Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/5] counter: new TI eQEP driver
@ 2019-08-07 19:40 David Lechner
  2019-08-07 19:40 ` [PATCH v2 1/5] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem David Lechner
                   ` (4 more replies)
  0 siblings, 5 replies; 11+ messages in thread
From: David Lechner @ 2019-08-07 19:40 UTC (permalink / raw)
  To: linux-iio, linux-omap
  Cc: David Lechner, Rob Herring, Mark Rutland, Benoît Cousson,
	Tony Lindgren, William Breathitt Gray, Thierry Reding,
	devicetree, linux-kernel, linux-pwm

This series adds device tree bindings and a new counter driver for the Texas
Instruments Enhanced Quadrature Encoder Pulse (eQEP).

As mentioned in one of the commit messages, to start with, the driver only
supports reading the current counter value and setting the min/max values.
Other features can be added as the counter subsystem gains support for them.

v2 changes:
- New patch to move TI PWMSS driver from drivers/pwm/ to drivers/bus/
- Device tree bindings converted to .yaml format
- Device tree clock renamed from "fck" to "sysclkout"
- Dropped unused index and strobe signals from counter driver
- Added synapses and actions to counter driver
- Fixed base in of kstrtouint()
- Clarifications in commit messages

This series has been tested on a BeagleBone Blue with the following script:

#!/usr/bin/env python3

from os import path
from time import sleep

COUNTER_PATH = '/sys/bus/counter/devices'
COUNTERS = ['counter0', 'counter1', 'counter2']
COUNT0 = 'count0'
COUNT = 'count'
FUNCTION = 'function'
CEILING = 'ceiling'
FLOOR = 'floor'
ENABLE = 'enable'

cnts = []

for c in COUNTERS:
    function_path = path.join(COUNTER_PATH, c, COUNT0, FUNCTION)
    with open(function_path, 'w') as f:
        f.write('quadrature x4')
    floor_path = path.join(COUNTER_PATH, c, COUNT0, FLOOR)
    with open(floor_path, 'w') as f:
        f.write(str(0))
    ceiling_path = path.join(COUNTER_PATH, c, COUNT0, CEILING)
    with open(ceiling_path, 'w') as f:
        f.write(str(0xffffffff))
    enable_path = path.join(COUNTER_PATH, c, COUNT0, ENABLE)
    with open(enable_path, 'w') as f:
        f.write('1')

    cnt_path = path.join(COUNTER_PATH, c, COUNT0, COUNT)
    cnts.append(open(cnt_path, 'r'))

while True:
    for c in cnts:
        c.seek(0)
        val = int(c.read())
        if val >= 0x80000000:
            val -= 0x100000000
        print(val, end=' ')
    print()
    sleep(1)

David Lechner (5):
  bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
  dt-bindings: counter: new bindings for TI eQEP
  counter: new TI eQEP driver
  ARM: dts: am33xx: Add nodes for eQEP
  ARM: dts: am335x-boneblue: Enable eQEP

 .../devicetree/bindings/counter/ti-eqep.yaml  |  50 ++
 MAINTAINERS                                   |   6 +
 arch/arm/boot/dts/am335x-boneblue.dts         |  54 ++
 arch/arm/boot/dts/am33xx-l4.dtsi              |  27 +
 drivers/bus/Kconfig                           |   9 +
 drivers/bus/Makefile                          |   1 +
 drivers/{pwm/pwm-tipwmss.c => bus/ti-pwmss.c} |   0
 drivers/counter/Kconfig                       |  12 +
 drivers/counter/Makefile                      |   1 +
 drivers/counter/ti-eqep.c                     | 460 ++++++++++++++++++
 drivers/pwm/Kconfig                           |   9 -
 drivers/pwm/Makefile                          |   1 -
 12 files changed, 620 insertions(+), 10 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/counter/ti-eqep.yaml
 rename drivers/{pwm/pwm-tipwmss.c => bus/ti-pwmss.c} (100%)
 create mode 100644 drivers/counter/ti-eqep.c

-- 
2.17.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2 1/5] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
  2019-08-07 19:40 [PATCH v2 0/5] counter: new TI eQEP driver David Lechner
@ 2019-08-07 19:40 ` David Lechner
  2019-08-07 19:40 ` [PATCH v2 2/5] dt-bindings: counter: new bindings for TI eQEP David Lechner
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 11+ messages in thread
From: David Lechner @ 2019-08-07 19:40 UTC (permalink / raw)
  To: linux-iio, linux-omap
  Cc: David Lechner, Rob Herring, Mark Rutland, Benoît Cousson,
	Tony Lindgren, William Breathitt Gray, Thierry Reding,
	devicetree, linux-kernel, linux-pwm

The TI PWMSS driver is a simple bus driver for providing power
power management for the PWM peripherals on TI AM33xx SoCs, namely
eCAP, eHRPWM and eQEP. The eQEP is a counter rather than a PWM, so
it does not make sense to have the bus driver in the PWM subsystem
since the PWMSS is not exclusive to PWM devices.

Signed-off-by: David Lechner <david@lechnology.com>
---

v2 changes:
- new patch

 drivers/bus/Kconfig                           | 9 +++++++++
 drivers/bus/Makefile                          | 1 +
 drivers/{pwm/pwm-tipwmss.c => bus/ti-pwmss.c} | 0
 drivers/pwm/Kconfig                           | 9 ---------
 drivers/pwm/Makefile                          | 1 -
 5 files changed, 10 insertions(+), 10 deletions(-)
 rename drivers/{pwm/pwm-tipwmss.c => bus/ti-pwmss.c} (100%)

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 1851112ccc29..4eeb15839ce0 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -140,6 +140,15 @@ config TEGRA_GMI
 	  Driver for the Tegra Generic Memory Interface bus which can be used
 	  to attach devices such as NOR, UART, FPGA and more.
 
+config  TI_PWMSS
+	bool
+	default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM)
+	help
+	  PWM Subsystem driver support for AM33xx SOC.
+
+	  PWM submodules require PWM config space access from submodule
+	  drivers and require common parent driver support.
+
 config TI_SYSC
 	bool "TI sysc interconnect target module driver"
 	depends on ARCH_OMAP2PLUS
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index ca300b1914ce..a2d13cf4a877 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
 obj-$(CONFIG_SIMPLE_PM_BUS)	+= simple-pm-bus.o
 obj-$(CONFIG_TEGRA_ACONNECT)	+= tegra-aconnect.o
 obj-$(CONFIG_TEGRA_GMI)		+= tegra-gmi.o
+obj-$(CONFIG_TI_PWMSS)		+= ti-pwmss.o
 obj-$(CONFIG_TI_SYSC)		+= ti-sysc.o
 obj-$(CONFIG_TS_NBUS)		+= ts-nbus.o
 obj-$(CONFIG_UNIPHIER_SYSTEM_BUS)	+= uniphier-system-bus.o
diff --git a/drivers/pwm/pwm-tipwmss.c b/drivers/bus/ti-pwmss.c
similarity index 100%
rename from drivers/pwm/pwm-tipwmss.c
rename to drivers/bus/ti-pwmss.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index a7e57516959e..300396564769 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -497,15 +497,6 @@ config  PWM_TIEHRPWM
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-tiehrpwm.
 
-config  PWM_TIPWMSS
-	bool
-	default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM)
-	help
-	  PWM Subsystem driver support for AM33xx SOC.
-
-	  PWM submodules require PWM config space access from submodule
-	  drivers and require common parent driver support.
-
 config PWM_TWL
 	tristate "TWL4030/6030 PWM support"
 	depends on TWL4030_CORE
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 76b555b51887..f67eb6e9294d 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -49,7 +49,6 @@ obj-$(CONFIG_PWM_SUN4I)		+= pwm-sun4i.o
 obj-$(CONFIG_PWM_TEGRA)		+= pwm-tegra.o
 obj-$(CONFIG_PWM_TIECAP)	+= pwm-tiecap.o
 obj-$(CONFIG_PWM_TIEHRPWM)	+= pwm-tiehrpwm.o
-obj-$(CONFIG_PWM_TIPWMSS)	+= pwm-tipwmss.o
 obj-$(CONFIG_PWM_TWL)		+= pwm-twl.o
 obj-$(CONFIG_PWM_TWL_LED)	+= pwm-twl-led.o
 obj-$(CONFIG_PWM_VT8500)	+= pwm-vt8500.o
-- 
2.17.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2 2/5] dt-bindings: counter: new bindings for TI eQEP
  2019-08-07 19:40 [PATCH v2 0/5] counter: new TI eQEP driver David Lechner
  2019-08-07 19:40 ` [PATCH v2 1/5] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem David Lechner
@ 2019-08-07 19:40 ` David Lechner
  2019-08-21 20:31   ` Rob Herring
  2019-08-07 19:40 ` [PATCH v2 3/5] counter: new TI eQEP driver David Lechner
                   ` (2 subsequent siblings)
  4 siblings, 1 reply; 11+ messages in thread
From: David Lechner @ 2019-08-07 19:40 UTC (permalink / raw)
  To: linux-iio, linux-omap
  Cc: David Lechner, Rob Herring, Mark Rutland, Benoît Cousson,
	Tony Lindgren, William Breathitt Gray, Thierry Reding,
	devicetree, linux-kernel, linux-pwm

This documents device tree binding for the Texas Instruments Enhanced
Quadrature Encoder Pulse (eQEP) Module found in various TI SoCs.

Signed-off-by: David Lechner <david@lechnology.com>
---

v2 changes:
- convert to .yaml format
- rename clock to "sysclkout"

 .../devicetree/bindings/counter/ti-eqep.yaml  | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/counter/ti-eqep.yaml

diff --git a/Documentation/devicetree/bindings/counter/ti-eqep.yaml b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
new file mode 100644
index 000000000000..8f8b2e87e5c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti-eqep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) Module
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+properties:
+  compatible:
+    const: "ti,am3352-eqep"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: The eQEP event interrupt
+    maxItems: 1
+
+  clocks:
+    description: The clock that determines the SYSCLKOUT rate for the eQEP
+                 peripheral.
+    maxItems: 1
+
+  clock-names:
+    const: sysclkout
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    eqep0: eqep@180 {
+        compatible = "ti,am3352-eqep";
+        reg = <0x180 0x80>;
+        clocks = <&l4ls_gclk>;
+        clock-names = "sysclkout";
+        interrupts = <79>;
+    };
+
+...
-- 
2.17.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2 3/5] counter: new TI eQEP driver
  2019-08-07 19:40 [PATCH v2 0/5] counter: new TI eQEP driver David Lechner
  2019-08-07 19:40 ` [PATCH v2 1/5] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem David Lechner
  2019-08-07 19:40 ` [PATCH v2 2/5] dt-bindings: counter: new bindings for TI eQEP David Lechner
@ 2019-08-07 19:40 ` David Lechner
  2019-08-07 19:49   ` David Lechner
                     ` (2 more replies)
  2019-08-07 19:40 ` [PATCH v2 4/5] ARM: dts: am33xx: Add nodes for eQEP David Lechner
  2019-08-07 19:40 ` [PATCH v2 5/5] ARM: dts: am335x-boneblue: Enable eQEP David Lechner
  4 siblings, 3 replies; 11+ messages in thread
From: David Lechner @ 2019-08-07 19:40 UTC (permalink / raw)
  To: linux-iio, linux-omap
  Cc: David Lechner, Rob Herring, Mark Rutland, Benoît Cousson,
	Tony Lindgren, William Breathitt Gray, Thierry Reding,
	devicetree, linux-kernel, linux-pwm

This adds a new counter driver for the Texas Instruments Enhanced
Quadrature Encoder Pulse (eQEP) module.

Only very basic functionality is currently implemented - only enough to
be able to read the position. The actual device has many more features
which can be added to the driver on an as-needed basis.

It is not possible to read the QEPA/B signal values in hardware, so
that feature is omitted.

The TI_PWMSS kernel option is selected in Kconfig to enable the parent
bus, which is needed for power management.

Signed-off-by: David Lechner <david@lechnology.com>
---

v2 changes:
- Dropped unused index and strobe signals
- Added synapses and actions
- Fixed base in of kstrtouint()
- Clarifications in commit message

 MAINTAINERS               |   6 +
 drivers/bus/Kconfig       |   2 +-
 drivers/counter/Kconfig   |  12 +
 drivers/counter/Makefile  |   1 +
 drivers/counter/ti-eqep.c | 460 ++++++++++++++++++++++++++++++++++++++
 5 files changed, 480 insertions(+), 1 deletion(-)
 create mode 100644 drivers/counter/ti-eqep.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 783569e3c4b4..53c28d52964c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16014,6 +16014,12 @@ S:	Maintained
 F:	drivers/media/platform/davinci/
 F:	include/media/davinci/
 
+TI ENHANCED QUADRATURE ENCODER PULSE (eQEP) DRIVER
+R:	David Lechner <david@lechnology.com>
+L:	linux-iio@vger.kernel.org
+F:	Documentation/devicetree/bindings/counter/ti-eqep.yaml
+F:	drivers/counter/ti-eqep.c
+
 TI ETHERNET SWITCH DRIVER (CPSW)
 R:	Grygorii Strashko <grygorii.strashko@ti.com>
 L:	linux-omap@vger.kernel.org
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 4eeb15839ce0..04db7fce4604 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -142,7 +142,7 @@ config TEGRA_GMI
 
 config  TI_PWMSS
 	bool
-	default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM)
+	default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM || TI_EQEP)
 	help
 	  PWM Subsystem driver support for AM33xx SOC.
 
diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
index 2967d0a9ff91..7eeb310f0cda 100644
--- a/drivers/counter/Kconfig
+++ b/drivers/counter/Kconfig
@@ -49,6 +49,18 @@ config STM32_LPTIMER_CNT
 	  To compile this driver as a module, choose M here: the
 	  module will be called stm32-lptimer-cnt.
 
+config TI_EQEP
+	tristate "TI eQEP counter driver"
+	depends on (SOC_AM33XX || COMPILE_TEST)
+	select PWM
+	select REGMAP_MMIO
+	help
+	  Select this option to enable the Texas Instruments Enhanced Quadrature
+	  Encoder Pulse (eQEP) counter driver.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ti-eqep.
+
 config FTM_QUADDEC
 	tristate "Flex Timer Module Quadrature decoder driver"
 	depends on HAS_IOMEM && OF
diff --git a/drivers/counter/Makefile b/drivers/counter/Makefile
index 40d35522937d..55142d1f4c43 100644
--- a/drivers/counter/Makefile
+++ b/drivers/counter/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_COUNTER) += counter.o
 obj-$(CONFIG_104_QUAD_8)	+= 104-quad-8.o
 obj-$(CONFIG_STM32_TIMER_CNT)	+= stm32-timer-cnt.o
 obj-$(CONFIG_STM32_LPTIMER_CNT)	+= stm32-lptimer-cnt.o
+obj-$(CONFIG_TI_EQEP)		+= ti-eqep.o
 obj-$(CONFIG_FTM_QUADDEC)	+= ftm-quaddec.o
diff --git a/drivers/counter/ti-eqep.c b/drivers/counter/ti-eqep.c
new file mode 100644
index 000000000000..a761b868c12b
--- /dev/null
+++ b/drivers/counter/ti-eqep.c
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 David Lechner <david@lechnology.com>
+ *
+ * Counter driver for Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP)
+ */
+
+#include <linux/bitops.h>
+#include <linux/counter.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+/* 32-bit registers */
+#define QPOSCNT		0x0
+#define QPOSINIT	0x4
+#define QPOSMAX		0x8
+#define QPOSCMP		0xc
+#define QPOSILAT	0x10
+#define QPOSSLAT	0x14
+#define QPOSLAT		0x18
+#define QUTMR		0x1c
+#define QUPRD		0x20
+
+/* 16-bit registers */
+#define QWDTMR		0x0	/* 0x24 */
+#define QWDPRD		0x2	/* 0x26 */
+#define QDECCTL		0x4	/* 0x28 */
+#define QEPCTL		0x6	/* 0x2a */
+#define QCAPCTL		0x8	/* 0x2c */
+#define QPOSCTL		0xa	/* 0x2e */
+#define QEINT		0xc	/* 0x30 */
+#define QFLG		0xe	/* 0x32 */
+#define QCLR		0x10	/* 0x34 */
+#define QFRC		0x12	/* 0x36 */
+#define QEPSTS		0x14	/* 0x38 */
+#define QCTMR		0x16	/* 0x3a */
+#define QCPRD		0x18	/* 0x3c */
+#define QCTMRLAT	0x1a	/* 0x3e */
+#define QCPRDLAT	0x1c	/* 0x40 */
+
+#define QDECCTL_QSRC_SHIFT	14
+#define QDECCTL_QSRC		GENMASK(15, 14)
+#define QDECCTL_SOEN		BIT(13)
+#define QDECCTL_SPSEL		BIT(12)
+#define QDECCTL_XCR		BIT(11)
+#define QDECCTL_SWAP		BIT(10)
+#define QDECCTL_IGATE		BIT(9)
+#define QDECCTL_QAP		BIT(8)
+#define QDECCTL_QBP		BIT(7)
+#define QDECCTL_QIP		BIT(6)
+#define QDECCTL_QSP		BIT(5)
+
+#define QEPCTL_FREE_SOFT	GENMASK(15, 14)
+#define QEPCTL_PCRM		GENMASK(13, 12)
+#define QEPCTL_SEI		GENMASK(11, 10)
+#define QEPCTL_IEI		GENMASK(9, 8)
+#define QEPCTL_SWI		BIT(7)
+#define QEPCTL_SEL		BIT(6)
+#define QEPCTL_IEL		GENMASK(5, 4)
+#define QEPCTL_PHEN		BIT(3)
+#define QEPCTL_QCLM		BIT(2)
+#define QEPCTL_UTE		BIT(1)
+#define QEPCTL_WDE		BIT(0)
+
+/* EQEP Inputs */
+enum {
+	TI_EQEP_SIGNAL_QEPA,	/* QEPA/XCLK */
+	TI_EQEP_SIGNAL_QEPB,	/* QEPB/XDIR */
+};
+
+/* Position Counter Input Modes */
+enum {
+	TI_EQEP_COUNT_FUNC_QUAD_COUNT,
+	TI_EQEP_COUNT_FUNC_DIR_COUNT,
+	TI_EQEP_COUNT_FUNC_UP_COUNT,
+	TI_EQEP_COUNT_FUNC_DOWN_COUNT,
+};
+
+enum {
+	TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES,
+	TI_EQEP_SYNAPSE_ACTION_RISING_EDGE,
+	TI_EQEP_SYNAPSE_ACTION_NONE,
+};
+
+struct ti_eqep_cnt {
+	struct counter_device counter;
+	struct regmap *regmap32;
+	struct regmap *regmap16;
+};
+
+static int ti_eqep_count_read(struct counter_device *counter,
+			      struct counter_count *count,
+			      struct counter_count_read_value *val)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 cnt;
+
+	regmap_read(priv->regmap32, QPOSCNT, &cnt);
+	counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &cnt);
+
+	return 0;
+}
+
+static int ti_eqep_count_write(struct counter_device *counter,
+			       struct counter_count *count,
+			       struct counter_count_write_value *val)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 cnt, max;
+	int err;
+
+	err = counter_count_write_value_get(&cnt, COUNTER_COUNT_POSITION, val);
+	if (err)
+		return err;
+
+	regmap_read(priv->regmap32, QPOSMAX, &max);
+	if (cnt > max)
+		return -EINVAL;
+
+	return regmap_write(priv->regmap32, QPOSCNT, cnt);
+}
+
+static int ti_eqep_function_get(struct counter_device *counter,
+				struct counter_count *count, size_t *function)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 qdecctl;
+
+	regmap_read(priv->regmap16, QDECCTL, &qdecctl);
+	*function = (qdecctl & QDECCTL_QSRC) >> QDECCTL_QSRC_SHIFT;
+
+	return 0;
+}
+
+static int ti_eqep_function_set(struct counter_device *counter,
+				struct counter_count *count, size_t function)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+
+	return regmap_write_bits(priv->regmap16, QDECCTL, QDECCTL_QSRC,
+				 function << QDECCTL_QSRC_SHIFT);
+}
+
+static int ti_eqep_action_get(struct counter_device *counter,
+			      struct counter_count *count,
+			      struct counter_synapse *synapse, size_t *action)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	size_t function;
+	u32 qdecctl;
+	int err;
+
+	err = ti_eqep_function_get(counter, count, &function);
+	if (err)
+		return err;
+
+	switch (function) {
+	case TI_EQEP_COUNT_FUNC_QUAD_COUNT:
+		/* In quadrature mode, the rising and falling edge of both
+		 * QEPA and QEPB trigger QCLK.
+		 */
+		*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
+		break;
+	case TI_EQEP_COUNT_FUNC_DIR_COUNT:
+		/* In direction-count mode only rising edge of QEPA is counted
+		 * and QEPB gives direction.
+		 */
+		switch (synapse->signal->id) {
+		case TI_EQEP_SIGNAL_QEPA:
+			*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
+			break;
+		default:
+			*action = TI_EQEP_SYNAPSE_ACTION_NONE;
+			break;
+		}
+		break;
+	case TI_EQEP_COUNT_FUNC_UP_COUNT:
+	case TI_EQEP_COUNT_FUNC_DOWN_COUNT:
+		/* In up/down-count modes only QEPA is counted and QEPB is not
+		 * used.
+		 */
+		switch (synapse->signal->id) {
+		case TI_EQEP_SIGNAL_QEPA:
+			err = regmap_read(priv->regmap16, QDECCTL, &qdecctl);
+			if (err)
+				return err;
+
+			if (qdecctl & QDECCTL_XCR)
+				*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
+			else
+				*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
+			break;
+		default:
+			*action = TI_EQEP_SYNAPSE_ACTION_NONE;
+			break;
+		}
+		break;
+	}
+
+	return 0;
+}
+
+static const struct counter_ops ti_eqep_counter_ops = {
+	.count_read	= ti_eqep_count_read,
+	.count_write	= ti_eqep_count_write,
+	.function_get	= ti_eqep_function_get,
+	.function_set	= ti_eqep_function_set,
+	.action_get	= ti_eqep_action_get,
+};
+
+static ssize_t ti_eqep_position_ceiling_read(struct counter_device *counter,
+					     struct counter_count *count,
+					     void *ext_priv, char *buf)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 qposmax;
+
+	regmap_read(priv->regmap32, QPOSMAX, &qposmax);
+
+	return sprintf(buf, "%u\n", qposmax);
+}
+
+static ssize_t ti_eqep_position_ceiling_write(struct counter_device *counter,
+					      struct counter_count *count,
+					      void *ext_priv, const char *buf,
+					      size_t len)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	int err;
+	u32 res;
+
+	err = kstrtouint(buf, 0, &res);
+	if (err < 0)
+		return err;
+
+	regmap_write(priv->regmap32, QPOSMAX, res);
+
+	return len;
+}
+
+static ssize_t ti_eqep_position_floor_read(struct counter_device *counter,
+					   struct counter_count *count,
+					   void *ext_priv, char *buf)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 qposinit;
+
+	regmap_read(priv->regmap32, QPOSINIT, &qposinit);
+
+	return sprintf(buf, "%u\n", qposinit);
+}
+
+static ssize_t ti_eqep_position_floor_write(struct counter_device *counter,
+					    struct counter_count *count,
+					    void *ext_priv, const char *buf,
+					    size_t len)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	int err;
+	u32 res;
+
+	err = kstrtouint(buf, 0, &res);
+	if (err < 0)
+		return err;
+
+	regmap_write(priv->regmap32, QPOSINIT, res);
+
+	return len;
+}
+
+static ssize_t ti_eqep_position_enable_read(struct counter_device *counter,
+					    struct counter_count *count,
+					    void *ext_priv, char *buf)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	u32 qepctl;
+
+	regmap_read(priv->regmap16, QEPCTL, &qepctl);
+
+	return sprintf(buf, "%u\n", !!(qepctl & QEPCTL_PHEN));
+}
+
+static ssize_t ti_eqep_position_enable_write(struct counter_device *counter,
+					     struct counter_count *count,
+					     void *ext_priv, const char *buf,
+					     size_t len)
+{
+	struct ti_eqep_cnt *priv = counter->priv;
+	int err;
+	bool res;
+
+	err = kstrtobool(buf, &res);
+	if (err < 0)
+		return err;
+
+	regmap_write_bits(priv->regmap16, QEPCTL, QEPCTL_PHEN, res ? -1 : 0);
+
+	return len;
+}
+
+static struct counter_count_ext ti_eqep_position_ext[] = {
+	{
+		.name	= "ceiling",
+		.read	= ti_eqep_position_ceiling_read,
+		.write	= ti_eqep_position_ceiling_write,
+	},
+	{
+		.name	= "floor",
+		.read	= ti_eqep_position_floor_read,
+		.write	= ti_eqep_position_floor_write,
+	},
+	{
+		.name	= "enable",
+		.read	= ti_eqep_position_enable_read,
+		.write	= ti_eqep_position_enable_write,
+	},
+};
+
+static struct counter_signal ti_eqep_signals[] = {
+	[TI_EQEP_SIGNAL_QEPA] = {
+		.id = TI_EQEP_SIGNAL_QEPA,
+		.name = "QEPA"
+	},
+	[TI_EQEP_SIGNAL_QEPB] = {
+		.id = TI_EQEP_SIGNAL_QEPB,
+		.name = "QEPB"
+	},
+};
+
+static const enum counter_count_function ti_eqep_position_functions[] = {
+	[TI_EQEP_COUNT_FUNC_QUAD_COUNT]	= COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
+	[TI_EQEP_COUNT_FUNC_DIR_COUNT]	= COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
+	[TI_EQEP_COUNT_FUNC_UP_COUNT]	= COUNTER_COUNT_FUNCTION_INCREASE,
+	[TI_EQEP_COUNT_FUNC_DOWN_COUNT]	= COUNTER_COUNT_FUNCTION_DECREASE,
+};
+
+static const enum counter_synapse_action ti_eqep_position_synapse_actions[] = {
+	[TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES]	= COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
+	[TI_EQEP_SYNAPSE_ACTION_RISING_EDGE]	= COUNTER_SYNAPSE_ACTION_RISING_EDGE,
+	[TI_EQEP_SYNAPSE_ACTION_NONE]		= COUNTER_SYNAPSE_ACTION_NONE,
+};
+
+static struct counter_synapse ti_eqep_position_synapses[] = {
+	{
+		.action		= TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES,
+		.actions_list	= ti_eqep_position_synapse_actions,
+		.num_actions	= ARRAY_SIZE(ti_eqep_position_synapse_actions),
+		.signal		= &ti_eqep_signals[TI_EQEP_SIGNAL_QEPA],
+	},
+	{
+		.action		= TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES,
+		.actions_list	= ti_eqep_position_synapse_actions,
+		.num_actions	= ARRAY_SIZE(ti_eqep_position_synapse_actions),
+		.signal		= &ti_eqep_signals[TI_EQEP_SIGNAL_QEPB],
+	},
+};
+
+static struct counter_count ti_eqep_counts[] = {
+	{
+		.id		= 0,
+		.name		= "QPOSCNT",
+		.functions_list	= ti_eqep_position_functions,
+		.num_functions	= ARRAY_SIZE(ti_eqep_position_functions),
+		.synapses	= ti_eqep_position_synapses,
+		.num_synapses	= ARRAY_SIZE(ti_eqep_position_synapses),
+		.ext		= ti_eqep_position_ext,
+		.num_ext	= ARRAY_SIZE(ti_eqep_position_ext),
+	},
+};
+
+static const struct regmap_config ti_eqep_regmap32_config = {
+	.name = "32-bit",
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 0x24,
+};
+
+static const struct regmap_config ti_eqep_regmap16_config = {
+	.name = "16-bit",
+	.reg_bits = 16,
+	.val_bits = 16,
+	.reg_stride = 2,
+	.max_register = 0x1e,
+};
+
+static int ti_eqep_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ti_eqep_cnt *priv;
+	struct resource *res;
+	void __iomem *base;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap32 = devm_regmap_init_mmio(dev, base,
+					       &ti_eqep_regmap32_config);
+	if (IS_ERR(priv->regmap32))
+		return PTR_ERR(priv->regmap32);
+
+	priv->regmap16 = devm_regmap_init_mmio(dev, base + 0x24,
+					       &ti_eqep_regmap16_config);
+	if (IS_ERR(priv->regmap16))
+		return PTR_ERR(priv->regmap16);
+
+	priv->counter.name = dev_name(dev);
+	priv->counter.parent = dev;
+	priv->counter.ops = &ti_eqep_counter_ops;
+	priv->counter.counts = ti_eqep_counts;
+	priv->counter.num_counts = ARRAY_SIZE(ti_eqep_counts);
+	priv->counter.signals = ti_eqep_signals;
+	priv->counter.num_signals = ARRAY_SIZE(ti_eqep_signals);
+	priv->counter.priv = priv;
+
+	pm_runtime_enable(dev);
+	pm_runtime_get(dev);
+
+	return devm_counter_register(dev, &priv->counter);
+}
+
+static int ti_eqep_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	pm_runtime_put(dev),
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+static const struct of_device_id ti_eqep_of_match[] = {
+	{ .compatible = "ti,am3352-eqep", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ti_eqep_of_match);
+
+static struct platform_driver ti_eqep_driver = {
+	.probe = ti_eqep_probe,
+	.remove = ti_eqep_remove,
+	.driver = {
+		.name = "ti-eqep-cnt",
+		.of_match_table = ti_eqep_of_match,
+	},
+};
+module_platform_driver(ti_eqep_driver);
+
+MODULE_AUTHOR("David Lechner <david@lechnology.com>");
+MODULE_DESCRIPTION("TI eQEP counter driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2 4/5] ARM: dts: am33xx: Add nodes for eQEP
  2019-08-07 19:40 [PATCH v2 0/5] counter: new TI eQEP driver David Lechner
                   ` (2 preceding siblings ...)
  2019-08-07 19:40 ` [PATCH v2 3/5] counter: new TI eQEP driver David Lechner
@ 2019-08-07 19:40 ` David Lechner
  2019-08-07 19:40 ` [PATCH v2 5/5] ARM: dts: am335x-boneblue: Enable eQEP David Lechner
  4 siblings, 0 replies; 11+ messages in thread
From: David Lechner @ 2019-08-07 19:40 UTC (permalink / raw)
  To: linux-iio, linux-omap
  Cc: David Lechner, Rob Herring, Mark Rutland, Benoît Cousson,
	Tony Lindgren, William Breathitt Gray, Thierry Reding,
	devicetree, linux-kernel, linux-pwm

This adds new nodes for the Texas Instruments Enhanced Quadrature
Encoder Pulse (eQEP) module in the PWM subsystem on AM33XX.

Signed-off-by: David Lechner <david@lechnology.com>
---

v2 changes:
- clocks renamed to "sysclkout"

 arch/arm/boot/dts/am33xx-l4.dtsi | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 3b1fb2ba4dff..47d75f4a81e1 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1908,6 +1908,15 @@
 					status = "disabled";
 				};
 
+				eqep0: eqep@180 {
+					compatible = "ti,am3352-eqep";
+					reg = <0x180 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "sysclkout";
+					interrupts = <79>;
+					status = "disabled";
+				};
+
 				ehrpwm0: pwm@200 {
 					compatible = "ti,am3352-ehrpwm",
 						     "ti,am33xx-ehrpwm";
@@ -1961,6 +1970,15 @@
 					status = "disabled";
 				};
 
+				eqep1: eqep@180 {
+					compatible = "ti,am3352-eqep";
+					reg = <0x180 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "sysclkout";
+					interrupts = <88>;
+					status = "disabled";
+				};
+
 				ehrpwm1: pwm@200 {
 					compatible = "ti,am3352-ehrpwm",
 						     "ti,am33xx-ehrpwm";
@@ -2014,6 +2032,15 @@
 					status = "disabled";
 				};
 
+				eqep2: eqep@180 {
+					compatible = "ti,am3352-eqep";
+					reg = <0x180 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "sysclkout";
+					interrupts = <89>;
+					status = "disabled";
+				};
+
 				ehrpwm2: pwm@200 {
 					compatible = "ti,am3352-ehrpwm",
 						     "ti,am33xx-ehrpwm";
-- 
2.17.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2 5/5] ARM: dts: am335x-boneblue: Enable eQEP
  2019-08-07 19:40 [PATCH v2 0/5] counter: new TI eQEP driver David Lechner
                   ` (3 preceding siblings ...)
  2019-08-07 19:40 ` [PATCH v2 4/5] ARM: dts: am33xx: Add nodes for eQEP David Lechner
@ 2019-08-07 19:40 ` David Lechner
  4 siblings, 0 replies; 11+ messages in thread
From: David Lechner @ 2019-08-07 19:40 UTC (permalink / raw)
  To: linux-iio, linux-omap
  Cc: David Lechner, Rob Herring, Mark Rutland, Benoît Cousson,
	Tony Lindgren, William Breathitt Gray, Thierry Reding,
	devicetree, linux-kernel, linux-pwm

This enables the Enhanced Quadrature Encoder Pulse (eQEP) module for
connectors E1, E2 and E3 on BeagleBone Blue.

Signed-off-by: David Lechner <david@lechnology.com>
---

v2 changes:
- none

 arch/arm/boot/dts/am335x-boneblue.dts | 54 +++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 0257576d5d16..df3978ce061c 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -258,6 +258,30 @@
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7)		/* (M16) gmii1_rxd0.gpio2[21] */
 		>;
 	};
+
+	/* E1 */
+	eqep0_pins: pinmux_eqep0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE1)		/* (B12) mcasp0_aclkr.eQEP0A_in */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT, MUX_MODE1)		/* (C13) mcasp0_fsr.eQEP0B_in */
+		>;
+	};
+
+	/* E2 */
+	eqep1_pins: pinmux_eqep1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT, MUX_MODE2)		/* (V2) lcd_data12.eQEP1A_in */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_INPUT, MUX_MODE2)		/* (V3) lcd_data13.eQEP1B_in */
+		>;
+	};
+
+	/* E3 */
+	eqep2_pins: pinmux_eqep2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE4)		/* (T12) gpmc_ad12.eQEP2A_in */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE4)		/* (R12) gpmc_ad13.eQEP2B_in */
+		>;
+	};
 };
 
 &uart0 {
@@ -530,3 +554,33 @@
 		line-name = "LS_BUF_EN";
 	};
 };
+
+&epwmss0 {
+	status = "okay";
+};
+
+&eqep0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&eqep0_pins>;
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&eqep1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&eqep1_pins>;
+};
+
+&epwmss2 {
+	status = "okay";
+};
+
+&eqep2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&eqep2_pins>;
+};
-- 
2.17.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 3/5] counter: new TI eQEP driver
  2019-08-07 19:40 ` [PATCH v2 3/5] counter: new TI eQEP driver David Lechner
@ 2019-08-07 19:49   ` David Lechner
  2019-08-11  9:23   ` Jonathan Cameron
  2019-08-15 12:37   ` William Breathitt Gray
  2 siblings, 0 replies; 11+ messages in thread
From: David Lechner @ 2019-08-07 19:49 UTC (permalink / raw)
  To: linux-iio, linux-omap
  Cc: Rob Herring, Mark Rutland, Benoît Cousson, Tony Lindgren,
	William Breathitt Gray, Thierry Reding, devicetree, linux-kernel,
	linux-pwm

On 8/7/19 2:40 PM, David Lechner wrote:
> diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
> index 2967d0a9ff91..7eeb310f0cda 100644
> --- a/drivers/counter/Kconfig
> +++ b/drivers/counter/Kconfig
> @@ -49,6 +49,18 @@ config STM32_LPTIMER_CNT
>   	  To compile this driver as a module, choose M here: the
>   	  module will be called stm32-lptimer-cnt.
>   
> +config TI_EQEP
> +	tristate "TI eQEP counter driver"
> +	depends on (SOC_AM33XX || COMPILE_TEST)
> +	select PWM

oops, missed removing `select PWM`. This line is no longer needed with
patch 1/5.

> +	select REGMAP_MMIO
> +	help
> +	  Select this option to enable the Texas Instruments Enhanced Quadrature
> +	  Encoder Pulse (eQEP) counter driver.
> +
> +	  To compile this driver as a module, choose M here: the module will be
> +	  called ti-eqep.
> +
>   config FTM_QUADDEC
>   	tristate "Flex Timer Module Quadrature decoder driver"
>   	depends on HAS_IOMEM && OF

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 3/5] counter: new TI eQEP driver
  2019-08-07 19:40 ` [PATCH v2 3/5] counter: new TI eQEP driver David Lechner
  2019-08-07 19:49   ` David Lechner
@ 2019-08-11  9:23   ` Jonathan Cameron
  2019-08-11 19:15     ` David Lechner
  2019-08-15 12:37   ` William Breathitt Gray
  2 siblings, 1 reply; 11+ messages in thread
From: Jonathan Cameron @ 2019-08-11  9:23 UTC (permalink / raw)
  To: David Lechner
  Cc: linux-iio, linux-omap, Rob Herring, Mark Rutland,
	Benoît Cousson, Tony Lindgren, William Breathitt Gray,
	Thierry Reding, devicetree, linux-kernel, linux-pwm

On Wed,  7 Aug 2019 14:40:21 -0500
David Lechner <david@lechnology.com> wrote:

> This adds a new counter driver for the Texas Instruments Enhanced
> Quadrature Encoder Pulse (eQEP) module.
> 
> Only very basic functionality is currently implemented - only enough to
> be able to read the position. The actual device has many more features
> which can be added to the driver on an as-needed basis.
> 
> It is not possible to read the QEPA/B signal values in hardware, so
> that feature is omitted.
> 
> The TI_PWMSS kernel option is selected in Kconfig to enable the parent
> bus, which is needed for power management.
> 
> Signed-off-by: David Lechner <david@lechnology.com>

Hi David,

A few questions from me around runtime pm and interaction with the
userspace interface.

> ---
> 
> v2 changes:
> - Dropped unused index and strobe signals
> - Added synapses and actions
> - Fixed base in of kstrtouint()
> - Clarifications in commit message
> 
>  MAINTAINERS               |   6 +
>  drivers/bus/Kconfig       |   2 +-
>  drivers/counter/Kconfig   |  12 +
>  drivers/counter/Makefile  |   1 +
>  drivers/counter/ti-eqep.c | 460 ++++++++++++++++++++++++++++++++++++++
>  5 files changed, 480 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/counter/ti-eqep.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 783569e3c4b4..53c28d52964c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16014,6 +16014,12 @@ S:	Maintained
>  F:	drivers/media/platform/davinci/
>  F:	include/media/davinci/
>  
> +TI ENHANCED QUADRATURE ENCODER PULSE (eQEP) DRIVER
> +R:	David Lechner <david@lechnology.com>
> +L:	linux-iio@vger.kernel.org
> +F:	Documentation/devicetree/bindings/counter/ti-eqep.yaml
> +F:	drivers/counter/ti-eqep.c
> +
>  TI ETHERNET SWITCH DRIVER (CPSW)
>  R:	Grygorii Strashko <grygorii.strashko@ti.com>
>  L:	linux-omap@vger.kernel.org
> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> index 4eeb15839ce0..04db7fce4604 100644
> --- a/drivers/bus/Kconfig
> +++ b/drivers/bus/Kconfig
> @@ -142,7 +142,7 @@ config TEGRA_GMI
>  
>  config  TI_PWMSS
>  	bool
> -	default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM)
> +	default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM || TI_EQEP)
>  	help
>  	  PWM Subsystem driver support for AM33xx SOC.
>  
> diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
> index 2967d0a9ff91..7eeb310f0cda 100644
> --- a/drivers/counter/Kconfig
> +++ b/drivers/counter/Kconfig
> @@ -49,6 +49,18 @@ config STM32_LPTIMER_CNT
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called stm32-lptimer-cnt.
>  
> +config TI_EQEP
> +	tristate "TI eQEP counter driver"
> +	depends on (SOC_AM33XX || COMPILE_TEST)
> +	select PWM
> +	select REGMAP_MMIO
> +	help
> +	  Select this option to enable the Texas Instruments Enhanced Quadrature
> +	  Encoder Pulse (eQEP) counter driver.
> +
> +	  To compile this driver as a module, choose M here: the module will be
> +	  called ti-eqep.
> +
>  config FTM_QUADDEC
>  	tristate "Flex Timer Module Quadrature decoder driver"
>  	depends on HAS_IOMEM && OF
> diff --git a/drivers/counter/Makefile b/drivers/counter/Makefile
> index 40d35522937d..55142d1f4c43 100644
> --- a/drivers/counter/Makefile
> +++ b/drivers/counter/Makefile
> @@ -8,4 +8,5 @@ obj-$(CONFIG_COUNTER) += counter.o
>  obj-$(CONFIG_104_QUAD_8)	+= 104-quad-8.o
>  obj-$(CONFIG_STM32_TIMER_CNT)	+= stm32-timer-cnt.o
>  obj-$(CONFIG_STM32_LPTIMER_CNT)	+= stm32-lptimer-cnt.o
> +obj-$(CONFIG_TI_EQEP)		+= ti-eqep.o
>  obj-$(CONFIG_FTM_QUADDEC)	+= ftm-quaddec.o
> diff --git a/drivers/counter/ti-eqep.c b/drivers/counter/ti-eqep.c
> new file mode 100644
> index 000000000000..a761b868c12b
> --- /dev/null
> +++ b/drivers/counter/ti-eqep.c
> @@ -0,0 +1,460 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2019 David Lechner <david@lechnology.com>
> + *
> + * Counter driver for Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP)
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/counter.h>
> +#include <linux/kernel.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +
> +/* 32-bit registers */
> +#define QPOSCNT		0x0
> +#define QPOSINIT	0x4
> +#define QPOSMAX		0x8
> +#define QPOSCMP		0xc
> +#define QPOSILAT	0x10
> +#define QPOSSLAT	0x14
> +#define QPOSLAT		0x18
> +#define QUTMR		0x1c
> +#define QUPRD		0x20
> +
> +/* 16-bit registers */
> +#define QWDTMR		0x0	/* 0x24 */
> +#define QWDPRD		0x2	/* 0x26 */
> +#define QDECCTL		0x4	/* 0x28 */
> +#define QEPCTL		0x6	/* 0x2a */
> +#define QCAPCTL		0x8	/* 0x2c */
> +#define QPOSCTL		0xa	/* 0x2e */
> +#define QEINT		0xc	/* 0x30 */
> +#define QFLG		0xe	/* 0x32 */
> +#define QCLR		0x10	/* 0x34 */
> +#define QFRC		0x12	/* 0x36 */
> +#define QEPSTS		0x14	/* 0x38 */
> +#define QCTMR		0x16	/* 0x3a */
> +#define QCPRD		0x18	/* 0x3c */
> +#define QCTMRLAT	0x1a	/* 0x3e */
> +#define QCPRDLAT	0x1c	/* 0x40 */
> +
> +#define QDECCTL_QSRC_SHIFT	14
> +#define QDECCTL_QSRC		GENMASK(15, 14)
> +#define QDECCTL_SOEN		BIT(13)
> +#define QDECCTL_SPSEL		BIT(12)
> +#define QDECCTL_XCR		BIT(11)
> +#define QDECCTL_SWAP		BIT(10)
> +#define QDECCTL_IGATE		BIT(9)
> +#define QDECCTL_QAP		BIT(8)
> +#define QDECCTL_QBP		BIT(7)
> +#define QDECCTL_QIP		BIT(6)
> +#define QDECCTL_QSP		BIT(5)
> +
> +#define QEPCTL_FREE_SOFT	GENMASK(15, 14)
> +#define QEPCTL_PCRM		GENMASK(13, 12)
> +#define QEPCTL_SEI		GENMASK(11, 10)
> +#define QEPCTL_IEI		GENMASK(9, 8)
> +#define QEPCTL_SWI		BIT(7)
> +#define QEPCTL_SEL		BIT(6)
> +#define QEPCTL_IEL		GENMASK(5, 4)
> +#define QEPCTL_PHEN		BIT(3)
> +#define QEPCTL_QCLM		BIT(2)
> +#define QEPCTL_UTE		BIT(1)
> +#define QEPCTL_WDE		BIT(0)
> +
> +/* EQEP Inputs */
> +enum {
> +	TI_EQEP_SIGNAL_QEPA,	/* QEPA/XCLK */
> +	TI_EQEP_SIGNAL_QEPB,	/* QEPB/XDIR */
> +};
> +
> +/* Position Counter Input Modes */
> +enum {
> +	TI_EQEP_COUNT_FUNC_QUAD_COUNT,
> +	TI_EQEP_COUNT_FUNC_DIR_COUNT,
> +	TI_EQEP_COUNT_FUNC_UP_COUNT,
> +	TI_EQEP_COUNT_FUNC_DOWN_COUNT,
> +};
> +
> +enum {
> +	TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES,
> +	TI_EQEP_SYNAPSE_ACTION_RISING_EDGE,
> +	TI_EQEP_SYNAPSE_ACTION_NONE,
> +};
> +
> +struct ti_eqep_cnt {
> +	struct counter_device counter;
> +	struct regmap *regmap32;
> +	struct regmap *regmap16;
> +};
> +
> +static int ti_eqep_count_read(struct counter_device *counter,
> +			      struct counter_count *count,
> +			      struct counter_count_read_value *val)
> +{
> +	struct ti_eqep_cnt *priv = counter->priv;
> +	u32 cnt;
> +
> +	regmap_read(priv->regmap32, QPOSCNT, &cnt);
> +	counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &cnt);
> +
> +	return 0;
> +}
> +
> +static int ti_eqep_count_write(struct counter_device *counter,
> +			       struct counter_count *count,
> +			       struct counter_count_write_value *val)
> +{
> +	struct ti_eqep_cnt *priv = counter->priv;
> +	u32 cnt, max;
> +	int err;
> +
> +	err = counter_count_write_value_get(&cnt, COUNTER_COUNT_POSITION, val);
> +	if (err)
> +		return err;
> +
> +	regmap_read(priv->regmap32, QPOSMAX, &max);
> +	if (cnt > max)
> +		return -EINVAL;
> +
> +	return regmap_write(priv->regmap32, QPOSCNT, cnt);
> +}
> +
> +static int ti_eqep_function_get(struct counter_device *counter,
> +				struct counter_count *count, size_t *function)
> +{
> +	struct ti_eqep_cnt *priv = counter->priv;
> +	u32 qdecctl;
> +
> +	regmap_read(priv->regmap16, QDECCTL, &qdecctl);
> +	*function = (qdecctl & QDECCTL_QSRC) >> QDECCTL_QSRC_SHIFT;
> +
> +	return 0;
> +}
> +
> +static int ti_eqep_function_set(struct counter_device *counter,
> +				struct counter_count *count, size_t function)
> +{
> +	struct ti_eqep_cnt *priv = counter->priv;
> +
> +	return regmap_write_bits(priv->regmap16, QDECCTL, QDECCTL_QSRC,
> +				 function << QDECCTL_QSRC_SHIFT);
> +}
> +
> +static int ti_eqep_action_get(struct counter_device *counter,
> +			      struct counter_count *count,
> +			      struct counter_synapse *synapse, size_t *action)
> +{
> +	struct ti_eqep_cnt *priv = counter->priv;
> +	size_t function;
> +	u32 qdecctl;
> +	int err;
> +
> +	err = ti_eqep_function_get(counter, count, &function);
> +	if (err)
> +		return err;
> +
> +	switch (function) {
> +	case TI_EQEP_COUNT_FUNC_QUAD_COUNT:
> +		/* In quadrature mode, the rising and falling edge of both
> +		 * QEPA and QEPB trigger QCLK.
> +		 */
> +		*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
> +		break;
> +	case TI_EQEP_COUNT_FUNC_DIR_COUNT:
> +		/* In direction-count mode only rising edge of QEPA is counted
> +		 * and QEPB gives direction.
> +		 */
> +		switch (synapse->signal->id) {
> +		case TI_EQEP_SIGNAL_QEPA:
> +			*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
> +			break;
> +		default:
> +			*action = TI_EQEP_SYNAPSE_ACTION_NONE;
> +			break;
> +		}
> +		break;
> +	case TI_EQEP_COUNT_FUNC_UP_COUNT:
> +	case TI_EQEP_COUNT_FUNC_DOWN_COUNT:
> +		/* In up/down-count modes only QEPA is counted and QEPB is not
> +		 * used.
> +		 */
> +		switch (synapse->signal->id) {
> +		case TI_EQEP_SIGNAL_QEPA:
> +			err = regmap_read(priv->regmap16, QDECCTL, &qdecctl);
> +			if (err)
> +				return err;
> +
> +			if (qdecctl & QDECCTL_XCR)
> +				*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
> +			else
> +				*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
> +			break;
> +		default:
> +			*action = TI_EQEP_SYNAPSE_ACTION_NONE;
> +			break;
> +		}
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct counter_ops ti_eqep_counter_ops = {
> +	.count_read	= ti_eqep_count_read,
> +	.count_write	= ti_eqep_count_write,
> +	.function_get	= ti_eqep_function_get,
> +	.function_set	= ti_eqep_function_set,
> +	.action_get	= ti_eqep_action_get,
> +};
> +
> +static ssize_t ti_eqep_position_ceiling_read(struct counter_device *counter,
> +					     struct counter_count *count,
> +					     void *ext_priv, char *buf)
> +{
> +	struct ti_eqep_cnt *priv = counter->priv;
> +	u32 qposmax;
> +
> +	regmap_read(priv->regmap32, QPOSMAX, &qposmax);
> +
> +	return sprintf(buf, "%u\n", qposmax);
> +}
> +
> +static ssize_t ti_eqep_position_ceiling_write(struct counter_device *counter,
> +					      struct counter_count *count,
> +					      void *ext_priv, const char *buf,
> +					      size_t len)
> +{
> +	struct ti_eqep_cnt *priv = counter->priv;
> +	int err;
> +	u32 res;
> +
> +	err = kstrtouint(buf, 0, &res);
> +	if (err < 0)
> +		return err;
> +
> +	regmap_write(priv->regmap32, QPOSMAX, res);
> +
> +	return len;
> +}
> +
> +static ssize_t ti_eqep_position_floor_read(struct counter_device *counter,
> +					   struct counter_count *count,
> +					   void *ext_priv, char *buf)
> +{
> +	struct ti_eqep_cnt *priv = counter->priv;
> +	u32 qposinit;
> +
> +	regmap_read(priv->regmap32, QPOSINIT, &qposinit);
> +
> +	return sprintf(buf, "%u\n", qposinit);
> +}
> +
> +static ssize_t ti_eqep_position_floor_write(struct counter_device *counter,
> +					    struct counter_count *count,
> +					    void *ext_priv, const char *buf,
> +					    size_t len)
> +{
> +	struct ti_eqep_cnt *priv = counter->priv;
> +	int err;
> +	u32 res;
> +
> +	err = kstrtouint(buf, 0, &res);
> +	if (err < 0)
> +		return err;
> +
> +	regmap_write(priv->regmap32, QPOSINIT, res);
> +
> +	return len;
> +}
> +
> +static ssize_t ti_eqep_position_enable_read(struct counter_device *counter,
> +					    struct counter_count *count,
> +					    void *ext_priv, char *buf)
> +{
> +	struct ti_eqep_cnt *priv = counter->priv;
> +	u32 qepctl;
> +
> +	regmap_read(priv->regmap16, QEPCTL, &qepctl);
> +
> +	return sprintf(buf, "%u\n", !!(qepctl & QEPCTL_PHEN));
> +}
> +
> +static ssize_t ti_eqep_position_enable_write(struct counter_device *counter,
> +					     struct counter_count *count,
> +					     void *ext_priv, const char *buf,
> +					     size_t len)
> +{
> +	struct ti_eqep_cnt *priv = counter->priv;
> +	int err;
> +	bool res;
> +
> +	err = kstrtobool(buf, &res);
> +	if (err < 0)
> +		return err;
> +
> +	regmap_write_bits(priv->regmap16, QEPCTL, QEPCTL_PHEN, res ? -1 : 0);
> +
> +	return len;
> +}
> +
> +static struct counter_count_ext ti_eqep_position_ext[] = {
> +	{
> +		.name	= "ceiling",
> +		.read	= ti_eqep_position_ceiling_read,
> +		.write	= ti_eqep_position_ceiling_write,
> +	},
> +	{
> +		.name	= "floor",
> +		.read	= ti_eqep_position_floor_read,
> +		.write	= ti_eqep_position_floor_write,
> +	},
> +	{
> +		.name	= "enable",
> +		.read	= ti_eqep_position_enable_read,
> +		.write	= ti_eqep_position_enable_write,
> +	},
> +};
> +
> +static struct counter_signal ti_eqep_signals[] = {
> +	[TI_EQEP_SIGNAL_QEPA] = {
> +		.id = TI_EQEP_SIGNAL_QEPA,
> +		.name = "QEPA"
> +	},
> +	[TI_EQEP_SIGNAL_QEPB] = {
> +		.id = TI_EQEP_SIGNAL_QEPB,
> +		.name = "QEPB"
> +	},
> +};
> +
> +static const enum counter_count_function ti_eqep_position_functions[] = {
> +	[TI_EQEP_COUNT_FUNC_QUAD_COUNT]	= COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
> +	[TI_EQEP_COUNT_FUNC_DIR_COUNT]	= COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
> +	[TI_EQEP_COUNT_FUNC_UP_COUNT]	= COUNTER_COUNT_FUNCTION_INCREASE,
> +	[TI_EQEP_COUNT_FUNC_DOWN_COUNT]	= COUNTER_COUNT_FUNCTION_DECREASE,
> +};
> +
> +static const enum counter_synapse_action ti_eqep_position_synapse_actions[] = {
> +	[TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES]	= COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
> +	[TI_EQEP_SYNAPSE_ACTION_RISING_EDGE]	= COUNTER_SYNAPSE_ACTION_RISING_EDGE,
> +	[TI_EQEP_SYNAPSE_ACTION_NONE]		= COUNTER_SYNAPSE_ACTION_NONE,
> +};
> +
> +static struct counter_synapse ti_eqep_position_synapses[] = {
> +	{
> +		.action		= TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES,
> +		.actions_list	= ti_eqep_position_synapse_actions,
> +		.num_actions	= ARRAY_SIZE(ti_eqep_position_synapse_actions),
> +		.signal		= &ti_eqep_signals[TI_EQEP_SIGNAL_QEPA],
> +	},
> +	{
> +		.action		= TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES,
> +		.actions_list	= ti_eqep_position_synapse_actions,
> +		.num_actions	= ARRAY_SIZE(ti_eqep_position_synapse_actions),
> +		.signal		= &ti_eqep_signals[TI_EQEP_SIGNAL_QEPB],
> +	},
> +};
> +
> +static struct counter_count ti_eqep_counts[] = {
> +	{
> +		.id		= 0,
> +		.name		= "QPOSCNT",
> +		.functions_list	= ti_eqep_position_functions,
> +		.num_functions	= ARRAY_SIZE(ti_eqep_position_functions),
> +		.synapses	= ti_eqep_position_synapses,
> +		.num_synapses	= ARRAY_SIZE(ti_eqep_position_synapses),
> +		.ext		= ti_eqep_position_ext,
> +		.num_ext	= ARRAY_SIZE(ti_eqep_position_ext),
> +	},
> +};
> +
> +static const struct regmap_config ti_eqep_regmap32_config = {
> +	.name = "32-bit",
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +	.max_register = 0x24,
> +};
> +
> +static const struct regmap_config ti_eqep_regmap16_config = {
> +	.name = "16-bit",
> +	.reg_bits = 16,
> +	.val_bits = 16,
> +	.reg_stride = 2,
> +	.max_register = 0x1e,
> +};
> +
> +static int ti_eqep_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct ti_eqep_cnt *priv;
> +	struct resource *res;
> +	void __iomem *base;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
> +	priv->regmap32 = devm_regmap_init_mmio(dev, base,
> +					       &ti_eqep_regmap32_config);
> +	if (IS_ERR(priv->regmap32))
> +		return PTR_ERR(priv->regmap32);
> +
> +	priv->regmap16 = devm_regmap_init_mmio(dev, base + 0x24,
> +					       &ti_eqep_regmap16_config);
> +	if (IS_ERR(priv->regmap16))
> +		return PTR_ERR(priv->regmap16);
> +
> +	priv->counter.name = dev_name(dev);
> +	priv->counter.parent = dev;
> +	priv->counter.ops = &ti_eqep_counter_ops;
> +	priv->counter.counts = ti_eqep_counts;
> +	priv->counter.num_counts = ARRAY_SIZE(ti_eqep_counts);
> +	priv->counter.signals = ti_eqep_signals;
> +	priv->counter.num_signals = ARRAY_SIZE(ti_eqep_signals);
> +	priv->counter.priv = priv;
> +
> +	pm_runtime_enable(dev);
> +	pm_runtime_get(dev);
I'm a little confused on the flow here.

pm_runtime_enable turns on runtime pm in general.

pm_runtime_get basically calls runtime_resume to ensrue the
device has power.

> +
> +	return devm_counter_register(dev, &priv->counter);

This registers the userspace interfaces and exposes the device.

> +}
> +
> +static int ti_eqep_remove(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +
> +	pm_runtime_put(dev),
> +	pm_runtime_disable(dev);

pm_runtime_put notifies the system that the device is idle
(and hence potentially turns it off).

Not good if the counter is still registered.

I'm assuming the presence of runtime pm at all is to interact
with a parent driver and hence stop that turning off if this
driver is probed?  That's probably fine, but add a few comments
to make it clear that this driver itself doesn't really do
runtime pm at all.

Thanks,

J
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id ti_eqep_of_match[] = {
> +	{ .compatible = "ti,am3352-eqep", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, ti_eqep_of_match);
> +
> +static struct platform_driver ti_eqep_driver = {
> +	.probe = ti_eqep_probe,
> +	.remove = ti_eqep_remove,
> +	.driver = {
> +		.name = "ti-eqep-cnt",
> +		.of_match_table = ti_eqep_of_match,
> +	},
> +};
> +module_platform_driver(ti_eqep_driver);
> +
> +MODULE_AUTHOR("David Lechner <david@lechnology.com>");
> +MODULE_DESCRIPTION("TI eQEP counter driver");
> +MODULE_LICENSE("GPL v2");


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 3/5] counter: new TI eQEP driver
  2019-08-11  9:23   ` Jonathan Cameron
@ 2019-08-11 19:15     ` David Lechner
  0 siblings, 0 replies; 11+ messages in thread
From: David Lechner @ 2019-08-11 19:15 UTC (permalink / raw)
  To: Jonathan Cameron, linux-omap
  Cc: linux-iio, Rob Herring, Mark Rutland, Benoît Cousson,
	Tony Lindgren, William Breathitt Gray, Thierry Reding,
	devicetree, linux-kernel, linux-pwm

On 8/11/19 4:23 AM, Jonathan Cameron wrote:
> On Wed,  7 Aug 2019 14:40:21 -0500
> David Lechner <david@lechnology.com> wrote:
>> +
>> +	pm_runtime_enable(dev);
>> +	pm_runtime_get(dev);
> I'm a little confused on the flow here.
> 
> pm_runtime_enable turns on runtime pm in general.
> 
> pm_runtime_get basically calls runtime_resume to ensrue the
> device has power.
> 
>> +
>> +	return devm_counter_register(dev, &priv->counter);
> 
> This registers the userspace interfaces and exposes the device.
> 
>> +}
>> +
>> +static int ti_eqep_remove(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +
>> +	pm_runtime_put(dev),
>> +	pm_runtime_disable(dev);
> 
> pm_runtime_put notifies the system that the device is idle
> (and hence potentially turns it off).
> 
> Not good if the counter is still registered.
> 
> I'm assuming the presence of runtime pm at all is to interact
> with a parent driver and hence stop that turning off if this
> driver is probed?  That's probably fine, but add a few comments
> to make it clear that this driver itself doesn't really do
> runtime pm at all.
> 

To be honest, despite reading the runtime PM docs more than once,
I still don't feel like I have a good grasp on how it is supposed
to work. I just know that we get a crash if it is omitted because
the IP block is not powered on.

I will fix the ordering in _remove() and add a comment in v3.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 3/5] counter: new TI eQEP driver
  2019-08-07 19:40 ` [PATCH v2 3/5] counter: new TI eQEP driver David Lechner
  2019-08-07 19:49   ` David Lechner
  2019-08-11  9:23   ` Jonathan Cameron
@ 2019-08-15 12:37   ` William Breathitt Gray
  2 siblings, 0 replies; 11+ messages in thread
From: William Breathitt Gray @ 2019-08-15 12:37 UTC (permalink / raw)
  To: David Lechner
  Cc: linux-iio, linux-omap, Rob Herring, Mark Rutland,
	Benoît Cousson, Tony Lindgren, Thierry Reding, devicetree,
	linux-kernel, linux-pwm, Jonathan Cameron

On Wed, Aug 07, 2019 at 02:40:21PM -0500, David Lechner wrote:
> +static struct counter_synapse ti_eqep_position_synapses[] = {
> +	{
> +		.action		= TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES,
> +		.actions_list	= ti_eqep_position_synapse_actions,
> +		.num_actions	= ARRAY_SIZE(ti_eqep_position_synapse_actions),
> +		.signal		= &ti_eqep_signals[TI_EQEP_SIGNAL_QEPA],
> +	},
> +	{
> +		.action		= TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES,
> +		.actions_list	= ti_eqep_position_synapse_actions,
> +		.num_actions	= ARRAY_SIZE(ti_eqep_position_synapse_actions),
> +		.signal		= &ti_eqep_signals[TI_EQEP_SIGNAL_QEPB],
> +	},
> +};

Hi David,

Just a minor suggestion for your v3: you don't need to initialize
"action" here since it'll be automatically updated in the core
counter_action_show function to the value returned by your action_get
callback function. So you can safely delete those two ".action =" lines.

William Breathitt Gray

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 2/5] dt-bindings: counter: new bindings for TI eQEP
  2019-08-07 19:40 ` [PATCH v2 2/5] dt-bindings: counter: new bindings for TI eQEP David Lechner
@ 2019-08-21 20:31   ` Rob Herring
  0 siblings, 0 replies; 11+ messages in thread
From: Rob Herring @ 2019-08-21 20:31 UTC (permalink / raw)
  To: David Lechner
  Cc: linux-iio, linux-omap, Mark Rutland, Benoît Cousson,
	Tony Lindgren, William Breathitt Gray, Thierry Reding,
	devicetree, linux-kernel, linux-pwm

On Wed, Aug 07, 2019 at 02:40:20PM -0500, David Lechner wrote:
> This documents device tree binding for the Texas Instruments Enhanced
> Quadrature Encoder Pulse (eQEP) Module found in various TI SoCs.
> 
> Signed-off-by: David Lechner <david@lechnology.com>
> ---
> 
> v2 changes:
> - convert to .yaml format
> - rename clock to "sysclkout"
> 
>  .../devicetree/bindings/counter/ti-eqep.yaml  | 50 +++++++++++++++++++
>  1 file changed, 50 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/counter/ti-eqep.yaml
> 
> diff --git a/Documentation/devicetree/bindings/counter/ti-eqep.yaml b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
> new file mode 100644
> index 000000000000..8f8b2e87e5c3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/counter/ti-eqep.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) Module
> +
> +maintainers:
> +  - David Lechner <david@lechnology.com>
> +
> +properties:
> +  compatible:
> +    const: "ti,am3352-eqep"

No need for quotes

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    description: The eQEP event interrupt

Don't really have to have a description when there is only 1 entry.

> +    maxItems: 1
> +
> +  clocks:
> +    description: The clock that determines the SYSCLKOUT rate for the eQEP
> +                 peripheral.

Same here. 2 spaces in from description is the normal indentation.

> +    maxItems: 1
> +
> +  clock-names:
> +    const: sysclkout
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    eqep0: eqep@180 {

counter@...

> +        compatible = "ti,am3352-eqep";
> +        reg = <0x180 0x80>;
> +        clocks = <&l4ls_gclk>;
> +        clock-names = "sysclkout";
> +        interrupts = <79>;
> +    };
> +
> +...
> -- 
> 2.17.1
> 

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-07 19:40 [PATCH v2 0/5] counter: new TI eQEP driver David Lechner
2019-08-07 19:40 ` [PATCH v2 1/5] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem David Lechner
2019-08-07 19:40 ` [PATCH v2 2/5] dt-bindings: counter: new bindings for TI eQEP David Lechner
2019-08-21 20:31   ` Rob Herring
2019-08-07 19:40 ` [PATCH v2 3/5] counter: new TI eQEP driver David Lechner
2019-08-07 19:49   ` David Lechner
2019-08-11  9:23   ` Jonathan Cameron
2019-08-11 19:15     ` David Lechner
2019-08-15 12:37   ` William Breathitt Gray
2019-08-07 19:40 ` [PATCH v2 4/5] ARM: dts: am33xx: Add nodes for eQEP David Lechner
2019-08-07 19:40 ` [PATCH v2 5/5] ARM: dts: am335x-boneblue: Enable eQEP David Lechner

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git