* [PATCH] iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions
@ 2019-10-23 8:27 Alexandru Ardelean
2019-10-27 16:58 ` Jonathan Cameron
0 siblings, 1 reply; 5+ messages in thread
From: Alexandru Ardelean @ 2019-10-23 8:27 UTC (permalink / raw)
To: linux-iio, linux-kernel; +Cc: jic23, Alexandru Ardelean
The iio_triggered_buffer_postenable() hook should be called first to
attach the poll function and the iio_triggered_buffer_predisable() hook
should be called last in the predisable hook.
This change updates the driver to attach/detach the poll func in the
correct order.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/iio/humidity/hdc100x.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
index bfe1cdb16846..963ff043eecf 100644
--- a/drivers/iio/humidity/hdc100x.c
+++ b/drivers/iio/humidity/hdc100x.c
@@ -278,31 +278,34 @@ static int hdc100x_buffer_postenable(struct iio_dev *indio_dev)
struct hdc100x_data *data = iio_priv(indio_dev);
int ret;
+ ret = iio_triggered_buffer_postenable(indio_dev);
+ if (ret)
+ return ret;
+
/* Buffer is enabled. First set ACQ Mode, then attach poll func */
mutex_lock(&data->lock);
ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE,
HDC100X_REG_CONFIG_ACQ_MODE);
mutex_unlock(&data->lock);
if (ret)
- return ret;
+ iio_triggered_buffer_predisable(indio_dev);
- return iio_triggered_buffer_postenable(indio_dev);
+ return ret;
}
static int hdc100x_buffer_predisable(struct iio_dev *indio_dev)
{
struct hdc100x_data *data = iio_priv(indio_dev);
- int ret;
-
- /* First detach poll func, then reset ACQ mode. OK to disable buffer */
- ret = iio_triggered_buffer_predisable(indio_dev);
- if (ret)
- return ret;
+ int ret, ret2;
mutex_lock(&data->lock);
ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE, 0);
mutex_unlock(&data->lock);
+ ret2 = iio_triggered_buffer_predisable(indio_dev);
+ if (ret == 0)
+ ret = ret2;
+
return ret;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions
2019-10-23 8:27 [PATCH] iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions Alexandru Ardelean
@ 2019-10-27 16:58 ` Jonathan Cameron
2019-10-27 18:37 ` Matt Ranostay
0 siblings, 1 reply; 5+ messages in thread
From: Jonathan Cameron @ 2019-10-27 16:58 UTC (permalink / raw)
To: Alexandru Ardelean; +Cc: linux-iio, linux-kernel, Matt Ranostay
On Wed, 23 Oct 2019 11:27:14 +0300
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
> The iio_triggered_buffer_postenable() hook should be called first to
> attach the poll function and the iio_triggered_buffer_predisable() hook
> should be called last in the predisable hook.
>
> This change updates the driver to attach/detach the poll func in the
> correct order.
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Seems fine, but should have cc'd Matt and I'd like to give him time
to take a quick look.
+CC Matt.
Thanks,
Jonathan
> ---
> drivers/iio/humidity/hdc100x.c | 19 +++++++++++--------
> 1 file changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
> index bfe1cdb16846..963ff043eecf 100644
> --- a/drivers/iio/humidity/hdc100x.c
> +++ b/drivers/iio/humidity/hdc100x.c
> @@ -278,31 +278,34 @@ static int hdc100x_buffer_postenable(struct iio_dev *indio_dev)
> struct hdc100x_data *data = iio_priv(indio_dev);
> int ret;
>
> + ret = iio_triggered_buffer_postenable(indio_dev);
> + if (ret)
> + return ret;
> +
> /* Buffer is enabled. First set ACQ Mode, then attach poll func */
> mutex_lock(&data->lock);
> ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE,
> HDC100X_REG_CONFIG_ACQ_MODE);
> mutex_unlock(&data->lock);
> if (ret)
> - return ret;
> + iio_triggered_buffer_predisable(indio_dev);
>
> - return iio_triggered_buffer_postenable(indio_dev);
> + return ret;
> }
>
> static int hdc100x_buffer_predisable(struct iio_dev *indio_dev)
> {
> struct hdc100x_data *data = iio_priv(indio_dev);
> - int ret;
> -
> - /* First detach poll func, then reset ACQ mode. OK to disable buffer */
> - ret = iio_triggered_buffer_predisable(indio_dev);
> - if (ret)
> - return ret;
> + int ret, ret2;
>
> mutex_lock(&data->lock);
> ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE, 0);
> mutex_unlock(&data->lock);
>
> + ret2 = iio_triggered_buffer_predisable(indio_dev);
> + if (ret == 0)
> + ret = ret2;
> +
> return ret;
> }
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions
2019-10-27 16:58 ` Jonathan Cameron
@ 2019-10-27 18:37 ` Matt Ranostay
2019-10-28 7:11 ` Ardelean, Alexandru
0 siblings, 1 reply; 5+ messages in thread
From: Matt Ranostay @ 2019-10-27 18:37 UTC (permalink / raw)
To: Jonathan Cameron
Cc: Alexandru Ardelean, open list:IIO SUBSYSTEM AND DRIVERS, open list
On Sun, Oct 27, 2019 at 6:58 PM Jonathan Cameron <jic23@kernel.org> wrote:
>
> On Wed, 23 Oct 2019 11:27:14 +0300
> Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
>
> > The iio_triggered_buffer_postenable() hook should be called first to
> > attach the poll function and the iio_triggered_buffer_predisable() hook
> > should be called last in the predisable hook.
> >
> > This change updates the driver to attach/detach the poll func in the
> > correct order.
> >
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> Seems fine, but should have cc'd Matt and I'd like to give him time
> to take a quick look.
>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
> +CC Matt.
>
> Thanks,
>
> Jonathan
>
> > ---
> > drivers/iio/humidity/hdc100x.c | 19 +++++++++++--------
> > 1 file changed, 11 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
> > index bfe1cdb16846..963ff043eecf 100644
> > --- a/drivers/iio/humidity/hdc100x.c
> > +++ b/drivers/iio/humidity/hdc100x.c
> > @@ -278,31 +278,34 @@ static int hdc100x_buffer_postenable(struct iio_dev *indio_dev)
> > struct hdc100x_data *data = iio_priv(indio_dev);
> > int ret;
> >
> > + ret = iio_triggered_buffer_postenable(indio_dev);
> > + if (ret)
> > + return ret;
> > +
> > /* Buffer is enabled. First set ACQ Mode, then attach poll func */
> > mutex_lock(&data->lock);
> > ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE,
> > HDC100X_REG_CONFIG_ACQ_MODE);
> > mutex_unlock(&data->lock);
> > if (ret)
> > - return ret;
> > + iio_triggered_buffer_predisable(indio_dev);
> >
> > - return iio_triggered_buffer_postenable(indio_dev);
> > + return ret;
> > }
> >
> > static int hdc100x_buffer_predisable(struct iio_dev *indio_dev)
> > {
> > struct hdc100x_data *data = iio_priv(indio_dev);
> > - int ret;
> > -
> > - /* First detach poll func, then reset ACQ mode. OK to disable buffer */
> > - ret = iio_triggered_buffer_predisable(indio_dev);
> > - if (ret)
> > - return ret;
> > + int ret, ret2;
> >
> > mutex_lock(&data->lock);
> > ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE, 0);
> > mutex_unlock(&data->lock);
> >
> > + ret2 = iio_triggered_buffer_predisable(indio_dev);
> > + if (ret == 0)
> > + ret = ret2;
> > +
> > return ret;
> > }
> >
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions
2019-10-27 18:37 ` Matt Ranostay
@ 2019-10-28 7:11 ` Ardelean, Alexandru
2019-11-02 14:40 ` Jonathan Cameron
0 siblings, 1 reply; 5+ messages in thread
From: Ardelean, Alexandru @ 2019-10-28 7:11 UTC (permalink / raw)
To: jic23, matt.ranostay; +Cc: linux-kernel, linux-iio
On Sun, 2019-10-27 at 20:37 +0200, Matt Ranostay wrote:
> [External]
>
> On Sun, Oct 27, 2019 at 6:58 PM Jonathan Cameron <jic23@kernel.org>
> wrote:
> > On Wed, 23 Oct 2019 11:27:14 +0300
> > Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
> >
> > > The iio_triggered_buffer_postenable() hook should be called first to
> > > attach the poll function and the iio_triggered_buffer_predisable()
> > > hook
> > > should be called last in the predisable hook.
> > >
> > > This change updates the driver to attach/detach the poll func in the
> > > correct order.
> > >
> > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> > Seems fine, but should have cc'd Matt and I'd like to give him time
> > to take a quick look.
> >
>
> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Apologies for not CC-ing Matt.
I guess I wasn't paying [close enough] attention to the output of
get_maintainers.pl
Thanks
Alex
>
> > +CC Matt.
> >
> > Thanks,
> >
> > Jonathan
> >
> > > ---
> > > drivers/iio/humidity/hdc100x.c | 19 +++++++++++--------
> > > 1 file changed, 11 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/iio/humidity/hdc100x.c
> > > b/drivers/iio/humidity/hdc100x.c
> > > index bfe1cdb16846..963ff043eecf 100644
> > > --- a/drivers/iio/humidity/hdc100x.c
> > > +++ b/drivers/iio/humidity/hdc100x.c
> > > @@ -278,31 +278,34 @@ static int hdc100x_buffer_postenable(struct
> > > iio_dev *indio_dev)
> > > struct hdc100x_data *data = iio_priv(indio_dev);
> > > int ret;
> > >
> > > + ret = iio_triggered_buffer_postenable(indio_dev);
> > > + if (ret)
> > > + return ret;
> > > +
> > > /* Buffer is enabled. First set ACQ Mode, then attach poll func
> > > */
> > > mutex_lock(&data->lock);
> > > ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE,
> > > HDC100X_REG_CONFIG_ACQ_MODE);
> > > mutex_unlock(&data->lock);
> > > if (ret)
> > > - return ret;
> > > + iio_triggered_buffer_predisable(indio_dev);
> > >
> > > - return iio_triggered_buffer_postenable(indio_dev);
> > > + return ret;
> > > }
> > >
> > > static int hdc100x_buffer_predisable(struct iio_dev *indio_dev)
> > > {
> > > struct hdc100x_data *data = iio_priv(indio_dev);
> > > - int ret;
> > > -
> > > - /* First detach poll func, then reset ACQ mode. OK to disable
> > > buffer */
> > > - ret = iio_triggered_buffer_predisable(indio_dev);
> > > - if (ret)
> > > - return ret;
> > > + int ret, ret2;
> > >
> > > mutex_lock(&data->lock);
> > > ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE,
> > > 0);
> > > mutex_unlock(&data->lock);
> > >
> > > + ret2 = iio_triggered_buffer_predisable(indio_dev);
> > > + if (ret == 0)
> > > + ret = ret2;
> > > +
> > > return ret;
> > > }
> > >
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions
2019-10-28 7:11 ` Ardelean, Alexandru
@ 2019-11-02 14:40 ` Jonathan Cameron
0 siblings, 0 replies; 5+ messages in thread
From: Jonathan Cameron @ 2019-11-02 14:40 UTC (permalink / raw)
To: Ardelean, Alexandru; +Cc: matt.ranostay, linux-kernel, linux-iio
On Mon, 28 Oct 2019 07:11:51 +0000
"Ardelean, Alexandru" <alexandru.Ardelean@analog.com> wrote:
> On Sun, 2019-10-27 at 20:37 +0200, Matt Ranostay wrote:
> > [External]
> >
> > On Sun, Oct 27, 2019 at 6:58 PM Jonathan Cameron <jic23@kernel.org>
> > wrote:
> > > On Wed, 23 Oct 2019 11:27:14 +0300
> > > Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
> > >
> > > > The iio_triggered_buffer_postenable() hook should be called first to
> > > > attach the poll function and the iio_triggered_buffer_predisable()
> > > > hook
> > > > should be called last in the predisable hook.
> > > >
> > > > This change updates the driver to attach/detach the poll func in the
> > > > correct order.
> > > >
> > > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> > > Seems fine, but should have cc'd Matt and I'd like to give him time
> > > to take a quick look.
> > >
> >
> > Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
>
> Apologies for not CC-ing Matt.
> I guess I wasn't paying [close enough] attention to the output of
> get_maintainers.pl
>
> Thanks
> Alex
>
Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it.
Thanks,
Jonathan
> >
> > > +CC Matt.
> > >
> > > Thanks,
> > >
> > > Jonathan
> > >
> > > > ---
> > > > drivers/iio/humidity/hdc100x.c | 19 +++++++++++--------
> > > > 1 file changed, 11 insertions(+), 8 deletions(-)
> > > >
> > > > diff --git a/drivers/iio/humidity/hdc100x.c
> > > > b/drivers/iio/humidity/hdc100x.c
> > > > index bfe1cdb16846..963ff043eecf 100644
> > > > --- a/drivers/iio/humidity/hdc100x.c
> > > > +++ b/drivers/iio/humidity/hdc100x.c
> > > > @@ -278,31 +278,34 @@ static int hdc100x_buffer_postenable(struct
> > > > iio_dev *indio_dev)
> > > > struct hdc100x_data *data = iio_priv(indio_dev);
> > > > int ret;
> > > >
> > > > + ret = iio_triggered_buffer_postenable(indio_dev);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > /* Buffer is enabled. First set ACQ Mode, then attach poll func
> > > > */
> > > > mutex_lock(&data->lock);
> > > > ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE,
> > > > HDC100X_REG_CONFIG_ACQ_MODE);
> > > > mutex_unlock(&data->lock);
> > > > if (ret)
> > > > - return ret;
> > > > + iio_triggered_buffer_predisable(indio_dev);
> > > >
> > > > - return iio_triggered_buffer_postenable(indio_dev);
> > > > + return ret;
> > > > }
> > > >
> > > > static int hdc100x_buffer_predisable(struct iio_dev *indio_dev)
> > > > {
> > > > struct hdc100x_data *data = iio_priv(indio_dev);
> > > > - int ret;
> > > > -
> > > > - /* First detach poll func, then reset ACQ mode. OK to disable
> > > > buffer */
> > > > - ret = iio_triggered_buffer_predisable(indio_dev);
> > > > - if (ret)
> > > > - return ret;
> > > > + int ret, ret2;
> > > >
> > > > mutex_lock(&data->lock);
> > > > ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE,
> > > > 0);
> > > > mutex_unlock(&data->lock);
> > > >
> > > > + ret2 = iio_triggered_buffer_predisable(indio_dev);
> > > > + if (ret == 0)
> > > > + ret = ret2;
> > > > +
> > > > return ret;
> > > > }
> > > >
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-11-02 14:40 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-23 8:27 [PATCH] iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions Alexandru Ardelean
2019-10-27 16:58 ` Jonathan Cameron
2019-10-27 18:37 ` Matt Ranostay
2019-10-28 7:11 ` Ardelean, Alexandru
2019-11-02 14:40 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).