost certainly doesn't matter, but if we are going to move the clk enable
outside the lock, we should do the same with the disable.

>  
>  	/* We cannot sample AUX/AUX2 in parallel. */
>  	mutex_lock(&adc->aux_lock);
> @@ -325,7 +343,6 @@ static int ingenic_adc_read_chan_info_raw(struct ingenic_adc *adc,
>  		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit);
>  	}
>  
> -	clk_enable(adc->clk);
>  	ret = ingenic_adc_capture(adc, engine);
>  	if (ret)
>  		goto out;



^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v7 7/7] input: joystick: Add ADC attached joystick driver.
  2020-05-17 19:49 ` [PATCH v7 7/7] input: joystick: Add ADC attached joystick driver Artur Rojek
@ 2020-05-19 18:25   ` Jonathan Cameron
  2020-05-19 20:43   ` Andy Shevchenko
  1 sibling, 0 replies; 13+ messages in thread
From: Jonathan Cameron @ 2020-05-19 18:25 UTC (permalink / raw)
  To: Artur Rojek
  Cc: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron,
	Paul Cercueil, Andy Shevchenko, Heiko Stuebner, Ezequiel Garcia,
	linux-input, devicetree, linux-iio, linux-kernel

On Sun, 17 May 2020 21:49:04 +0200
Artur Rojek <contact@artur-rojek.eu> wrote:

> Add a driver for joystick devices connected to ADC controllers
> supporting the Industrial I/O subsystem.
> 
> Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
> Tested-by: Paul Cercueil <paul@crapouillou.net>
> Tested-by: Heiko Stuebner <heiko@sntech.de>
> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

For the rest of the patches I haven't commented on I'm
find with this but will be looking for a dt review tag from Rob.
+ you'll want to fix the > which should be a | that is annoying Rob's
bot (at least I guess that is what it is)


Thanks,

Jonathan

> ---
> 
>  Changes:
> 
>  v2: - sanity check supported channel format on probe,
>      - rename adc_joystick_disable to a more sensible adc_joystick_cleanup, 
>      - enforce correct axis order by checking the `reg` property of
>        child nodes
> 
>  v3-v5: no change
> 
>  v6: - remove redundant `<linux/of.h>`
>      - set `val` for each endianness case in their respective branches
>      - pass received error codes to return value of `adc_joystick_set_axes`
>      - change `(bits >> 3) > 2` to `bits > 16` for readability
>      - drop `of_match_ptr`
> 
>  v7: no change
> 
>  drivers/input/joystick/Kconfig        |  10 +
>  drivers/input/joystick/Makefile       |   1 +
>  drivers/input/joystick/adc-joystick.c | 253 ++++++++++++++++++++++++++
>  3 files changed, 264 insertions(+)
>  create mode 100644 drivers/input/joystick/adc-joystick.c
> 
> diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
> index 940b744639c7..efbc20ec5099 100644
> --- a/drivers/input/joystick/Kconfig
> +++ b/drivers/input/joystick/Kconfig
> @@ -42,6 +42,16 @@ config JOYSTICK_A3D
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called a3d.
>  
> +config JOYSTICK_ADC
> +	tristate "Simple joystick connected over ADC"
> +	depends on IIO
> +	select IIO_BUFFER_CB
> +	help
> +	  Say Y here if you have a simple joystick connected over ADC.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called adc-joystick.
> +
>  config JOYSTICK_ADI
>  	tristate "Logitech ADI digital joysticks and gamepads"
>  	select GAMEPORT
> diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
> index 8656023f6ef5..58232b3057d3 100644
> --- a/drivers/input/joystick/Makefile
> +++ b/drivers/input/joystick/Makefile
> @@ -6,6 +6,7 @@
>  # Each configuration option enables a list of files.
>  
>  obj-$(CONFIG_JOYSTICK_A3D)		+= a3d.o
> +obj-$(CONFIG_JOYSTICK_ADC)		+= adc-joystick.o
>  obj-$(CONFIG_JOYSTICK_ADI)		+= adi.o
>  obj-$(CONFIG_JOYSTICK_AMIGA)		+= amijoy.o
>  obj-$(CONFIG_JOYSTICK_AS5011)		+= as5011.o
> diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c
> new file mode 100644
> index 000000000000..a4ba8eac5a12
> --- /dev/null
> +++ b/drivers/input/joystick/adc-joystick.c
> @@ -0,0 +1,253 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Input driver for joysticks connected over ADC.
> + * Copyright (c) 2019-2020 Artur Rojek <contact@artur-rojek.eu>
> + */
> +#include <linux/ctype.h>
> +#include <linux/input.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +
> +struct adc_joystick_axis {
> +	u32 code;
> +	s32 range[2];
> +	s32 fuzz;
> +	s32 flat;
> +};
> +
> +struct adc_joystick {
> +	struct input_dev *input;
> +	struct iio_cb_buffer *buffer;
> +	struct adc_joystick_axis *axes;
> +	struct iio_channel *chans;
> +	int num_chans;
> +};
> +
> +static int adc_joystick_handle(const void *data, void *private)
> +{
> +	struct adc_joystick *joy = private;
> +	enum iio_endian endianness;
> +	int bytes, msb, val, i;
> +	bool sign;
> +
> +	bytes = joy->chans[0].channel->scan_type.storagebits >> 3;
> +
> +	for (i = 0; i < joy->num_chans; ++i) {
> +		endianness = joy->chans[i].channel->scan_type.endianness;
> +		msb = joy->chans[i].channel->scan_type.realbits - 1;
> +		sign = (tolower(joy->chans[i].channel->scan_type.sign) == 's');
> +
> +		switch (bytes) {
> +		case 1:
> +			val = ((const u8 *)data)[i];
> +			break;
> +		case 2:
> +			if (endianness == IIO_BE)
> +				val = be16_to_cpu(((const u16 *)data)[i]);
> +			else if (endianness == IIO_LE)
> +				val = le16_to_cpu(((const u16 *)data)[i]);
> +			else /* IIO_CPU */
> +				val = ((const u16 *)data)[i];
> +			break;
> +		default:
> +			return -EINVAL;
> +		}
> +
> +		val >>= joy->chans[i].channel->scan_type.shift;
> +		if (sign)
> +			val = sign_extend32(val, msb);
> +		else
> +			val &= GENMASK(msb, 0);
> +		input_report_abs(joy->input, joy->axes[i].code, val);
> +	}
> +
> +	input_sync(joy->input);
> +
> +	return 0;
> +}
> +
> +static int adc_joystick_open(struct input_dev *dev)
> +{
> +	struct adc_joystick *joy = input_get_drvdata(dev);
> +	int ret;
> +
> +	ret = iio_channel_start_all_cb(joy->buffer);
> +	if (ret)
> +		dev_err(dev->dev.parent, "Unable to start callback buffer");
> +
> +	return ret;
> +}
> +
> +static void adc_joystick_close(struct input_dev *dev)
> +{
> +	struct adc_joystick *joy = input_get_drvdata(dev);
> +
> +	iio_channel_stop_all_cb(joy->buffer);
> +}
> +
> +static void adc_joystick_cleanup(void *data)
> +{
> +	iio_channel_release_all_cb(data);
> +}
> +
> +static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy)
> +{
> +	struct adc_joystick_axis *axes;
> +	struct fwnode_handle *child;
> +	int num_axes, ret, i;
> +
> +	num_axes = device_get_child_node_count(dev);
> +	if (!num_axes) {
> +		dev_err(dev, "Unable to find child nodes");
> +		return -EINVAL;
> +	}
> +
> +	if (num_axes != joy->num_chans) {
> +		dev_err(dev, "Got %d child nodes for %d channels",
> +			num_axes, joy->num_chans);
> +		return -EINVAL;
> +	}
> +
> +	axes = devm_kmalloc_array(dev, num_axes, sizeof(*axes), GFP_KERNEL);
> +	if (!axes)
> +		return -ENOMEM;
> +
> +	device_for_each_child_node(dev, child) {
> +		ret = fwnode_property_read_u32(child, "reg", &i);
> +		if (ret) {
> +			dev_err(dev, "reg invalid or missing");
> +			goto err;
> +		}
> +
> +		if (i >= num_axes) {
> +			ret = -EINVAL;
> +			dev_err(dev, "No matching axis for reg %d", i);
> +			goto err;
> +		}
> +
> +		ret = fwnode_property_read_u32(child, "linux,code",
> +					     &axes[i].code);
> +		if (ret) {
> +			dev_err(dev, "linux,code invalid or missing");
> +			goto err;
> +		}
> +
> +		ret = fwnode_property_read_u32_array(child, "abs-range",
> +						   axes[i].range, 2);
> +		if (ret) {
> +			dev_err(dev, "abs-range invalid or missing");
> +			goto err;
> +		}
> +
> +		fwnode_property_read_u32(child, "abs-fuzz",
> +					 &axes[i].fuzz);
> +		fwnode_property_read_u32(child, "abs-flat",
> +					 &axes[i].flat);
> +
> +		input_set_abs_params(joy->input, axes[i].code,
> +				     axes[i].range[0], axes[i].range[1],
> +				     axes[i].fuzz,
> +				     axes[i].flat);
> +		input_set_capability(joy->input, EV_ABS, axes[i].code);
> +	}
> +
> +	joy->axes = axes;
> +
> +	return 0;
> +
> +err:
> +	fwnode_handle_put(child);
> +	return ret;
> +}
> +
> +static int adc_joystick_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct adc_joystick *joy;
> +	struct input_dev *input;
> +	int bits, ret, i;
> +
> +	joy = devm_kzalloc(dev, sizeof(*joy), GFP_KERNEL);
> +	if (!joy)
> +		return -ENOMEM;
> +
> +	joy->chans = devm_iio_channel_get_all(dev);
> +	if (IS_ERR(joy->chans)) {
> +		ret = PTR_ERR(joy->chans);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(dev, "Unable to get IIO channels");
> +		return ret;
> +	}
> +
> +	/* Count how many channels we got. NULL terminated. */
> +	while (joy->chans[joy->num_chans].indio_dev)
> +		joy->num_chans++;
> +
> +	bits = joy->chans[0].channel->scan_type.storagebits;
> +	if (!bits || (bits > 16)) {
> +		dev_err(dev, "Unsupported channel storage size");
> +		return -EINVAL;
> +	}
> +	for (i = 1; i < joy->num_chans; ++i)
> +		if (joy->chans[i].channel->scan_type.storagebits != bits) {
> +			dev_err(dev, "Channels must have equal storage size");
> +			return -EINVAL;
> +		}
> +
> +	input = devm_input_allocate_device(dev);
> +	if (!input) {
> +		dev_err(dev, "Unable to allocate input device");
> +		return -ENOMEM;
> +	}
> +
> +	joy->input = input;
> +	input->name = pdev->name;
> +	input->id.bustype = BUS_HOST;
> +	input->open = adc_joystick_open;
> +	input->close = adc_joystick_close;
> +
> +	ret = adc_joystick_set_axes(dev, joy);
> +	if (ret)
> +		return ret;
> +
> +	input_set_drvdata(input, joy);
> +	ret = input_register_device(input);
> +	if (ret) {
> +		dev_err(dev, "Unable to register input device: %d", ret);
> +		return ret;
> +	}
> +
> +	joy->buffer = iio_channel_get_all_cb(dev, adc_joystick_handle, joy);
> +	if (IS_ERR(joy->buffer)) {
> +		dev_err(dev, "Unable to allocate callback buffer");
> +		return PTR_ERR(joy->buffer);
> +	}
> +
> +	ret = devm_add_action_or_reset(dev, adc_joystick_cleanup, joy->buffer);
> +	if (ret)
> +		dev_err(dev, "Unable to add action");
> +
> +	return ret;
> +}
> +
> +static const struct of_device_id adc_joystick_of_match[] = {
> +	{ .compatible = "adc-joystick", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, adc_joystick_of_match);
> +
> +static struct platform_driver adc_joystick_driver = {
> +	.driver = {
> +		.name = "adc-joystick",
> +		.of_match_table = adc_joystick_of_match,
> +	},
> +	.probe = adc_joystick_probe,
> +};
> +module_platform_driver(adc_joystick_driver);
> +
> +MODULE_DESCRIPTION("Input driver for joysticks connected over ADC");
> +MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>");
> +MODULE_LICENSE("GPL");



^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v7 7/7] input: joystick: Add ADC attached joystick driver.
  2020-05-17 19:49 ` [PATCH v7 7/7] input: joystick: Add ADC attached joystick driver Artur Rojek
  2020-05-19 18:25   ` Jonathan Cameron
@ 2020-05-19 20:43   ` Andy Shevchenko
  2020-05-19 21:02     ` Paul Cercueil
  1 sibling, 1 reply; 13+ messages in thread
From: Andy Shevchenko @ 2020-05-19 20:43 UTC (permalink / raw)
  To: Artur Rojek
  Cc: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron,
	Paul Cercueil, Heiko Stuebner, Ezequiel Garcia, linux-input,
	devicetree, linux-iio, Linux Kernel Mailing List

On Sun, May 17, 2020 at 10:49 PM Artur Rojek <contact@artur-rojek.eu> wrote:
>
> Add a driver for joystick devices connected to ADC controllers
> supporting the Industrial I/O subsystem.

...

> +static int adc_joystick_handle(const void *data, void *private)
> +{
> +       struct adc_joystick *joy = private;
> +       enum iio_endian endianness;
> +       int bytes, msb, val, i;
> +       bool sign;
> +
> +       bytes = joy->chans[0].channel->scan_type.storagebits >> 3;
> +
> +       for (i = 0; i < joy->num_chans; ++i) {
> +               endianness = joy->chans[i].channel->scan_type.endianness;
> +               msb = joy->chans[i].channel->scan_type.realbits - 1;

> +               sign = (tolower(joy->chans[i].channel->scan_type.sign) == 's');

Do we need tolower()?

> +
> +               switch (bytes) {
> +               case 1:
> +                       val = ((const u8 *)data)[i];
> +                       break;
> +               case 2:
> +                       if (endianness == IIO_BE)

> +                               val = be16_to_cpu(((const u16 *)data)[i]);

Yeah, you have to provide bitwise types to satisfy sparse.
Maybe using *_to_cpup() will cure this.

> +                       else if (endianness == IIO_LE)
> +                               val = le16_to_cpu(((const u16 *)data)[i]);
> +                       else /* IIO_CPU */
> +                               val = ((const u16 *)data)[i];
> +                       break;
> +               default:
> +                       return -EINVAL;
> +               }
> +
> +               val >>= joy->chans[i].channel->scan_type.shift;
> +               if (sign)
> +                       val = sign_extend32(val, msb);
> +               else
> +                       val &= GENMASK(msb, 0);
> +               input_report_abs(joy->input, joy->axes[i].code, val);
> +       }
> +
> +       input_sync(joy->input);
> +
> +       return 0;
> +}

...

> +       /* Count how many channels we got. NULL terminated. */
> +       while (joy->chans[joy->num_chans].indio_dev)
> +               joy->num_chans++;

I don't see how useful this is. Why not simple do below...

> +       bits = joy->chans[0].channel->scan_type.storagebits;
> +       if (!bits || (bits > 16)) {
> +               dev_err(dev, "Unsupported channel storage size");
> +               return -EINVAL;
> +       }
> +       for (i = 1; i < joy->num_chans; ++i)
> +               if (joy->chans[i].channel->scan_type.storagebits != bits) {
> +                       dev_err(dev, "Channels must have equal storage size");
> +                       return -EINVAL;
> +               }

...something like

  for (i = 0; joy->chans[i].indio_dev; i++) {
    bits = joy->chans[i].channel->scan_type.storagebits;
    if (bits ...) {
      ...error handling...
    }
    if (bits != joy->chans[0].channel->scan_type.storagebits) {
      ...second level of error handling...
    }
 }

...

> +static const struct of_device_id adc_joystick_of_match[] = {
> +       { .compatible = "adc-joystick", },

> +       { },

No need comma.

> +};

-- 
With Best Regards,
Andy Shevchenko

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v7 7/7] input: joystick: Add ADC attached joystick driver.
  2020-05-19 20:43   ` Andy Shevchenko
@ 2020-05-19 21:02     ` Paul Cercueil
  0 siblings, 0 replies; 13+ messages in thread
From: Paul Cercueil @ 2020-05-19 21:02 UTC (permalink / raw)
  To: Andy Shevchenko
  Cc: Artur Rojek, Dmitry Torokhov, Rob Herring, Mark Rutland,
	Jonathan Cameron, Heiko Stuebner, Ezequiel Garcia, linux-input,
	devicetree, linux-iio, Linux Kernel Mailing List

Hi Andy,

Le mar. 19 mai 2020 à 23:43, Andy Shevchenko 
<andy.shevchenko@gmail.com> a écrit :
> On Sun, May 17, 2020 at 10:49 PM Artur Rojek <contact@artur-rojek.eu> 
> wrote:
>> 
>>  Add a driver for joystick devices connected to ADC controllers
>>  supporting the Industrial I/O subsystem.
> 
> ...
> 
>>  +static int adc_joystick_handle(const void *data, void *private)
>>  +{
>>  +       struct adc_joystick *joy = private;
>>  +       enum iio_endian endianness;
>>  +       int bytes, msb, val, i;
>>  +       bool sign;
>>  +
>>  +       bytes = joy->chans[0].channel->scan_type.storagebits >> 3;
>>  +
>>  +       for (i = 0; i < joy->num_chans; ++i) {
>>  +               endianness = 
>> joy->chans[i].channel->scan_type.endianness;
>>  +               msb = joy->chans[i].channel->scan_type.realbits - 1;
> 
>>  +               sign = 
>> (tolower(joy->chans[i].channel->scan_type.sign) == 's');
> 
> Do we need tolower()?

I'll answer this one:

The sign can be uppercase to specify that the value is sign-extended in 
all the storage bits.

-Paul

>>  +
>>  +               switch (bytes) {
>>  +               case 1:
>>  +                       val = ((const u8 *)data)[i];
>>  +                       break;
>>  +               case 2:
>>  +                       if (endianness == IIO_BE)
> 
>>  +                               val = be16_to_cpu(((const u16 
>> *)data)[i]);
> 
> Yeah, you have to provide bitwise types to satisfy sparse.
> Maybe using *_to_cpup() will cure this.
> 
>>  +                       else if (endianness == IIO_LE)
>>  +                               val = le16_to_cpu(((const u16 
>> *)data)[i]);
>>  +                       else /* IIO_CPU */
>>  +                               val = ((const u16 *)data)[i];
>>  +                       break;
>>  +               default:
>>  +                       return -EINVAL;
>>  +               }
>>  +
>>  +               val >>= joy->chans[i].channel->scan_type.shift;
>>  +               if (sign)
>>  +                       val = sign_extend32(val, msb);
>>  +               else
>>  +                       val &= GENMASK(msb, 0);
>>  +               input_report_abs(joy->input, joy->axes[i].code, 
>> val);
>>  +       }
>>  +
>>  +       input_sync(joy->input);
>>  +
>>  +       return 0;
>>  +}
> 
> ...
> 
>>  +       /* Count how many channels we got. NULL terminated. */
>>  +       while (joy->chans[joy->num_chans].indio_dev)
>>  +               joy->num_chans++;
> 
> I don't see how useful this is. Why not simple do below...
> 
>>  +       bits = joy->chans[0].channel->scan_type.storagebits;
>>  +       if (!bits || (bits > 16)) {
>>  +               dev_err(dev, "Unsupported channel storage size");
>>  +               return -EINVAL;
>>  +       }
>>  +       for (i = 1; i < joy->num_chans; ++i)
>>  +               if (joy->chans[i].channel->scan_type.storagebits != 
>> bits) {
>>  +                       dev_err(dev, "Channels must have equal 
>> storage size");
>>  +                       return -EINVAL;
>>  +               }
> 
> ...something like
> 
>   for (i = 0; joy->chans[i].indio_dev; i++) {
>     bits = joy->chans[i].channel->scan_type.storagebits;
>     if (bits ...) {
>       ...error handling...
>     }
>     if (bits != joy->chans[0].channel->scan_type.storagebits) {
>       ...second level of error handling...
>     }
>  }
> 
> ...
> 
>>  +static const struct of_device_id adc_joystick_of_match[] = {
>>  +       { .compatible = "adc-joystick", },
> 
>>  +       { },
> 
> No need comma.
> 
>>  +};
> 
> --
> With Best Regards,
> Andy Shevchenko



^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v7 1/7] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML.
  2020-05-17 19:48 [PATCH v7 1/7] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML Artur Rojek
                   ` (5 preceding siblings ...)
  2020-05-17 19:49 ` [PATCH v7 7/7] input: joystick: Add ADC attached joystick driver Artur Rojek
@ 2020-05-26 21:34 ` Rob Herring
  6 siblings, 0 replies; 13+ messages in thread
From: Rob Herring @ 2020-05-26 21:34 UTC (permalink / raw)
  To: Artur Rojek
  Cc: Rob Herring, linux-input, devicetree, Andy Shevchenko,
	Paul Cercueil, Ezequiel Garcia, linux-kernel, Dmitry Torokhov,
	Jonathan Cameron, linux-iio, Mark Rutland, Heiko Stuebner

On Sun, 17 May 2020 21:48:58 +0200, Artur Rojek wrote:
> Convert the textual documentation of Device Tree bindings for the
> Ingenic JZ47xx SoCs ADC controller to YAML.
> 
> The `interrupts` property is now explicitly listed and marked as
> required. While missing from the previous textual documentation, this
> property has been used with all the boards which probe this driver.
> 
> Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
> Tested-by: Paul Cercueil <paul@crapouillou.net>
> ---
> 
>  Changes:
> 
>  v6: new patch
> 
>  v7: - specify `maxItems: 1` for single entry properties
>      - get rid of redundant descriptions of said properties
> 
>  .../bindings/iio/adc/ingenic,adc.txt          | 49 -------------
>  .../bindings/iio/adc/ingenic,adc.yaml         | 71 +++++++++++++++++++
>  2 files changed, 71 insertions(+), 49 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, back to index

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-17 19:48 [PATCH v7 1/7] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML Artur Rojek
2020-05-17 19:48 ` [PATCH v7 2/7] IIO: Ingenic JZ47xx: Error check clk_enable calls Artur Rojek
2020-05-19 18:15   ` Jonathan Cameron
2020-05-17 19:49 ` [PATCH v7 3/7] IIO: Ingenic JZ47xx: Add xlate cb to retrieve correct channel idx Artur Rojek
2020-05-17 19:49 ` [PATCH v7 4/7] dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC Artur Rojek
2020-05-17 19:49 ` [PATCH v7 5/7] IIO: Ingenic JZ47xx: Add touchscreen mode Artur Rojek
2020-05-17 19:49 ` [PATCH v7 6/7] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek
2020-05-18 14:22   ` Rob Herring
2020-05-17 19:49 ` [PATCH v7 7/7] input: joystick: Add ADC attached joystick driver Artur Rojek
2020-05-19 18:25   ` Jonathan Cameron
2020-05-19 20:43   ` Andy Shevchenko
2020-05-19 21:02     ` Paul Cercueil
2020-05-26 21:34 ` [PATCH v7 1/7] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML Rob Herring

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git