[PATCH v5 0/3] iio: vcnl3020: add periodic mode, threshold options

[PATCH v5 0/3] iio: vcnl3020: add periodic mode, threshold options

[Ivan Mikhaylov]

Add periodic mode enablement, high/low threshold options.

Changes from v1:
 1. Remove changes for hwmon driver and changes affecting
vcnl3020 data structure.
 2. Add enable/disable periodic mode functions.

Changes from v2:
 1. Minor fixes from Jonathan's comments.

Changes from v3:
 1. add DMA safe buffer in vcnl3020_data and use it on bulk_read/write
    calls
 2. put vcnl3020_is_in_periodic_mode in vcnl3020_measure_proximity and
    vcnl3020_write_proxy_samp_freq
 3. add mutex instead of iio_claim in vcnl3020_write_proxy_samp_freq
 4. out_mutex -> err_unlock

Changes from v4:
 1. split into 3 patches - DMA safe buffer, periodic mode, change
    iio_claim/release on mutex.
 2. add dev_err for regmap_read/write

Ivan Mikhaylov (3):
  iio: proximity: vcnl3020: add DMA safe buffer
  iio: proximity: vcnl3020: add periodic mode
  iio: proximity: vcnl3020: remove iio_claim/release_direct

 drivers/iio/proximity/vcnl3020.c | 354 +++++++++++++++++++++++++++++--
 1 file changed, 338 insertions(+), 16 deletions(-)

-- 
2.31.1

[PATCH v5 1/3] iio: proximity: vcnl3020: add DMA safe buffer

[Ivan Mikhaylov]

Add DMA safe buffer for bulk transfers.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
---
 drivers/iio/proximity/vcnl3020.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/proximity/vcnl3020.c b/drivers/iio/proximity/vcnl3020.c
index 43817f6b3086..c90f9c6e9e97 100644
--- a/drivers/iio/proximity/vcnl3020.c
+++ b/drivers/iio/proximity/vcnl3020.c
@@ -57,12 +57,14 @@ static const int vcnl3020_prox_sampling_frequency[][2] = {
  * @dev:	vcnl3020 device.
  * @rev:	revision id.
  * @lock:	lock for protecting access to device hardware registers.
+ * @buf:	DMA safe __be16 buffer.
  */
 struct vcnl3020_data {
 	struct regmap *regmap;
 	struct device *dev;
 	u8 rev;
 	struct mutex lock;
+	__be16 buf ____cacheline_aligned;
 };
 
 /**
@@ -144,7 +146,6 @@ static int vcnl3020_measure_proximity(struct vcnl3020_data *data, int *val)
 {
 	int rc;
 	unsigned int reg;
-	__be16 res;
 
 	mutex_lock(&data->lock);
 
@@ -163,12 +164,12 @@ static int vcnl3020_measure_proximity(struct vcnl3020_data *data, int *val)
 	}
 
 	/* high & low result bytes read */
-	rc = regmap_bulk_read(data->regmap, VCNL_PS_RESULT_HI, &res,
-			      sizeof(res));
+	rc = regmap_bulk_read(data->regmap, VCNL_PS_RESULT_HI, &data->buf,
+			      sizeof(data->buf));
 	if (rc)
 		goto err_unlock;
 
-	*val = be16_to_cpu(res);
+	*val = be16_to_cpu(data->buf);
 
 err_unlock:
 	mutex_unlock(&data->lock);
-- 
2.31.1

[PATCH v5 2/3] iio: proximity: vcnl3020: add periodic mode

[Ivan Mikhaylov]

Add the possibility to run proximity sensor in periodic measurement
mode with thresholds.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
---
 drivers/iio/proximity/vcnl3020.c | 318 ++++++++++++++++++++++++++++++-
 1 file changed, 315 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/proximity/vcnl3020.c b/drivers/iio/proximity/vcnl3020.c
index c90f9c6e9e97..6d724657677a 100644
--- a/drivers/iio/proximity/vcnl3020.c
+++ b/drivers/iio/proximity/vcnl3020.c
@@ -2,8 +2,6 @@
 /*
  * Support for Vishay VCNL3020 proximity sensor on i2c bus.
  * Based on Vishay VCNL4000 driver code.
- *
- * TODO: interrupts.
  */
 
 #include <linux/module.h>
@@ -11,9 +9,10 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/regmap.h>
+#include <linux/interrupt.h>
 
 #include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 
 #define VCNL3020_PROD_ID	0x21
 
@@ -37,6 +36,21 @@
 					* measurement
 					*/
 
+/* Enables periodic proximity measurement */
+#define VCNL_PS_EN		BIT(1)
+
+/* Enables state machine and LP oscillator for self timed  measurements */
+#define VCNL_PS_SELFTIMED_EN	BIT(0)
+
+/* Bit masks for ICR */
+
+/* Enable interrupts on low or high thresholds */
+#define  VCNL_ICR_THRES_EN	BIT(1)
+
+/* Bit masks for ISR */
+#define VCNL_INT_TH_HI		BIT(0)	/* High threshold hit */
+#define VCNL_INT_TH_LOW		BIT(1)	/* Low threshold hit */
+
 #define VCNL_ON_DEMAND_TIMEOUT_US	100000
 #define VCNL_POLL_US			20000
 
@@ -142,6 +156,21 @@ static int vcnl3020_init(struct vcnl3020_data *data)
 					       vcnl3020_led_current_property);
 };
 
+static bool vcnl3020_is_in_periodic_mode(struct vcnl3020_data *data)
+{
+	int rc;
+	unsigned int cmd;
+
+	rc = regmap_read(data->regmap, VCNL_COMMAND, &cmd);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) reading command register\n", rc);
+		return false;
+	}
+
+	return !!(cmd & VCNL_PS_SELFTIMED_EN);
+}
+
 static int vcnl3020_measure_proximity(struct vcnl3020_data *data, int *val)
 {
 	int rc;
@@ -149,6 +178,12 @@ static int vcnl3020_measure_proximity(struct vcnl3020_data *data, int *val)
 
 	mutex_lock(&data->lock);
 
+	/* Protect against event capture. */
+	if (vcnl3020_is_in_periodic_mode(data)) {
+		rc = -EBUSY;
+		goto err_unlock;
+	}
+
 	rc = regmap_write(data->regmap, VCNL_COMMAND, VCNL_PS_OD);
 	if (rc)
 		goto err_unlock;
@@ -202,6 +237,10 @@ static int vcnl3020_write_proxy_samp_freq(struct vcnl3020_data *data, int val,
 	unsigned int i;
 	int index = -1;
 
+	/* Protect against event capture. */
+	if (vcnl3020_is_in_periodic_mode(data))
+		return -EBUSY;
+
 	for (i = 0; i < ARRAY_SIZE(vcnl3020_prox_sampling_frequency); i++) {
 		if (val == vcnl3020_prox_sampling_frequency[i][0] &&
 		    val2 == vcnl3020_prox_sampling_frequency[i][1]) {
@@ -216,12 +255,234 @@ static int vcnl3020_write_proxy_samp_freq(struct vcnl3020_data *data, int val,
 	return regmap_write(data->regmap, VCNL_PROXIMITY_RATE, index);
 }
 
+static bool vcnl3020_is_thr_enabled(struct vcnl3020_data *data)
+{
+	int rc;
+	unsigned int icr;
+
+	rc = regmap_read(data->regmap, VCNL_PS_ICR, &icr);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) reading ICR register\n", rc);
+		return false;
+	}
+
+	return !!(icr & VCNL_ICR_THRES_EN);
+}
+
+static int vcnl3020_read_event(struct iio_dev *indio_dev,
+			       const struct iio_chan_spec *chan,
+			       enum iio_event_type type,
+			       enum iio_event_direction dir,
+			       enum iio_event_info info,
+			       int *val, int *val2)
+{
+	int rc;
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			rc = regmap_bulk_read(data->regmap, VCNL_PS_HI_THR_HI,
+					      &data->buf, sizeof(data->buf));
+			if (rc < 0)
+				return rc;
+			*val = be16_to_cpu(data->buf);
+			return IIO_VAL_INT;
+		case IIO_EV_DIR_FALLING:
+			rc = regmap_bulk_read(data->regmap, VCNL_PS_LO_THR_HI,
+					      &data->buf, sizeof(data->buf));
+			if (rc < 0)
+				return rc;
+			*val = be16_to_cpu(data->buf);
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl3020_write_event(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info,
+				int val, int val2)
+{
+	int rc;
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->lock);
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			/* 16 bit word/ low * high */
+			data->buf = cpu_to_be16(val);
+			rc = regmap_bulk_write(data->regmap, VCNL_PS_HI_THR_HI,
+					       &data->buf, sizeof(data->buf));
+			if (rc < 0)
+				goto err_unlock;
+			rc = IIO_VAL_INT;
+			goto err_unlock;
+		case IIO_EV_DIR_FALLING:
+			data->buf = cpu_to_be16(val);
+			rc = regmap_bulk_write(data->regmap, VCNL_PS_LO_THR_HI,
+					       &data->buf, sizeof(data->buf));
+			if (rc < 0)
+				goto err_unlock;
+			rc = IIO_VAL_INT;
+			goto err_unlock;
+		default:
+			rc = -EINVAL;
+			goto err_unlock;
+		}
+	default:
+		rc = -EINVAL;
+		goto err_unlock;
+	}
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return rc;
+}
+
+static int vcnl3020_enable_periodic(struct iio_dev *indio_dev,
+				    struct vcnl3020_data *data)
+{
+	int rc;
+	int cmd;
+
+	mutex_lock(&data->lock);
+
+	/* Enable periodic measurement of proximity data. */
+	cmd = VCNL_PS_EN | VCNL_PS_SELFTIMED_EN;
+
+	rc = regmap_write(data->regmap, VCNL_COMMAND, cmd);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) writing command register\n", rc);
+		goto err_unlock;
+	}
+
+	/*
+	 * Enable interrupts on threshold, for proximity data by
+	 * default.
+	 */
+	rc = regmap_write(data->regmap, VCNL_PS_ICR, VCNL_ICR_THRES_EN);
+	if (rc)
+		dev_err(data->dev,
+			"Error (%d) reading ICR register\n", rc);
+
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return rc;
+}
+
+static int vcnl3020_disable_periodic(struct iio_dev *indio_dev,
+				     struct vcnl3020_data *data)
+{
+	int rc;
+
+	mutex_lock(&data->lock);
+
+	rc = regmap_write(data->regmap, VCNL_COMMAND, 0);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) writing command register\n", rc);
+		goto err_unlock;
+	}
+
+	rc = regmap_write(data->regmap, VCNL_PS_ICR, 0);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) writing ICR register\n", rc);
+		goto err_unlock;
+	}
+
+	/* Clear interrupt flag bit */
+	rc = regmap_write(data->regmap, VCNL_ISR, 0);
+	if (rc)
+		dev_err(data->dev,
+			"Error (%d) writing ISR register\n", rc);
+
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return rc;
+}
+
+static int vcnl3020_config_threshold(struct iio_dev *indio_dev, bool state)
+{
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+
+	if (state) {
+		return vcnl3020_enable_periodic(indio_dev, data);
+	} else {
+		if (!vcnl3020_is_thr_enabled(data))
+			return 0;
+		return vcnl3020_disable_periodic(indio_dev, data);
+	}
+}
+
+static int vcnl3020_write_event_config(struct iio_dev *indio_dev,
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir,
+				       int state)
+{
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		return vcnl3020_config_threshold(indio_dev, state);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl3020_read_event_config(struct iio_dev *indio_dev,
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir)
+{
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		return vcnl3020_is_thr_enabled(data);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_event_spec vcnl3020_event_spec[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
 static const struct iio_chan_spec vcnl3020_channels[] = {
 	{
 		.type = IIO_PROXIMITY,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 				      BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.event_spec = vcnl3020_event_spec,
+		.num_event_specs = ARRAY_SIZE(vcnl3020_event_spec),
 	},
 };
 
@@ -288,6 +549,10 @@ static const struct iio_info vcnl3020_info = {
 	.read_raw = vcnl3020_read_raw,
 	.write_raw = vcnl3020_write_raw,
 	.read_avail = vcnl3020_read_avail,
+	.read_event_value = vcnl3020_read_event,
+	.write_event_value = vcnl3020_write_event,
+	.read_event_config = vcnl3020_read_event_config,
+	.write_event_config = vcnl3020_write_event_config,
 };
 
 static const struct regmap_config vcnl3020_regmap_config = {
@@ -296,6 +561,40 @@ static const struct regmap_config vcnl3020_regmap_config = {
 	.max_register	= VCNL_PS_MOD_ADJ,
 };
 
+static irqreturn_t vcnl3020_handle_irq_thread(int irq, void *p)
+{
+	struct iio_dev *indio_dev = p;
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+	unsigned int isr;
+	int rc;
+
+	rc = regmap_read(data->regmap, VCNL_ISR, &isr);
+	if (rc) {
+		dev_err(data->dev, "Error (%d) reading reg (0x%x)\n",
+			rc, VCNL_ISR);
+		return IRQ_HANDLED;
+	}
+
+	if (isr & VCNL_ICR_THRES_EN) {
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY,
+						    1,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_RISING),
+			       iio_get_time_ns(indio_dev));
+
+		rc = regmap_write(data->regmap, VCNL_ISR,
+				  isr & VCNL_ICR_THRES_EN);
+		if (rc)
+			dev_err(data->dev, "Error (%d) writing in reg (0x%x)\n",
+				rc, VCNL_ISR);
+	} else {
+		return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+}
+
 static int vcnl3020_probe(struct i2c_client *client)
 {
 	struct vcnl3020_data *data;
@@ -328,6 +627,19 @@ static int vcnl3020_probe(struct i2c_client *client)
 	indio_dev->name = "vcnl3020";
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
+	if (client->irq) {
+		rc = devm_request_threaded_irq(&client->dev, client->irq,
+					       NULL, vcnl3020_handle_irq_thread,
+					       IRQF_ONESHOT, indio_dev->name,
+					       indio_dev);
+		if (rc) {
+			dev_err(&client->dev,
+				"Error (%d) irq request failed (%u)\n", rc,
+				client->irq);
+			return rc;
+		}
+	}
+
 	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
-- 
2.31.1

[PATCH v5 3/3] iio: proximity: vcnl3020: remove iio_claim/release_direct

[Ivan Mikhaylov]

Remove iio_claim/release and change it on mutex accordingly in
vcnl3020_write_proxy_samp_freq.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
---
 drivers/iio/proximity/vcnl3020.c | 33 ++++++++++++++++++++------------
 1 file changed, 21 insertions(+), 12 deletions(-)

diff --git a/drivers/iio/proximity/vcnl3020.c b/drivers/iio/proximity/vcnl3020.c
index 6d724657677a..6a3b59e1a6f6 100644
--- a/drivers/iio/proximity/vcnl3020.c
+++ b/drivers/iio/proximity/vcnl3020.c
@@ -236,10 +236,15 @@ static int vcnl3020_write_proxy_samp_freq(struct vcnl3020_data *data, int val,
 {
 	unsigned int i;
 	int index = -1;
+	int rc;
+
+	mutex_lock(&data->lock);
 
 	/* Protect against event capture. */
-	if (vcnl3020_is_in_periodic_mode(data))
-		return -EBUSY;
+	if (vcnl3020_is_in_periodic_mode(data)) {
+		rc = -EBUSY;
+		goto err_unlock;
+	}
 
 	for (i = 0; i < ARRAY_SIZE(vcnl3020_prox_sampling_frequency); i++) {
 		if (val == vcnl3020_prox_sampling_frequency[i][0] &&
@@ -249,10 +254,20 @@ static int vcnl3020_write_proxy_samp_freq(struct vcnl3020_data *data, int val,
 		}
 	}
 
-	if (index < 0)
-		return -EINVAL;
+	if (index < 0) {
+		rc = -EINVAL;
+		goto err_unlock;
+	}
 
-	return regmap_write(data->regmap, VCNL_PROXIMITY_RATE, index);
+	rc = regmap_write(data->regmap, VCNL_PROXIMITY_RATE, index);
+	if (rc)
+		dev_err(data->dev,
+			"Error (%d) writing proximity rate register\n", rc);
+
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return rc;
 }
 
 static bool vcnl3020_is_thr_enabled(struct vcnl3020_data *data)
@@ -513,17 +528,11 @@ static int vcnl3020_write_raw(struct iio_dev *indio_dev,
 			      struct iio_chan_spec const *chan,
 			      int val, int val2, long mask)
 {
-	int rc;
 	struct vcnl3020_data *data = iio_priv(indio_dev);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		rc = iio_device_claim_direct_mode(indio_dev);
-		if (rc)
-			return rc;
-		rc = vcnl3020_write_proxy_samp_freq(data, val, val2);
-		iio_device_release_direct_mode(indio_dev);
-		return rc;
+		return vcnl3020_write_proxy_samp_freq(data, val, val2);
 	default:
 		return -EINVAL;
 	}
-- 
2.31.1

Re: [PATCH v5 2/3] iio: proximity: vcnl3020: add periodic mode

[Jonathan Cameron]

On Thu, 22 Jul 2021 18:44:19 +0300
Ivan Mikhaylov <i.mikhaylov@yadro.com> wrote:

> Add the possibility to run proximity sensor in periodic measurement
> mode with thresholds.
> 
> Reported-by: kernel test robot <lkp@intel.com> 

A reported by in a patch that isn't obviously a fix should really have
a comment to explain what was reported.  It definitely wasn't the lack
of interrupt support in the driver! Assuming I take this without a v6
I'll add a note that it was a repeated include.

> Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
> ---
>  drivers/iio/proximity/vcnl3020.c | 318 ++++++++++++++++++++++++++++++-
>  1 file changed, 315 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iio/proximity/vcnl3020.c b/drivers/iio/proximity/vcnl3020.c
> index c90f9c6e9e97..6d724657677a 100644
> --- a/drivers/iio/proximity/vcnl3020.c
> +++ b/drivers/iio/proximity/vcnl3020.c
> @@ -2,8 +2,6 @@
>  /*
>   * Support for Vishay VCNL3020 proximity sensor on i2c bus.
>   * Based on Vishay VCNL4000 driver code.
> - *
> - * TODO: interrupts.
>   */
>  
>  #include <linux/module.h>
> @@ -11,9 +9,10 @@
>  #include <linux/err.h>
>  #include <linux/delay.h>
>  #include <linux/regmap.h>
> +#include <linux/interrupt.h>
>  
>  #include <linux/iio/iio.h>
> -#include <linux/iio/sysfs.h>
> +#include <linux/iio/events.h>
>  
>  #define VCNL3020_PROD_ID	0x21
>  
> @@ -37,6 +36,21 @@
>  					* measurement
>  					*/
>  
> +/* Enables periodic proximity measurement */
> +#define VCNL_PS_EN		BIT(1)
> +
> +/* Enables state machine and LP oscillator for self timed  measurements */
> +#define VCNL_PS_SELFTIMED_EN	BIT(0)
> +
> +/* Bit masks for ICR */
> +
> +/* Enable interrupts on low or high thresholds */
> +#define  VCNL_ICR_THRES_EN	BIT(1)
> +
> +/* Bit masks for ISR */
> +#define VCNL_INT_TH_HI		BIT(0)	/* High threshold hit */
> +#define VCNL_INT_TH_LOW		BIT(1)	/* Low threshold hit */
> +
>  #define VCNL_ON_DEMAND_TIMEOUT_US	100000
>  #define VCNL_POLL_US			20000
>  
> @@ -142,6 +156,21 @@ static int vcnl3020_init(struct vcnl3020_data *data)
>  					       vcnl3020_led_current_property);
>  };
>  
> +static bool vcnl3020_is_in_periodic_mode(struct vcnl3020_data *data)
> +{
> +	int rc;
> +	unsigned int cmd;
> +
> +	rc = regmap_read(data->regmap, VCNL_COMMAND, &cmd);
> +	if (rc) {
> +		dev_err(data->dev,
> +			"Error (%d) reading command register\n", rc);
> +		return false;
> +	}
> +
> +	return !!(cmd & VCNL_PS_SELFTIMED_EN);
> +}
> +
>  static int vcnl3020_measure_proximity(struct vcnl3020_data *data, int *val)
>  {
>  	int rc;
> @@ -149,6 +178,12 @@ static int vcnl3020_measure_proximity(struct vcnl3020_data *data, int *val)
>  
>  	mutex_lock(&data->lock);
>  
> +	/* Protect against event capture. */
> +	if (vcnl3020_is_in_periodic_mode(data)) {
> +		rc = -EBUSY;
> +		goto err_unlock;
> +	}
> +
>  	rc = regmap_write(data->regmap, VCNL_COMMAND, VCNL_PS_OD);
>  	if (rc)
>  		goto err_unlock;
> @@ -202,6 +237,10 @@ static int vcnl3020_write_proxy_samp_freq(struct vcnl3020_data *data, int val,
>  	unsigned int i;
>  	int index = -1;
>  
> +	/* Protect against event capture. */
> +	if (vcnl3020_is_in_periodic_mode(data))
> +		return -EBUSY;
> +
>  	for (i = 0; i < ARRAY_SIZE(vcnl3020_prox_sampling_frequency); i++) {
>  		if (val == vcnl3020_prox_sampling_frequency[i][0] &&
>  		    val2 == vcnl3020_prox_sampling_frequency[i][1]) {
> @@ -216,12 +255,234 @@ static int vcnl3020_write_proxy_samp_freq(struct vcnl3020_data *data, int val,
>  	return regmap_write(data->regmap, VCNL_PROXIMITY_RATE, index);
>  }
>  
> +static bool vcnl3020_is_thr_enabled(struct vcnl3020_data *data)
> +{
> +	int rc;
> +	unsigned int icr;
> +
> +	rc = regmap_read(data->regmap, VCNL_PS_ICR, &icr);
> +	if (rc) {
> +		dev_err(data->dev,
> +			"Error (%d) reading ICR register\n", rc);
> +		return false;
> +	}
> +
> +	return !!(icr & VCNL_ICR_THRES_EN);
> +}
> +
> +static int vcnl3020_read_event(struct iio_dev *indio_dev,
> +			       const struct iio_chan_spec *chan,
> +			       enum iio_event_type type,
> +			       enum iio_event_direction dir,
> +			       enum iio_event_info info,
> +			       int *val, int *val2)
> +{
> +	int rc;
> +	struct vcnl3020_data *data = iio_priv(indio_dev);
> +
> +	switch (info) {
> +	case IIO_EV_INFO_VALUE:
> +		switch (dir) {
> +		case IIO_EV_DIR_RISING:
> +			rc = regmap_bulk_read(data->regmap, VCNL_PS_HI_THR_HI,
> +					      &data->buf, sizeof(data->buf));
> +			if (rc < 0)
> +				return rc;
> +			*val = be16_to_cpu(data->buf);
> +			return IIO_VAL_INT;
> +		case IIO_EV_DIR_FALLING:
> +			rc = regmap_bulk_read(data->regmap, VCNL_PS_LO_THR_HI,
> +					      &data->buf, sizeof(data->buf));
> +			if (rc < 0)
> +				return rc;
> +			*val = be16_to_cpu(data->buf);
> +			return IIO_VAL_INT;
> +		default:
> +			return -EINVAL;
> +		}
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int vcnl3020_write_event(struct iio_dev *indio_dev,
> +				const struct iio_chan_spec *chan,
> +				enum iio_event_type type,
> +				enum iio_event_direction dir,
> +				enum iio_event_info info,
> +				int val, int val2)
> +{
> +	int rc;
> +	struct vcnl3020_data *data = iio_priv(indio_dev);
> +
> +	mutex_lock(&data->lock);
> +
> +	switch (info) {
> +	case IIO_EV_INFO_VALUE:
> +		switch (dir) {
> +		case IIO_EV_DIR_RISING:
> +			/* 16 bit word/ low * high */
> +			data->buf = cpu_to_be16(val);
> +			rc = regmap_bulk_write(data->regmap, VCNL_PS_HI_THR_HI,
> +					       &data->buf, sizeof(data->buf));
> +			if (rc < 0)
> +				goto err_unlock;
> +			rc = IIO_VAL_INT;
> +			goto err_unlock;
> +		case IIO_EV_DIR_FALLING:
> +			data->buf = cpu_to_be16(val);
> +			rc = regmap_bulk_write(data->regmap, VCNL_PS_LO_THR_HI,
> +					       &data->buf, sizeof(data->buf));
> +			if (rc < 0)
> +				goto err_unlock;
> +			rc = IIO_VAL_INT;
> +			goto err_unlock;
> +		default:
> +			rc = -EINVAL;
> +			goto err_unlock;
> +		}
> +	default:
> +		rc = -EINVAL;
> +		goto err_unlock;
> +	}
> +err_unlock:
> +	mutex_unlock(&data->lock);
> +
> +	return rc;
> +}
> +
> +static int vcnl3020_enable_periodic(struct iio_dev *indio_dev,
> +				    struct vcnl3020_data *data)
> +{
> +	int rc;
> +	int cmd;
> +
> +	mutex_lock(&data->lock);
> +
> +	/* Enable periodic measurement of proximity data. */
> +	cmd = VCNL_PS_EN | VCNL_PS_SELFTIMED_EN;
> +
> +	rc = regmap_write(data->regmap, VCNL_COMMAND, cmd);
> +	if (rc) {
> +		dev_err(data->dev,
> +			"Error (%d) writing command register\n", rc);
> +		goto err_unlock;
> +	}
> +
> +	/*
> +	 * Enable interrupts on threshold, for proximity data by
> +	 * default.
> +	 */
> +	rc = regmap_write(data->regmap, VCNL_PS_ICR, VCNL_ICR_THRES_EN);
> +	if (rc)
> +		dev_err(data->dev,
> +			"Error (%d) reading ICR register\n", rc);
> +
> +err_unlock:
> +	mutex_unlock(&data->lock);
> +
> +	return rc;
> +}
> +
> +static int vcnl3020_disable_periodic(struct iio_dev *indio_dev,
> +				     struct vcnl3020_data *data)
> +{
> +	int rc;
> +
> +	mutex_lock(&data->lock);
> +
> +	rc = regmap_write(data->regmap, VCNL_COMMAND, 0);
> +	if (rc) {
> +		dev_err(data->dev,
> +			"Error (%d) writing command register\n", rc);
> +		goto err_unlock;
> +	}
> +
> +	rc = regmap_write(data->regmap, VCNL_PS_ICR, 0);
> +	if (rc) {
> +		dev_err(data->dev,
> +			"Error (%d) writing ICR register\n", rc);
> +		goto err_unlock;
> +	}
> +
> +	/* Clear interrupt flag bit */
> +	rc = regmap_write(data->regmap, VCNL_ISR, 0);
> +	if (rc)
> +		dev_err(data->dev,
> +			"Error (%d) writing ISR register\n", rc);
> +
> +err_unlock:
> +	mutex_unlock(&data->lock);
> +
> +	return rc;
> +}
> +
> +static int vcnl3020_config_threshold(struct iio_dev *indio_dev, bool state)
> +{
> +	struct vcnl3020_data *data = iio_priv(indio_dev);
> +
> +	if (state) {
> +		return vcnl3020_enable_periodic(indio_dev, data);
> +	} else {
> +		if (!vcnl3020_is_thr_enabled(data))
> +			return 0;
> +		return vcnl3020_disable_periodic(indio_dev, data);
> +	}
> +}
> +
> +static int vcnl3020_write_event_config(struct iio_dev *indio_dev,
> +				       const struct iio_chan_spec *chan,
> +				       enum iio_event_type type,
> +				       enum iio_event_direction dir,
> +				       int state)
> +{
> +	switch (chan->type) {
> +	case IIO_PROXIMITY:
> +		return vcnl3020_config_threshold(indio_dev, state);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int vcnl3020_read_event_config(struct iio_dev *indio_dev,
> +				      const struct iio_chan_spec *chan,
> +				      enum iio_event_type type,
> +				      enum iio_event_direction dir)
> +{
> +	struct vcnl3020_data *data = iio_priv(indio_dev);
> +
> +	switch (chan->type) {
> +	case IIO_PROXIMITY:
> +		return vcnl3020_is_thr_enabled(data);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static const struct iio_event_spec vcnl3020_event_spec[] = {
> +	{
> +		.type = IIO_EV_TYPE_THRESH,
> +		.dir = IIO_EV_DIR_RISING,
> +		.mask_separate = BIT(IIO_EV_INFO_VALUE),
> +	}, {
> +		.type = IIO_EV_TYPE_THRESH,
> +		.dir = IIO_EV_DIR_FALLING,
> +		.mask_separate = BIT(IIO_EV_INFO_VALUE),
> +	}, {
> +		.type = IIO_EV_TYPE_THRESH,
> +		.dir = IIO_EV_DIR_EITHER,
> +		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
> +	},
> +};
> +
>  static const struct iio_chan_spec vcnl3020_channels[] = {
>  	{
>  		.type = IIO_PROXIMITY,
>  		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>  				      BIT(IIO_CHAN_INFO_SAMP_FREQ),
>  		.info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> +		.event_spec = vcnl3020_event_spec,
> +		.num_event_specs = ARRAY_SIZE(vcnl3020_event_spec),
>  	},
>  };
>  
> @@ -288,6 +549,10 @@ static const struct iio_info vcnl3020_info = {
>  	.read_raw = vcnl3020_read_raw,
>  	.write_raw = vcnl3020_write_raw,
>  	.read_avail = vcnl3020_read_avail,
> +	.read_event_value = vcnl3020_read_event,
> +	.write_event_value = vcnl3020_write_event,
> +	.read_event_config = vcnl3020_read_event_config,
> +	.write_event_config = vcnl3020_write_event_config,
>  };
>  
>  static const struct regmap_config vcnl3020_regmap_config = {
> @@ -296,6 +561,40 @@ static const struct regmap_config vcnl3020_regmap_config = {
>  	.max_register	= VCNL_PS_MOD_ADJ,
>  };
>  
> +static irqreturn_t vcnl3020_handle_irq_thread(int irq, void *p)
> +{
> +	struct iio_dev *indio_dev = p;
> +	struct vcnl3020_data *data = iio_priv(indio_dev);
> +	unsigned int isr;
> +	int rc;
> +
> +	rc = regmap_read(data->regmap, VCNL_ISR, &isr);
> +	if (rc) {
> +		dev_err(data->dev, "Error (%d) reading reg (0x%x)\n",
> +			rc, VCNL_ISR);
> +		return IRQ_HANDLED;
> +	}
> +
> +	if (isr & VCNL_ICR_THRES_EN) {
> +		iio_push_event(indio_dev,
> +			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY,
> +						    1,
> +						    IIO_EV_TYPE_THRESH,
> +						    IIO_EV_DIR_RISING),
> +			       iio_get_time_ns(indio_dev));
> +
> +		rc = regmap_write(data->regmap, VCNL_ISR,
> +				  isr & VCNL_ICR_THRES_EN);
> +		if (rc)
> +			dev_err(data->dev, "Error (%d) writing in reg (0x%x)\n",
> +				rc, VCNL_ISR);
> +	} else {
> +		return IRQ_NONE;
> +	}

It doesn't matter a lot, but this would have been neater done as

	if (!(isr & VCNL_ICR_THRESH_EN))
		return IRQ_NONE;

	iio_push_event(...

if that's all that turns up I'll flip it around whilst applying.
	
> +
> +	return IRQ_HANDLED;
> +}
> +
>  static int vcnl3020_probe(struct i2c_client *client)
>  {
>  	struct vcnl3020_data *data;
> @@ -328,6 +627,19 @@ static int vcnl3020_probe(struct i2c_client *client)
>  	indio_dev->name = "vcnl3020";
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  
> +	if (client->irq) {
> +		rc = devm_request_threaded_irq(&client->dev, client->irq,
> +					       NULL, vcnl3020_handle_irq_thread,
> +					       IRQF_ONESHOT, indio_dev->name,
> +					       indio_dev);
> +		if (rc) {
> +			dev_err(&client->dev,
> +				"Error (%d) irq request failed (%u)\n", rc,
> +				client->irq);
> +			return rc;
> +		}
> +	}
> +
>  	return devm_iio_device_register(&client->dev, indio_dev);
>  }
>  

Re: [PATCH v5 0/3] iio: vcnl3020: add periodic mode, threshold options

[Jonathan Cameron]

On Thu, 22 Jul 2021 18:44:17 +0300
Ivan Mikhaylov <i.mikhaylov@yadro.com> wrote:

> Add periodic mode enablement, high/low threshold options.
> 
> Changes from v1:
>  1. Remove changes for hwmon driver and changes affecting
> vcnl3020 data structure.
>  2. Add enable/disable periodic mode functions.
> 
> Changes from v2:
>  1. Minor fixes from Jonathan's comments.
> 
> Changes from v3:
>  1. add DMA safe buffer in vcnl3020_data and use it on bulk_read/write
>     calls
>  2. put vcnl3020_is_in_periodic_mode in vcnl3020_measure_proximity and
>     vcnl3020_write_proxy_samp_freq
>  3. add mutex instead of iio_claim in vcnl3020_write_proxy_samp_freq
>  4. out_mutex -> err_unlock
> 
> Changes from v4:
>  1. split into 3 patches - DMA safe buffer, periodic mode, change
>     iio_claim/release on mutex.
>  2. add dev_err for regmap_read/write

Hi Ivan,

Given I only wanted some trivial changes in patch 2, I've made those whilst applying
rather that wasting either of our time with a v6.  Please take a quick look to check
I didn't mess anything up!

Applied to the togreg branch of iio.git on kernel.org and pushed out as testing for
0-day to poke at it and see what it can find,

Thanks,

Jonathan

> 
> Ivan Mikhaylov (3):
>   iio: proximity: vcnl3020: add DMA safe buffer
>   iio: proximity: vcnl3020: add periodic mode
>   iio: proximity: vcnl3020: remove iio_claim/release_direct
> 
>  drivers/iio/proximity/vcnl3020.c | 354 +++++++++++++++++++++++++++++--
>  1 file changed, 338 insertions(+), 16 deletions(-)
>