linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Nuno Sa <Nuno.Sa@analog.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH v4 16/16] iio: adc: max1027: Don't reject external triggers when there is no IRQ
Date: Tue, 21 Sep 2021 13:54:08 +0200	[thread overview]
Message-ID: <20210921115408.66711-17-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20210921115408.66711-1-miquel.raynal@bootlin.com>

External triggers do not necessarily need the EOC interrupt to be
populated to work properly. The end of conversion status may either come
from an interrupt or from a sufficient enough extra delay. IRQs are not
mandatory so move the triggered buffer setup out of the IRQ condition
and add the logic to wait enough time for all the requested conversions
to be in the device's FIFO.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/iio/adc/max1027.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index 02735c604f82..45dc8a625fa3 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -288,6 +288,9 @@ static int max1027_wait_eoc(struct iio_dev *indio_dev)
 		if (!ret)
 			return ret;
 	} else {
+		if (indio_dev->active_scan_mask)
+			conversion_time *= hweight32(*indio_dev->active_scan_mask);
+
 		usleep_range(conversion_time, conversion_time * 2);
 	}
 
@@ -567,16 +570,18 @@ static int max1027_probe(struct spi_device *spi)
 	if (!st->buffer)
 		return -ENOMEM;
 
+	/* Enable triggered buffers */
+	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
+					      &iio_pollfunc_store_time,
+					      &max1027_trigger_handler,
+					      NULL);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev, "Failed to setup buffer\n");
+		return ret;
+	}
+
+	/* If there is an EOC interrupt, register the cnvst hardware trigger */
 	if (spi->irq) {
-		ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
-						      &iio_pollfunc_store_time,
-						      &max1027_trigger_handler,
-						      NULL);
-		if (ret < 0) {
-			dev_err(&indio_dev->dev, "Failed to setup buffer\n");
-			return ret;
-		}
-
 		st->trig = devm_iio_trigger_alloc(&spi->dev, "%s-trigger",
 						  indio_dev->name);
 		if (!st->trig) {
-- 
2.27.0


  parent reply	other threads:[~2021-09-21 11:54 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-21 11:53 [PATCH v4 00/16] Bring external triggers support to MAX1027-like ADCs Miquel Raynal
2021-09-21 11:53 ` [PATCH v4 01/16] iio: adc: max1027: Fix style Miquel Raynal
2021-09-21 11:53 ` [PATCH v4 02/16] iio: adc: max1027: Drop extra warning message Miquel Raynal
2021-09-21 11:53 ` [PATCH v4 03/16] iio: adc: max1027: Drop useless debug messages Miquel Raynal
2021-09-21 11:53 ` [PATCH v4 04/16] iio: adc: max1027: Minimize the number of converted channels Miquel Raynal
2021-09-21 11:53 ` [PATCH v4 05/16] iio: adc: max1027: Rename a helper Miquel Raynal
2021-09-21 11:53 ` [PATCH v4 06/16] iio: adc: max1027: Create a helper to enable/disable the cnvst trigger Miquel Raynal
2021-09-21 11:53 ` [PATCH v4 07/16] iio: adc: max1027: Simplify the _set_trigger_state() helper Miquel Raynal
2021-09-21 11:54 ` [PATCH v4 08/16] iio: adc: max1027: Ensure a default cnvst trigger configuration Miquel Raynal
2021-09-21 11:54 ` [PATCH v4 09/16] iio: adc: max1027: Create a helper to configure the channels to scan Miquel Raynal
2021-09-21 11:54 ` [PATCH v4 10/16] iio: adc: max1027: Prevent single channel accesses during buffer reads Miquel Raynal
2021-09-21 11:54 ` [PATCH v4 11/16] iio: adc: max1027: Separate the IRQ handler from the read logic Miquel Raynal
2021-09-21 11:54 ` [PATCH v4 12/16] iio: adc: max1027: Introduce an end of conversion helper Miquel Raynal
2021-09-21 11:54 ` [PATCH v4 13/16] iio: adc: max1027: Stop requesting a threaded IRQ Miquel Raynal
2021-09-21 11:54 ` [PATCH v4 14/16] iio: adc: max1027: Use the EOC IRQ when populated for single reads Miquel Raynal
2021-09-26 14:36   ` Jonathan Cameron
2021-09-27 14:30     ` Miquel Raynal
2021-09-21 11:54 ` [PATCH v4 15/16] iio: adc: max1027: Allow all kind of triggers to be used Miquel Raynal
2021-09-21 11:54 ` Miquel Raynal [this message]
2021-09-26 14:38 ` [PATCH v4 00/16] Bring external triggers support to MAX1027-like ADCs Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210921115408.66711-17-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=Nuno.Sa@analog.com \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --subject='Re: [PATCH v4 16/16] iio: adc: max1027: Don'\''t reject external triggers when there is no IRQ' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).