linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 00/48] TI AM437X ADC1
@ 2021-09-28 13:30 Miquel Raynal
  2021-09-28 13:30 ` [PATCH v4 01/48] clk: ti: am43xx: Add clkctrl data for am43xx ADC1 Miquel Raynal
                   ` (47 more replies)
  0 siblings, 48 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:30 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal

Hello,

This is a (fairly big) series bringing support of AM437X ADC1.
On TI AM33XX SoCs family there is an ADC that can also be connected to a
touchscreen. This hardware has been extended and is present on certain
SoCs from the AM437X family. In particular, the touchscreen has been
replaced by a magnetic card reader. In both cases, the representation is
an MFD device with two children:
* on AM33XX: the touchscreen controller and the ADC
* on AM437X: the magnetic stripe reader and the ADC

This series really targets small and atomic changes so that the overall
review is eased, even though it leads to a lot of rather small patches.
Here are the steps:
* Supporting the missing clock
* Translating a single text file containing the description for the
  MFD, the touchscreen and the ADC into three independent yaml files.
* Cleaning/preparing the MFD driver.
* Supporting ADC1 in the MFD driver.
* Cleaning/preparing of the ADC driver.
* Supporting ADC1 in the ADC driver.
* Updating various device trees.

Here is the full series again, almost reviewed and acked entirely.
The clock patch has been acked, the ADC patches as well, so we expect
the series to go through the MFD tree if the maintainers agree with it.

Thanks,
Miquèl

Changes in v4:
* R-by/A-by tags added from Tony, Dmitry and Jonathan.
* Inverted the order of three patches following Jonathan's advice:
  removing the ENB macro (and related definitions) should be done first,
  in order to avoid further updates of these useless macros. This lead
  to the addition of a new patch to first do the removal (which was part
  of patch "Drop useless definitions from the header" in the first
  place).
* Updated the naming of the MFD driver data structure as discussed with
  Lee.
* Used the "magnetic stripe reader" wording when appropriate.
* Created a helper using the compatible to determine if there is a
  touchscreen or a magnetic stripe reader in this version of the
  hardware.

Changes in v3:
* Rebased on top of v5.15-rc1.
* R-by/A-by tags added.
* Light reordering to let the of_put_node() fix to be applied more easily
* Dropped a patch made useless because of the previous reordering
* Explained how the tscadc->ctrl variable was used.
* Fixed a couple of typos.
* Included the change for the HZ macro.
* Went further in the BIT()/FIELD_PREP() cleanup.
* Added maximum definitions for sample delay/open delay.
* Removed useless definitions.
* Fixed a couple of rebase conflicts (the series was not bisectable).

Changes in v2:
* Added various R-by/A-by tags.
* Various typos & style fixes.
[Bindings]
* Included the missing ti,am654-tscadc compatible.
* Reworded the compatible lines as requested by Jonathan.
* Reworded the bindings content a little bit as advised by Rob (subnodes
  being objects, MFD descriptions provided once, status and unused
  labels removed).
[SPDX changes]
* Mentioned that the license macro and the license text matched.
* Also added an SPDX tag in the MFD header.
[MFD header]
* Used the BIT(), GENMASK() and PREP_FIELD() macros when relevant.
[MFD driver]
* Did not reordered the variables declared on the probe stack as advised
  by Jonathan.
* Added missing of_node_put() calls.
* Moved the patch changing the place where the main structure is
  allocated to directly precede the patch using this change.
* Fixed the driver data wiring (bug happening between ex patches 16 and
  28).
* Added a commit just to explain the reordering of the register writes
  during initialization/resume.
* Explained the check about 'use_tsc' in the commit message.
* Added a link to the TRM in a commit message referencing it.
* Removed the use of the ti,tracks property, used a constant value
  instead.
* Dropped the error check when retrieving the "wrong" DT property
  (coordiante-readouts) which is unused.


Miquel Raynal (48):
  clk: ti: am43xx: Add clkctrl data for am43xx ADC1
  dt-bindings: mfd: ti,am3359-tscadc: Add a yaml description for this
    MFD
  dt-bindings: touchscreen: ti,am3359-tsc: New yaml description
  dt-bindings: iio: adc: ti,am3359-adc: New yaml description
  dt-bindings: touchscreen: ti,am3359-tsc: Remove deprecated text file
  dt-bindings: mfd: ti,am3359-tscadc: Describe am4372 MFD compatible
  dt-bindings: iio: adc: ti,am3359-adc: Describe am4372 ADC compatible
  mfd: ti_am335x_tscadc: Ensure a balanced number of node get/put
  mfd: ti_am335x_tscadc: Replace license text with SPDX tag
  mfd: ti_am335x_tscadc: Fix style
  mfd: ti_am335x_tscadc: Drop extra spacing when declaring stack
    variables
  mfd: ti_am335x_tscadc: Get rid of useless gotos
  mfd: ti_am335x_tscadc: Reword the comment explaining the dividers
  mfd: ti_am335x_tscadc: Don't search the tree for our clock
  mfd: ti_am335x_tscadc: Simplify divisor calculation
  mfd: ti_am335x_tscadc: Move the driver structure allocation earlier
  mfd: ti_am335x_tscadc: Use driver data
  mfd: ti_am335x_tscadc: Mimic the probe from resume()
  mfd: ti_am335x_tscadc: Drop useless variables from the driver
    structure
  mfd: ti_am335x_tscadc: Always provide an idle configuration
  mfd: ti_am335x_tscadc: Reorder the initialization steps
  mfd: ti_am335x_tscadc: Gather the ctrl register logic in one place
  mfd: ti_am335x_tscadc: Replace the header license text with SPDX tag
  mfd: ti_am335x_tscadc: Fix header spacing
  mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro
  mfd: ti_am335x_tscadc: Drop unused definitions from the header
  mfd: ti_am335x_tscadc: Use BIT(), GENMASK() and FIELD_PREP() when
    relevant
  mfd: ti_am335x_tscadc: Clarify the maximum values for DT entries
  mfd: ti_am335x_tscadc: Drop useless definitions from the header
  mfd: ti_am335x_tscadc: Rename the subsystem enable macro
  mfd: ti_am335x_tscadc: Add TSC prefix in certain macros
  mfd: ti_am335x_tscadc: Rename a variable
  mfd: ti_am335x_tscadc: Fix an error message
  mfd: ti_am335x_tscadc: Add a boolean to clarify the presence of a
    touchscreen
  mfd: ti_am335x_tscadc: Introduce a helper to deal with the type of
    hardware
  mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support
  mfd: ti_am335x_tscadc: Support the correctly spelled DT property
  iio: adc: ti_am335x_adc: Wait the idle state to avoid stalls
  iio: adc: ti_am335x_adc: Replace license text with SPDX tag
  iio: adc: ti_am335x_adc: Fix style
  iio: adc: ti_am335x_adc: Get rid of useless gotos
  iio: adc: ti_am335x_adc: Gather the checks on the delays
  iio: adc: ti_am335x_adc: Add a unit to the timeout delay
  iio: adc: ti_am335x_adc: Add the scale information
  iio: adc: ti_am335x_adc: Add the am437x compatible
  ARM: dts: am437x-cm-t43: Use a correctly spelled DT property
  ARM: dts: am43xx: Describe the magnetic reader/ADC1 hardware module
  ARM: dts: am437x-gp-evm: enable ADC1

 .../bindings/iio/adc/ti,am3359-adc.yaml       |  70 ++++++
 .../input/touchscreen/ti,am3359-tsc.yaml      |  76 ++++++
 .../bindings/input/touchscreen/ti-tsc-adc.txt |  91 -------
 .../bindings/mfd/ti,am3359-tscadc.yaml        |  84 +++++++
 arch/arm/boot/dts/am437x-cm-t43.dts           |   2 +-
 arch/arm/boot/dts/am437x-gp-evm.dts           |   8 +
 arch/arm/boot/dts/am437x-l4.dtsi              |  31 ++-
 arch/arm/boot/dts/am43xx-clocks.dtsi          |   7 +
 drivers/clk/ti/clk-43xx.c                     |   1 +
 drivers/iio/adc/ti_am335x_adc.c               | 220 ++++++++++-------
 drivers/mfd/ti_am335x_tscadc.c                | 233 ++++++++++--------
 include/dt-bindings/clock/am4.h               |   1 +
 include/linux/mfd/ti_am335x_tscadc.h          | 119 +++++----
 13 files changed, 593 insertions(+), 350 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml

-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 01/48] clk: ti: am43xx: Add clkctrl data for am43xx ADC1
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
@ 2021-09-28 13:30 ` Miquel Raynal
  2021-09-28 13:30 ` [PATCH v4 02/48] dt-bindings: mfd: ti,am3359-tscadc: Add a yaml description for this MFD Miquel Raynal
                   ` (46 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:30 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Stephen Boyd

Declare ADC1 clkctrl which feeds the magnetic-reader/ADC1 hardware
module.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clk/ti/clk-43xx.c       | 1 +
 include/dt-bindings/clock/am4.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 46c0add99570..6e97a541cfd3 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -116,6 +116,7 @@ static const struct omap_clkctrl_reg_data am4_l3s_clkctrl_regs[] __initconst = {
 	{ AM4_L3S_VPFE0_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
 	{ AM4_L3S_VPFE1_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
 	{ AM4_L3S_GPMC_CLKCTRL, NULL, CLKF_SW_SUP, "l3s_gclk" },
+	{ AM4_L3S_ADC1_CLKCTRL, NULL, CLKF_SW_SUP, "l3s_gclk" },
 	{ AM4_L3S_MCASP0_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp0_fck" },
 	{ AM4_L3S_MCASP1_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp1_fck" },
 	{ AM4_L3S_MMC3_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
diff --git a/include/dt-bindings/clock/am4.h b/include/dt-bindings/clock/am4.h
index d961e7cb3682..4be6c5961f34 100644
--- a/include/dt-bindings/clock/am4.h
+++ b/include/dt-bindings/clock/am4.h
@@ -158,6 +158,7 @@
 #define AM4_L3S_VPFE0_CLKCTRL	AM4_L3S_CLKCTRL_INDEX(0x68)
 #define AM4_L3S_VPFE1_CLKCTRL	AM4_L3S_CLKCTRL_INDEX(0x70)
 #define AM4_L3S_GPMC_CLKCTRL	AM4_L3S_CLKCTRL_INDEX(0x220)
+#define AM4_L3S_ADC1_CLKCTRL	AM4_L3S_CLKCTRL_INDEX(0x230)
 #define AM4_L3S_MCASP0_CLKCTRL	AM4_L3S_CLKCTRL_INDEX(0x238)
 #define AM4_L3S_MCASP1_CLKCTRL	AM4_L3S_CLKCTRL_INDEX(0x240)
 #define AM4_L3S_MMC3_CLKCTRL	AM4_L3S_CLKCTRL_INDEX(0x248)
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 02/48] dt-bindings: mfd: ti,am3359-tscadc: Add a yaml description for this MFD
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
  2021-09-28 13:30 ` [PATCH v4 01/48] clk: ti: am43xx: Add clkctrl data for am43xx ADC1 Miquel Raynal
@ 2021-09-28 13:30 ` Miquel Raynal
  2021-09-28 13:30 ` [PATCH v4 03/48] dt-bindings: touchscreen: ti,am3359-tsc: New yaml description Miquel Raynal
                   ` (45 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:30 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Rob Herring, Jonathan Cameron

There is a very light description of this MFD in a text file dedicated
to a touchscreen controller (which is one of the two children of the
MFD). Here is now a complete yaml description.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 .../bindings/mfd/ti,am3359-tscadc.yaml        | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml

diff --git a/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
new file mode 100644
index 000000000000..b2bff85f2329
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,am3359-tscadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 Touchscreen controller/ADC
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,am3359-tscadc
+      - items:
+          - const: ti,am654-tscadc
+          - const: ti,am3359-tscadc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for FIFO0
+      - description: DMA controller phandle and request line for FIFO1
+
+  dma-names:
+    items:
+      - const: fifo0
+      - const: fifo1
+
+  adc:
+    type: object
+    description: ADC child
+
+  tsc:
+    type: object
+    description: Touchscreen controller child
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tscadc@0 {
+        compatible = "ti,am3359-tscadc";
+        reg = <0x0 0x1000>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&adc_tsc_fck>;
+        clock-names = "fck";
+        dmas = <&edma 53 0>, <&edma 57 0>;
+        dma-names = "fifo0", "fifo1";
+
+        tsc {
+        };
+
+        adc {
+        };
+    };
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 03/48] dt-bindings: touchscreen: ti,am3359-tsc: New yaml description
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
  2021-09-28 13:30 ` [PATCH v4 01/48] clk: ti: am43xx: Add clkctrl data for am43xx ADC1 Miquel Raynal
  2021-09-28 13:30 ` [PATCH v4 02/48] dt-bindings: mfd: ti,am3359-tscadc: Add a yaml description for this MFD Miquel Raynal
@ 2021-09-28 13:30 ` Miquel Raynal
  2021-09-28 13:30 ` [PATCH v4 04/48] dt-bindings: iio: adc: ti,am3359-adc: " Miquel Raynal
                   ` (44 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:30 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Rob Herring, Jonathan Cameron

This touchscreen controller is already described in a text file:
Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt

After introducing a proper description of the MFD, this is the second
step. The file cannot be removed yet as it also contains an ADC
description.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../input/touchscreen/ti,am3359-tsc.yaml      | 76 +++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml

diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
new file mode 100644
index 000000000000..e44cc65abc8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,am3359-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 Touchscreen controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    const: ti,am3359-tsc
+
+  ti,wires:
+    description: Wires refer to application modes i.e. 4/5/8 wire touchscreen
+      support on the platform.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [4, 5, 8]
+
+  ti,x-plate-resistance:
+    description: X plate resistance
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,coordinate-readouts:
+    description: The sequencer supports a total of 16 programmable steps. Each
+      step is used to read a single coordinate. A single readout is enough but
+      multiple reads can increase the quality. A value of 5 means, 5 reads for
+      X, 5 for Y and 2 for Z (always). This utilises 12 of the 16 software steps
+      available. The remaining 4 can be used by the ADC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 6
+
+  ti,wire-config:
+    description: Different boards could have a different order for connecting
+      wires on touchscreen. We need to provide an 8-bit number where the
+      first four bits represent the analog lines and the next 4 bits represent
+      positive/negative terminal on that input line. Notations to represent the
+      input lines and terminals respectively are as follows, AIN0 = 0, AIN1 = 1
+      and so on until AIN7 = 7. XP = 0, XN = 1, YP = 2, YN = 3.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 8
+
+  ti,charge-delay:
+    description: Length of touch screen charge delay step in terms of ADC clock
+      cycles. Charge delay value should be large in order to avoid false pen-up
+      events. This value effects the overall sampling speed, hence need to be
+      kept as low as possible, while avoiding false pen-up event. Start from a
+      lower value, say 0x400, and increase value until false pen-up events are
+      avoided. The pen-up detection happens immediately after the charge step,
+      so this does in fact function as a hardware knob for adjusting the amount
+      of "settling time".
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - ti,wires
+  - ti,x-plate-resistance
+  - ti,coordinate-readouts
+  - ti,wire-config
+
+additionalProperties: false
+
+examples:
+  - |
+    tsc {
+        compatible = "ti,am3359-tsc";
+        ti,wires = <4>;
+        ti,x-plate-resistance = <200>;
+        ti,coordinate-readouts = <5>;
+        ti,wire-config = <0x00 0x11 0x22 0x33>;
+        ti,charge-delay = <0x400>;
+    };
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 04/48] dt-bindings: iio: adc: ti,am3359-adc: New yaml description
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (2 preceding siblings ...)
  2021-09-28 13:30 ` [PATCH v4 03/48] dt-bindings: touchscreen: ti,am3359-tsc: New yaml description Miquel Raynal
@ 2021-09-28 13:30 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 05/48] dt-bindings: touchscreen: ti,am3359-tsc: Remove deprecated text file Miquel Raynal
                   ` (43 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:30 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron, Rob Herring

This ADC was already described in a text file also containing an MFD
description an a touchscreen description:
Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
Let's add a proper description for this hardware.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/iio/adc/ti,am3359-adc.yaml       | 68 +++++++++++++++++++
 1 file changed, 68 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
new file mode 100644
index 000000000000..f262402ca037
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,am3359-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 ADC
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    const: ti,am3359-adc
+
+  '#io-channel-cells':
+    const: 1
+
+  ti,adc-channels:
+    description: List of analog inputs available for ADC. AIN0 = 0, AIN1 = 1 and
+      so on until AIN7 = 7.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-opendelay:
+    description: List of open delays for each channel of ADC in the order of
+      ti,adc-channels. The value corresponds to the number of ADC clock cycles
+      to wait after applying the step configuration registers and before sending
+      the start of ADC conversion. Maximum value is 0x3FFFF.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-sampledelay:
+    description: List of sample delays for each channel of ADC in the order of
+      ti,adc-channels. The value corresponds to the number of ADC clock cycles
+      to sample (to hold start of conversion high). Maximum value is 0xFF.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-avg:
+    description: Number of averages to be performed for each channel of ADC. If
+      average is 16 (this is also the maximum) then input is sampled 16 times
+      and averaged to get more accurate value. This increases the time taken by
+      ADC to generate a sample. Maximum value is 16.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - '#io-channel-cells'
+  - ti,adc-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+        compatible = "ti,am3359-adc";
+        #io-channel-cells = <1>;
+        ti,adc-channels = <4 5 6 7>;
+        ti,chan-step-opendelay = <0x098 0x3ffff 0x098 0x0>;
+        ti,chan-step-sampledelay = <0xff 0x0 0xf 0x0>;
+        ti,chan-step-avg = <16 2 4 8>;
+    };
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 05/48] dt-bindings: touchscreen: ti,am3359-tsc: Remove deprecated text file
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (3 preceding siblings ...)
  2021-09-28 13:30 ` [PATCH v4 04/48] dt-bindings: iio: adc: ti,am3359-adc: " Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 06/48] dt-bindings: mfd: ti,am3359-tscadc: Describe am4372 MFD compatible Miquel Raynal
                   ` (42 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron, Rob Herring

Now that the three hardware peaces described in this file have been
translated in yaml in 3 dedicated files (MFD, touchscreen controller and
ADC) it is time to remove this text file.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../bindings/input/touchscreen/ti-tsc-adc.txt | 91 -------------------
 1 file changed, 91 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
deleted file mode 100644
index aad5e34965eb..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-* TI - TSC ADC (Touschscreen and analog digital converter)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Required properties:
-- mfd
-	compatible: Should be
-		"ti,am3359-tscadc" for AM335x/AM437x SoCs
-		"ti,am654-tscadc", "ti,am3359-tscadc" for AM654 SoCs
-- child "tsc"
-	compatible: Should be "ti,am3359-tsc".
-	ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
-		  support on the platform.
-	ti,x-plate-resistance: X plate resistance
-	ti,coordinate-readouts: The sequencer supports a total of 16
-				programmable steps each step is used to
-				read a single coordinate. A single
-                                readout is enough but multiple reads can
-				increase the quality.
-				A value of 5 means, 5 reads for X, 5 for
-				Y and 2 for Z (always). This utilises 12
-				of the 16 software steps available. The
-				remaining 4 can be used by the ADC.
-	ti,wire-config: Different boards could have a different order for
-			connecting wires on touchscreen. We need to provide an
-			8 bit number where in the 1st four bits represent the
-			analog lines and the next 4 bits represent positive/
-			negative terminal on that input line. Notations to
-			represent the input lines and terminals resoectively
-			is as follows:
-			AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
-			XP  = 0, XN = 1, YP = 2, YN = 3.
-- child "adc"
-	compatible: Should be
-		    "ti,am3359-adc" for AM335x/AM437x SoCs
-		    "ti,am654-adc", "ti,am3359-adc" for AM654 SoCs
-	ti,adc-channels: List of analog inputs available for ADC.
-			 AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
-
-Optional properties:
-- child "tsc"
-	ti,charge-delay: Length of touch screen charge delay step in terms of
-			 ADC clock cycles. Charge delay value should be large
-			 in order to avoid false pen-up events. This value
-			 effects the overall sampling speed, hence need to be
-			 kept as low as possible, while avoiding false pen-up
-			 event. Start from a lower value, say 0x400, and
-			 increase value until false pen-up events are avoided.
-			 The pen-up detection happens immediately after the
-			 charge step, so this does in fact function as a
-			 hardware knob for adjusting the amount of "settling
-			 time".
-
-- child "adc"
-	ti,chan-step-opendelay: List of open delays for each channel of
-				ADC in the order of ti,adc-channels. The
-				value corresponds to the number of ADC
-				clock cycles to wait after applying the
-				step configuration registers and before
-				sending the start of ADC conversion.
-				Maximum value is 0x3FFFF.
-       ti,chan-step-sampledelay: List of sample delays for each channel
-				  of ADC in the order of ti,adc-channels.
-				  The value corresponds to the number of
-				  ADC clock cycles to sample (to hold
-				  start of conversion high).
-				  Maximum value is 0xFF.
-       ti,chan-step-avg: Number of averages to be performed for each
-			  channel of ADC. If average is 16 then input
-			  is sampled 16 times and averaged to get more
-			  accurate value. This increases the time taken
-			  by ADC to generate a sample. Valid range is 0
-			  average to 16 averages. Maximum value is 16.
-
-Example:
-	tscadc: tscadc@44e0d000 {
-		compatible = "ti,am3359-tscadc";
-		tsc {
-			ti,wires = <4>;
-			ti,x-plate-resistance = <200>;
-			ti,coordiante-readouts = <5>;
-			ti,wire-config = <0x00 0x11 0x22 0x33>;
-			ti,charge-delay = <0x400>;
-		};
-
-		adc {
-			ti,adc-channels = <4 5 6 7>;
-			ti,chan-step-opendelay = <0x098 0x3ffff 0x098 0x0>;
-			ti,chan-step-sampledelay = <0xff 0x0 0xf 0x0>;
-			ti,chan-step-avg = <16 2 4 8>;
-		};
-	}
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 06/48] dt-bindings: mfd: ti,am3359-tscadc: Describe am4372 MFD compatible
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (4 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 05/48] dt-bindings: touchscreen: ti,am3359-tsc: Remove deprecated text file Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 07/48] dt-bindings: iio: adc: ti,am3359-adc: Describe am4372 ADC compatible Miquel Raynal
                   ` (41 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron, Rob Herring

A more recent version of the am3359 ADC/Touchscreen controller is
available on certain SoCs of the am437x family. This IP has evolved a
little bit and deserves its own compatible.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
index b2bff85f2329..34bf6a01436f 100644
--- a/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
@@ -16,6 +16,7 @@ properties:
       - items:
           - const: ti,am654-tscadc
           - const: ti,am3359-tscadc
+      - const: ti,am4372-magadc
 
   reg:
     maxItems: 1
@@ -47,6 +48,10 @@ properties:
     type: object
     description: Touchscreen controller child
 
+  mag:
+    type: object
+    description: Magnetic reader
+
 required:
   - compatible
   - reg
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 07/48] dt-bindings: iio: adc: ti,am3359-adc: Describe am4372 ADC compatible
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (5 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 06/48] dt-bindings: mfd: ti,am3359-tscadc: Describe am4372 MFD compatible Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 08/48] mfd: ti_am335x_tscadc: Ensure a balanced number of node get/put Miquel Raynal
                   ` (40 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron, Rob Herring

A more recent version of the am3359 ADC is available on certain SoCs of
the am437x family. This IP has evolved a little bit and deserves its own
compatible.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
index f262402ca037..d6f21d5cccd7 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: ti,am3359-adc
+    enum:
+      - ti,am3359-adc
+      - ti,am4372-adc
 
   '#io-channel-cells':
     const: 1
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 08/48] mfd: ti_am335x_tscadc: Ensure a balanced number of node get/put
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (6 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 07/48] dt-bindings: iio: adc: ti,am3359-adc: Describe am4372 ADC compatible Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 09/48] mfd: ti_am335x_tscadc: Replace license text with SPDX tag Miquel Raynal
                   ` (39 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

of_node_put() should be called after a successful of_get_child_by_name().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 55adc379f94b..eb5c23e3eacd 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -142,6 +142,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	node = of_get_child_by_name(pdev->dev.of_node, "tsc");
 	of_property_read_u32(node, "ti,wires", &tsc_wires);
 	of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
+	of_node_put(node);
 
 	node = of_get_child_by_name(pdev->dev.of_node, "adc");
 	of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
@@ -149,9 +150,13 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		if (val > 7) {
 			dev_err(&pdev->dev, " PIN numbers are 0..7 (not %d)\n",
 					val);
+			of_node_put(node);
 			return -EINVAL;
 		}
 	}
+
+	of_node_put(node);
+
 	total_channels = tsc_wires + adc_channels;
 	if (total_channels > 8) {
 		dev_err(&pdev->dev, "Number of i/p channels more than 8\n");
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 09/48] mfd: ti_am335x_tscadc: Replace license text with SPDX tag
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (7 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 08/48] mfd: ti_am335x_tscadc: Ensure a balanced number of node get/put Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 10/48] mfd: ti_am335x_tscadc: Fix style Miquel Raynal
                   ` (38 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Drop the text license and replace it with an equivalent SPDX license tag
identifier which also matches the MODULE_LICENSE(GPL) macro.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index eb5c23e3eacd..82ace1cd6d2e 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI Touch Screen / ADC MFD driver
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/module.h>
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 10/48] mfd: ti_am335x_tscadc: Fix style
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (8 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 09/48] mfd: ti_am335x_tscadc: Replace license text with SPDX tag Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 11/48] mfd: ti_am335x_tscadc: Drop extra spacing when declaring stack variables Miquel Raynal
                   ` (37 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

These are mostly deffects reported by checkpatch.pl.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 82ace1cd6d2e..00428d12e6b8 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -141,7 +141,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		adc_channels++;
 		if (val > 7) {
 			dev_err(&pdev->dev, " PIN numbers are 0..7 (not %d)\n",
-					val);
+				val);
 			of_node_put(node);
 			return -EINVAL;
 		}
@@ -154,6 +154,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Number of i/p channels more than 8\n");
 		return -EINVAL;
 	}
+
 	if (total_channels == 0) {
 		dev_err(&pdev->dev, "Need atleast one channel.\n");
 		return -EINVAL;
@@ -184,7 +185,8 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 
 	tscadc->tscadc_phys_base = res->start;
 	tscadc->regmap = devm_regmap_init_mmio(&pdev->dev,
-			tscadc->tscadc_base, &tscadc_regmap_config);
+					       tscadc->tscadc_base,
+					       &tscadc_regmap_config);
 	if (IS_ERR(tscadc->regmap)) {
 		dev_err(&pdev->dev, "regmap init failed\n");
 		err = PTR_ERR(tscadc->regmap);
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 11/48] mfd: ti_am335x_tscadc: Drop extra spacing when declaring stack variables
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (9 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 10/48] mfd: ti_am335x_tscadc: Fix style Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 12/48] mfd: ti_am335x_tscadc: Get rid of useless gotos Miquel Raynal
                   ` (36 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Many variables will be updated (renamed, dropped, added) in the upcoming
changes, so let's simplify the style to avoid messing with spaces over
and over again.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 00428d12e6b8..07da4059d7f7 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -113,18 +113,18 @@ static void tscadc_idle_config(struct ti_tscadc_dev *tscadc)
 
 static	int ti_tscadc_probe(struct platform_device *pdev)
 {
-	struct ti_tscadc_dev	*tscadc;
-	struct resource		*res;
-	struct clk		*clk;
-	struct device_node	*node;
-	struct mfd_cell		*cell;
-	struct property         *prop;
-	const __be32            *cur;
-	u32			val;
-	int			err, ctrl;
-	int			clock_rate;
-	int			tsc_wires = 0, adc_channels = 0, total_channels;
-	int			readouts = 0;
+	struct ti_tscadc_dev *tscadc;
+	struct resource *res;
+	struct clk *clk;
+	struct device_node *node;
+	struct mfd_cell *cell;
+	struct property *prop;
+	const __be32 *cur;
+	u32 val;
+	int err, ctrl;
+	int clock_rate;
+	int tsc_wires = 0, adc_channels = 0, total_channels;
+	int readouts = 0;
 
 	if (!pdev->dev.of_node) {
 		dev_err(&pdev->dev, "Could not find valid DT data.\n");
@@ -280,7 +280,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 
 static int ti_tscadc_remove(struct platform_device *pdev)
 {
-	struct ti_tscadc_dev	*tscadc = platform_get_drvdata(pdev);
+	struct ti_tscadc_dev *tscadc = platform_get_drvdata(pdev);
 
 	regmap_write(tscadc->regmap, REG_SE, 0x00);
 
@@ -299,7 +299,7 @@ static int __maybe_unused ti_tscadc_can_wakeup(struct device *dev, void *data)
 
 static int __maybe_unused tscadc_suspend(struct device *dev)
 {
-	struct ti_tscadc_dev	*tscadc = dev_get_drvdata(dev);
+	struct ti_tscadc_dev *tscadc = dev_get_drvdata(dev);
 
 	regmap_write(tscadc->regmap, REG_SE, 0x00);
 	if (device_for_each_child(dev, NULL, ti_tscadc_can_wakeup)) {
@@ -317,7 +317,7 @@ static int __maybe_unused tscadc_suspend(struct device *dev)
 
 static int __maybe_unused tscadc_resume(struct device *dev)
 {
-	struct ti_tscadc_dev	*tscadc = dev_get_drvdata(dev);
+	struct ti_tscadc_dev *tscadc = dev_get_drvdata(dev);
 	u32 ctrl;
 
 	pm_runtime_get_sync(dev);
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 12/48] mfd: ti_am335x_tscadc: Get rid of useless gotos
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (10 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 11/48] mfd: ti_am335x_tscadc: Drop extra spacing when declaring stack variables Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 13/48] mfd: ti_am335x_tscadc: Reword the comment explaining the dividers Miquel Raynal
                   ` (35 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Goto's jumping to a return statement are not really useful, drop them.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 07da4059d7f7..a211b35ad106 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -174,7 +174,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 
 	err = platform_get_irq(pdev, 0);
 	if (err < 0)
-		goto ret;
+		return err;
 	else
 		tscadc->irq = err;
 
@@ -189,8 +189,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 					       &tscadc_regmap_config);
 	if (IS_ERR(tscadc->regmap)) {
 		dev_err(&pdev->dev, "regmap init failed\n");
-		err = PTR_ERR(tscadc->regmap);
-		goto ret;
+		return PTR_ERR(tscadc->regmap);
 	}
 
 	spin_lock_init(&tscadc->reg_lock);
@@ -274,7 +273,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 err_disable_clk:
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-ret:
+
 	return err;
 }
 
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 13/48] mfd: ti_am335x_tscadc: Reword the comment explaining the dividers
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (11 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 12/48] mfd: ti_am335x_tscadc: Get rid of useless gotos Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 14/48] mfd: ti_am335x_tscadc: Don't search the tree for our clock Miquel Raynal
                   ` (34 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

The comment misses the main information which is that we assume that a
sample takes 15 ADC clock cycles to be generated. Let's take the
occasion to rework a little bit this comment.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index a211b35ad106..7aeabac37990 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -199,12 +199,12 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	pm_runtime_get_sync(&pdev->dev);
 
 	/*
-	 * The TSC_ADC_Subsystem has 2 clock domains
-	 * OCP_CLK and ADC_CLK.
-	 * The ADC clock is expected to run at target of 3MHz,
-	 * and expected to capture 12-bit data at a rate of 200 KSPS.
-	 * The TSC_ADC_SS controller design assumes the OCP clock is
-	 * at least 6x faster than the ADC clock.
+	 * The TSC_ADC_Subsystem has 2 clock domains: OCP_CLK and ADC_CLK.
+	 * ADCs produce a 12-bit sample every 15 ADC_CLK cycles.
+	 * am33xx ADCs expect to capture 200ksps.
+	 * We need the ADC clocks to run at 3MHz.
+	 * This frequency is valid since TSC_ADC_SS controller design
+	 * assumes the OCP clock is at least 6x faster than the ADC clock.
 	 */
 	clk = devm_clk_get(&pdev->dev, "adc_tsc_fck");
 	if (IS_ERR(clk)) {
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 14/48] mfd: ti_am335x_tscadc: Don't search the tree for our clock
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (12 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 13/48] mfd: ti_am335x_tscadc: Reword the comment explaining the dividers Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 15/48] mfd: ti_am335x_tscadc: Simplify divisor calculation Miquel Raynal
                   ` (33 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal

There is a single clock available in our node, which is named
"fck". The clock handler then points to adc_tsc_fck but no need to point
directly to it and do a full tree search.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 7aeabac37990..7f7b8e79a7bf 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -206,7 +206,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	 * This frequency is valid since TSC_ADC_SS controller design
 	 * assumes the OCP clock is at least 6x faster than the ADC clock.
 	 */
-	clk = devm_clk_get(&pdev->dev, "adc_tsc_fck");
+	clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get TSC fck\n");
 		err = PTR_ERR(clk);
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 15/48] mfd: ti_am335x_tscadc: Simplify divisor calculation
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (13 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 14/48] mfd: ti_am335x_tscadc: Don't search the tree for our clock Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 16/48] mfd: ti_am335x_tscadc: Move the driver structure allocation earlier Miquel Raynal
                   ` (32 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Let's rewrite this on a single line, it does not hurt the readability
and saves a useless temporary variable.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 7f7b8e79a7bf..20d8ddee27fe 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -122,7 +122,6 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	const __be32 *cur;
 	u32 val;
 	int err, ctrl;
-	int clock_rate;
 	int tsc_wires = 0, adc_channels = 0, total_channels;
 	int readouts = 0;
 
@@ -212,11 +211,8 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		err = PTR_ERR(clk);
 		goto err_disable_clk;
 	}
-	clock_rate = clk_get_rate(clk);
-	tscadc->clk_div = clock_rate / ADC_CLK;
 
-	/* TSCADC_CLKDIV needs to be configured to the value minus 1 */
-	tscadc->clk_div--;
+	tscadc->clk_div = (clk_get_rate(clk) / ADC_CLK) - 1;
 	regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
 
 	/* Set the control register bits */
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 16/48] mfd: ti_am335x_tscadc: Move the driver structure allocation earlier
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (14 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 15/48] mfd: ti_am335x_tscadc: Simplify divisor calculation Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 17/48] mfd: ti_am335x_tscadc: Use driver data Miquel Raynal
                   ` (31 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Allocating the driver structure should be done earlier in the probe so
that we can used its members from the beginning.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 20d8ddee27fe..ba821109e98b 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -125,6 +125,13 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	int tsc_wires = 0, adc_channels = 0, total_channels;
 	int readouts = 0;
 
+	/* Allocate memory for device */
+	tscadc = devm_kzalloc(&pdev->dev, sizeof(*tscadc), GFP_KERNEL);
+	if (!tscadc)
+		return -ENOMEM;
+
+	tscadc->dev = &pdev->dev;
+
 	if (!pdev->dev.of_node) {
 		dev_err(&pdev->dev, "Could not find valid DT data.\n");
 		return -EINVAL;
@@ -164,13 +171,6 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	/* Allocate memory for device */
-	tscadc = devm_kzalloc(&pdev->dev, sizeof(*tscadc), GFP_KERNEL);
-	if (!tscadc)
-		return -ENOMEM;
-
-	tscadc->dev = &pdev->dev;
-
 	err = platform_get_irq(pdev, 0);
 	if (err < 0)
 		return err;
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 17/48] mfd: ti_am335x_tscadc: Use driver data
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (15 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 16/48] mfd: ti_am335x_tscadc: Move the driver structure allocation earlier Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 18/48] mfd: ti_am335x_tscadc: Mimic the probe from resume() Miquel Raynal
                   ` (30 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

So far every sub-cell parameter in this driver was hardcoded: cell name,
cell compatible, specific clock name and desired clock frequency.

As we are about to introduce support for ADC1/magnetic reader, we need a
bit of flexibility. Let's add a driver data structure which will contain
these information.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c       | 22 ++++++++++++++++------
 include/linux/mfd/ti_am335x_tscadc.h |  9 +++++++++
 2 files changed, 25 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index ba821109e98b..69b0eff1a55e 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -137,6 +137,8 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	tscadc->data = of_device_get_match_data(&pdev->dev);
+
 	node = of_get_child_by_name(pdev->dev.of_node, "tsc");
 	of_property_read_u32(node, "ti,wires", &tsc_wires);
 	of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
@@ -212,7 +214,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		goto err_disable_clk;
 	}
 
-	tscadc->clk_div = (clk_get_rate(clk) / ADC_CLK) - 1;
+	tscadc->clk_div = (clk_get_rate(clk) / tscadc->data->target_clk_rate) - 1;
 	regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
 
 	/* Set the control register bits */
@@ -241,8 +243,8 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	if (tsc_wires > 0) {
 		tscadc->tsc_cell = tscadc->used_cells;
 		cell = &tscadc->cells[tscadc->used_cells++];
-		cell->name = "TI-am335x-tsc";
-		cell->of_compatible = "ti,am3359-tsc";
+		cell->name = tscadc->data->secondary_feature_name;
+		cell->of_compatible = tscadc->data->secondary_feature_compatible;
 		cell->platform_data = &tscadc;
 		cell->pdata_size = sizeof(tscadc);
 	}
@@ -251,8 +253,8 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	if (adc_channels > 0) {
 		tscadc->adc_cell = tscadc->used_cells;
 		cell = &tscadc->cells[tscadc->used_cells++];
-		cell->name = "TI-am335x-adc";
-		cell->of_compatible = "ti,am3359-adc";
+		cell->name = tscadc->data->adc_feature_name;
+		cell->of_compatible = tscadc->data->adc_feature_compatible;
 		cell->platform_data = &tscadc;
 		cell->pdata_size = sizeof(tscadc);
 	}
@@ -338,8 +340,16 @@ static int __maybe_unused tscadc_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(tscadc_pm_ops, tscadc_suspend, tscadc_resume);
 
+static const struct ti_tscadc_data tscdata = {
+	.adc_feature_name = "TI-am335x-adc",
+	.adc_feature_compatible = "ti,am3359-adc",
+	.secondary_feature_name = "TI-am335x-tsc",
+	.secondary_feature_compatible = "ti,am3359-tsc",
+	.target_clk_rate = ADC_CLK,
+};
+
 static const struct of_device_id ti_tscadc_dt_ids[] = {
-	{ .compatible = "ti,am3359-tscadc", },
+	{ .compatible = "ti,am3359-tscadc", .data = &tscdata },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ti_tscadc_dt_ids);
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index ffc091b77633..bb3b56ade3fb 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -162,11 +162,20 @@
 
 #define TSCADC_CELLS		2
 
+struct ti_tscadc_data {
+	char *adc_feature_name;
+	char *adc_feature_compatible;
+	char *secondary_feature_name;
+	char *secondary_feature_compatible;
+	unsigned int target_clk_rate;
+};
+
 struct ti_tscadc_dev {
 	struct device *dev;
 	struct regmap *regmap;
 	void __iomem *tscadc_base;
 	phys_addr_t tscadc_phys_base;
+	const struct ti_tscadc_data *data;
 	int irq;
 	int used_cells;	/* 1-2 */
 	int tsc_wires;
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 18/48] mfd: ti_am335x_tscadc: Mimic the probe from resume()
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (16 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 17/48] mfd: ti_am335x_tscadc: Use driver data Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 19/48] mfd: ti_am335x_tscadc: Drop useless variables from the driver structure Miquel Raynal
                   ` (29 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Use the number of touchscreen wires (tsc_wires) instead of the flag
indicating a touchscreen cell (tsc_cell) to mimic the logic from the
probe.

Besides keeping a certain harmony in the driver, the main benefit is
that we are going to simplify the number of entries in the main MFD
structure and tsc_cell can now be removed more easily.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 69b0eff1a55e..d9c0b16d8d0d 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -323,7 +323,7 @@ static int __maybe_unused tscadc_resume(struct device *dev)
 	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
 	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
 
-	if (tscadc->tsc_cell != -1) {
+	if (tscadc->tsc_wires > 0) {
 		if (tscadc->tsc_wires == 5)
 			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
 		else
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 19/48] mfd: ti_am335x_tscadc: Drop useless variables from the driver structure
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (17 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 18/48] mfd: ti_am335x_tscadc: Mimic the probe from resume() Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 20/48] mfd: ti_am335x_tscadc: Always provide an idle configuration Miquel Raynal
                   ` (28 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Keeping the count of tsc_cells and adc_cells is completely redundant, we
can derive this information from other variables. Plus, these variables
are not used anywhere else now. Let's get rid of them.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c       | 15 ++++-----------
 include/linux/mfd/ti_am335x_tscadc.h |  3 ---
 2 files changed, 4 insertions(+), 14 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index d9c0b16d8d0d..9ce1a3e34c1e 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -122,7 +122,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	const __be32 *cur;
 	u32 val;
 	int err, ctrl;
-	int tsc_wires = 0, adc_channels = 0, total_channels;
+	int tsc_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
 	int readouts = 0;
 
 	/* Allocate memory for device */
@@ -235,14 +235,9 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	ctrl |= CNTRLREG_TSCSSENB;
 	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
 
-	tscadc->used_cells = 0;
-	tscadc->tsc_cell = -1;
-	tscadc->adc_cell = -1;
-
 	/* TSC Cell */
 	if (tsc_wires > 0) {
-		tscadc->tsc_cell = tscadc->used_cells;
-		cell = &tscadc->cells[tscadc->used_cells++];
+		cell = &tscadc->cells[cell_idx++];
 		cell->name = tscadc->data->secondary_feature_name;
 		cell->of_compatible = tscadc->data->secondary_feature_compatible;
 		cell->platform_data = &tscadc;
@@ -251,8 +246,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 
 	/* ADC Cell */
 	if (adc_channels > 0) {
-		tscadc->adc_cell = tscadc->used_cells;
-		cell = &tscadc->cells[tscadc->used_cells++];
+		cell = &tscadc->cells[cell_idx++];
 		cell->name = tscadc->data->adc_feature_name;
 		cell->of_compatible = tscadc->data->adc_feature_compatible;
 		cell->platform_data = &tscadc;
@@ -260,8 +254,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	}
 
 	err = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO,
-			      tscadc->cells, tscadc->used_cells, NULL,
-			      0, NULL);
+			      tscadc->cells, cell_idx, NULL, 0, NULL);
 	if (err < 0)
 		goto err_disable_clk;
 
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index bb3b56ade3fb..23442059d271 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -177,10 +177,7 @@ struct ti_tscadc_dev {
 	phys_addr_t tscadc_phys_base;
 	const struct ti_tscadc_data *data;
 	int irq;
-	int used_cells;	/* 1-2 */
 	int tsc_wires;
-	int tsc_cell;	/* -1 if not used */
-	int adc_cell;	/* -1 if not used */
 	struct mfd_cell cells[TSCADC_CELLS];
 	u32 reg_se_cache;
 	bool adc_waiting;
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 20/48] mfd: ti_am335x_tscadc: Always provide an idle configuration
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (18 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 19/48] mfd: ti_am335x_tscadc: Drop useless variables from the driver structure Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 21/48] mfd: ti_am335x_tscadc: Reorder the initialization steps Miquel Raynal
                   ` (27 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

The idle register is valid no matter if the touchscreen is used or not,
let's always configure it.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 9ce1a3e34c1e..d1f70224e457 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -221,16 +221,16 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
 	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
 
-	/* Set register bits for Idle Config Mode */
 	if (tsc_wires > 0) {
 		tscadc->tsc_wires = tsc_wires;
 		if (tsc_wires == 5)
 			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
 		else
 			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
-		tscadc_idle_config(tscadc);
 	}
 
+	tscadc_idle_config(tscadc);
+
 	/* Enable the TSC module enable bit */
 	ctrl |= CNTRLREG_TSCSSENB;
 	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
@@ -321,8 +321,10 @@ static int __maybe_unused tscadc_resume(struct device *dev)
 			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
 		else
 			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
-		tscadc_idle_config(tscadc);
 	}
+
+	tscadc_idle_config(tscadc);
+
 	ctrl |= CNTRLREG_TSCSSENB;
 	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
 
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 21/48] mfd: ti_am335x_tscadc: Reorder the initialization steps
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (19 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 20/48] mfd: ti_am335x_tscadc: Always provide an idle configuration Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 22/48] mfd: ti_am335x_tscadc: Gather the ctrl register logic in one place Miquel Raynal
                   ` (26 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

TI AM335X TRM [1] states that most of the configuration should be set in
the control register in the first place, before actually enabling the
hardware with the subsystem enable bit.

So far only half of the configuration was made in the first step (before
enabling the "subsystem"), which does not make really sense. Also, the
probe and the resume patch were acting differently. Let's harmonize all
this by following these steps:
1/ Configure the CLKDIV register
2/ Configure the CTRL register
3/ Configure the idle configuration
4/ Really enable the device by rewriting the CTRL register with the
   subsystem enable bit set.

[1] https://www.ti.com/lit/pdf/spruh73

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index d1f70224e457..01c2b7d1c18c 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -219,8 +219,6 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 
 	/* Set the control register bits */
 	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
-	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
-
 	if (tsc_wires > 0) {
 		tscadc->tsc_wires = tsc_wires;
 		if (tsc_wires == 5)
@@ -228,6 +226,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		else
 			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
 	}
+	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
 
 	tscadc_idle_config(tscadc);
 
@@ -313,9 +312,9 @@ static int __maybe_unused tscadc_resume(struct device *dev)
 	pm_runtime_get_sync(dev);
 
 	/* context restore */
-	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
-	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
+	regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
 
+	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
 	if (tscadc->tsc_wires > 0) {
 		if (tscadc->tsc_wires == 5)
 			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
@@ -323,13 +322,13 @@ static int __maybe_unused tscadc_resume(struct device *dev)
 			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
 	}
 
+	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
+
 	tscadc_idle_config(tscadc);
 
 	ctrl |= CNTRLREG_TSCSSENB;
 	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
 
-	regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
-
 	return 0;
 }
 
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 22/48] mfd: ti_am335x_tscadc: Gather the ctrl register logic in one place
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (20 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 21/48] mfd: ti_am335x_tscadc: Reorder the initialization steps Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 23/48] mfd: ti_am335x_tscadc: Replace the header license text with SPDX tag Miquel Raynal
                   ` (25 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Instead of deriving in the probe and in the resume path the value of the
ctrl register, let's do it only once in the probe, save the value of
this register (all but the subsystem enable bit) in the driver's
structure and use it from the resume callback.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c       | 39 ++++++++++------------------
 include/linux/mfd/ti_am335x_tscadc.h |  2 +-
 2 files changed, 15 insertions(+), 26 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 01c2b7d1c18c..df4f905a7b52 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -121,7 +121,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	struct property *prop;
 	const __be32 *cur;
 	u32 val;
-	int err, ctrl;
+	int err;
 	int tsc_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
 	int readouts = 0;
 
@@ -217,22 +217,25 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	tscadc->clk_div = (clk_get_rate(clk) / tscadc->data->target_clk_rate) - 1;
 	regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
 
-	/* Set the control register bits */
-	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
+	/*
+	 * Set the control register bits. tscadc->ctrl stores the configuration
+	 * of the CTRL register but not the subsystem enable bit which must be
+	 * added manually when timely.
+	 */
+	tscadc->ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_STEPID;
 	if (tsc_wires > 0) {
-		tscadc->tsc_wires = tsc_wires;
+		tscadc->ctrl |= CNTRLREG_TSCENB;
 		if (tsc_wires == 5)
-			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
+			tscadc->ctrl |= CNTRLREG_5WIRE;
 		else
-			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
+			tscadc->ctrl |= CNTRLREG_4WIRE;
 	}
-	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
+	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
 
 	tscadc_idle_config(tscadc);
 
 	/* Enable the TSC module enable bit */
-	ctrl |= CNTRLREG_TSCSSENB;
-	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
+	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_TSCSSENB);
 
 	/* TSC Cell */
 	if (tsc_wires > 0) {
@@ -307,27 +310,13 @@ static int __maybe_unused tscadc_suspend(struct device *dev)
 static int __maybe_unused tscadc_resume(struct device *dev)
 {
 	struct ti_tscadc_dev *tscadc = dev_get_drvdata(dev);
-	u32 ctrl;
 
 	pm_runtime_get_sync(dev);
 
-	/* context restore */
 	regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
-
-	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
-	if (tscadc->tsc_wires > 0) {
-		if (tscadc->tsc_wires == 5)
-			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
-		else
-			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
-	}
-
-	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
-
+	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
 	tscadc_idle_config(tscadc);
-
-	ctrl |= CNTRLREG_TSCSSENB;
-	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
+	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_TSCSSENB);
 
 	return 0;
 }
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 23442059d271..c9c6f0b29181 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -177,8 +177,8 @@ struct ti_tscadc_dev {
 	phys_addr_t tscadc_phys_base;
 	const struct ti_tscadc_data *data;
 	int irq;
-	int tsc_wires;
 	struct mfd_cell cells[TSCADC_CELLS];
+	u32 ctrl;
 	u32 reg_se_cache;
 	bool adc_waiting;
 	bool adc_in_use;
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 23/48] mfd: ti_am335x_tscadc: Replace the header license text with SPDX tag
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (21 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 22/48] mfd: ti_am335x_tscadc: Gather the ctrl register logic in one place Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 24/48] mfd: ti_am335x_tscadc: Fix header spacing Miquel Raynal
                   ` (24 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Drop the text license and replace it with an equivalent SPDX license tag
identifier.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 include/linux/mfd/ti_am335x_tscadc.h | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index c9c6f0b29181..2b8a5f58a3b6 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -1,21 +1,13 @@
-#ifndef __LINUX_TI_AM335X_TSCADC_MFD_H
-#define __LINUX_TI_AM335X_TSCADC_MFD_H
-
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * TI Touch Screen / ADC MFD driver
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
+#ifndef __LINUX_TI_AM335X_TSCADC_MFD_H
+#define __LINUX_TI_AM335X_TSCADC_MFD_H
+
 #include <linux/mfd/core.h>
 
 #define REG_RAWIRQSTATUS	0x024
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 24/48] mfd: ti_am335x_tscadc: Fix header spacing
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (22 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 23/48] mfd: ti_am335x_tscadc: Replace the header license text with SPDX tag Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 25/48] mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro Miquel Raynal
                   ` (23 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Harmonize the spacing within macro definitions.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 include/linux/mfd/ti_am335x_tscadc.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 2b8a5f58a3b6..893c474c1f8c 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -41,7 +41,7 @@
 /* Step Enable */
 #define STEPENB_MASK		(0x1FFFF << 0)
 #define STEPENB(val)		((val) << 0)
-#define ENB(val)			(1 << (val))
+#define ENB(val)		(1 << (val))
 #define STPENB_STEPENB		STEPENB(0x1FFFF)
 #define STPENB_STEPENB_TC	STEPENB(0x1FFF)
 
@@ -122,15 +122,15 @@
 #define CNTRLREG_TSCENB		BIT(7)
 
 /* FIFO READ Register */
-#define FIFOREAD_DATA_MASK (0xfff << 0)
-#define FIFOREAD_CHNLID_MASK (0xf << 16)
+#define FIFOREAD_DATA_MASK	(0xfff << 0)
+#define FIFOREAD_CHNLID_MASK	(0xf << 16)
 
 /* DMA ENABLE/CLEAR Register */
 #define DMA_FIFO0		BIT(0)
 #define DMA_FIFO1		BIT(1)
 
 /* Sequencer Status */
-#define SEQ_STATUS BIT(5)
+#define SEQ_STATUS		BIT(5)
 #define CHARGE_STEP		0x11
 
 #define ADC_CLK			3000000
@@ -150,7 +150,7 @@
  *
  * max processing time: 266431 * 308ns = 83ms(approx)
  */
-#define IDLE_TIMEOUT 83 /* milliseconds */
+#define IDLE_TIMEOUT		83 /* milliseconds */
 
 #define TSCADC_CELLS		2
 
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 25/48] mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (23 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 24/48] mfd: ti_am335x_tscadc: Fix header spacing Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-29 15:29   ` Jonathan Cameron
  2021-09-28 13:31 ` [PATCH v4 26/48] mfd: ti_am335x_tscadc: Drop unused definitions from the header Miquel Raynal
                   ` (22 subsequent siblings)
  47 siblings, 1 reply; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal

Before adding another frequency with even more zeroes, use the
HZ_PER_MHZ macro to clarify the number.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 include/linux/mfd/ti_am335x_tscadc.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 893c474c1f8c..a85643677bef 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -9,6 +9,7 @@
 #define __LINUX_TI_AM335X_TSCADC_MFD_H
 
 #include <linux/mfd/core.h>
+#include <linux/units.h>
 
 #define REG_RAWIRQSTATUS	0x024
 #define REG_IRQSTATUS		0x028
@@ -133,7 +134,7 @@
 #define SEQ_STATUS		BIT(5)
 #define CHARGE_STEP		0x11
 
-#define ADC_CLK			3000000
+#define ADC_CLK			(3 * HZ_PER_MHZ)
 #define TOTAL_STEPS		16
 #define TOTAL_CHANNELS		8
 #define FIFO1_THRESHOLD		19
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 26/48] mfd: ti_am335x_tscadc: Drop unused definitions from the header
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (24 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 25/48] mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 27/48] mfd: ti_am335x_tscadc: Use BIT(), GENMASK() and FIELD_PREP() when relevant Miquel Raynal
                   ` (21 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

The STEP ENABLE definitions are highly unclear and not used so drop them.

Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 include/linux/mfd/ti_am335x_tscadc.h | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index a85643677bef..1cd8cd34f2b7 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -39,13 +39,6 @@
 /* IRQ wakeup enable */
 #define IRQWKUP_ENB		BIT(0)
 
-/* Step Enable */
-#define STEPENB_MASK		(0x1FFFF << 0)
-#define STEPENB(val)		((val) << 0)
-#define ENB(val)		(1 << (val))
-#define STPENB_STEPENB		STEPENB(0x1FFFF)
-#define STPENB_STEPENB_TC	STEPENB(0x1FFF)
-
 /* IRQ enable */
 #define IRQENB_HW_PEN		BIT(0)
 #define IRQENB_EOS		BIT(1)
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 27/48] mfd: ti_am335x_tscadc: Use BIT(), GENMASK() and FIELD_PREP() when relevant
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (25 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 26/48] mfd: ti_am335x_tscadc: Drop unused definitions from the header Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 28/48] mfd: ti_am335x_tscadc: Clarify the maximum values for DT entries Miquel Raynal
                   ` (20 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Clean the ti_am335x_tscadc.h header by:
* converting masks to GENMASK()
* converting regular shifts to BIT()
* using FIELD_PREP() when relevant

Sometimes reorder the lines to be able to use the relevant bitmask.

Mind the s/%d/%ld/ change in a log due to the type change following the
use of FIELD_PREP() in the header.

Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti_am335x_adc.c      |  2 +-
 include/linux/mfd/ti_am335x_tscadc.h | 61 ++++++++++++++--------------
 2 files changed, 32 insertions(+), 31 deletions(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 855cc2d64ac8..3dec115e68ee 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -126,7 +126,7 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 		chan = adc_dev->channel_line[i];
 
 		if (adc_dev->step_avg[i] > STEPCONFIG_AVG_16) {
-			dev_warn(dev, "chan %d step_avg truncating to %d\n",
+			dev_warn(dev, "chan %d step_avg truncating to %ld\n",
 				 chan, STEPCONFIG_AVG_16);
 			adc_dev->step_avg[i] = STEPCONFIG_AVG_16;
 		}
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 1cd8cd34f2b7..ae694fa2d711 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -8,6 +8,7 @@
 #ifndef __LINUX_TI_AM335X_TSCADC_MFD_H
 #define __LINUX_TI_AM335X_TSCADC_MFD_H
 
+#include <linux/bitfield.h>
 #include <linux/mfd/core.h>
 #include <linux/units.h>
 
@@ -51,12 +52,12 @@
 #define IRQENB_PENUP		BIT(9)
 
 /* Step Configuration */
-#define STEPCONFIG_MODE_MASK	(3 << 0)
-#define STEPCONFIG_MODE(val)	((val) << 0)
+#define STEPCONFIG_MODE_MASK	GENMASK(1, 0)
+#define STEPCONFIG_MODE(val)	FIELD_PREP(STEPCONFIG_MODE_MASK, (val))
 #define STEPCONFIG_MODE_SWCNT	STEPCONFIG_MODE(1)
 #define STEPCONFIG_MODE_HWSYNC	STEPCONFIG_MODE(2)
-#define STEPCONFIG_AVG_MASK	(7 << 2)
-#define STEPCONFIG_AVG(val)	((val) << 2)
+#define STEPCONFIG_AVG_MASK	GENMASK(4, 2)
+#define STEPCONFIG_AVG(val)	FIELD_PREP(STEPCONFIG_AVG_MASK, (val))
 #define STEPCONFIG_AVG_16	STEPCONFIG_AVG(4)
 #define STEPCONFIG_XPP		BIT(5)
 #define STEPCONFIG_XNN		BIT(6)
@@ -64,43 +65,43 @@
 #define STEPCONFIG_YNN		BIT(8)
 #define STEPCONFIG_XNP		BIT(9)
 #define STEPCONFIG_YPN		BIT(10)
-#define STEPCONFIG_RFP(val)	((val) << 12)
-#define STEPCONFIG_RFP_VREFP	(0x3 << 12)
-#define STEPCONFIG_INM_MASK	(0xF << 15)
-#define STEPCONFIG_INM(val)	((val) << 15)
+#define STEPCONFIG_RFP_VREFP	GENMASK(13, 12)
+#define STEPCONFIG_RFP(val)	FIELD_PREP(STEPCONFIG_RFP_VREFP, (val))
+#define STEPCONFIG_INM_MASK	GENMASK(18, 15)
+#define STEPCONFIG_INM(val)	FIELD_PREP(STEPCONFIG_INM_MASK, (val))
 #define STEPCONFIG_INM_ADCREFM	STEPCONFIG_INM(8)
-#define STEPCONFIG_INP_MASK	(0xF << 19)
-#define STEPCONFIG_INP(val)	((val) << 19)
+#define STEPCONFIG_INP_MASK	GENMASK(22, 19)
+#define STEPCONFIG_INP(val)	FIELD_PREP(STEPCONFIG_INP_MASK, (val))
 #define STEPCONFIG_INP_AN4	STEPCONFIG_INP(4)
 #define STEPCONFIG_INP_ADCREFM	STEPCONFIG_INP(8)
 #define STEPCONFIG_FIFO1	BIT(26)
-#define STEPCONFIG_RFM(val)	((val) << 23)
-#define STEPCONFIG_RFM_VREFN	(0x3 << 23)
+#define STEPCONFIG_RFM_VREFN	GENMASK(24, 23)
+#define STEPCONFIG_RFM(val)	FIELD_PREP(STEPCONFIG_RFM_VREFN, (val))
 
 /* Delay register */
-#define STEPDELAY_OPEN_MASK	(0x3FFFF << 0)
-#define STEPDELAY_OPEN(val)	((val) << 0)
+#define STEPDELAY_OPEN_MASK	GENMASK(17, 0)
+#define STEPDELAY_OPEN(val)	FIELD_PREP(STEPDELAY_OPEN_MASK, (val))
 #define STEPCONFIG_OPENDLY	STEPDELAY_OPEN(0x098)
-#define STEPDELAY_SAMPLE_MASK	(0xFF << 24)
-#define STEPDELAY_SAMPLE(val)	((val) << 24)
+#define STEPDELAY_SAMPLE_MASK	GENMASK(31, 24)
+#define STEPDELAY_SAMPLE(val)	FIELD_PREP(STEPDELAY_SAMPLE_MASK, (val))
 #define STEPCONFIG_SAMPLEDLY	STEPDELAY_SAMPLE(0)
 
 /* Charge Config */
-#define STEPCHARGE_RFP_MASK	(7 << 12)
-#define STEPCHARGE_RFP(val)	((val) << 12)
+#define STEPCHARGE_RFP_MASK	GENMASK(14, 12)
+#define STEPCHARGE_RFP(val)	FIELD_PREP(STEPCHARGE_RFP_MASK, (val))
 #define STEPCHARGE_RFP_XPUL	STEPCHARGE_RFP(1)
-#define STEPCHARGE_INM_MASK	(0xF << 15)
-#define STEPCHARGE_INM(val)	((val) << 15)
+#define STEPCHARGE_INM_MASK	GENMASK(18, 15)
+#define STEPCHARGE_INM(val)	FIELD_PREP(STEPCHARGE_INM_MASK, (val))
 #define STEPCHARGE_INM_AN1	STEPCHARGE_INM(1)
-#define STEPCHARGE_INP_MASK	(0xF << 19)
-#define STEPCHARGE_INP(val)	((val) << 19)
-#define STEPCHARGE_RFM_MASK	(3 << 23)
-#define STEPCHARGE_RFM(val)	((val) << 23)
+#define STEPCHARGE_INP_MASK	GENMASK(22, 19)
+#define STEPCHARGE_INP(val)	FIELD_PREP(STEPCHARGE_INP_MASK, (val))
+#define STEPCHARGE_RFM_MASK	GENMASK(24, 23)
+#define STEPCHARGE_RFM(val)	FIELD_PREP(STEPCHARGE_RFM_MASK, (val))
 #define STEPCHARGE_RFM_XNUR	STEPCHARGE_RFM(1)
 
 /* Charge delay */
-#define CHARGEDLY_OPEN_MASK	(0x3FFFF << 0)
-#define CHARGEDLY_OPEN(val)	((val) << 0)
+#define CHARGEDLY_OPEN_MASK	GENMASK(17, 0)
+#define CHARGEDLY_OPEN(val)	FIELD_PREP(CHARGEDLY_OPEN_MASK, (val))
 #define CHARGEDLY_OPENDLY	CHARGEDLY_OPEN(0x400)
 
 /* Control register */
@@ -108,16 +109,16 @@
 #define CNTRLREG_STEPID		BIT(1)
 #define CNTRLREG_STEPCONFIGWRT	BIT(2)
 #define CNTRLREG_POWERDOWN	BIT(4)
-#define CNTRLREG_AFE_CTRL_MASK	(3 << 5)
-#define CNTRLREG_AFE_CTRL(val)	((val) << 5)
+#define CNTRLREG_AFE_CTRL_MASK	GENMASK(6, 5)
+#define CNTRLREG_AFE_CTRL(val)	FIELD_PREP(CNTRLREG_AFE_CTRL_MASK, (val))
 #define CNTRLREG_4WIRE		CNTRLREG_AFE_CTRL(1)
 #define CNTRLREG_5WIRE		CNTRLREG_AFE_CTRL(2)
 #define CNTRLREG_8WIRE		CNTRLREG_AFE_CTRL(3)
 #define CNTRLREG_TSCENB		BIT(7)
 
 /* FIFO READ Register */
-#define FIFOREAD_DATA_MASK	(0xfff << 0)
-#define FIFOREAD_CHNLID_MASK	(0xf << 16)
+#define FIFOREAD_DATA_MASK	GENMASK(11, 0)
+#define FIFOREAD_CHNLID_MASK	GENMASK(19, 16)
 
 /* DMA ENABLE/CLEAR Register */
 #define DMA_FIFO0		BIT(0)
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 28/48] mfd: ti_am335x_tscadc: Clarify the maximum values for DT entries
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (26 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 27/48] mfd: ti_am335x_tscadc: Use BIT(), GENMASK() and FIELD_PREP() when relevant Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 29/48] mfd: ti_am335x_tscadc: Drop useless definitions from the header Miquel Raynal
                   ` (19 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Clearly define the maximum open delay and sample delay. Use these
definitions in place of a mask (which works because this is the first
field in the register) and an open-coded value. While at it reword a
little bit the error messages to make them look clearer and similar.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti_am335x_adc.c      | 18 +++++++++---------
 include/linux/mfd/ti_am335x_tscadc.h |  2 ++
 2 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 3dec115e68ee..a241e6fa3564 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -126,7 +126,7 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 		chan = adc_dev->channel_line[i];
 
 		if (adc_dev->step_avg[i] > STEPCONFIG_AVG_16) {
-			dev_warn(dev, "chan %d step_avg truncating to %ld\n",
+			dev_warn(dev, "chan %d: wrong step avg, truncated to %ld\n",
 				 chan, STEPCONFIG_AVG_16);
 			adc_dev->step_avg[i] = STEPCONFIG_AVG_16;
 		}
@@ -147,16 +147,16 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 				STEPCONFIG_RFP_VREFP |
 				STEPCONFIG_RFM_VREFN);
 
-		if (adc_dev->open_delay[i] > STEPDELAY_OPEN_MASK) {
-			dev_warn(dev, "chan %d open delay truncating to 0x3FFFF\n",
-				 chan);
-			adc_dev->open_delay[i] = STEPDELAY_OPEN_MASK;
+		if (adc_dev->open_delay[i] > STEPCONFIG_MAX_OPENDLY) {
+			dev_warn(dev, "chan %d: wrong open delay, truncated to 0x%lX\n",
+				 chan, STEPCONFIG_MAX_OPENDLY);
+			adc_dev->open_delay[i] = STEPCONFIG_MAX_OPENDLY;
 		}
 
-		if (adc_dev->sample_delay[i] > 0xFF) {
-			dev_warn(dev, "chan %d sample delay truncating to 0xFF\n",
-				 chan);
-			adc_dev->sample_delay[i] = 0xFF;
+		if (adc_dev->sample_delay[i] > STEPCONFIG_MAX_SAMPLE) {
+			dev_warn(dev, "chan %d: wrong sample delay, truncated to 0x%lX\n",
+				 chan, STEPCONFIG_MAX_SAMPLE);
+			adc_dev->sample_delay[i] = STEPCONFIG_MAX_SAMPLE;
 		}
 
 		tiadc_writel(adc_dev, REG_STEPDELAY(steps),
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index ae694fa2d711..31cffb6e8b17 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -84,7 +84,9 @@
 #define STEPCONFIG_OPENDLY	STEPDELAY_OPEN(0x098)
 #define STEPDELAY_SAMPLE_MASK	GENMASK(31, 24)
 #define STEPDELAY_SAMPLE(val)	FIELD_PREP(STEPDELAY_SAMPLE_MASK, (val))
+#define STEPCONFIG_MAX_OPENDLY	GENMASK(17, 0)
 #define STEPCONFIG_SAMPLEDLY	STEPDELAY_SAMPLE(0)
+#define STEPCONFIG_MAX_SAMPLE	GENMASK(7, 0)
 
 /* Charge Config */
 #define STEPCHARGE_RFP_MASK	GENMASK(14, 12)
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 29/48] mfd: ti_am335x_tscadc: Drop useless definitions from the header
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (27 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 28/48] mfd: ti_am335x_tscadc: Clarify the maximum values for DT entries Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 30/48] mfd: ti_am335x_tscadc: Rename the subsystem enable macro Miquel Raynal
                   ` (18 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Drop useless definitions from the header like the "masks" definitions
which are only used by the following definition.

It could be possible to got even further by removing these definitions
entirely and use FIELD_PREP() macros from the code directly, but while I
have no troubles making these changes in the header, changing the values
in the code directly could darkening a bit the logic and
hardening future git-blames for very little added value IMHO (but this
is of course a personal taste).

Certain macros are using GENMASK() to define the value of a particular
field, while this is purely "by chance" that the value and the mask have
the same value. In this case, drop the "mask" definition, use
FIELD_PREP() and GENMASK() in the macro defining the field, and use the
new macro to define the particular value by feeding directly the actual
number advertised in the datasheet into that macro, as in:
	-#define STEPCONFIG_RFM_VREFN   GENMASK(24, 23)
	-#define STEPCONFIG_RFM(val)    FIELD_PREP(STEPCONFIG_RFM_VREFN, (val))
	+#define STEPCONFIG_RFM(val)    FIELD_PREP(GENMASK(24, 23), (val))
	+#define STEPCONFIG_RFM_VREFN   STEPCONFIG_RFM(3)

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 include/linux/mfd/ti_am335x_tscadc.h | 44 ++++++++++------------------
 1 file changed, 16 insertions(+), 28 deletions(-)

diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 31cffb6e8b17..51d987080cd3 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -52,12 +52,10 @@
 #define IRQENB_PENUP		BIT(9)
 
 /* Step Configuration */
-#define STEPCONFIG_MODE_MASK	GENMASK(1, 0)
-#define STEPCONFIG_MODE(val)	FIELD_PREP(STEPCONFIG_MODE_MASK, (val))
+#define STEPCONFIG_MODE(val)	FIELD_PREP(GENMASK(1, 0), (val))
 #define STEPCONFIG_MODE_SWCNT	STEPCONFIG_MODE(1)
 #define STEPCONFIG_MODE_HWSYNC	STEPCONFIG_MODE(2)
-#define STEPCONFIG_AVG_MASK	GENMASK(4, 2)
-#define STEPCONFIG_AVG(val)	FIELD_PREP(STEPCONFIG_AVG_MASK, (val))
+#define STEPCONFIG_AVG(val)	FIELD_PREP(GENMASK(4, 2), (val))
 #define STEPCONFIG_AVG_16	STEPCONFIG_AVG(4)
 #define STEPCONFIG_XPP		BIT(5)
 #define STEPCONFIG_XNN		BIT(6)
@@ -65,45 +63,36 @@
 #define STEPCONFIG_YNN		BIT(8)
 #define STEPCONFIG_XNP		BIT(9)
 #define STEPCONFIG_YPN		BIT(10)
-#define STEPCONFIG_RFP_VREFP	GENMASK(13, 12)
-#define STEPCONFIG_RFP(val)	FIELD_PREP(STEPCONFIG_RFP_VREFP, (val))
-#define STEPCONFIG_INM_MASK	GENMASK(18, 15)
-#define STEPCONFIG_INM(val)	FIELD_PREP(STEPCONFIG_INM_MASK, (val))
+#define STEPCONFIG_RFP(val)	FIELD_PREP(GENMASK(13, 12), (val))
+#define STEPCONFIG_RFP_VREFP	STEPCONFIG_RFP(3)
+#define STEPCONFIG_INM(val)	FIELD_PREP(GENMASK(18, 15), (val))
 #define STEPCONFIG_INM_ADCREFM	STEPCONFIG_INM(8)
-#define STEPCONFIG_INP_MASK	GENMASK(22, 19)
-#define STEPCONFIG_INP(val)	FIELD_PREP(STEPCONFIG_INP_MASK, (val))
+#define STEPCONFIG_INP(val)	FIELD_PREP(GENMASK(22, 19), (val))
 #define STEPCONFIG_INP_AN4	STEPCONFIG_INP(4)
 #define STEPCONFIG_INP_ADCREFM	STEPCONFIG_INP(8)
 #define STEPCONFIG_FIFO1	BIT(26)
-#define STEPCONFIG_RFM_VREFN	GENMASK(24, 23)
-#define STEPCONFIG_RFM(val)	FIELD_PREP(STEPCONFIG_RFM_VREFN, (val))
+#define STEPCONFIG_RFM(val)	FIELD_PREP(GENMASK(24, 23), (val))
+#define STEPCONFIG_RFM_VREFN	STEPCONFIG_RFM(3)
 
 /* Delay register */
-#define STEPDELAY_OPEN_MASK	GENMASK(17, 0)
-#define STEPDELAY_OPEN(val)	FIELD_PREP(STEPDELAY_OPEN_MASK, (val))
+#define STEPDELAY_OPEN(val)	FIELD_PREP(GENMASK(17, 0), (val))
 #define STEPCONFIG_OPENDLY	STEPDELAY_OPEN(0x098)
-#define STEPDELAY_SAMPLE_MASK	GENMASK(31, 24)
-#define STEPDELAY_SAMPLE(val)	FIELD_PREP(STEPDELAY_SAMPLE_MASK, (val))
 #define STEPCONFIG_MAX_OPENDLY	GENMASK(17, 0)
+#define STEPDELAY_SAMPLE(val)	FIELD_PREP(GENMASK(31, 24), (val))
 #define STEPCONFIG_SAMPLEDLY	STEPDELAY_SAMPLE(0)
 #define STEPCONFIG_MAX_SAMPLE	GENMASK(7, 0)
 
 /* Charge Config */
-#define STEPCHARGE_RFP_MASK	GENMASK(14, 12)
-#define STEPCHARGE_RFP(val)	FIELD_PREP(STEPCHARGE_RFP_MASK, (val))
+#define STEPCHARGE_RFP(val)	FIELD_PREP(GENMASK(14, 12), (val))
 #define STEPCHARGE_RFP_XPUL	STEPCHARGE_RFP(1)
-#define STEPCHARGE_INM_MASK	GENMASK(18, 15)
-#define STEPCHARGE_INM(val)	FIELD_PREP(STEPCHARGE_INM_MASK, (val))
+#define STEPCHARGE_INM(val)	FIELD_PREP(GENMASK(18, 15), (val))
 #define STEPCHARGE_INM_AN1	STEPCHARGE_INM(1)
-#define STEPCHARGE_INP_MASK	GENMASK(22, 19)
-#define STEPCHARGE_INP(val)	FIELD_PREP(STEPCHARGE_INP_MASK, (val))
-#define STEPCHARGE_RFM_MASK	GENMASK(24, 23)
-#define STEPCHARGE_RFM(val)	FIELD_PREP(STEPCHARGE_RFM_MASK, (val))
+#define STEPCHARGE_INP(val)	FIELD_PREP(GENMASK(22, 19), (val))
+#define STEPCHARGE_RFM(val)	FIELD_PREP(GENMASK(24, 23), (val))
 #define STEPCHARGE_RFM_XNUR	STEPCHARGE_RFM(1)
 
 /* Charge delay */
-#define CHARGEDLY_OPEN_MASK	GENMASK(17, 0)
-#define CHARGEDLY_OPEN(val)	FIELD_PREP(CHARGEDLY_OPEN_MASK, (val))
+#define CHARGEDLY_OPEN(val)	FIELD_PREP(GENMASK(17, 0), (val))
 #define CHARGEDLY_OPENDLY	CHARGEDLY_OPEN(0x400)
 
 /* Control register */
@@ -111,8 +100,7 @@
 #define CNTRLREG_STEPID		BIT(1)
 #define CNTRLREG_STEPCONFIGWRT	BIT(2)
 #define CNTRLREG_POWERDOWN	BIT(4)
-#define CNTRLREG_AFE_CTRL_MASK	GENMASK(6, 5)
-#define CNTRLREG_AFE_CTRL(val)	FIELD_PREP(CNTRLREG_AFE_CTRL_MASK, (val))
+#define CNTRLREG_AFE_CTRL(val)	FIELD_PREP(GENMASK(6, 5), (val))
 #define CNTRLREG_4WIRE		CNTRLREG_AFE_CTRL(1)
 #define CNTRLREG_5WIRE		CNTRLREG_AFE_CTRL(2)
 #define CNTRLREG_8WIRE		CNTRLREG_AFE_CTRL(3)
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 30/48] mfd: ti_am335x_tscadc: Rename the subsystem enable macro
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (28 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 29/48] mfd: ti_am335x_tscadc: Drop useless definitions from the header Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 31/48] mfd: ti_am335x_tscadc: Add TSC prefix in certain macros Miquel Raynal
                   ` (17 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

This bit is common to all devices (ADC, Touchscreen, Magnetic reader) so
make it clear that it can be used from any location by operating a
mechanical rename:
s/CNTRLREG_TSCSSENB/CNTRLREG_SSENB/

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti_am335x_adc.c      | 6 +++---
 drivers/mfd/ti_am335x_tscadc.c       | 6 +++---
 include/linux/mfd/ti_am335x_tscadc.h | 2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index a241e6fa3564..1cc2efbb2875 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -184,7 +184,7 @@ static irqreturn_t tiadc_irq_h(int irq, void *private)
 	if (status & IRQENB_FIFO1OVRRUN) {
 		/* FIFO Overrun. Clear flag. Disable/Enable ADC to recover */
 		config = tiadc_readl(adc_dev, REG_CTRL);
-		config &= ~(CNTRLREG_TSCSSENB);
+		config &= ~(CNTRLREG_SSENB);
 		tiadc_writel(adc_dev, REG_CTRL, config);
 		tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN
 				| IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES);
@@ -197,7 +197,7 @@ static irqreturn_t tiadc_irq_h(int irq, void *private)
 			adc_fsm = tiadc_readl(adc_dev, REG_ADCFSM);
 		} while (adc_fsm != 0x10 && count++ < 100);
 
-		tiadc_writel(adc_dev, REG_CTRL, (config | CNTRLREG_TSCSSENB));
+		tiadc_writel(adc_dev, REG_CTRL, (config | CNTRLREG_SSENB));
 		return IRQ_HANDLED;
 	} else if (status & IRQENB_FIFO1THRES) {
 		/* Disable irq and wake worker thread */
@@ -671,7 +671,7 @@ static int __maybe_unused tiadc_suspend(struct device *dev)
 	unsigned int idle;
 
 	idle = tiadc_readl(adc_dev, REG_CTRL);
-	idle &= ~(CNTRLREG_TSCSSENB);
+	idle &= ~(CNTRLREG_SSENB);
 	tiadc_writel(adc_dev, REG_CTRL, (idle |
 			CNTRLREG_POWERDOWN));
 
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index df4f905a7b52..a34ca378e82c 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -235,7 +235,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	tscadc_idle_config(tscadc);
 
 	/* Enable the TSC module enable bit */
-	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_TSCSSENB);
+	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_SSENB);
 
 	/* TSC Cell */
 	if (tsc_wires > 0) {
@@ -299,7 +299,7 @@ static int __maybe_unused tscadc_suspend(struct device *dev)
 
 		regmap_read(tscadc->regmap, REG_CTRL, &ctrl);
 		ctrl &= ~(CNTRLREG_POWERDOWN);
-		ctrl |= CNTRLREG_TSCSSENB;
+		ctrl |= CNTRLREG_SSENB;
 		regmap_write(tscadc->regmap, REG_CTRL, ctrl);
 	}
 	pm_runtime_put_sync(dev);
@@ -316,7 +316,7 @@ static int __maybe_unused tscadc_resume(struct device *dev)
 	regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
 	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
 	tscadc_idle_config(tscadc);
-	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_TSCSSENB);
+	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_SSENB);
 
 	return 0;
 }
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 51d987080cd3..860289ae8516 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -96,7 +96,7 @@
 #define CHARGEDLY_OPENDLY	CHARGEDLY_OPEN(0x400)
 
 /* Control register */
-#define CNTRLREG_TSCSSENB	BIT(0)
+#define CNTRLREG_SSENB		BIT(0)
 #define CNTRLREG_STEPID		BIT(1)
 #define CNTRLREG_STEPCONFIGWRT	BIT(2)
 #define CNTRLREG_POWERDOWN	BIT(4)
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 31/48] mfd: ti_am335x_tscadc: Add TSC prefix in certain macros
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (29 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 30/48] mfd: ti_am335x_tscadc: Rename the subsystem enable macro Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 32/48] mfd: ti_am335x_tscadc: Rename a variable Miquel Raynal
                   ` (16 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

While the register list (and names) between ADC0 and ADC1 are pretty
close, the bits inside changed a little bit. To avoid any future
confusion, let's add the TSC prefix when some bits are in a register
that is common to both revisions of the ADC, but are specific to the
am33xx hardware.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c       | 10 +++++-----
 include/linux/mfd/ti_am335x_tscadc.h | 14 +++++++-------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index a34ca378e82c..ffd52e021c2c 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -222,13 +222,13 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	 * of the CTRL register but not the subsystem enable bit which must be
 	 * added manually when timely.
 	 */
-	tscadc->ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_STEPID;
+	tscadc->ctrl = CNTRLREG_TSC_STEPCONFIGWRT | CNTRLREG_STEPID;
 	if (tsc_wires > 0) {
-		tscadc->ctrl |= CNTRLREG_TSCENB;
+		tscadc->ctrl |= CNTRLREG_TSC_ENB;
 		if (tsc_wires == 5)
-			tscadc->ctrl |= CNTRLREG_5WIRE;
+			tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
 		else
-			tscadc->ctrl |= CNTRLREG_4WIRE;
+			tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
 	}
 	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
 
@@ -328,7 +328,7 @@ static const struct ti_tscadc_data tscdata = {
 	.adc_feature_compatible = "ti,am3359-adc",
 	.secondary_feature_name = "TI-am335x-tsc",
 	.secondary_feature_compatible = "ti,am3359-tsc",
-	.target_clk_rate = ADC_CLK,
+	.target_clk_rate = TSC_ADC_CLK,
 };
 
 static const struct of_device_id ti_tscadc_dt_ids[] = {
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 860289ae8516..cc6de9258455 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -98,13 +98,13 @@
 /* Control register */
 #define CNTRLREG_SSENB		BIT(0)
 #define CNTRLREG_STEPID		BIT(1)
-#define CNTRLREG_STEPCONFIGWRT	BIT(2)
+#define CNTRLREG_TSC_STEPCONFIGWRT BIT(2)
 #define CNTRLREG_POWERDOWN	BIT(4)
-#define CNTRLREG_AFE_CTRL(val)	FIELD_PREP(GENMASK(6, 5), (val))
-#define CNTRLREG_4WIRE		CNTRLREG_AFE_CTRL(1)
-#define CNTRLREG_5WIRE		CNTRLREG_AFE_CTRL(2)
-#define CNTRLREG_8WIRE		CNTRLREG_AFE_CTRL(3)
-#define CNTRLREG_TSCENB		BIT(7)
+#define CNTRLREG_TSC_AFE_CTRL(val) FIELD_PREP(GENMASK(6, 5), (val))
+#define CNTRLREG_TSC_4WIRE	CNTRLREG_TSC_AFE_CTRL(1)
+#define CNTRLREG_TSC_5WIRE	CNTRLREG_TSC_AFE_CTRL(2)
+#define CNTRLREG_TSC_8WIRE	CNTRLREG_TSC_AFE_CTRL(3)
+#define CNTRLREG_TSC_ENB	BIT(7)
 
 /* FIFO READ Register */
 #define FIFOREAD_DATA_MASK	GENMASK(11, 0)
@@ -118,7 +118,7 @@
 #define SEQ_STATUS		BIT(5)
 #define CHARGE_STEP		0x11
 
-#define ADC_CLK			(3 * HZ_PER_MHZ)
+#define TSC_ADC_CLK		(3 * HZ_PER_MHZ)
 #define TOTAL_STEPS		16
 #define TOTAL_CHANNELS		8
 #define FIFO1_THRESHOLD		19
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 32/48] mfd: ti_am335x_tscadc: Rename a variable
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (30 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 31/48] mfd: ti_am335x_tscadc: Add TSC prefix in certain macros Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 33/48] mfd: ti_am335x_tscadc: Fix an error message Miquel Raynal
                   ` (15 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

We need to retrieve the number of wires used by the "secondary" device
(the touchscreen or the magnetic reader). Let's rename tsc_wires to
become tscmag_wires to clarify the fact that this variable can be used
in both situations.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index ffd52e021c2c..70a423e57067 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -122,7 +122,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	const __be32 *cur;
 	u32 val;
 	int err;
-	int tsc_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
+	int tscmag_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
 	int readouts = 0;
 
 	/* Allocate memory for device */
@@ -140,7 +140,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	tscadc->data = of_device_get_match_data(&pdev->dev);
 
 	node = of_get_child_by_name(pdev->dev.of_node, "tsc");
-	of_property_read_u32(node, "ti,wires", &tsc_wires);
+	of_property_read_u32(node, "ti,wires", &tscmag_wires);
 	of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
 	of_node_put(node);
 
@@ -157,7 +157,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 
 	of_node_put(node);
 
-	total_channels = tsc_wires + adc_channels;
+	total_channels = tscmag_wires + adc_channels;
 	if (total_channels > 8) {
 		dev_err(&pdev->dev, "Number of i/p channels more than 8\n");
 		return -EINVAL;
@@ -223,9 +223,9 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	 * added manually when timely.
 	 */
 	tscadc->ctrl = CNTRLREG_TSC_STEPCONFIGWRT | CNTRLREG_STEPID;
-	if (tsc_wires > 0) {
+	if (tscmag_wires > 0) {
 		tscadc->ctrl |= CNTRLREG_TSC_ENB;
-		if (tsc_wires == 5)
+		if (tscmag_wires == 5)
 			tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
 		else
 			tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
@@ -238,7 +238,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_SSENB);
 
 	/* TSC Cell */
-	if (tsc_wires > 0) {
+	if (tscmag_wires > 0) {
 		cell = &tscadc->cells[cell_idx++];
 		cell->name = tscadc->data->secondary_feature_name;
 		cell->of_compatible = tscadc->data->secondary_feature_compatible;
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 33/48] mfd: ti_am335x_tscadc: Fix an error message
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (31 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 32/48] mfd: ti_am335x_tscadc: Rename a variable Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 34/48] mfd: ti_am335x_tscadc: Add a boolean to clarify the presence of a touchscreen Miquel Raynal
                   ` (14 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

The error message if we cannot retrieve the clock tells us that the
touchscreen controller clock was unavailable. This is wrong, this is the
"main" clock for the hardware block, it is not specific to the
touchscreen and won't change when we will introduce ADC1/magnetic reader
support so let's correct this comment.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 70a423e57067..9699fe6ca7eb 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -209,7 +209,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	 */
 	clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "failed to get TSC fck\n");
+		dev_err(&pdev->dev, "failed to get fck\n");
 		err = PTR_ERR(clk);
 		goto err_disable_clk;
 	}
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 34/48] mfd: ti_am335x_tscadc: Add a boolean to clarify the presence of a touchscreen
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (32 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 33/48] mfd: ti_am335x_tscadc: Fix an error message Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 35/48] mfd: ti_am335x_tscadc: Introduce a helper to deal with the type of hardware Miquel Raynal
                   ` (13 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Just checking the number of wires will soon not be enough, add a boolean
to indicate the actual use or not of the touchscreen.

Certain checks only make sense when there is a touchscreen wired. Make
these checks explicitly depend on the presence of the touchscreen.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 9699fe6ca7eb..f7cfe2016bbc 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -120,6 +120,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	struct mfd_cell *cell;
 	struct property *prop;
 	const __be32 *cur;
+	bool use_tsc = false;
 	u32 val;
 	int err;
 	int tscmag_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
@@ -143,6 +144,8 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	of_property_read_u32(node, "ti,wires", &tscmag_wires);
 	of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
 	of_node_put(node);
+	if (tscmag_wires)
+		use_tsc = true;
 
 	node = of_get_child_by_name(pdev->dev.of_node, "adc");
 	of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
@@ -168,7 +171,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (readouts * 2 + 2 + adc_channels > 16) {
+	if (use_tsc && (readouts * 2 + 2 + adc_channels > 16)) {
 		dev_err(&pdev->dev, "Too many step configurations requested\n");
 		return -EINVAL;
 	}
@@ -223,7 +226,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	 * added manually when timely.
 	 */
 	tscadc->ctrl = CNTRLREG_TSC_STEPCONFIGWRT | CNTRLREG_STEPID;
-	if (tscmag_wires > 0) {
+	if (use_tsc) {
 		tscadc->ctrl |= CNTRLREG_TSC_ENB;
 		if (tscmag_wires == 5)
 			tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 35/48] mfd: ti_am335x_tscadc: Introduce a helper to deal with the type of hardware
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (33 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 34/48] mfd: ti_am335x_tscadc: Add a boolean to clarify the presence of a touchscreen Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 36/48] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support Miquel Raynal
                   ` (12 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

One way of knowing which hardware we are dealing with is to check the
compatible string. When this must be done at several places, it's best
and certainly more clear to use a helper for that.

Introduce ti_adc_with_touchscreen() to indicate if there is a touchscreen
controller available (meaning it's an am33xx-like ADC). This helper does
not indicate if it is actually used (that is the purpose of the use_tsc
boolean).

Introducing this helper helps making a difference in the code between
what is generic to both types of ADCs and what is specific to the am33xx
hardware before introducing support for the am437x hardware.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c       | 36 ++++++++++++++++------------
 include/linux/mfd/ti_am335x_tscadc.h |  6 +++++
 2 files changed, 27 insertions(+), 15 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index f7cfe2016bbc..4f76b5498077 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -105,8 +105,9 @@ static void tscadc_idle_config(struct ti_tscadc_dev *tscadc)
 {
 	unsigned int idleconfig;
 
-	idleconfig = STEPCONFIG_YNN | STEPCONFIG_INM_ADCREFM |
-			STEPCONFIG_INP_ADCREFM | STEPCONFIG_YPN;
+	idleconfig = STEPCONFIG_INM_ADCREFM | STEPCONFIG_INP_ADCREFM;
+	if (ti_adc_with_touchscreen(tscadc))
+		idleconfig |= STEPCONFIG_YNN | STEPCONFIG_YPN;
 
 	regmap_write(tscadc->regmap, REG_IDLECONFIG, idleconfig);
 }
@@ -140,12 +141,14 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 
 	tscadc->data = of_device_get_match_data(&pdev->dev);
 
-	node = of_get_child_by_name(pdev->dev.of_node, "tsc");
-	of_property_read_u32(node, "ti,wires", &tscmag_wires);
-	of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
-	of_node_put(node);
-	if (tscmag_wires)
-		use_tsc = true;
+	if (ti_adc_with_touchscreen(tscadc)) {
+		node = of_get_child_by_name(pdev->dev.of_node, "tsc");
+		of_property_read_u32(node, "ti,wires", &tscmag_wires);
+		of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
+		of_node_put(node);
+		if (tscmag_wires)
+			use_tsc = true;
+	}
 
 	node = of_get_child_by_name(pdev->dev.of_node, "adc");
 	of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
@@ -225,13 +228,16 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	 * of the CTRL register but not the subsystem enable bit which must be
 	 * added manually when timely.
 	 */
-	tscadc->ctrl = CNTRLREG_TSC_STEPCONFIGWRT | CNTRLREG_STEPID;
-	if (use_tsc) {
-		tscadc->ctrl |= CNTRLREG_TSC_ENB;
-		if (tscmag_wires == 5)
-			tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
-		else
-			tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
+	tscadc->ctrl = CNTRLREG_STEPID;
+	if (ti_adc_with_touchscreen(tscadc)) {
+		tscadc->ctrl |= CNTRLREG_TSC_STEPCONFIGWRT;
+		if (use_tsc) {
+			tscadc->ctrl |= CNTRLREG_TSC_ENB;
+			if (tscmag_wires == 5)
+				tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
+			else
+				tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
+		}
 	}
 	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
 
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index cc6de9258455..ee160b2036c1 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -177,6 +177,12 @@ static inline struct ti_tscadc_dev *ti_tscadc_dev_get(struct platform_device *p)
 	return *tscadc_dev;
 }
 
+static inline bool ti_adc_with_touchscreen(struct ti_tscadc_dev *tscadc)
+{
+	return of_device_is_compatible(tscadc->dev->of_node,
+				       "ti,am3359-tscadc");
+}
+
 void am335x_tsc_se_set_cache(struct ti_tscadc_dev *tsadc, u32 val);
 void am335x_tsc_se_set_once(struct ti_tscadc_dev *tsadc, u32 val);
 void am335x_tsc_se_clr(struct ti_tscadc_dev *tsadc, u32 val);
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 36/48] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (34 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 35/48] mfd: ti_am335x_tscadc: Introduce a helper to deal with the type of hardware Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 22:32   ` kernel test robot
  2021-09-28 13:31 ` [PATCH v4 37/48] mfd: ti_am335x_tscadc: Support the correctly spelled DT property Miquel Raynal
                   ` (11 subsequent siblings)
  47 siblings, 1 reply; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Introduce a new compatible that has another set of driver data,
targeting am437x SoCs with a magnetic reader instead of the
touchscreen and a more featureful set of registers.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c       | 35 +++++++++++++++++++++++-----
 include/linux/mfd/ti_am335x_tscadc.h |  6 +++++
 2 files changed, 35 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 4f76b5498077..6d852ce3be51 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -121,11 +121,11 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	struct mfd_cell *cell;
 	struct property *prop;
 	const __be32 *cur;
-	bool use_tsc = false;
+	bool use_tsc = false, use_mag = false;
 	u32 val;
 	int err;
 	int tscmag_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
-	int readouts = 0;
+	int readouts = 0, mag_tracks = 0;
 
 	/* Allocate memory for device */
 	tscadc = devm_kzalloc(&pdev->dev, sizeof(*tscadc), GFP_KERNEL);
@@ -148,6 +148,16 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		of_node_put(node);
 		if (tscmag_wires)
 			use_tsc = true;
+	} else {
+		/*
+		 * When adding support for the magnetic stripe reader, here is
+		 * the place to look for the number of tracks used from device
+		 * tree. Let's default to 0 for now.
+		 */
+		mag_tracks = 0;
+		tscmag_wires = mag_tracks * 2;
+		if (tscmag_wires)
+			use_mag = true;
 	}
 
 	node = of_get_child_by_name(pdev->dev.of_node, "adc");
@@ -209,8 +219,9 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	 * The TSC_ADC_Subsystem has 2 clock domains: OCP_CLK and ADC_CLK.
 	 * ADCs produce a 12-bit sample every 15 ADC_CLK cycles.
 	 * am33xx ADCs expect to capture 200ksps.
-	 * We need the ADC clocks to run at 3MHz.
-	 * This frequency is valid since TSC_ADC_SS controller design
+	 * am47xx ADCs expect to capture 867ksps.
+	 * We need ADC clocks respectively running at 3MHz and 13MHz.
+	 * These frequencies are valid since TSC_ADC_SS controller design
 	 * assumes the OCP clock is at least 6x faster than the ADC clock.
 	 */
 	clk = devm_clk_get(&pdev->dev, NULL);
@@ -238,6 +249,9 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 			else
 				tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
 		}
+	} else {
+		tscadc->ctrl |= CNTRLREG_MAG_PREAMP_PWRDOWN |
+				CNTRLREG_MAG_PREAMP_BYPASS;
 	}
 	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
 
@@ -246,7 +260,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	/* Enable the TSC module enable bit */
 	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_SSENB);
 
-	/* TSC Cell */
+	/* TSC or MAG Cell */
 	if (tscmag_wires > 0) {
 		cell = &tscadc->cells[cell_idx++];
 		cell->name = tscadc->data->secondary_feature_name;
@@ -340,8 +354,17 @@ static const struct ti_tscadc_data tscdata = {
 	.target_clk_rate = TSC_ADC_CLK,
 };
 
+static const struct ti_tscadc_data magdata = {
+	.adc_feature_name = "TI-am43xx-adc",
+	.adc_feature_compatible = "ti,am4372-adc",
+	.secondary_feature_name = "TI-am43xx-mag",
+	.secondary_feature_compatible = "ti,am4372-mag",
+	.target_clk_rate = MAG_ADC_CLK,
+};
+
 static const struct of_device_id ti_tscadc_dt_ids[] = {
 	{ .compatible = "ti,am3359-tscadc", .data = &tscdata },
+	{ .compatible = "ti,am4372-magadc", .data = &magdata },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ti_tscadc_dt_ids);
@@ -359,6 +382,6 @@ static struct platform_driver ti_tscadc_driver = {
 
 module_platform_driver(ti_tscadc_driver);
 
-MODULE_DESCRIPTION("TI touchscreen / ADC MFD controller driver");
+MODULE_DESCRIPTION("TI touchscreen/magnetic stripe reader/ADC MFD controller driver");
 MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
 MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index ee160b2036c1..5225e3fc194d 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -106,6 +106,11 @@
 #define CNTRLREG_TSC_8WIRE	CNTRLREG_TSC_AFE_CTRL(3)
 #define CNTRLREG_TSC_ENB	BIT(7)
 
+/*Control registers bitfields  for MAGADC IP */
+#define CNTRLREG_MAGADCENB      BIT(0)
+#define CNTRLREG_MAG_PREAMP_PWRDOWN BIT(5)
+#define CNTRLREG_MAG_PREAMP_BYPASS  BIT(6)
+
 /* FIFO READ Register */
 #define FIFOREAD_DATA_MASK	GENMASK(11, 0)
 #define FIFOREAD_CHNLID_MASK	GENMASK(19, 16)
@@ -119,6 +124,7 @@
 #define CHARGE_STEP		0x11
 
 #define TSC_ADC_CLK		(3 * HZ_PER_MHZ)
+#define MAG_ADC_CLK		(13 * HZ_PER_MHZ)
 #define TOTAL_STEPS		16
 #define TOTAL_CHANNELS		8
 #define FIFO1_THRESHOLD		19
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 37/48] mfd: ti_am335x_tscadc: Support the correctly spelled DT property
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (35 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 36/48] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 38/48] iio: adc: ti_am335x_adc: Wait the idle state to avoid stalls Miquel Raynal
                   ` (10 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

There was in the past a typo in the coordinate readouts property. The
bindings have been updated, the touchscreen driver as well and now
supports both. However, the MFD driver that is in charge of verifying
the validity of the property only checks the bogus one. Add support for
the correctly spelled DT property.

Fixes: c9aeb249bf72 ("Input: ti_am335x_tsc - fix spelling mistake in TSC/ADC DT binding")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 6d852ce3be51..dbf6aa012d79 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -144,8 +144,14 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	if (ti_adc_with_touchscreen(tscadc)) {
 		node = of_get_child_by_name(pdev->dev.of_node, "tsc");
 		of_property_read_u32(node, "ti,wires", &tscmag_wires);
-		of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
+		err = of_property_read_u32(node, "ti,coordinate-readouts",
+					   &readouts);
+		if (err < 0)
+			of_property_read_u32(node, "ti,coordiante-readouts",
+					     &readouts);
+
 		of_node_put(node);
+
 		if (tscmag_wires)
 			use_tsc = true;
 	} else {
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 38/48] iio: adc: ti_am335x_adc: Wait the idle state to avoid stalls
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (36 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 37/48] mfd: ti_am335x_tscadc: Support the correctly spelled DT property Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 39/48] iio: adc: ti_am335x_adc: Replace license text with SPDX tag Miquel Raynal
                   ` (9 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

At least on a am4372, a simple:
$ cat /sys/bus/iio/devices/iio\:deviceX/in_voltage*_raw
can stall forever. It seems that it comes from the fact that the
internal state machine does not have enough time to return to its idle
state in this situation before receiving another request, leading to an
internal stall.

Add a tiadc_wait_idle() helper to ensure no new conversion is requested
while the FSM is still busy.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti_am335x_adc.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 1cc2efbb2875..0a4d66a541ed 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -25,6 +25,7 @@
 #include <linux/of_device.h>
 #include <linux/iio/machine.h>
 #include <linux/iio/driver.h>
+#include <linux/iopoll.h>
 
 #include <linux/mfd/ti_am335x_tscadc.h>
 #include <linux/iio/buffer.h>
@@ -102,6 +103,15 @@ static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan)
 	return 1 << adc_dev->channel_step[chan];
 }
 
+static int tiadc_wait_idle(struct tiadc_device *adc_dev)
+{
+	u32 val;
+
+	return readl_poll_timeout(adc_dev->mfd_tscadc->tscadc_base + REG_ADCFSM,
+				  val, !(val & SEQ_STATUS), 10,
+				  IDLE_TIMEOUT * 1000 * adc_dev->channels);
+}
+
 static void tiadc_step_config(struct iio_dev *indio_dev)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
@@ -295,6 +305,11 @@ static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
 	int i, fifo1count;
+	int ret;
+
+	ret = tiadc_wait_idle(adc_dev);
+	if (ret)
+		return ret;
 
 	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
 				IRQENB_FIFO1OVRRUN |
@@ -446,12 +461,12 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 		int *val, int *val2, long mask)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
-	int ret = IIO_VAL_INT;
 	int i, map_val;
 	unsigned int fifo1count, read, stepid;
 	bool found = false;
 	u32 step_en;
 	unsigned long timeout;
+	int ret;
 
 	if (iio_buffer_enabled(indio_dev))
 		return -EBUSY;
@@ -461,6 +476,11 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 		return -EINVAL;
 
 	mutex_lock(&adc_dev->fifo1_lock);
+
+	ret = tiadc_wait_idle(adc_dev);
+	if (ret)
+		goto err_unlock;
+
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 	while (fifo1count--)
 		tiadc_readl(adc_dev, REG_FIFO1);
@@ -508,7 +528,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 
 err_unlock:
 	mutex_unlock(&adc_dev->fifo1_lock);
-	return ret;
+	return ret ? ret : IIO_VAL_INT;
 }
 
 static const struct iio_info tiadc_info = {
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 39/48] iio: adc: ti_am335x_adc: Replace license text with SPDX tag
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (37 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 38/48] iio: adc: ti_am335x_adc: Wait the idle state to avoid stalls Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 40/48] iio: adc: ti_am335x_adc: Fix style Miquel Raynal
                   ` (8 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Drop the text license and replace it with an equivalent SPDX license tag
identifier which also matches the MODULE_LICENSE("GPL").

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti_am335x_adc.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 0a4d66a541ed..11109c84f971 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI ADC MFD driver
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 40/48] iio: adc: ti_am335x_adc: Fix style
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (38 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 39/48] iio: adc: ti_am335x_adc: Replace license text with SPDX tag Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 41/48] iio: adc: ti_am335x_adc: Get rid of useless gotos Miquel Raynal
                   ` (7 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

These warnings are reported by checkpatch.pl essentially.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti_am335x_adc.c | 104 ++++++++++++++++----------------
 1 file changed, 52 insertions(+), 52 deletions(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 11109c84f971..496603ab7841 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -58,7 +58,7 @@ static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
 }
 
 static void tiadc_writel(struct tiadc_device *adc, unsigned int reg,
-					unsigned int val)
+			 unsigned int val)
 {
 	writel(val, adc->mfd_tscadc->tscadc_base + reg);
 }
@@ -73,7 +73,7 @@ static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
 }
 
 static u32 get_adc_chan_step_mask(struct tiadc_device *adc_dev,
-		struct iio_chan_spec const *chan)
+				  struct iio_chan_spec const *chan)
 {
 	int i;
 
@@ -120,8 +120,6 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 	 * Channel would represent which analog input
 	 * needs to be given to ADC to digitalize data.
 	 */
-
-
 	for (i = 0; i < adc_dev->channels; i++) {
 		int chan;
 
@@ -134,9 +132,8 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 		}
 
 		if (adc_dev->step_avg[i])
-			stepconfig =
-			STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
-			STEPCONFIG_FIFO1;
+			stepconfig = STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
+				     STEPCONFIG_FIFO1;
 		else
 			stepconfig = STEPCONFIG_FIFO1;
 
@@ -144,10 +141,9 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 			stepconfig |= STEPCONFIG_MODE_SWCNT;
 
 		tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
-				stepconfig | STEPCONFIG_INP(chan) |
-				STEPCONFIG_INM_ADCREFM |
-				STEPCONFIG_RFP_VREFP |
-				STEPCONFIG_RFM_VREFN);
+			     stepconfig | STEPCONFIG_INP(chan) |
+			     STEPCONFIG_INM_ADCREFM | STEPCONFIG_RFP_VREFP |
+			     STEPCONFIG_RFM_VREFN);
 
 		if (adc_dev->open_delay[i] > STEPCONFIG_MAX_OPENDLY) {
 			dev_warn(dev, "chan %d: wrong open delay, truncated to 0x%lX\n",
@@ -162,8 +158,8 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 		}
 
 		tiadc_writel(adc_dev, REG_STEPDELAY(steps),
-				STEPDELAY_OPEN(adc_dev->open_delay[i]) |
-				STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
+			     STEPDELAY_OPEN(adc_dev->open_delay[i]) |
+			     STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
 
 		adc_dev->channel_step[i] = steps;
 		steps++;
@@ -188,10 +184,12 @@ static irqreturn_t tiadc_irq_h(int irq, void *private)
 		config = tiadc_readl(adc_dev, REG_CTRL);
 		config &= ~(CNTRLREG_SSENB);
 		tiadc_writel(adc_dev, REG_CTRL, config);
-		tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN
-				| IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES);
+		tiadc_writel(adc_dev, REG_IRQSTATUS,
+			     IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW |
+			     IRQENB_FIFO1THRES);
 
-		/* wait for idle state.
+		/*
+		 * Wait for the idle state.
 		 * ADC needs to finish the current conversion
 		 * before disabling the module
 		 */
@@ -219,11 +217,11 @@ static irqreturn_t tiadc_worker_h(int irq, void *private)
 
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 	for (k = 0; k < fifo1count; k = k + i) {
-		for (i = 0; i < (indio_dev->scan_bytes)/2; i++) {
+		for (i = 0; i < indio_dev->scan_bytes / 2; i++) {
 			read = tiadc_readl(adc_dev, REG_FIFO1);
 			data[i] = read & FIFOREAD_DATA_MASK;
 		}
-		iio_push_to_buffers(indio_dev, (u8 *) data);
+		iio_push_to_buffers(indio_dev, (u8 *)data);
 	}
 
 	tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES);
@@ -256,6 +254,7 @@ static int tiadc_start_dma(struct iio_dev *indio_dev)
 	struct dma_async_tx_descriptor *desc;
 
 	dma->current_period = 0; /* We start to fill period 0 */
+
 	/*
 	 * Make the fifo thresh as the multiple of total number of
 	 * channels enabled, so make sure that cyclic DMA period
@@ -265,9 +264,10 @@ static int tiadc_start_dma(struct iio_dev *indio_dev)
 	 */
 	dma->fifo_thresh = rounddown(FIFO1_THRESHOLD + 1,
 				     adc_dev->total_ch_enabled) - 1;
+
 	/* Make sure that period length is multiple of fifo thresh level */
 	dma->period_size = rounddown(DMA_BUFFER_SIZE / 2,
-				    (dma->fifo_thresh + 1) * sizeof(u16));
+				     (dma->fifo_thresh + 1) * sizeof(u16));
 
 	dma->conf.src_maxburst = dma->fifo_thresh + 1;
 	dmaengine_slave_config(dma->chan, &dma->conf);
@@ -303,9 +303,9 @@ static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
 	if (ret)
 		return ret;
 
-	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
-				IRQENB_FIFO1OVRRUN |
-				IRQENB_FIFO1UNDRFLW));
+	tiadc_writel(adc_dev, REG_IRQCLR,
+		     IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
+		     IRQENB_FIFO1UNDRFLW);
 
 	/* Flush FIFO. Needed in corner cases in simultaneous tsc/adc use */
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
@@ -335,8 +335,9 @@ static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
 
 	am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb);
 
-	tiadc_writel(adc_dev,  REG_IRQSTATUS, IRQENB_FIFO1THRES
-				| IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW);
+	tiadc_writel(adc_dev, REG_IRQSTATUS,
+		     IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
+		     IRQENB_FIFO1UNDRFLW);
 
 	irq_enable = IRQENB_FIFO1OVRRUN;
 	if (!dma->chan)
@@ -352,8 +353,9 @@ static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
 	struct tiadc_dma *dma = &adc_dev->dma;
 	int fifo1count, i;
 
-	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
-				IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
+	tiadc_writel(adc_dev, REG_IRQCLR,
+		     IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
+		     IRQENB_FIFO1UNDRFLW);
 	am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
 	adc_dev->buffer_en_ch_steps = 0;
 	adc_dev->total_ch_enabled = 0;
@@ -385,12 +387,11 @@ static const struct iio_buffer_setup_ops tiadc_buffer_setup_ops = {
 };
 
 static int tiadc_iio_buffered_hardware_setup(struct device *dev,
-	struct iio_dev *indio_dev,
-	irqreturn_t (*pollfunc_bh)(int irq, void *p),
-	irqreturn_t (*pollfunc_th)(int irq, void *p),
-	int irq,
-	unsigned long flags,
-	const struct iio_buffer_setup_ops *setup_ops)
+					     struct iio_dev *indio_dev,
+					     irqreturn_t (*pollfunc_bh)(int irq, void *p),
+					     irqreturn_t (*pollfunc_th)(int irq, void *p),
+					     int irq, unsigned long flags,
+					     const struct iio_buffer_setup_ops *setup_ops)
 {
 	int ret;
 
@@ -401,7 +402,7 @@ static int tiadc_iio_buffered_hardware_setup(struct device *dev,
 		return ret;
 
 	return devm_request_threaded_irq(dev, irq, pollfunc_th, pollfunc_bh,
-				flags, indio_dev->name, indio_dev);
+					 flags, indio_dev->name, indio_dev);
 }
 
 static const char * const chan_name_ain[] = {
@@ -426,12 +427,11 @@ static int tiadc_channel_init(struct device *dev, struct iio_dev *indio_dev,
 	indio_dev->num_channels = channels;
 	chan_array = devm_kcalloc(dev, channels, sizeof(*chan_array),
 				  GFP_KERNEL);
-	if (chan_array == NULL)
+	if (!chan_array)
 		return -ENOMEM;
 
 	chan = chan_array;
 	for (i = 0; i < channels; i++, chan++) {
-
 		chan->type = IIO_VOLTAGE;
 		chan->indexed = 1;
 		chan->channel = adc_dev->channel_line[i];
@@ -449,8 +449,8 @@ static int tiadc_channel_init(struct device *dev, struct iio_dev *indio_dev,
 }
 
 static int tiadc_read_raw(struct iio_dev *indio_dev,
-		struct iio_chan_spec const *chan,
-		int *val, int *val2, long mask)
+			  struct iio_chan_spec const *chan, int *val, int *val2,
+			  long mask)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
 	int i, map_val;
@@ -479,9 +479,8 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 
 	am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
 
-	timeout = jiffies + msecs_to_jiffies
-				(IDLE_TIMEOUT * adc_dev->channels);
 	/* Wait for Fifo threshold interrupt */
+	timeout = jiffies + msecs_to_jiffies(IDLE_TIMEOUT * adc_dev->channels);
 	while (1) {
 		fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 		if (fifo1count)
@@ -493,6 +492,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 			goto err_unlock;
 		}
 	}
+
 	map_val = adc_dev->channel_step[chan->scan_index];
 
 	/*
@@ -510,13 +510,14 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 		if (stepid == map_val) {
 			read = read & FIFOREAD_DATA_MASK;
 			found = true;
-			*val = (u16) read;
+			*val = (u16)read;
 		}
 	}
+
 	am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
 
 	if (!found)
-		ret =  -EBUSY;
+		ret = -EBUSY;
 
 err_unlock:
 	mutex_unlock(&adc_dev->fifo1_lock);
@@ -557,6 +558,7 @@ static int tiadc_request_dma(struct platform_device *pdev,
 		goto err;
 
 	return 0;
+
 err:
 	dma_release_channel(dma->chan);
 	return -ENOMEM;
@@ -606,7 +608,7 @@ static int tiadc_probe(struct platform_device *pdev)
 	}
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
-	if (indio_dev == NULL) {
+	if (!indio_dev) {
 		dev_err(&pdev->dev, "failed to allocate iio device\n");
 		return -ENOMEM;
 	}
@@ -628,12 +630,11 @@ static int tiadc_probe(struct platform_device *pdev)
 		return err;
 
 	err = tiadc_iio_buffered_hardware_setup(&pdev->dev, indio_dev,
-		&tiadc_worker_h,
-		&tiadc_irq_h,
-		adc_dev->mfd_tscadc->irq,
-		IRQF_SHARED,
-		&tiadc_buffer_setup_ops);
-
+						&tiadc_worker_h,
+						&tiadc_irq_h,
+						adc_dev->mfd_tscadc->irq,
+						IRQF_SHARED,
+						&tiadc_buffer_setup_ops);
 	if (err)
 		goto err_free_channels;
 
@@ -684,8 +685,7 @@ static int __maybe_unused tiadc_suspend(struct device *dev)
 
 	idle = tiadc_readl(adc_dev, REG_CTRL);
 	idle &= ~(CNTRLREG_SSENB);
-	tiadc_writel(adc_dev, REG_CTRL, (idle |
-			CNTRLREG_POWERDOWN));
+	tiadc_writel(adc_dev, REG_CTRL, idle | CNTRLREG_POWERDOWN);
 
 	return 0;
 }
@@ -698,12 +698,12 @@ static int __maybe_unused tiadc_resume(struct device *dev)
 
 	/* Make sure ADC is powered up */
 	restore = tiadc_readl(adc_dev, REG_CTRL);
-	restore &= ~(CNTRLREG_POWERDOWN);
+	restore &= ~CNTRLREG_POWERDOWN;
 	tiadc_writel(adc_dev, REG_CTRL, restore);
 
 	tiadc_step_config(indio_dev);
 	am335x_tsc_se_set_cache(adc_dev->mfd_tscadc,
-			adc_dev->buffer_en_ch_steps);
+				adc_dev->buffer_en_ch_steps);
 	return 0;
 }
 
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 41/48] iio: adc: ti_am335x_adc: Get rid of useless gotos
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (39 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 40/48] iio: adc: ti_am335x_adc: Fix style Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 42/48] iio: adc: ti_am335x_adc: Gather the checks on the delays Miquel Raynal
                   ` (6 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Gotos jumping to a return statement are not really useful, drop them.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti_am335x_adc.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 496603ab7841..aa151d702a14 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -636,11 +636,11 @@ static int tiadc_probe(struct platform_device *pdev)
 						IRQF_SHARED,
 						&tiadc_buffer_setup_ops);
 	if (err)
-		goto err_free_channels;
+		return err;
 
 	err = iio_device_register(indio_dev);
 	if (err)
-		goto err_buffer_unregister;
+		return err;
 
 	platform_set_drvdata(pdev, indio_dev);
 
@@ -652,8 +652,7 @@ static int tiadc_probe(struct platform_device *pdev)
 
 err_dma:
 	iio_device_unregister(indio_dev);
-err_buffer_unregister:
-err_free_channels:
+
 	return err;
 }
 
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 42/48] iio: adc: ti_am335x_adc: Gather the checks on the delays
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (40 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 41/48] iio: adc: ti_am335x_adc: Get rid of useless gotos Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 43/48] iio: adc: ti_am335x_adc: Add a unit to the timeout delay Miquel Raynal
                   ` (5 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Move the checks over the delays provided in the device tree to the
location where these values are read to clarify where they come from.

There are no functional changes besides the device structure used to
display the warnings: let's use the ADC instead of the MFD device.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti_am335x_adc.c | 50 ++++++++++++++++++++-------------
 1 file changed, 30 insertions(+), 20 deletions(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index aa151d702a14..6f47a1ace3d4 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -107,7 +107,6 @@ static int tiadc_wait_idle(struct tiadc_device *adc_dev)
 static void tiadc_step_config(struct iio_dev *indio_dev)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
-	struct device *dev = adc_dev->mfd_tscadc->dev;
 	unsigned int stepconfig;
 	int i, steps = 0;
 
@@ -125,12 +124,6 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 
 		chan = adc_dev->channel_line[i];
 
-		if (adc_dev->step_avg[i] > STEPCONFIG_AVG_16) {
-			dev_warn(dev, "chan %d: wrong step avg, truncated to %ld\n",
-				 chan, STEPCONFIG_AVG_16);
-			adc_dev->step_avg[i] = STEPCONFIG_AVG_16;
-		}
-
 		if (adc_dev->step_avg[i])
 			stepconfig = STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
 				     STEPCONFIG_FIFO1;
@@ -145,18 +138,6 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 			     STEPCONFIG_INM_ADCREFM | STEPCONFIG_RFP_VREFP |
 			     STEPCONFIG_RFM_VREFN);
 
-		if (adc_dev->open_delay[i] > STEPCONFIG_MAX_OPENDLY) {
-			dev_warn(dev, "chan %d: wrong open delay, truncated to 0x%lX\n",
-				 chan, STEPCONFIG_MAX_OPENDLY);
-			adc_dev->open_delay[i] = STEPCONFIG_MAX_OPENDLY;
-		}
-
-		if (adc_dev->sample_delay[i] > STEPCONFIG_MAX_SAMPLE) {
-			dev_warn(dev, "chan %d: wrong sample delay, truncated to 0x%lX\n",
-				 chan, STEPCONFIG_MAX_SAMPLE);
-			adc_dev->sample_delay[i] = STEPCONFIG_MAX_SAMPLE;
-		}
-
 		tiadc_writel(adc_dev, REG_STEPDELAY(steps),
 			     STEPDELAY_OPEN(adc_dev->open_delay[i]) |
 			     STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
@@ -572,6 +553,7 @@ static int tiadc_parse_dt(struct platform_device *pdev,
 	const __be32 *cur;
 	int channels = 0;
 	u32 val;
+	int i;
 
 	of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
 		adc_dev->channel_line[channels] = val;
@@ -584,6 +566,8 @@ static int tiadc_parse_dt(struct platform_device *pdev,
 		channels++;
 	}
 
+	adc_dev->channels = channels;
+
 	of_property_read_u32_array(node, "ti,chan-step-avg",
 				   adc_dev->step_avg, channels);
 	of_property_read_u32_array(node, "ti,chan-step-opendelay",
@@ -591,7 +575,33 @@ static int tiadc_parse_dt(struct platform_device *pdev,
 	of_property_read_u32_array(node, "ti,chan-step-sampledelay",
 				   adc_dev->sample_delay, channels);
 
-	adc_dev->channels = channels;
+	for (i = 0; i < adc_dev->channels; i++) {
+		int chan;
+
+		chan = adc_dev->channel_line[i];
+
+		if (adc_dev->step_avg[i] > STEPCONFIG_AVG_16) {
+			dev_warn(&pdev->dev,
+				 "chan %d: wrong step avg, truncated to %ld\n",
+				 chan, STEPCONFIG_AVG_16);
+			adc_dev->step_avg[i] = STEPCONFIG_AVG_16;
+		}
+
+		if (adc_dev->open_delay[i] > STEPCONFIG_MAX_OPENDLY) {
+			dev_warn(&pdev->dev,
+				 "chan %d: wrong open delay, truncated to 0x%lX\n",
+				 chan, STEPCONFIG_MAX_OPENDLY);
+			adc_dev->open_delay[i] = STEPCONFIG_MAX_OPENDLY;
+		}
+
+		if (adc_dev->sample_delay[i] > STEPCONFIG_MAX_SAMPLE) {
+			dev_warn(&pdev->dev,
+				 "chan %d: wrong sample delay, truncated to 0x%lX\n",
+				 chan, STEPCONFIG_MAX_SAMPLE);
+			adc_dev->sample_delay[i] = STEPCONFIG_MAX_SAMPLE;
+		}
+	}
+
 	return 0;
 }
 
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 43/48] iio: adc: ti_am335x_adc: Add a unit to the timeout delay
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (41 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 42/48] iio: adc: ti_am335x_adc: Gather the checks on the delays Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 44/48] iio: adc: ti_am335x_adc: Add the scale information Miquel Raynal
                   ` (4 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

The lack of unit in the macro name kind of tricked me when I was
troubleshooting an issue. Physical constants should always get a unit.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti_am335x_adc.c      | 4 ++--
 include/linux/mfd/ti_am335x_tscadc.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 6f47a1ace3d4..e7dba10b29b4 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -101,7 +101,7 @@ static int tiadc_wait_idle(struct tiadc_device *adc_dev)
 
 	return readl_poll_timeout(adc_dev->mfd_tscadc->tscadc_base + REG_ADCFSM,
 				  val, !(val & SEQ_STATUS), 10,
-				  IDLE_TIMEOUT * 1000 * adc_dev->channels);
+				  IDLE_TIMEOUT_MS * 1000 * adc_dev->channels);
 }
 
 static void tiadc_step_config(struct iio_dev *indio_dev)
@@ -461,7 +461,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 	am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
 
 	/* Wait for Fifo threshold interrupt */
-	timeout = jiffies + msecs_to_jiffies(IDLE_TIMEOUT * adc_dev->channels);
+	timeout = jiffies + msecs_to_jiffies(IDLE_TIMEOUT_MS * adc_dev->channels);
 	while (1) {
 		fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 		if (fifo1count)
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 5225e3fc194d..ba13e043d910 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -141,7 +141,7 @@
  *
  * max processing time: 266431 * 308ns = 83ms(approx)
  */
-#define IDLE_TIMEOUT		83 /* milliseconds */
+#define IDLE_TIMEOUT_MS		83 /* milliseconds */
 
 #define TSCADC_CELLS		2
 
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 44/48] iio: adc: ti_am335x_adc: Add the scale information
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (42 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 43/48] iio: adc: ti_am335x_adc: Add a unit to the timeout delay Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 45/48] iio: adc: ti_am335x_adc: Add the am437x compatible Miquel Raynal
                   ` (3 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

Without the scale, the values returned to the user are just a picture of
the input voltage against the full scale range of the ADC. We need to
provide the actual conversion factor to get milli-Volts values.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti_am335x_adc.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index e7dba10b29b4..867690b6c2dd 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -417,6 +417,7 @@ static int tiadc_channel_init(struct device *dev, struct iio_dev *indio_dev,
 		chan->indexed = 1;
 		chan->channel = adc_dev->channel_line[i];
 		chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
+		chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
 		chan->datasheet_name = chan_name_ain[chan->channel];
 		chan->scan_index = i;
 		chan->scan_type.sign = 'u';
@@ -441,6 +442,23 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 	unsigned long timeout;
 	int ret;
 
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_VOLTAGE:
+			*val = 1800;
+			*val2 = chan->scan_type.realbits;
+			return IIO_VAL_FRACTIONAL_LOG2;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
 	if (iio_buffer_enabled(indio_dev))
 		return -EBUSY;
 
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 45/48] iio: adc: ti_am335x_adc: Add the am437x compatible
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (43 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 44/48] iio: adc: ti_am335x_adc: Add the scale information Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 46/48] ARM: dts: am437x-cm-t43: Use a correctly spelled DT property Miquel Raynal
                   ` (2 subsequent siblings)
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal, Jonathan Cameron

This driver supports both the legacy controller (am33xx) and the
extended one (am437x), so let's add a new compatible.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti_am335x_adc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 867690b6c2dd..dbdc1ef48566 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -738,6 +738,7 @@ static SIMPLE_DEV_PM_OPS(tiadc_pm_ops, tiadc_suspend, tiadc_resume);
 
 static const struct of_device_id ti_adc_dt_ids[] = {
 	{ .compatible = "ti,am3359-adc", },
+	{ .compatible = "ti,am4372-adc", },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ti_adc_dt_ids);
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 46/48] ARM: dts: am437x-cm-t43: Use a correctly spelled DT property
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (44 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 45/48] iio: adc: ti_am335x_adc: Add the am437x compatible Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 47/48] ARM: dts: am43xx: Describe the magnetic reader/ADC1 hardware module Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 48/48] ARM: dts: am437x-gp-evm: enable ADC1 Miquel Raynal
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal

Back in 2014 a property got misspelled "ti,coordiante-readouts" instead
of "ti,coordinate-readouts".

The year after it got fixed but both are still supported, although this
is not a reason to continue using this old deprecated property.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/am437x-cm-t43.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
index 5ce8e684e7d3..3e3354780db8 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -399,7 +399,7 @@ &tscadc {
 	tsc {
 		ti,wires = <4>;
 		ti,x-plate-resistance = <200>;
-		ti,coordiante-readouts = <5>;
+		ti,coordinate-readouts = <5>;
 		ti,wire-config = <0x00 0x11 0x22 0x33>;
 	};
 
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 47/48] ARM: dts: am43xx: Describe the magnetic reader/ADC1 hardware module
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (45 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 46/48] ARM: dts: am437x-cm-t43: Use a correctly spelled DT property Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  2021-09-28 13:31 ` [PATCH v4 48/48] ARM: dts: am437x-gp-evm: enable ADC1 Miquel Raynal
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal

This hardware module is close to the am33xx ADC module but instead of
featuring a touchscreen it has a magnetic reader capability.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/am437x-l4.dtsi     | 31 ++++++++++++++++++++++++++--
 arch/arm/boot/dts/am43xx-clocks.dtsi |  7 +++++++
 2 files changed, 36 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index ba58e6b0da1d..8f2268c02778 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -2378,11 +2378,38 @@ hdq: hdq@0 {
 		};
 
 		target-module@4c000 {			/* 0x4834c000, ap 114 72.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4c000 0x4>,
+			      <0x4c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3s_clkctrl AM4_L3S_ADC1_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x4c000 0x2000>;
+
+			magadc: magadc@0 {
+				compatible = "ti,am4372-magadc";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&adc_mag_fck>;
+				clock-names = "fck";
+				dmas = <&edma 54 0>, <&edma 55 0>;
+				dma-names = "fifo0", "fifo1";
+				status = "disabled";
+
+				mag {
+					compatible = "ti,am4372-mag";
+				};
+
+				adc {
+					#io-channel-cells = <1>;
+					compatible ="ti,am4372-adc";
+				};
+			};
 		};
 
 		target-module@80000 {			/* 0x48380000, ap 123 42.0 */
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index 314fc5975acb..66e892fa3398 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -444,6 +444,13 @@ wdt1_fck: wdt1_fck@422c {
 		reg = <0x422c>;
 	};
 
+	adc_mag_fck: adc_mag_fck@424c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_per_m2_ck>;
+		reg = <0x424c>;
+	};
+
 	l3_gclk: l3_gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* [PATCH v4 48/48] ARM: dts: am437x-gp-evm: enable ADC1
  2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
                   ` (46 preceding siblings ...)
  2021-09-28 13:31 ` [PATCH v4 47/48] ARM: dts: am43xx: Describe the magnetic reader/ADC1 hardware module Miquel Raynal
@ 2021-09-28 13:31 ` Miquel Raynal
  47 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-09-28 13:31 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov, bcousson,
	Tony Lindgren, linux-iio, devicetree, linux-omap,
	Thomas Petazzoni, Vignesh Raghavendra, Lokesh Vutla, Tero Kristo,
	Ryan Barnett, Grygorii Strashko, Jason Reeder, linux-kernel,
	Miquel Raynal

ADC0 and ADC1 pins are available on external connector J22.

Enable ADC1 which was missing.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 arch/arm/boot/dts/am437x-gp-evm.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index c2e4896076e7..4416ddb559e4 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -775,6 +775,14 @@ adc {
 	};
 };
 
+&magadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
 &ecap0 {
 	status = "okay";
 	pinctrl-names = "default";
-- 
2.27.0


^ permalink raw reply	[flat|nested] 54+ messages in thread

* Re: [PATCH v4 36/48] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support
  2021-09-28 13:31 ` [PATCH v4 36/48] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support Miquel Raynal
@ 2021-09-28 22:32   ` kernel test robot
  2021-10-01  7:26     ` Miquel Raynal
  0 siblings, 1 reply; 54+ messages in thread
From: kernel test robot @ 2021-09-28 22:32 UTC (permalink / raw)
  To: Miquel Raynal, Jonathan Cameron, Lars-Peter Clausen, Lee Jones
  Cc: kbuild-all, Peter Meerwald-Stadler, Rob Herring, Dmitry Torokhov,
	bcousson, Tony Lindgren, linux-iio, devicetree

[-- Attachment #1: Type: text/plain, Size: 8705 bytes --]

Hi Miquel,

I love your patch! Perhaps something to improve:

[auto build test WARNING on lee-mfd/for-mfd-next]
[also build test WARNING on jic23-iio/togreg robh/for-next v5.15-rc3 next-20210922]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Miquel-Raynal/TI-AM437X-ADC1/20210928-213524
base:   https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next
config: microblaze-randconfig-r033-20210928 (attached as .config)
compiler: microblaze-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/43a01cf6413f2be038b0d466c7c3f6f16b40e2c3
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Miquel-Raynal/TI-AM437X-ADC1/20210928-213524
        git checkout 43a01cf6413f2be038b0d466c7c3f6f16b40e2c3
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross ARCH=microblaze 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/mfd/ti_am335x_tscadc.c: In function 'ti_tscadc_probe':
>> drivers/mfd/ti_am335x_tscadc.c:124:31: warning: variable 'use_mag' set but not used [-Wunused-but-set-variable]
     124 |         bool use_tsc = false, use_mag = false;
         |                               ^~~~~~~
   In file included from drivers/mfd/ti_am335x_tscadc.c:20:
   drivers/mfd/ti_am335x_tscadc.c: At top level:
   include/linux/mfd/ti_am335x_tscadc.h:126:38: error: 'HZ_PER_MHZ' undeclared here (not in a function)
     126 | #define TSC_ADC_CLK             (3 * HZ_PER_MHZ)
         |                                      ^~~~~~~~~~
   drivers/mfd/ti_am335x_tscadc.c:354:28: note: in expansion of macro 'TSC_ADC_CLK'
     354 |         .target_clk_rate = TSC_ADC_CLK,
         |                            ^~~~~~~~~~~


vim +/use_mag +124 drivers/mfd/ti_am335x_tscadc.c

   114	
   115	static	int ti_tscadc_probe(struct platform_device *pdev)
   116	{
   117		struct ti_tscadc_dev *tscadc;
   118		struct resource *res;
   119		struct clk *clk;
   120		struct device_node *node;
   121		struct mfd_cell *cell;
   122		struct property *prop;
   123		const __be32 *cur;
 > 124		bool use_tsc = false, use_mag = false;
   125		u32 val;
   126		int err;
   127		int tscmag_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
   128		int readouts = 0, mag_tracks = 0;
   129	
   130		/* Allocate memory for device */
   131		tscadc = devm_kzalloc(&pdev->dev, sizeof(*tscadc), GFP_KERNEL);
   132		if (!tscadc)
   133			return -ENOMEM;
   134	
   135		tscadc->dev = &pdev->dev;
   136	
   137		if (!pdev->dev.of_node) {
   138			dev_err(&pdev->dev, "Could not find valid DT data.\n");
   139			return -EINVAL;
   140		}
   141	
   142		tscadc->data = of_device_get_match_data(&pdev->dev);
   143	
   144		if (ti_adc_with_touchscreen(tscadc)) {
   145			node = of_get_child_by_name(pdev->dev.of_node, "tsc");
   146			of_property_read_u32(node, "ti,wires", &tscmag_wires);
   147			of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
   148			of_node_put(node);
   149			if (tscmag_wires)
   150				use_tsc = true;
   151		} else {
   152			/*
   153			 * When adding support for the magnetic stripe reader, here is
   154			 * the place to look for the number of tracks used from device
   155			 * tree. Let's default to 0 for now.
   156			 */
   157			mag_tracks = 0;
   158			tscmag_wires = mag_tracks * 2;
   159			if (tscmag_wires)
   160				use_mag = true;
   161		}
   162	
   163		node = of_get_child_by_name(pdev->dev.of_node, "adc");
   164		of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
   165			adc_channels++;
   166			if (val > 7) {
   167				dev_err(&pdev->dev, " PIN numbers are 0..7 (not %d)\n",
   168					val);
   169				of_node_put(node);
   170				return -EINVAL;
   171			}
   172		}
   173	
   174		of_node_put(node);
   175	
   176		total_channels = tscmag_wires + adc_channels;
   177		if (total_channels > 8) {
   178			dev_err(&pdev->dev, "Number of i/p channels more than 8\n");
   179			return -EINVAL;
   180		}
   181	
   182		if (total_channels == 0) {
   183			dev_err(&pdev->dev, "Need atleast one channel.\n");
   184			return -EINVAL;
   185		}
   186	
   187		if (use_tsc && (readouts * 2 + 2 + adc_channels > 16)) {
   188			dev_err(&pdev->dev, "Too many step configurations requested\n");
   189			return -EINVAL;
   190		}
   191	
   192		err = platform_get_irq(pdev, 0);
   193		if (err < 0)
   194			return err;
   195		else
   196			tscadc->irq = err;
   197	
   198		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
   199		tscadc->tscadc_base = devm_ioremap_resource(&pdev->dev, res);
   200		if (IS_ERR(tscadc->tscadc_base))
   201			return PTR_ERR(tscadc->tscadc_base);
   202	
   203		tscadc->tscadc_phys_base = res->start;
   204		tscadc->regmap = devm_regmap_init_mmio(&pdev->dev,
   205						       tscadc->tscadc_base,
   206						       &tscadc_regmap_config);
   207		if (IS_ERR(tscadc->regmap)) {
   208			dev_err(&pdev->dev, "regmap init failed\n");
   209			return PTR_ERR(tscadc->regmap);
   210		}
   211	
   212		spin_lock_init(&tscadc->reg_lock);
   213		init_waitqueue_head(&tscadc->reg_se_wait);
   214	
   215		pm_runtime_enable(&pdev->dev);
   216		pm_runtime_get_sync(&pdev->dev);
   217	
   218		/*
   219		 * The TSC_ADC_Subsystem has 2 clock domains: OCP_CLK and ADC_CLK.
   220		 * ADCs produce a 12-bit sample every 15 ADC_CLK cycles.
   221		 * am33xx ADCs expect to capture 200ksps.
   222		 * am47xx ADCs expect to capture 867ksps.
   223		 * We need ADC clocks respectively running at 3MHz and 13MHz.
   224		 * These frequencies are valid since TSC_ADC_SS controller design
   225		 * assumes the OCP clock is at least 6x faster than the ADC clock.
   226		 */
   227		clk = devm_clk_get(&pdev->dev, NULL);
   228		if (IS_ERR(clk)) {
   229			dev_err(&pdev->dev, "failed to get fck\n");
   230			err = PTR_ERR(clk);
   231			goto err_disable_clk;
   232		}
   233	
   234		tscadc->clk_div = (clk_get_rate(clk) / tscadc->data->target_clk_rate) - 1;
   235		regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
   236	
   237		/*
   238		 * Set the control register bits. tscadc->ctrl stores the configuration
   239		 * of the CTRL register but not the subsystem enable bit which must be
   240		 * added manually when timely.
   241		 */
   242		tscadc->ctrl = CNTRLREG_STEPID;
   243		if (ti_adc_with_touchscreen(tscadc)) {
   244			tscadc->ctrl |= CNTRLREG_TSC_STEPCONFIGWRT;
   245			if (use_tsc) {
   246				tscadc->ctrl |= CNTRLREG_TSC_ENB;
   247				if (tscmag_wires == 5)
   248					tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
   249				else
   250					tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
   251			}
   252		} else {
   253			tscadc->ctrl |= CNTRLREG_MAG_PREAMP_PWRDOWN |
   254					CNTRLREG_MAG_PREAMP_BYPASS;
   255		}
   256		regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
   257	
   258		tscadc_idle_config(tscadc);
   259	
   260		/* Enable the TSC module enable bit */
   261		regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_SSENB);
   262	
   263		/* TSC or MAG Cell */
   264		if (tscmag_wires > 0) {
   265			cell = &tscadc->cells[cell_idx++];
   266			cell->name = tscadc->data->secondary_feature_name;
   267			cell->of_compatible = tscadc->data->secondary_feature_compatible;
   268			cell->platform_data = &tscadc;
   269			cell->pdata_size = sizeof(tscadc);
   270		}
   271	
   272		/* ADC Cell */
   273		if (adc_channels > 0) {
   274			cell = &tscadc->cells[cell_idx++];
   275			cell->name = tscadc->data->adc_feature_name;
   276			cell->of_compatible = tscadc->data->adc_feature_compatible;
   277			cell->platform_data = &tscadc;
   278			cell->pdata_size = sizeof(tscadc);
   279		}
   280	
   281		err = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO,
   282				      tscadc->cells, cell_idx, NULL, 0, NULL);
   283		if (err < 0)
   284			goto err_disable_clk;
   285	
   286		platform_set_drvdata(pdev, tscadc);
   287		return 0;
   288	
   289	err_disable_clk:
   290		pm_runtime_put_sync(&pdev->dev);
   291		pm_runtime_disable(&pdev->dev);
   292	
   293		return err;
   294	}
   295	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 27076 bytes --]

^ permalink raw reply	[flat|nested] 54+ messages in thread

* Re: [PATCH v4 25/48] mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro
  2021-09-28 13:31 ` [PATCH v4 25/48] mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro Miquel Raynal
@ 2021-09-29 15:29   ` Jonathan Cameron
  2021-10-01  7:11     ` Miquel Raynal
  0 siblings, 1 reply; 54+ messages in thread
From: Jonathan Cameron @ 2021-09-29 15:29 UTC (permalink / raw)
  To: Miquel Raynal
  Cc: Lars-Peter Clausen, Lee Jones, Peter Meerwald-Stadler,
	Rob Herring, Dmitry Torokhov, bcousson, Tony Lindgren, linux-iio,
	devicetree, linux-omap, Thomas Petazzoni, Vignesh Raghavendra,
	Lokesh Vutla, Tero Kristo, Ryan Barnett, Grygorii Strashko,
	Jason Reeder, linux-kernel

On Tue, 28 Sep 2021 15:31:20 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Before adding another frequency with even more zeroes, use the
> HZ_PER_MHZ macro to clarify the number.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
You missed tag I gave on v3.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Thanks,

> ---
>  include/linux/mfd/ti_am335x_tscadc.h | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
> index 893c474c1f8c..a85643677bef 100644
> --- a/include/linux/mfd/ti_am335x_tscadc.h
> +++ b/include/linux/mfd/ti_am335x_tscadc.h
> @@ -9,6 +9,7 @@
>  #define __LINUX_TI_AM335X_TSCADC_MFD_H
>  
>  #include <linux/mfd/core.h>
> +#include <linux/units.h>
>  
>  #define REG_RAWIRQSTATUS	0x024
>  #define REG_IRQSTATUS		0x028
> @@ -133,7 +134,7 @@
>  #define SEQ_STATUS		BIT(5)
>  #define CHARGE_STEP		0x11
>  
> -#define ADC_CLK			3000000
> +#define ADC_CLK			(3 * HZ_PER_MHZ)
>  #define TOTAL_STEPS		16
>  #define TOTAL_CHANNELS		8
>  #define FIFO1_THRESHOLD		19


^ permalink raw reply	[flat|nested] 54+ messages in thread

* Re: [PATCH v4 25/48] mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro
  2021-09-29 15:29   ` Jonathan Cameron
@ 2021-10-01  7:11     ` Miquel Raynal
  0 siblings, 0 replies; 54+ messages in thread
From: Miquel Raynal @ 2021-10-01  7:11 UTC (permalink / raw)
  To: Jonathan Cameron
  Cc: Lars-Peter Clausen, Lee Jones, Peter Meerwald-Stadler,
	Rob Herring, Dmitry Torokhov, bcousson, Tony Lindgren, linux-iio,
	devicetree, linux-omap, Thomas Petazzoni, Vignesh Raghavendra,
	Lokesh Vutla, Tero Kristo, Ryan Barnett, Grygorii Strashko,
	Jason Reeder, linux-kernel

Hi Jonathan,

jic23@kernel.org wrote on Wed, 29 Sep 2021 16:29:05 +0100:

> On Tue, 28 Sep 2021 15:31:20 +0200
> Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> 
> > Before adding another frequency with even more zeroes, use the
> > HZ_PER_MHZ macro to clarify the number.
> > 
> > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>  
> You missed tag I gave on v3.
> 
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Oh right, sorry about that.

Cheers,
Miquèl

^ permalink raw reply	[flat|nested] 54+ messages in thread

* Re: [PATCH v4 36/48] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support
  2021-09-28 22:32   ` kernel test robot
@ 2021-10-01  7:26     ` Miquel Raynal
  2021-10-01 18:15       ` Lee Jones
  0 siblings, 1 reply; 54+ messages in thread
From: Miquel Raynal @ 2021-10-01  7:26 UTC (permalink / raw)
  To: Lee Jones
  Cc: Jonathan Cameron, Lars-Peter Clausen, Peter Meerwald-Stadler,
	Rob Herring, Dmitry Torokhov, bcousson, Tony Lindgren, linux-iio

Hello Lee,

- reduced a bit the Cc: list

lkp@intel.com wrote on Wed, 29 Sep 2021 06:32:16 +0800:

> Hi Miquel,
> 
> I love your patch! Perhaps something to improve:
> 
> [auto build test WARNING on lee-mfd/for-mfd-next]
> [also build test WARNING on jic23-iio/togreg robh/for-next v5.15-rc3 next-20210922]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
> 
> url:    https://github.com/0day-ci/linux/commits/Miquel-Raynal/TI-AM437X-ADC1/20210928-213524
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next
> config: microblaze-randconfig-r033-20210928 (attached as .config)
> compiler: microblaze-linux-gcc (GCC) 11.2.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # https://github.com/0day-ci/linux/commit/43a01cf6413f2be038b0d466c7c3f6f16b40e2c3
>         git remote add linux-review https://github.com/0day-ci/linux
>         git fetch --no-tags linux-review Miquel-Raynal/TI-AM437X-ADC1/20210928-213524
>         git checkout 43a01cf6413f2be038b0d466c7c3f6f16b40e2c3
>         # save the attached .config to linux build tree
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross ARCH=microblaze 
> 
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
> 
> All warnings (new ones prefixed by >>):
> 
>    drivers/mfd/ti_am335x_tscadc.c: In function 'ti_tscadc_probe':
> >> drivers/mfd/ti_am335x_tscadc.c:124:31: warning: variable 'use_mag' set but not used [-Wunused-but-set-variable]  
>      124 |         bool use_tsc = false, use_mag = false;
>          |                               ^~~~~~~

It's strange, on my side I didn't get any warnings (using an older GCC,
perhaps not with all the flags enabled either). Anyway, let's remove
the noise, I have a fixup patch which can be applied without disturbing
any of the other patches.

Lee, do you prefer that I send a fixup patch or a v5 for patch "mfd:
ti_am335x_tscadc: Add ADC1/magnetic reader support"? (provided of
course that the other patches are fine to you).

>    In file included from drivers/mfd/ti_am335x_tscadc.c:20:
>    drivers/mfd/ti_am335x_tscadc.c: At top level:
>    include/linux/mfd/ti_am335x_tscadc.h:126:38: error: 'HZ_PER_MHZ' undeclared here (not in a function)
>      126 | #define TSC_ADC_CLK             (3 * HZ_PER_MHZ)
>          |                                      ^~~~~~~~~~
>    drivers/mfd/ti_am335x_tscadc.c:354:28: note: in expansion of macro 'TSC_ADC_CLK'
>      354 |         .target_clk_rate = TSC_ADC_CLK,
>          |                            ^~~~~~~~~~~

For this one I don't believe this is a real warning, units.h is
introduced in a precedent patch, HZ_PER_MHZ is a new macro but it is
upstream now so I think it can safely be discarded.

Thanks,
Miquèl

^ permalink raw reply	[flat|nested] 54+ messages in thread

* Re: [PATCH v4 36/48] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support
  2021-10-01  7:26     ` Miquel Raynal
@ 2021-10-01 18:15       ` Lee Jones
  0 siblings, 0 replies; 54+ messages in thread
From: Lee Jones @ 2021-10-01 18:15 UTC (permalink / raw)
  To: Miquel Raynal
  Cc: Jonathan Cameron, Lars-Peter Clausen, Peter Meerwald-Stadler,
	Rob Herring, Dmitry Torokhov, bcousson, Tony Lindgren, linux-iio

On Fri, 01 Oct 2021, Miquel Raynal wrote:

> Hello Lee,
> 
> - reduced a bit the Cc: list
> 
> lkp@intel.com wrote on Wed, 29 Sep 2021 06:32:16 +0800:
> 
> > Hi Miquel,
> > 
> > I love your patch! Perhaps something to improve:
> > 
> > [auto build test WARNING on lee-mfd/for-mfd-next]
> > [also build test WARNING on jic23-iio/togreg robh/for-next v5.15-rc3 next-20210922]
> > [If your patch is applied to the wrong git tree, kindly drop us a note.
> > And when submitting patch, we suggest to use '--base' as documented in
> > https://git-scm.com/docs/git-format-patch]
> > 
> > url:    https://github.com/0day-ci/linux/commits/Miquel-Raynal/TI-AM437X-ADC1/20210928-213524
> > base:   https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next
> > config: microblaze-randconfig-r033-20210928 (attached as .config)
> > compiler: microblaze-linux-gcc (GCC) 11.2.0
> > reproduce (this is a W=1 build):
> >         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> >         chmod +x ~/bin/make.cross
> >         # https://github.com/0day-ci/linux/commit/43a01cf6413f2be038b0d466c7c3f6f16b40e2c3
> >         git remote add linux-review https://github.com/0day-ci/linux
> >         git fetch --no-tags linux-review Miquel-Raynal/TI-AM437X-ADC1/20210928-213524
> >         git checkout 43a01cf6413f2be038b0d466c7c3f6f16b40e2c3
> >         # save the attached .config to linux build tree
> >         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross ARCH=microblaze 
> > 
> > If you fix the issue, kindly add following tag as appropriate
> > Reported-by: kernel test robot <lkp@intel.com>
> > 
> > All warnings (new ones prefixed by >>):
> > 
> >    drivers/mfd/ti_am335x_tscadc.c: In function 'ti_tscadc_probe':
> > >> drivers/mfd/ti_am335x_tscadc.c:124:31: warning: variable 'use_mag' set but not used [-Wunused-but-set-variable]  
> >      124 |         bool use_tsc = false, use_mag = false;
> >          |                               ^~~~~~~
> 
> It's strange, on my side I didn't get any warnings (using an older GCC,
> perhaps not with all the flags enabled either). Anyway, let's remove
> the noise, I have a fixup patch which can be applied without disturbing
> any of the other patches.
> 
> Lee, do you prefer that I send a fixup patch or a v5 for patch "mfd:
> ti_am335x_tscadc: Add ADC1/magnetic reader support"? (provided of
> course that the other patches are fine to you).

Fix this patch up please.

It would be odd to apply a known broken patch.

> >    In file included from drivers/mfd/ti_am335x_tscadc.c:20:
> >    drivers/mfd/ti_am335x_tscadc.c: At top level:
> >    include/linux/mfd/ti_am335x_tscadc.h:126:38: error: 'HZ_PER_MHZ' undeclared here (not in a function)
> >      126 | #define TSC_ADC_CLK             (3 * HZ_PER_MHZ)
> >          |                                      ^~~~~~~~~~
> >    drivers/mfd/ti_am335x_tscadc.c:354:28: note: in expansion of macro 'TSC_ADC_CLK'
> >      354 |         .target_clk_rate = TSC_ADC_CLK,
> >          |                            ^~~~~~~~~~~
> 
> For this one I don't believe this is a real warning, units.h is
> introduced in a precedent patch, HZ_PER_MHZ is a new macro but it is
> upstream now so I think it can safely be discarded.
> 
> Thanks,
> Miquèl

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 54+ messages in thread

end of thread, other threads:[~2021-10-01 18:15 UTC | newest]

Thread overview: 54+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-28 13:30 [PATCH v4 00/48] TI AM437X ADC1 Miquel Raynal
2021-09-28 13:30 ` [PATCH v4 01/48] clk: ti: am43xx: Add clkctrl data for am43xx ADC1 Miquel Raynal
2021-09-28 13:30 ` [PATCH v4 02/48] dt-bindings: mfd: ti,am3359-tscadc: Add a yaml description for this MFD Miquel Raynal
2021-09-28 13:30 ` [PATCH v4 03/48] dt-bindings: touchscreen: ti,am3359-tsc: New yaml description Miquel Raynal
2021-09-28 13:30 ` [PATCH v4 04/48] dt-bindings: iio: adc: ti,am3359-adc: " Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 05/48] dt-bindings: touchscreen: ti,am3359-tsc: Remove deprecated text file Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 06/48] dt-bindings: mfd: ti,am3359-tscadc: Describe am4372 MFD compatible Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 07/48] dt-bindings: iio: adc: ti,am3359-adc: Describe am4372 ADC compatible Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 08/48] mfd: ti_am335x_tscadc: Ensure a balanced number of node get/put Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 09/48] mfd: ti_am335x_tscadc: Replace license text with SPDX tag Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 10/48] mfd: ti_am335x_tscadc: Fix style Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 11/48] mfd: ti_am335x_tscadc: Drop extra spacing when declaring stack variables Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 12/48] mfd: ti_am335x_tscadc: Get rid of useless gotos Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 13/48] mfd: ti_am335x_tscadc: Reword the comment explaining the dividers Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 14/48] mfd: ti_am335x_tscadc: Don't search the tree for our clock Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 15/48] mfd: ti_am335x_tscadc: Simplify divisor calculation Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 16/48] mfd: ti_am335x_tscadc: Move the driver structure allocation earlier Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 17/48] mfd: ti_am335x_tscadc: Use driver data Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 18/48] mfd: ti_am335x_tscadc: Mimic the probe from resume() Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 19/48] mfd: ti_am335x_tscadc: Drop useless variables from the driver structure Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 20/48] mfd: ti_am335x_tscadc: Always provide an idle configuration Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 21/48] mfd: ti_am335x_tscadc: Reorder the initialization steps Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 22/48] mfd: ti_am335x_tscadc: Gather the ctrl register logic in one place Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 23/48] mfd: ti_am335x_tscadc: Replace the header license text with SPDX tag Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 24/48] mfd: ti_am335x_tscadc: Fix header spacing Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 25/48] mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro Miquel Raynal
2021-09-29 15:29   ` Jonathan Cameron
2021-10-01  7:11     ` Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 26/48] mfd: ti_am335x_tscadc: Drop unused definitions from the header Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 27/48] mfd: ti_am335x_tscadc: Use BIT(), GENMASK() and FIELD_PREP() when relevant Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 28/48] mfd: ti_am335x_tscadc: Clarify the maximum values for DT entries Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 29/48] mfd: ti_am335x_tscadc: Drop useless definitions from the header Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 30/48] mfd: ti_am335x_tscadc: Rename the subsystem enable macro Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 31/48] mfd: ti_am335x_tscadc: Add TSC prefix in certain macros Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 32/48] mfd: ti_am335x_tscadc: Rename a variable Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 33/48] mfd: ti_am335x_tscadc: Fix an error message Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 34/48] mfd: ti_am335x_tscadc: Add a boolean to clarify the presence of a touchscreen Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 35/48] mfd: ti_am335x_tscadc: Introduce a helper to deal with the type of hardware Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 36/48] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support Miquel Raynal
2021-09-28 22:32   ` kernel test robot
2021-10-01  7:26     ` Miquel Raynal
2021-10-01 18:15       ` Lee Jones
2021-09-28 13:31 ` [PATCH v4 37/48] mfd: ti_am335x_tscadc: Support the correctly spelled DT property Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 38/48] iio: adc: ti_am335x_adc: Wait the idle state to avoid stalls Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 39/48] iio: adc: ti_am335x_adc: Replace license text with SPDX tag Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 40/48] iio: adc: ti_am335x_adc: Fix style Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 41/48] iio: adc: ti_am335x_adc: Get rid of useless gotos Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 42/48] iio: adc: ti_am335x_adc: Gather the checks on the delays Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 43/48] iio: adc: ti_am335x_adc: Add a unit to the timeout delay Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 44/48] iio: adc: ti_am335x_adc: Add the scale information Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 45/48] iio: adc: ti_am335x_adc: Add the am437x compatible Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 46/48] ARM: dts: am437x-cm-t43: Use a correctly spelled DT property Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 47/48] ARM: dts: am43xx: Describe the magnetic reader/ADC1 hardware module Miquel Raynal
2021-09-28 13:31 ` [PATCH v4 48/48] ARM: dts: am437x-gp-evm: enable ADC1 Miquel Raynal

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).