Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 0/6] iio: sx9310: Support setting various settings
@ 2020-10-07  1:17 Stephen Boyd
  2020-10-07  1:17 ` [PATCH v3 1/6] iio: sx9310: Support hardware gain factor Stephen Boyd
                   ` (6 more replies)
  0 siblings, 7 replies; 8+ messages in thread
From: Stephen Boyd @ 2020-10-07  1:17 UTC (permalink / raw)
  To: Jonathan Cameron
  Cc: linux-kernel, linux-iio, Daniel Campello, Lars-Peter Clausen,
	Peter Meerwald-Stadler, Douglas Anderson, Gwendal Grignou,
	Evan Green, Rob Herring, devicetree

I need to configure various settings such as thresholds, gain factors,
etc. on this device. Some settings matter at boot, while others can wait
for userspace to configure things. This patch series adds support to
set these various bits in the registers of this device.

Changes from v2 (https://lore.kernel.org/r/20200930075728.2410327-1-swboyd@chromium.org)
 - Rolled in a fix from Gwendal on last patch to simplify if-else logic
 - Fixed binding and picked up Rob's reviewed-by tag

Changes from v1 (https://lore.kernel.org/r/20200903221828.3657250-1-swboyd@chromium.org)
 - A bunch more patches for userspace settings
 - Removed body thresholds as they're probably not used
 - Removed compensate common as it probably doesn't matter
 - Moved thresholds, gain factor, hysteresis, debounce to userspace

Stephen Boyd (6):
  iio: sx9310: Support hardware gain factor
  iio: sx9310: Support setting proximity thresholds
  iio: sx9310: Support setting hysteresis values
  iio: sx9310: Support setting debounce values
  dt-bindings: iio: sx9310: Add various settings as DT properties
  iio: sx9310: Set various settings from DT

 .../iio/proximity/semtech,sx9310.yaml         |  63 +++
 drivers/iio/proximity/sx9310.c                | 508 +++++++++++++++++-
 2 files changed, 565 insertions(+), 6 deletions(-)

Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: <devicetree@vger.kernel.org>

base-commit: 1bebdcb928eba880f3a119bacb8149216206958a
-- 
Sent by a computer, using git, on the internet


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-07  1:17 [PATCH v3 0/6] iio: sx9310: Support setting various settings Stephen Boyd
2020-10-07  1:17 ` [PATCH v3 1/6] iio: sx9310: Support hardware gain factor Stephen Boyd
2020-10-07  1:17 ` [PATCH v3 2/6] iio: sx9310: Support setting proximity thresholds Stephen Boyd
2020-10-07  1:17 ` [PATCH v3 3/6] iio: sx9310: Support setting hysteresis values Stephen Boyd
2020-10-07  1:17 ` [PATCH v3 4/6] iio: sx9310: Support setting debounce values Stephen Boyd
2020-10-07  1:17 ` [PATCH v3 5/6] dt-bindings: iio: sx9310: Add various settings as DT properties Stephen Boyd
2020-10-07  1:17 ` [PATCH v3 6/6] iio: sx9310: Set various settings from DT Stephen Boyd
2020-10-10 16:39 ` [PATCH v3 0/6] iio: sx9310: Support setting various settings Jonathan Cameron

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git