From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Amit Kucheria <amitk@kernel.org>,
Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, linux-iio@vger.kernel.org,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Jishnu Prakash <jprakash@qti.qualcomm.com>
Subject: [PATCH v8 10/11] arm64: dts: sm8250-mtp: add thermal zones using pmic's adc-tm5
Date: Fri, 9 Oct 2020 18:44:58 +0300 [thread overview]
Message-ID: <20201009154459.106189-11-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20201009154459.106189-1-dmitry.baryshkov@linaro.org>
Port thermal zones definitions from msm-4.19 tree. Enable and add
channel configuration to PMIC's ADC-TM definitions. Declare thermal
zones and respective trip points.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 207 ++++++++++++++++++++++++
1 file changed, 207 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 98675e1f8204..95050f7d11f2 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -24,6 +24,104 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ thermal-zones {
+ xo-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 0>;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ skin-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 1>;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ mmw-pa1 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ conn-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150b_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ camera-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ skin-msm-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ mmw-pa2 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
@@ -378,6 +476,115 @@ &i2c15 {
/* rtc6226 @ 64 */
};
+&pm8150_adc {
+ xo-therm@4c {
+ reg = <ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ skin-therm@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ pa-therm1@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150b_adc {
+ conn-therm@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150l_adc {
+ camera-flash-therm@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ skin-msm-therm@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ pa-therm2@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150_adc_tm {
+ status = "okay";
+
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ skin-therm@1 {
+ reg = <1>;
+ io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pa-therm1@2 {
+ reg = <2>;
+ io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm8150b_adc_tm {
+ status = "okay";
+
+ conn-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm8150l_adc_tm {
+ status = "okay";
+
+ camera-flash-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ skin-msm-therm@1 {
+ reg = <1>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pa-therm2@2 {
+ reg = <2>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
--
2.28.0
next prev parent reply other threads:[~2020-10-09 15:45 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-09 15:44 [PATCH v8 00/11] qcom: pm8150: add support for thermal monitoring Dmitry Baryshkov
2020-10-09 15:44 ` [PATCH v8 01/11] dt-bindings: thermal: qcom: add adc-thermal monitor bindings Dmitry Baryshkov
2020-10-09 15:44 ` [PATCH v8 02/11] fixp-arith: add a linear interpolation function Dmitry Baryshkov
2020-10-09 15:44 ` [PATCH v8 03/11] iio: adc: qcom-vadc: move several adc5 functions to common file Dmitry Baryshkov
2020-10-09 15:44 ` [PATCH v8 04/11] iio: adc: qcom-vadc-common: use fixp_linear_interpolate Dmitry Baryshkov
2020-10-09 15:44 ` [PATCH v8 05/11] iio: adc: move qcom-vadc-common.h to include dir Dmitry Baryshkov
2020-10-09 15:44 ` [PATCH v8 06/11] iio: adc: qcom-spmi-adc5: use of_device_get_match_data Dmitry Baryshkov
2020-10-09 15:44 ` [PATCH v8 07/11] iio: provide of_iio_channel_get_by_name() and devm_ version it Dmitry Baryshkov
2020-10-09 15:44 ` [PATCH v8 08/11] thermal: qcom: add support for adc-tm5 PMIC thermal monitor Dmitry Baryshkov
2020-10-14 16:32 ` mka
2020-10-09 15:44 ` [PATCH v8 09/11] arm64: dts: qcom: pm8150x: add definitions for adc-tm5 part Dmitry Baryshkov
2020-10-09 15:44 ` Dmitry Baryshkov [this message]
2020-10-09 15:44 ` [PATCH v8 11/11] arm64: dts: qrb5165-rb5: port thermal zone definitions Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201009154459.106189-11-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=amitk@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=jprakash@qti.qualcomm.com \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).