Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
[PATCH] iio: adc: meson_saradc: Fix memory allocation order
 2019-09-02 20:40 UTC  (3+ messages) - mbox.gz / Atom

[PATCH 1/2] dt-bindings: iio: accel: add binding documentation for ADIS16240
 2019-09-02 17:14 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH 2/2] staging: iio: accel: adis16240: move out of staging

[PATCH v3 0/6] counter: new TI eQEP driver
 2019-09-02 15:02 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH v3 1/6] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
` [PATCH v3 2/6] dt-bindings: counter: new bindings for TI eQEP
` [PATCH v3 3/6] counter: new TI eQEP driver
` [PATCH v3 4/6] ARM: dts: am33xx: Add nodes for eQEP
` [PATCH v3 5/6] ARM: dts: am335x-boneblue: Enable eQEP

[PATCH v2] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
 2019-09-02 13:13 UTC  (3+ messages) - mbox.gz / Atom

[PATCH V4 1/4] iio: adc: ad7192: Add sysfs ABI documentation
 2019-09-02 13:08 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH V4 2/4] iio: adc: ad_sigma_delta: Export ad_sd_calibrate
` [PATCH V4 3/4] staging: iio: adc: ad7192: Add system calibration support
` [PATCH V4 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192

[RFC 1/9] dt-bindings: arm: samsung: Convert Samsung board/soc bindings to json-schema
 2019-09-02 12:47 UTC  (14+ messages) - mbox.gz / Atom
` [RFC 2/9] dt-bindings: arm: samsung: Document missing S5Pv210 boards bindings
` [RFC 3/9] dt-bindings: arm: samsung: Document missing Exynos7 "
` [RFC 4/9] dt-bindings: arm: samsung: Convert Exynos Chipid bindings to json-schema
` [RFC 5/9] dt-bindings: arm: samsung: Convert Exynos PMU "
` [RFC 6/9] dt-bindings: arm: samsung: Convert Exynos System Registers "
` [RFC 7/9] dt-bindings: rtc: s3c: Convert S3C/Exynos RTC "
` [RFC 8/9] dt-bindings: iio: adc: exynos: Convert Exynos ADC "
` [RFC 9/9] ARM: dts: exynos: Remove not accurate secondary ADC compatible

[PATCH] iio: light: bh1750: Move static keyword to the front of declaration
 2019-09-02 11:31 UTC  - mbox.gz / Atom

[PATCH v2 0/1] counter: cros_ec: Add sync sensor driver
 2019-09-02  9:40 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH v2 1/1] counter: cros_ec: Add synchronization sensor

[PATCH 0/8 v2] AB8500 GPADC MFD to IIO conversion
 2019-09-02  9:30 UTC  (12+ messages) - mbox.gz / Atom
` [PATCH 1/8 v2] power: supply: ab8500_btemp: convert to IIO ADC
` [PATCH 2/8 v2] power: supply: ab8500_charger: "
` [PATCH 3/8 v2] power: supply: ab8500_fg: "
` [PATCH 4/8 v2] hwmon: ab8500: "
` [PATCH 5/8 v2] mfd: ab8500: augment DT bindings
` [PATCH 6/8 v2] iio: adc: New driver for the AB8500 GPADC
` [PATCH 7/8 v2] mfd: Switch the AB8500 GPADC to IIO
` [PATCH 8/8 v2] ARM: dts: ux500: declare GPADC IIO ADC channels

[PATCH] counter: fix devm_platform_ioremap_resource.cocci warnings
 2019-09-01 23:00 UTC  (2+ messages) - mbox.gz / Atom

WARNING in __mark_chain_precision (2)
 2019-09-01 18:23 UTC  - mbox.gz / Atom

[PATCH] iio: light: cm36651: redundant assignment to variable ret
 2019-09-01 15:27 UTC  - mbox.gz / Atom

[PATCH] iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
 2019-09-01 14:50 UTC  (10+ messages) - mbox.gz / Atom
  ` [BUG] "
    ` [PATCH] Revert "iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1"

[PATCH] iio: imu: st_lsm6dsx: forbid 0 sensor sensitivity
 2019-08-31 11:18 UTC  - mbox.gz / Atom

[PATCH 0/2] iio: core: Add optional symbolic label to device attributes
 2019-08-31 10:19 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH 1/2] dt-binding: iio: Add optional label property
` [PATCH 2/2] iio: core: Add optional symbolic label to device attributes

read_raw endianess
 2019-08-29 18:45 UTC  (2+ messages) - mbox.gz / Atom

[PATCH 0/8] add magnetometer support for MPU925x
 2019-08-29 15:18 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH 1/8] iio: imu: inv_mpu6050: disable i2c mux for 925x under Kconfig
` [PATCH 2/8] iio: imu: inv_mpu6050: add header include protection macro
` [PATCH 3/8] iio: imu: inv_mpu6050: add defines for supporting 9-axis chips
` [PATCH 4/8] iio: imu: inv_mpu6050: fix objects syntax in Makefile
` [PATCH 5/8] iio: imu: inv_mpu6050: helpers for using i2c master on auxiliary bus
` [PATCH 6/8] iio: imu: inv_mpu6050: add magnetometer implementation for MPU925x
` [PATCH 7/8] iio: imu: inv_mpu6050: add magnetometer support inside mpu driver
` [PATCH 8/8] iio: imu: inv_mpu6050: add fifo support for magnetometer data

[PATCH v1 1/1] iio: fix center temperature of bmc150-accel-core
 2019-08-29  5:29 UTC  - mbox.gz / Atom

[PULL] Second set of new device support, cleanups etc for IIO in the 5.4 cycle
 2019-08-27 21:08 UTC  - mbox.gz / Atom

[PATCH] iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1
 2019-08-27 20:10 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2] iio: cros_ec: set calibscale for 3d MEMS to unit vector
 2019-08-27 20:06 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio: dac: ad5380: fix incorrect assignment to val
 2019-08-27 20:03 UTC  (4+ messages) - mbox.gz / Atom

[PATCH v5 0/4] iio: imu: st_lsm6dsx: Add support for LSM9DS1
 2019-08-27 19:59 UTC  (12+ messages) - mbox.gz / Atom
` [PATCH v5 1/4] iio: imu: st_lsm6dsx: introduce update_fifo function pointer
` [PATCH v5 2/4] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
` [PATCH v5 3/4] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
` [PATCH v5 4/4] dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings

[PATCH 0/4] iio: adc: ina2xx: Improve device identification
 2019-08-27  6:14 UTC  (12+ messages) - mbox.gz / Atom
` [PATCH 1/4] iio: adc: ina2xx: Define *device_node only once
` [PATCH 2/4] iio: adc: ina2xx: Setup better name then simple ina2xx
` [PATCH 4/4] iio: adc: ina2xx: Use label proper for device identification

Add ADE9000 driver to staging:iio:meter?
 2019-08-26  9:44 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] staging:iio:meter add driver for ADE9000
 2019-08-26  9:34 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo
 2019-08-26  8:58 UTC  (4+ messages) - mbox.gz / Atom

Linux Kernel: Bug in the bmc150 driver
 2019-08-26  8:22 UTC  - mbox.gz / Atom

[PATCH -next] iio: st_sensors: Fix build error
 2019-08-26  2:48 UTC  (3+ messages) - mbox.gz / Atom

[PATCH] iio: cros_ec: set calibscale for 3d MEMS to unit vector
 2019-08-25 18:12 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2] dt-bindings: iio: light: isl29501: Rename bindings documentation file
 2019-08-25 18:11 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section
 2019-08-25 18:09 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v4 0/3] iio: imu: st_lsm6dsx: Add support for LSM9DS1
 2019-08-25 17:34 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH v4 1/3] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
` [PATCH v4 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1

[PATCH v3 1/4] iio: adc: ad7606: Add support for AD7606B ADC
 2019-08-25 17:26 UTC  (8+ messages) - mbox.gz / Atom
` [PATCH v3 2/4] MAINTAINERS: Add Beniamin Bia for AD7606 driver
` [PATCH v3 3/4] dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
` [PATCH v3 4/4] dt-bindings: iio: adc: Add AD7606B ADC documentation

buffer read
 2019-08-23 20:51 UTC  (3+ messages) - mbox.gz / Atom

[PATCH] iio: potentiometer: max5432: update the non-volatile position
 2019-08-22  8:36 UTC  (6+ messages) - mbox.gz / Atom
` iio: Is storing output values to non volatile registers something we should do automatically or leave to userspace action. [was Re: [PATCH] iio: potentiometer: max5432: update the non-volatile position]

[PATCH v2 1/1] iio: core: Fix fractional format generation
 2019-08-22  6:06 UTC  - mbox.gz / Atom

[PATCH v2 0/5] counter: new TI eQEP driver
 2019-08-21 20:31 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH v2 2/5] dt-bindings: counter: new bindings for TI eQEP

[PATCH v2 1/4] iio: adc: ad7606: Add support for AD7606B ADC
 2019-08-21 20:25 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH v2 3/4] dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
` [PATCH v2 4/4] dt-bindings: iio: adc: Add AD7606B ADC documentation

[PATCH 1/1] iio: core: Fix fractional format generation
 2019-08-21 20:09 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio: adc: max9611: Fix temperature reading in probe
 2019-08-21 12:34 UTC  (4+ messages) - mbox.gz / Atom

[PATCH v2 1/6] iio: imu: st_lsm6dsx: move interrupt thread to core
 2019-08-21 11:11 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH v2 3/6] iio: imu: st_lsm6dsx: add motion events

read buffer
 2019-08-21  1:10 UTC  (2+ messages) - mbox.gz / Atom

[PATCH AUTOSEL 4.14 02/12] iio: adc: max9611: Fix temperature reading in probe
 2019-08-20 13:42 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 4.19 13/27] iio: adc: max9611: Fix temperature reading in probe
 2019-08-20 13:41 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 5.2 20/44] iio: adc: max9611: Fix temperature reading in probe
 2019-08-20 13:40 UTC  - mbox.gz / Atom

[PATCH] dt-bindings: iio: light: isl29501: Rename bindings documentation file
 2019-08-19 14:15 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio: imu: st_lsm6dsx: introduce update_fifo function pointer
 2019-08-19 11:33 UTC  (3+ messages) - mbox.gz / Atom

[PATCH 0/2] irq/irq_sim: try to improve the API
 2019-08-19  8:18 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH 1/2] irq/irq_sim: make the irq_sim structure opaque
` [PATCH 2/2] irq/irq_sim: use irq domain

[PATCH v1] iio: hid-sensor-attributes: Convert to use int_pow()
 2019-08-19  2:48 UTC  (5+ messages) - mbox.gz / Atom

[PATCH] iio: adc: sc27xx: Change to polling mode to read data
 2019-08-19  1:12 UTC  (9+ messages) - mbox.gz / Atom

[PATCH] tools: iio: add .gitignore
 2019-08-18 19:47 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2] iio: adc: max1027: Use device-managed APIs
 2019-08-18 19:18 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2] staging: iio: accel: adis16240: Improve readability on write_raw function
 2019-08-18 19:13 UTC  (3+ messages) - mbox.gz / Atom

[PATCH V3 1/4] staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency
 2019-08-18 19:07 UTC  (10+ messages) - mbox.gz / Atom
` [PATCH V3 2/4] iio: adc: ad_sigma_delta: Export ad_sd_calibrate
` [PATCH V3 3/4] staging: iio: adc: ad7192: Add system calibration support
` [PATCH V3 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192

[PATCH] staging: iio: adc: ad7192: Remove platform data
 2019-08-18 18:23 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio: imu: adis16460: fix variable signedness
 2019-08-18 17:54 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio: accel: kxcjk1013: Improve comments on KIOX010A and KIOX020A ACPI ids
 2019-08-18 17:51 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] iio: max5481: use devres for iio device registration
 2019-08-18 17:18 UTC  (2+ messages) - mbox.gz / Atom

[PATCH][iio-next] iio: light: noa1305: fix missing break in a switch statement
 2019-08-18 17:14 UTC  (2+ messages) - mbox.gz / Atom

[PATCH 00/14] iio: SPDX headers for core + non device driver parts
 2019-08-17 20:38 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH 13/14] iio: trig-loop: SPDX headers GPL-v2

page:   latest

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org linux-iio@archiver.kernel.org
	public-inbox-index linux-iio


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox