Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] iio: cros_ec: Set Gyroscope default freuqency to 25Hz
@ 2020-07-28 18:01 Gwendal Grignou
  0 siblings, 0 replies; only message in thread
From: Gwendal Grignou @ 2020-07-28 18:01 UTC (permalink / raw)
  To: jic23, bleung, enric.balletbo; +Cc: lars, linux-iio, Gwendal Grignou

BMI160 Minimium gyroscope frequency in normal mode is 25Hz.
When older EC firmware do not report their sensors frequencies,
use 25Hz as the minimum for gyroscope to be sure it works on BMI160.

Fixes: ae7b02ad2f32d ("iio: common: cros_ec_sensors: Expose cros_ec_sensors
frequency range via iio sysfs")

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index 156848d27c473..213837c2ecee2 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -85,10 +85,13 @@ static void get_default_min_max_freq(enum motionsensor_type type,
 
 	switch (type) {
 	case MOTIONSENSE_TYPE_ACCEL:
-	case MOTIONSENSE_TYPE_GYRO:
 		*min_freq = 12500;
 		*max_freq = 100000;
 		break;
+	case MOTIONSENSE_TYPE_GYRO:
+		*min_freq = 25000;
+		*max_freq = 100000;
+		break;
 	case MOTIONSENSE_TYPE_MAG:
 		*min_freq = 5000;
 		*max_freq = 25000;
-- 
2.28.0.rc0.142.g3c755180ce-goog


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-28 18:01 [PATCH] iio: cros_ec: Set Gyroscope default freuqency to 25Hz Gwendal Grignou

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git