Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
From: "Ardelean, Alexandru" <alexandru.Ardelean@analog.com>
To: "andrea.merello@gmail.com" <andrea.merello@gmail.com>,
	"Hennerich, Michael" <Michael.Hennerich@analog.com>,
	"lars@metafoo.de" <lars@metafoo.de>,
	"jic23@kernel.org" <jic23@kernel.org>,
	"pmeerw@pmeerw.net" <pmeerw@pmeerw.net>,
	"knaack.h@gmx.de" <knaack.h@gmx.de>
Cc: "linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>
Subject: Re: [PATCH 2/4] iio: ad7949: fix incorrect SPI xfer len
Date: Fri, 13 Sep 2019 06:46:07 +0000
Message-ID: <3fe869be01ce7c81fd463158c05e0a4a115bdd6a.camel@analog.com> (raw)
In-Reply-To: <20190912144310.7458-3-andrea.merello@gmail.com>

On Thu, 2019-09-12 at 16:43 +0200, Andrea Merello wrote:
> [External]
> 
> This driver supports 14-bits and 16-bits devices. All of them have a 14-bit
> configuration registers. All SPI trasfers, for reading AD conversion
> results and for writing the configuration register, fit in two bytes.
> 
> The driver always uses 4-bytes xfers which seems at least pointless (maybe
> even harmful). This patch trims the SPI xfer len and the buffer size to
> two bytes.
> 

The length reduction proposal is fine.

But, this patch raises a question about endianess.
I'm actually wondering here if we need to see about maybe using a __be16 vs u16.

I'm not that kernel-savy yet about some of these low-level things to be completely sure here.
So, I'd let someone else maybe handle it.

Thanks
Alex 

> Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
> ---
>  drivers/iio/adc/ad7949.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7949.c b/drivers/iio/adc/ad7949.c
> index 518044c31a73..5c2b3446fa4a 100644
> --- a/drivers/iio/adc/ad7949.c
> +++ b/drivers/iio/adc/ad7949.c
> @@ -54,7 +54,7 @@ struct ad7949_adc_chip {
>  	u8 resolution;
>  	u16 cfg;
>  	unsigned int current_channel;
> -	u32 buffer ____cacheline_aligned;
> +	u16 buffer ____cacheline_aligned;
>  };
>  
>  static int ad7949_spi_write_cfg(struct ad7949_adc_chip *ad7949_adc, u16 val,
> @@ -67,7 +67,7 @@ static int ad7949_spi_write_cfg(struct ad7949_adc_chip *ad7949_adc, u16 val,
>  	struct spi_transfer tx[] = {
>  		{
>  			.tx_buf = &ad7949_adc->buffer,
> -			.len = 4,
> +			.len = 2,
>  			.bits_per_word = bits_per_word,
>  		},
>  	};
> @@ -95,7 +95,7 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
>  	struct spi_transfer tx[] = {
>  		{
>  			.rx_buf = &ad7949_adc->buffer,
> -			.len = 4,
> +			.len = 2,
>  			.bits_per_word = bits_per_word,
>  		},
>  	};

  reply index

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-12 14:43 [PATCH 0/4] Fixes for ad7949 Andrea Merello
2019-09-12 14:43 ` [PATCH 1/4] iio: ad7949: kill pointless "readback"-handling code Andrea Merello
2019-09-13  6:37   ` Ardelean, Alexandru
2019-09-15 10:26     ` Jonathan Cameron
2019-09-12 14:43 ` [PATCH 2/4] iio: ad7949: fix incorrect SPI xfer len Andrea Merello
2019-09-13  6:46   ` Ardelean, Alexandru [this message]
2019-09-13  7:56     ` Andrea Merello
2019-09-13  8:28       ` Ardelean, Alexandru
2019-09-15 10:36       ` Jonathan Cameron
2019-09-16  7:51         ` Ardelean, Alexandru
2019-09-21 17:16           ` Jonathan Cameron
2019-09-12 14:43 ` [PATCH 3/4] iio: ad7949: fix SPI xfer delays Andrea Merello
2019-09-13  6:59   ` Ardelean, Alexandru
2019-09-13  8:23     ` Andrea Merello
2019-09-13  8:43       ` Ardelean, Alexandru
2019-09-12 14:43 ` [PATCH 4/4] iio: ad7949: fix channels mixups Andrea Merello
2019-09-13  7:19   ` Ardelean, Alexandru
2019-09-13  8:30     ` Andrea Merello
2019-09-13 11:30       ` Couret Charles-Antoine
2019-09-13 11:40         ` Andrea Merello
2019-09-20  7:45         ` Andrea Merello
2019-09-21 17:12           ` Jonathan Cameron
2019-09-23  8:21             ` Andrea Merello
2019-10-05  9:55               ` Jonathan Cameron
     [not found]                 ` <CAN8YU5PRO5Y5EeEj2SZGm5XfuKSB1rtS7nKdu6wWxXYDOfexqw@mail.gmail.com>
2019-10-22  8:56                   ` Jonathan Cameron
2019-11-04 14:12                     ` Andrea Merello
2019-11-09 11:58                       ` Jonathan Cameron
2019-11-12 15:09                       ` Couret Charles-Antoine
2019-12-02 14:13                         ` [v2] " Andrea Merello
2019-12-02 15:36                           ` Couret Charles-Antoine
2019-12-04 11:06                             ` Jonathan Cameron
2019-12-04 11:13                               ` Couret Charles-Antoine
2019-12-06 16:45                                 ` Jonathan Cameron
2019-09-13  7:24 ` [PATCH 0/4] Fixes for ad7949 Ardelean, Alexandru
2019-09-13 14:00   ` Couret Charles-Antoine
2019-09-15 10:49     ` Jonathan Cameron
2019-09-16  7:39       ` Andrea Merello
2019-09-16  7:48         ` Ardelean, Alexandru
2019-09-16  7:50           ` Ardelean, Alexandru
2019-09-16  7:34     ` Andrea Merello

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3fe869be01ce7c81fd463158c05e0a4a115bdd6a.camel@analog.com \
    --to=alexandru.ardelean@analog.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=andrea.merello@gmail.com \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git