From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Akinobu Mita <akinobu.mita@gmail.com>
Subject: [PATCH 08/13] dt-bindings: iio: adc: ti,adc12138 yaml conversion.
Date: Sun, 9 Aug 2020 12:17:48 +0100 [thread overview]
Message-ID: <20200809111753.156236-9-jic23@kernel.org> (raw)
In-Reply-To: <20200809111753.156236-1-jic23@kernel.org>
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simple binding conversion. Only addition was #io-channel-cells to
allow for potential consumers of the channels on this device.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
---
.../bindings/iio/adc/ti,adc12138.yaml | 85 +++++++++++++++++++
.../bindings/iio/adc/ti-adc12138.txt | 37 --------
2 files changed, 85 insertions(+), 37 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
new file mode 100644
index 000000000000..3e8c43aa8ef3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc12138.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC12138 and similar self-calibrating ADCs
+
+maintainers:
+ - Akinobu Mita <akinobu.mita@gmail.com>
+
+description: |
+ 13 bit ADCs with 1, 2 or 8 inputs and self calibrating circuitry to
+ correct for linearity, zero and full scale errors.
+
+properties:
+ compatible:
+ enum:
+ - ti,adc12130
+ - ti,adc12132
+ - ti,adc12138
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description: End of Conversion (EOC) interrupt
+
+ clocks:
+ maxItems: 1
+ description: Conversion clock input.
+
+ spi-max-frequency: true
+
+ vref-p-supply:
+ description: The regulator supply for positive analog voltage reference
+
+ vref-n-suppy:
+ description: |
+ The regulator supply for negative analog voltage reference
+ (Note that this must not go below GND or exceed vref-p)
+ If not specified, this is assumed to be analog ground.
+
+ ti,acquisition-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 6, 10, 18, 34]
+ description: |
+ The number of conversion clock periods for the S/H's acquisition time.
+ For high source impedances, this value can be increased to 18 or 34.
+ For less ADC accuracy and/or slower CCLK frequencies this value may be
+ decreased to 6. See section 6.0 INPUT SOURCE RESISTANCE in the
+ datasheet for details.
+
+ "#io-channel-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - vref-p-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "ti,adc12138";
+ reg = <0>;
+ interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpio1>;
+ clocks = <&cclk>;
+ vref-p-supply = <&ldo4_reg>;
+ spi-max-frequency = <5000000>;
+ ti,acquisition-time = <6>;
+ #io-channel-cells = <1>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
deleted file mode 100644
index 049a1d36f013..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Texas Instruments' ADC12130/ADC12132/ADC12138
-
-Required properties:
- - compatible: Should be one of
- * "ti,adc12130"
- * "ti,adc12132"
- * "ti,adc12138"
- - reg: SPI chip select number for the device
- - interrupts: Should contain interrupt for EOC (end of conversion)
- - clocks: phandle to conversion clock input
- - spi-max-frequency: Definision as per
- Documentation/devicetree/bindings/spi/spi-bus.txt
- - vref-p-supply: The regulator supply for positive analog voltage reference
-
-Optional properties:
- - vref-n-supply: The regulator supply for negative analog voltage reference
- (Note that this must not go below GND or exceed vref-p)
- If not specified, this is assumed to be analog ground.
- - ti,acquisition-time: The number of conversion clock periods for the S/H's
- acquisition time. Should be one of 6, 10, 18, 34. If not specified,
- default value of 10 is used.
- For high source impedances, this value can be increased to 18 or 34.
- For less ADC accuracy and/or slower CCLK frequencies this value may be
- decreased to 6. See section 6.0 INPUT SOURCE RESISTANCE in the
- datasheet for details.
-
-Example:
-adc@0 {
- compatible = "ti,adc12138";
- reg = <0>;
- interrupts = <28 IRQ_TYPE_EDGE_RISING>;
- interrupt-parent = <&gpio1>;
- clocks = <&cclk>;
- vref-p-supply = <&ldo4_reg>;
- spi-max-frequency = <5000000>;
- ti,acquisition-time = <6>;
-};
--
2.28.0
next prev parent reply other threads:[~2020-08-09 11:20 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-09 11:17 [PATCH 00/13] dt-bindings: yaml conversions of some simple ADC bindings Jonathan Cameron
2020-08-09 11:17 ` [PATCH 01/13] dt-bindings: iio: adc: microchip,mcp3201 yaml conversion Jonathan Cameron
2020-08-18 2:24 ` Rob Herring
2020-08-30 13:25 ` Jonathan Cameron
2020-08-09 11:17 ` [PATCH 02/13] dt-bindings: trivial-devices: Add mcp342x ADCs and drop separate binding doc Jonathan Cameron
2020-08-18 2:27 ` Rob Herring
2020-08-29 17:48 ` Jonathan Cameron
2020-08-09 11:17 ` [PATCH 03/13] dt-bindings: iio: adc: ti,adc108s102 yaml conversion Jonathan Cameron
2020-08-18 2:27 ` Rob Herring
2020-08-29 17:50 ` Jonathan Cameron
2020-08-09 11:17 ` [PATCH 04/13] dt-bindings: iio: adc: lltc,ltc2497 " Jonathan Cameron
2020-08-18 2:28 ` Rob Herring
2020-08-29 17:50 ` Jonathan Cameron
2020-08-09 11:17 ` [PATCH 05/13] dt-bindings: iio: adc: ti,adc161s626 " Jonathan Cameron
2020-08-11 3:35 ` Matt Ranostay
2020-08-18 2:28 ` Rob Herring
2020-08-29 17:51 ` Jonathan Cameron
2020-08-09 11:17 ` [PATCH 06/13] dt-bindings: iio: adc: ti,adc0832 " Jonathan Cameron
2020-08-18 2:29 ` Rob Herring
2020-08-09 11:17 ` [PATCH 07/13] dt-bindings: iio: adc: ti,adc084s021 " Jonathan Cameron
2020-08-18 2:30 ` Rob Herring
2020-08-29 17:53 ` Jonathan Cameron
2020-10-27 15:28 ` Jonathan Cameron
2020-08-09 11:17 ` Jonathan Cameron [this message]
2020-08-12 16:29 ` [PATCH 08/13] dt-bindings: iio: adc: ti,adc12138 " Rob Herring
2020-08-16 9:06 ` Jonathan Cameron
2020-08-17 14:17 ` Rob Herring
2020-08-09 11:17 ` [PATCH 09/13] dt-bindings: iio: adc: ti,adc128s052 " Jonathan Cameron
2020-08-18 2:30 ` Rob Herring
2020-08-29 17:55 ` Jonathan Cameron
2020-08-09 11:17 ` [PATCH 10/13] dt-bindings: iio: adc: ti,ads7950 binding conversion Jonathan Cameron
2020-08-12 16:30 ` David Lechner
2020-08-30 15:55 ` Jonathan Cameron
2020-08-09 11:17 ` [PATCH 11/13] dt-bindings: iio: adc: ti,ads8344 yaml conversion Jonathan Cameron
2020-08-18 2:31 ` Rob Herring
2020-08-29 17:58 ` Jonathan Cameron
2020-08-09 11:17 ` [PATCH 12/13] dt-bindings: iio: adc: tlc4541 - recover accidentally dropped binding doc Jonathan Cameron
2020-08-29 17:57 ` Jonathan Cameron
2020-08-09 11:17 ` [PATCH 13/13] dt-bindings: iio: adc: ti,tlc4541 binding conversion Jonathan Cameron
2020-08-10 0:42 ` Phil Reid
2020-08-18 2:32 ` Rob Herring
2020-08-29 17:59 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200809111753.156236-9-jic23@kernel.org \
--to=jic23@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=akinobu.mita@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).