From: Stephan Gerhold <stephan@gerhold.net>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Peter Meerwald <pmeerw@pmeerw.net>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
Bastien Nocera <hadess@hadess.net>,
Hans de Goede <hdegoede@redhat.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
~postmarketos/upstreaming@lists.sr.ht,
Stephan Gerhold <stephan@gerhold.net>
Subject: [PATCH v2 0/9] iio: accel: bmc150: Add support for BMA253/BMA254
Date: Thu, 10 Jun 2021 14:21:17 +0200 [thread overview]
Message-ID: <20210610122126.50504-1-stephan@gerhold.net> (raw)
The Bosch BMA253 accelerometer is very similar to both BMA254 and BMA255.
The current situation is very confusing: BMA254 is supported by the bma180
driver, but BMA255 is supported by the bmc150-accel driver.
It turns out the bma180 and bmc150-accel drivers have quite some overlap,
and BMA253/BMA254 would be a bit better supported in bmc150-accel
(which has support for the motion trigger/interrupt).
This series adds BMA253 support to bmc150-accel and also moves BMA254
over to bmc150, removing some unnecessary code from the bma180 driver.
In v2 I also sneaked in a small fix for the scale table of BMA222
to simplify backporting for the stable people.
---
Changes in v2:
- Add new "iio: accel: bmc150: Fix bma222 scale unit" patch at the
beginning so the stable people can backport it without conflicts
- Add Reviewed-by: from Hans and Andy for all previous patches
- Add patch 3 and 4 to have all the chip lists in a consistent order
- Fix last patch to also drop BMA254 from the file header in bma180.c
v1: https://lore.kernel.org/linux-iio/20210610095300.3613-1-stephan@gerhold.net/
Stephan Gerhold (9):
iio: accel: bmc150: Fix bma222 scale unit
iio: accel: bmc150: Drop misleading/duplicate chip identifiers
iio: accel: bmc150: Drop duplicated documentation of supported chips
iio: accel: bmc150: Sort all chip names alphabetically / by chip ID
dt-bindings: iio: accel: bma255: Document bosch,bma253
iio: accel: bmc150: Add device IDs for BMA253
dt-bindings: iio: bma255: Allow multiple interrupts
dt-bindings: iio: accel: bma180/bma255: Move bma254 to bma255 schema
iio: accel: bma180/bmc150: Move BMA254 to bmc150-accel driver
.../bindings/iio/accel/bosch,bma180.yaml | 3 +-
.../bindings/iio/accel/bosch,bma255.yaml | 9 +-
drivers/iio/accel/Kconfig | 8 +-
drivers/iio/accel/bma180.c | 92 +++----------------
drivers/iio/accel/bmc150-accel-core.c | 87 ++++++------------
drivers/iio/accel/bmc150-accel-i2c.c | 52 +++++------
drivers/iio/accel/bmc150-accel-spi.c | 31 ++++---
drivers/iio/accel/bmc150-accel.h | 10 --
8 files changed, 95 insertions(+), 197 deletions(-)
--
2.32.0
next reply other threads:[~2021-06-10 12:24 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-10 12:21 Stephan Gerhold [this message]
2021-06-10 12:21 ` [PATCH v2 1/9] iio: accel: bmc150: Fix bma222 scale unit Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 2/9] iio: accel: bmc150: Drop misleading/duplicate chip identifiers Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 3/9] iio: accel: bmc150: Drop duplicated documentation of supported chips Stephan Gerhold
2021-06-10 12:45 ` Andy Shevchenko
2021-06-10 12:48 ` Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 4/9] iio: accel: bmc150: Sort all chip names alphabetically / by chip ID Stephan Gerhold
2021-06-10 12:50 ` Andy Shevchenko
2021-06-10 13:00 ` Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 5/9] dt-bindings: iio: accel: bma255: Document bosch,bma253 Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 6/9] iio: accel: bmc150: Add device IDs for BMA253 Stephan Gerhold
2021-06-10 12:51 ` Andy Shevchenko
2021-06-10 13:02 ` Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 7/9] dt-bindings: iio: bma255: Allow multiple interrupts Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 8/9] dt-bindings: iio: accel: bma180/bma255: Move bma254 to bma255 schema Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 9/9] iio: accel: bma180/bmc150: Move BMA254 to bmc150-accel driver Stephan Gerhold
2021-06-10 12:54 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210610122126.50504-1-stephan@gerhold.net \
--to=stephan@gerhold.net \
--cc=andy.shevchenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=hadess@hadess.net \
--cc=hdegoede@redhat.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).