* [PATCH] dt-bindings: iio: accel: adxl372: switch to YAML bindings
@ 2019-05-18 21:55 Lucas Oshiro
2019-05-19 11:24 ` Jonathan Cameron
2019-05-24 10:21 ` Popa, Stefan Serban
0 siblings, 2 replies; 5+ messages in thread
From: Lucas Oshiro @ 2019-05-18 21:55 UTC (permalink / raw)
To: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
Peter Meerwald-Stadler, Rob Herring, Mark Rutland, Stefan Popa
Cc: linux-iio, devicetree, linux-kernel, kernel-usp, Rodrigo Ribeiro
Convert the old device tree documentation to yaml format.
Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
Co-developed-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
---
Hello,
We've added Stefan Popa as maintainer of the yaml documentation of this driver
because we found through git that he was the author of the older documentation.
.../bindings/iio/accel/adi,adxl372.yaml | 66 +++++++++++++++++++
.../devicetree/bindings/iio/accel/adxl372.txt | 33 ----------
2 files changed, 66 insertions(+), 33 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/accel/adxl372.txt
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
new file mode 100644
index 000000000000..a6e2893d2ab1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl372.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
+
+maintainers:
+ - Stefan Popa <stefan.popa@analog.com>
+
+description: |
+ Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports
+ both I2C & SPI interfaces
+ https://www.analog.com/en/products/adxl372.html
+
+properties:
+ compatible:
+ enum:
+ - adi,adxl372
+
+ reg:
+ description: the I2C address or SPI chip select number for the device
+ maxItems: 1
+
+ interrupts:
+ description:
+ interrupt mapping for IRQ as documented in
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Example for a I2C device node */
+ accelerometer@53 {
+ compatible = "adi,adxl372";
+ reg = <0x53>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ accelerometer@0 {
+ compatible = "adi,adxl372";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
deleted file mode 100644
index a289964756a7..000000000000
--- a/Documentation/devicetree/bindings/iio/accel/adxl372.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
-
-http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf
-
-Required properties:
- - compatible : should be "adi,adxl372"
- - reg: the I2C address or SPI chip select number for the device
-
-Required properties for SPI bus usage:
- - spi-max-frequency: Max SPI frequency to use
-
-Optional properties:
- - interrupts: interrupt mapping for IRQ as documented in
- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Example for a I2C device node:
-
- accelerometer@53 {
- compatible = "adi,adxl372";
- reg = <0x53>;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- };
-
-Example for a SPI device node:
-
- accelerometer@0 {
- compatible = "adi,adxl372";
- reg = <0>;
- spi-max-frequency = <1000000>;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- };
--
2.21.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] dt-bindings: iio: accel: adxl372: switch to YAML bindings
2019-05-18 21:55 [PATCH] dt-bindings: iio: accel: adxl372: switch to YAML bindings Lucas Oshiro
@ 2019-05-19 11:24 ` Jonathan Cameron
2019-05-20 10:46 ` Alexandru Ardelean
2019-05-24 10:21 ` Popa, Stefan Serban
1 sibling, 1 reply; 5+ messages in thread
From: Jonathan Cameron @ 2019-05-19 11:24 UTC (permalink / raw)
To: Lucas Oshiro
Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler,
Rob Herring, Mark Rutland, Stefan Popa, linux-iio, devicetree,
linux-kernel, kernel-usp, Rodrigo Ribeiro
On Sat, 18 May 2019 18:55:42 -0300
Lucas Oshiro <lucasseikioshiro@gmail.com> wrote:
> Convert the old device tree documentation to yaml format.
>
> Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
> Signed-off-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
> Co-developed-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
> ---
>
> Hello,
> We've added Stefan Popa as maintainer of the yaml documentation of this driver
> because we found through git that he was the author of the older documentation.
Definitely going to need an Ack from Stefan for that ;)
I've not really gotten yaml formats into my head yet, but from a quick
look I think this is fine. I will however be looking for review from others
on these.
Thanks,
Jonathan
>
> .../bindings/iio/accel/adi,adxl372.yaml | 66 +++++++++++++++++++
> .../devicetree/bindings/iio/accel/adxl372.txt | 33 ----------
> 2 files changed, 66 insertions(+), 33 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> delete mode 100644 Documentation/devicetree/bindings/iio/accel/adxl372.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> new file mode 100644
> index 000000000000..a6e2893d2ab1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl372.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
> +
> +maintainers:
> + - Stefan Popa <stefan.popa@analog.com>
> +
> +description: |
> + Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports
> + both I2C & SPI interfaces
> + https://www.analog.com/en/products/adxl372.html
> +
> +properties:
> + compatible:
> + enum:
> + - adi,adxl372
> +
> + reg:
> + description: the I2C address or SPI chip select number for the device
> + maxItems: 1
> +
> + interrupts:
> + description:
> + interrupt mapping for IRQ as documented in
> + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Example for a I2C device node */
> + accelerometer@53 {
> + compatible = "adi,adxl372";
> + reg = <0x53>;
> + interrupt-parent = <&gpio>;
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> + };
> + };
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + spi0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + accelerometer@0 {
> + compatible = "adi,adxl372";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + interrupt-parent = <&gpio>;
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> deleted file mode 100644
> index a289964756a7..000000000000
> --- a/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
> -
> -http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf
> -
> -Required properties:
> - - compatible : should be "adi,adxl372"
> - - reg: the I2C address or SPI chip select number for the device
> -
> -Required properties for SPI bus usage:
> - - spi-max-frequency: Max SPI frequency to use
> -
> -Optional properties:
> - - interrupts: interrupt mapping for IRQ as documented in
> - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> -
> -Example for a I2C device node:
> -
> - accelerometer@53 {
> - compatible = "adi,adxl372";
> - reg = <0x53>;
> - interrupt-parent = <&gpio>;
> - interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> - };
> -
> -Example for a SPI device node:
> -
> - accelerometer@0 {
> - compatible = "adi,adxl372";
> - reg = <0>;
> - spi-max-frequency = <1000000>;
> - interrupt-parent = <&gpio>;
> - interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> - };
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] dt-bindings: iio: accel: adxl372: switch to YAML bindings
2019-05-19 11:24 ` Jonathan Cameron
@ 2019-05-20 10:46 ` Alexandru Ardelean
2019-05-31 20:09 ` Lucas Oshiro
0 siblings, 1 reply; 5+ messages in thread
From: Alexandru Ardelean @ 2019-05-20 10:46 UTC (permalink / raw)
To: Jonathan Cameron
Cc: Lucas Oshiro, Hartmut Knaack, Lars-Peter Clausen,
Peter Meerwald-Stadler, Rob Herring, Mark Rutland, Stefan Popa,
linux-iio, devicetree, LKML, kernel-usp, Rodrigo Ribeiro,
Alexandru Ardelean
On Sun, May 19, 2019 at 8:27 PM Jonathan Cameron <jic23@kernel.org> wrote:
>
> On Sat, 18 May 2019 18:55:42 -0300
> Lucas Oshiro <lucasseikioshiro@gmail.com> wrote:
>
> > Convert the old device tree documentation to yaml format.
> >
> > Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
> > Signed-off-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
> > Co-developed-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
> > ---
> >
> > Hello,
> > We've added Stefan Popa as maintainer of the yaml documentation of this driver
> > because we found through git that he was the author of the older documentation.
>
> Definitely going to need an Ack from Stefan for that ;)
CC-ing my work-email
There are some issues with it and mailing lists; I'll hopefully sort
them out in the next weeks.
Stefan is out-of-office.
He'll take a look when he comes back.
I'll add a few notes until then.
I'd still like Stefan's ack to be final.
>
> I've not really gotten yaml formats into my head yet, but from a quick
> look I think this is fine. I will however be looking for review from others
> on these.
>
> Thanks,
>
> Jonathan
>
> >
> > .../bindings/iio/accel/adi,adxl372.yaml | 66 +++++++++++++++++++
> > .../devicetree/bindings/iio/accel/adxl372.txt | 33 ----------
> > 2 files changed, 66 insertions(+), 33 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> > delete mode 100644 Documentation/devicetree/bindings/iio/accel/adxl372.txt
Also update the MAINTAINERS file when changing this.
For reference, many things can be borrowed from the ADXL345, which is
similar (from a dt-binding doc perspective only).
> >
> > diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> > new file mode 100644
> > index 000000000000..a6e2893d2ab1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> > @@ -0,0 +1,66 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl372.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
> > +
> > +maintainers:
> > + - Stefan Popa <stefan.popa@analog.com>
> > +
> > +description: |
> > + Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports
> > + both I2C & SPI interfaces
> > + https://www.analog.com/en/products/adxl372.html
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - adi,adxl372
> > +
> > + reg:
> > + description: the I2C address or SPI chip select number for the device
no need to add a description for reg
it's a standard property
> > + maxItems: 1
> > +
> > + interrupts:
> > + description:
> > + interrupt mapping for IRQ as documented in
> > + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
no need to describe this either
> > + maxItems: 1
> > +
> > +required:
> > + - compatible
> > + - reg
I think interrupts is also required.
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + i2c0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + /* Example for a I2C device node */
> > + accelerometer@53 {
> > + compatible = "adi,adxl372";
> > + reg = <0x53>;
> > + interrupt-parent = <&gpio>;
> > + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> > + };
> > + };
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + spi0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + accelerometer@0 {
> > + compatible = "adi,adxl372";
> > + reg = <0>;
> > + spi-max-frequency = <1000000>;
> > + interrupt-parent = <&gpio>;
> > + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> > + };
> > + };
Rest looks good.
> > diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> > deleted file mode 100644
> > index a289964756a7..000000000000
> > --- a/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> > +++ /dev/null
> > @@ -1,33 +0,0 @@
> > -Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
> > -
> > -http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf
> > -
> > -Required properties:
> > - - compatible : should be "adi,adxl372"
> > - - reg: the I2C address or SPI chip select number for the device
> > -
> > -Required properties for SPI bus usage:
> > - - spi-max-frequency: Max SPI frequency to use
> > -
> > -Optional properties:
> > - - interrupts: interrupt mapping for IRQ as documented in
> > - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> > -
> > -Example for a I2C device node:
> > -
> > - accelerometer@53 {
> > - compatible = "adi,adxl372";
> > - reg = <0x53>;
> > - interrupt-parent = <&gpio>;
> > - interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> > - };
> > -
> > -Example for a SPI device node:
> > -
> > - accelerometer@0 {
> > - compatible = "adi,adxl372";
> > - reg = <0>;
> > - spi-max-frequency = <1000000>;
> > - interrupt-parent = <&gpio>;
> > - interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> > - };
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] dt-bindings: iio: accel: adxl372: switch to YAML bindings
2019-05-20 10:46 ` Alexandru Ardelean
@ 2019-05-31 20:09 ` Lucas Oshiro
0 siblings, 0 replies; 5+ messages in thread
From: Lucas Oshiro @ 2019-05-31 20:09 UTC (permalink / raw)
To: Alexandru Ardelean, Jonathan Cameron
Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler,
Rob Herring, Mark Rutland, Stefan Popa, linux-iio, devicetree,
LKML, kernel-usp, Rodrigo Ribeiro, Alexandru Ardelean
Thanks, Alexandru. We're going to send a new version for this patch.
On 20/05/2019 07:46, Alexandru Ardelean wrote:
> On Sun, May 19, 2019 at 8:27 PM Jonathan Cameron <jic23@kernel.org> wrote:
>>
>> On Sat, 18 May 2019 18:55:42 -0300
>> Lucas Oshiro <lucasseikioshiro@gmail.com> wrote:
>>
>>> Convert the old device tree documentation to yaml format.
>>>
>>> Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
>>> Signed-off-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
>>> Co-developed-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
>>> ---
>>>
>>> Hello,
>>> We've added Stefan Popa as maintainer of the yaml documentation of this driver
>>> because we found through git that he was the author of the older documentation.
>>
>> Definitely going to need an Ack from Stefan for that ;)
>
> CC-ing my work-email
> There are some issues with it and mailing lists; I'll hopefully sort
> them out in the next weeks.
>
> Stefan is out-of-office.
> He'll take a look when he comes back.
>
> I'll add a few notes until then.
>
> I'd still like Stefan's ack to be final.
>
>>
>> I've not really gotten yaml formats into my head yet, but from a quick
>> look I think this is fine. I will however be looking for review from others
>> on these.
>>
>> Thanks,
>>
>> Jonathan
>>
>>>
>>> .../bindings/iio/accel/adi,adxl372.yaml | 66 +++++++++++++++++++
>>> .../devicetree/bindings/iio/accel/adxl372.txt | 33 ----------
>>> 2 files changed, 66 insertions(+), 33 deletions(-)
>>> create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
>>> delete mode 100644 Documentation/devicetree/bindings/iio/accel/adxl372.txt
>
> Also update the MAINTAINERS file when changing this.
> For reference, many things can be borrowed from the ADXL345, which is
> similar (from a dt-binding doc perspective only).
>
>>>
>>> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
>>> new file mode 100644
>>> index 000000000000..a6e2893d2ab1
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
>>> @@ -0,0 +1,66 @@
>>> +# SPDX-License-Identifier: GPL-2.0
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl372.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
>>> +
>>> +maintainers:
>>> + - Stefan Popa <stefan.popa@analog.com>
>>> +
>>> +description: |
>>> + Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports
>>> + both I2C & SPI interfaces
>>> + https://www.analog.com/en/products/adxl372.html
>>> +
>>> +properties:
>>> + compatible:
>>> + enum:
>>> + - adi,adxl372
>>> +
>>> + reg:
>>> + description: the I2C address or SPI chip select number for the device
>
> no need to add a description for reg
> it's a standard property
>
>>> + maxItems: 1
>>> +
>>> + interrupts:
>>> + description:
>>> + interrupt mapping for IRQ as documented in
>>> + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
>
> no need to describe this either
>
>>> + maxItems: 1
>>> +
>>> +required:
>>> + - compatible
>>> + - reg
>
> I think interrupts is also required.
>
>>> +
>>> +examples:
>>> + - |
>>> + #include <dt-bindings/gpio/gpio.h>
>>> + #include <dt-bindings/interrupt-controller/irq.h>
>>> + i2c0 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + /* Example for a I2C device node */
>>> + accelerometer@53 {
>>> + compatible = "adi,adxl372";
>>> + reg = <0x53>;
>>> + interrupt-parent = <&gpio>;
>>> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
>>> + };
>>> + };
>>> + - |
>>> + #include <dt-bindings/gpio/gpio.h>
>>> + #include <dt-bindings/interrupt-controller/irq.h>
>>> + spi0 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + accelerometer@0 {
>>> + compatible = "adi,adxl372";
>>> + reg = <0>;
>>> + spi-max-frequency = <1000000>;
>>> + interrupt-parent = <&gpio>;
>>> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
>>> + };
>>> + };
>
> Rest looks good.
>
>>> diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
>>> deleted file mode 100644
>>> index a289964756a7..000000000000
>>> --- a/Documentation/devicetree/bindings/iio/accel/adxl372.txt
>>> +++ /dev/null
>>> @@ -1,33 +0,0 @@
>>> -Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
>>> -
>>> -http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf
>>> -
>>> -Required properties:
>>> - - compatible : should be "adi,adxl372"
>>> - - reg: the I2C address or SPI chip select number for the device
>>> -
>>> -Required properties for SPI bus usage:
>>> - - spi-max-frequency: Max SPI frequency to use
>>> -
>>> -Optional properties:
>>> - - interrupts: interrupt mapping for IRQ as documented in
>>> - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
>>> -
>>> -Example for a I2C device node:
>>> -
>>> - accelerometer@53 {
>>> - compatible = "adi,adxl372";
>>> - reg = <0x53>;
>>> - interrupt-parent = <&gpio>;
>>> - interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
>>> - };
>>> -
>>> -Example for a SPI device node:
>>> -
>>> - accelerometer@0 {
>>> - compatible = "adi,adxl372";
>>> - reg = <0>;
>>> - spi-max-frequency = <1000000>;
>>> - interrupt-parent = <&gpio>;
>>> - interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
>>> - };
>>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] dt-bindings: iio: accel: adxl372: switch to YAML bindings
2019-05-18 21:55 [PATCH] dt-bindings: iio: accel: adxl372: switch to YAML bindings Lucas Oshiro
2019-05-19 11:24 ` Jonathan Cameron
@ 2019-05-24 10:21 ` Popa, Stefan Serban
1 sibling, 0 replies; 5+ messages in thread
From: Popa, Stefan Serban @ 2019-05-24 10:21 UTC (permalink / raw)
To: lucasseikioshiro, knaack.h, lars, pmeerw, jic23, robh+dt, mark.rutland
Cc: linux-kernel, rodrigorsdc, linux-iio, kernel-usp, devicetree
On Sb, 2019-05-18 at 18:55 -0300, Lucas Oshiro wrote:
> [External]
>
>
> Convert the old device tree documentation to yaml format.
>
> Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
> Signed-off-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
> Co-developed-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
> ---
>
> Hello,
> We've added Stefan Popa as maintainer of the yaml documentation of this
> driver
> because we found through git that he was the author of the older
> documentation.
Acked-by: Stefan Popa <stefan.popa@analog.com>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-05-31 20:09 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-18 21:55 [PATCH] dt-bindings: iio: accel: adxl372: switch to YAML bindings Lucas Oshiro
2019-05-19 11:24 ` Jonathan Cameron
2019-05-20 10:46 ` Alexandru Ardelean
2019-05-31 20:09 ` Lucas Oshiro
2019-05-24 10:21 ` Popa, Stefan Serban
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).