Re: [PATCH v2 2/2] Driver for TI HDC20x0 humidity and temperature sensors

[Eugene Zalkonnikov <ez@norphonic.com>]

The previous was mis-formatted, sorry for that.

Signed-off-by: Eugene Zaikonnikov <eugene.zaikonnikov@norphonic.com>

diff -uprN linux-5.3.8/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 linux-5.3.8_docs/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010
--- linux-5.3.8/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010	1970-01-01 01:00:00.000000000 +0100
+++ linux-5.3.8_docs/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010	2019-12-02 11:09:25.803326999 +0100
@@ -0,0 +1,9 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_current_heater_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available
+KernelVersion:	5.3.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Controls the heater device within the humidity sensor to get
+		rid of excess condensation.
+
+		Valid control values are 0 = OFF, and 1 = ON.
diff -uprN linux-5.3.8/Documentation/devicetree/bindings/iio/humidity/hdc2010.yaml linux-5.3.8_docs/Documentation/devicetree/bindings/iio/humidity/hdc2010.yaml
--- linux-5.3.8/Documentation/devicetree/bindings/iio/humidity/hdc2010.yaml	1970-01-01 01:00:00.000000000 +0100
+++ linux-5.3.8_docs/Documentation/devicetree/bindings/iio/humidity/hdc2010.yaml	2019-12-02 08:43:32.508277082 +0100
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/hdc2010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDC2010/HDC2080 humidity and temperature iio sensors
+
+maintainers:
+  - Eugene Zaikonnikov <eugene.zaikonnikov@norophonic.com>
+
+description: |
+  Relative humidity and tempereature sensors on I2C bus
+
+  Datasheets are available at:
+    http://www.ti.com/product/HDC2010/datasheet
+    http://www.ti.com/product/HDC2080/datasheet
+
+properties:
+  compatible:
+    enum:
+      - ti,hdc2010
+      - ti,hdc2080
+
+  interrupts:
+    description:
+      interrupt mapping for IRQ
+    maxItems: 1
+
+required:
+  - compatible
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdc200x@40 {
+          compatible = "ti,hdc2010";
+          reg = <0x40>;
+      };
+    };