From: Rob Herring <robh+dt@kernel.org>
To: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: "open list:IIO SUBSYSTEM AND DRIVERS" <linux-iio@vger.kernel.org>,
devicetree@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: iio: accel: adxl345: switch to YAML bindings
Date: Thu, 16 May 2019 08:29:08 -0500 [thread overview]
Message-ID: <CAL_JsqJLEuCJWnD1G5iXdCNcJ+a_0zhoUH2a=4i6VBm8_B9r6w@mail.gmail.com> (raw)
In-Reply-To: <20190516121509.1441-1-alexandru.ardelean@analog.com>
On Thu, May 16, 2019 at 7:15 AM Alexandru Ardelean
<alexandru.ardelean@analog.com> wrote:
>
> The ADX345 supports both I2C & SPI bindings.
> This change switches from old text bindings, to YAML bindings, and also
> tries to make use of the recent multiple-examples support.
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> ---
> .../bindings/iio/accel/adi,adxl345.yaml | 74 +++++++++++++++++++
> .../devicetree/bindings/iio/accel/adxl345.txt | 39 ----------
> 2 files changed, 74 insertions(+), 39 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> delete mode 100644 Documentation/devicetree/bindings/iio/accel/adxl345.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> new file mode 100644
> index 000000000000..47cdfb3b8182
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> @@ -0,0 +1,74 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl345.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers
> +
> +maintainers:
> + - Michael Hennerich <michael.hennerich@analog.com>
> +
> +description: |
> + Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
> + both I2C & SPI interfaces.
> + http://www.analog.com/en/products/mems/accelerometers/adxl345.html
> + http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
> +
> +properties:
> + compatible:
> + enum:
> + - adi,adxl345
> + - adi,adxl375
> +
> + reg:
> + maxItems: 1
> +
> + spi-cpha: true
> +
> + spi-cpol: true
> +
> + interrupt-parent: true
You don't need to document interrupt-parent. It is implied. With that dropped,
Reviewed-by: Rob Herring <robh@kernel.org>
> +
> + interrupts:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Example for a I2C device node */
> + accelerometer@2a {
> + compatible = "adi,adxl345";
> + reg = <0x53>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + spi0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Example for a SPI device node */
> + accelerometer@0 {
> + compatible = "adi,adxl345";
> + reg = <0>;
> + spi-max-frequency = <5000000>;
> + spi-cpol;
> + spi-cpha;
> + interrupt-parent = <&gpio0>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/iio/accel/adxl345.txt b/Documentation/devicetree/bindings/iio/accel/adxl345.txt
> deleted file mode 100644
> index f9525f6e3d43..000000000000
> --- a/Documentation/devicetree/bindings/iio/accel/adxl345.txt
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers
> -
> -http://www.analog.com/en/products/mems/accelerometers/adxl345.html
> -http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
> -
> -Required properties:
> - - compatible : should be one of
> - "adi,adxl345"
> - "adi,adxl375"
> - - reg : the I2C address or SPI chip select number of the sensor
> -
> -Required properties for SPI bus usage:
> - - spi-max-frequency : set maximum clock frequency, must be 5000000
> - - spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3
> -
> -Optional properties:
> - - interrupts: interrupt mapping for IRQ as documented in
> - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> -
> -Example for a I2C device node:
> -
> - accelerometer@2a {
> - compatible = "adi,adxl345";
> - reg = <0x53>;
> - interrupt-parent = <&gpio1>;
> - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> -Example for a SPI device node:
> -
> - accelerometer@0 {
> - compatible = "adi,adxl345";
> - reg = <0>;
> - spi-max-frequency = <5000000>;
> - spi-cpol;
> - spi-cpha;
> - interrupt-parent = <&gpio1>;
> - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> - };
> --
> 2.17.1
>
next prev parent reply other threads:[~2019-05-16 13:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-16 12:15 [PATCH] dt-bindings: iio: accel: adxl345: switch to YAML bindings Alexandru Ardelean
2019-05-16 13:29 ` Rob Herring [this message]
2019-05-16 13:34 ` Ardelean, Alexandru
2019-05-16 13:36 ` [PATCH V2] " Alexandru Ardelean
2019-05-16 13:53 ` Rob Herring
2019-05-17 15:44 ` [PATCH][V3] " Alexandru Ardelean
2019-05-18 10:27 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAL_JsqJLEuCJWnD1G5iXdCNcJ+a_0zhoUH2a=4i6VBm8_B9r6w@mail.gmail.com' \
--to=robh+dt@kernel.org \
--cc=alexandru.ardelean@analog.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).