Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
From: Rob Herring <robh+dt@kernel.org>
To: Jonathan Cameron <jic23@kernel.org>
Cc: "open list:IIO SUBSYSTEM AND DRIVERS" <linux-iio@vger.kernel.org>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	Marek Vasut <marex@denx.de>
Subject: Re: [PATCH 08/29] dt-bindings:iio:pressure:hoperf,hp03 yaml conversion
Date: Mon, 12 Oct 2020 08:06:46 -0500
Message-ID: <CAL_JsqKT7G-E7Ao7AbRwm_J_MRRRqcChpn5xkJZrftTjJLUZtQ@mail.gmail.com> (raw)
In-Reply-To: <20201011170749.243680-9-jic23@kernel.org>

On Sun, Oct 11, 2020 at 12:10 PM Jonathan Cameron <jic23@kernel.org> wrote:
>
> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
> One quirk in the txt file was that the xclr gpio was specified as
> gpio-xclr rather than gpios-xclr. I've fixed that in the

xclr-gpios?, not gpios?-xclr

> yaml version.
>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Cc: Marek Vasut <marex@denx.de>
> ---
>  .../bindings/iio/pressure/hoperf,hp03.yaml    | 47 +++++++++++++++++++
>  .../devicetree/bindings/iio/pressure/hp03.txt | 17 -------
>  2 files changed, 47 insertions(+), 17 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml
> new file mode 100644
> index 000000000000..69a3759e23db
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml
> @@ -0,0 +1,47 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/pressure/hoperf,hp03.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HopeRF HP03 digital pressure/temperature sensors
> +
> +maintainers:
> +  - Marek Vasut <marex@denx.de>
> +
> +description: |
> +  Digital pressure and temperature sensor with an I2C interface.
> +
> +properties:
> +  compatible:
> +    const: hoperf,hp03
> +
> +  reg:
> +    maxItems: 1
> +
> +  xclr-gpios:
> +    description:
> +      The XCLR pin is a reset of the ADC in the chip, it must be pulled
> +      HI before the conversion and readout of the value from the ADC
> +      registers and pulled LO afterward.
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        pressure@77 {
> +            compatible = "hoperf,hp03";
> +            reg = <0x77>;
> +            xclr-gpios = <&portc 0 0x0>;
> +        };
> +    };
> +...
> diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt
> deleted file mode 100644
> index 831dbee7a5c3..000000000000
> --- a/Documentation/devicetree/bindings/iio/pressure/hp03.txt
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -HopeRF HP03 digital pressure/temperature sensors
> -
> -Required properties:
> -- compatible: must be "hoperf,hp03"
> -- xclr-gpio: must be device tree identifier of the XCLR pin.
> -             The XCLR pin is a reset of the ADC in the chip,
> -             it must be pulled HI before the conversion and
> -             readout of the value from the ADC registers and
> -             pulled LO afterward.
> -
> -Example:
> -
> -hp03@77 {
> -       compatible = "hoperf,hp03";
> -       reg = <0x77>;
> -       xclr-gpio = <&portc 0 0x0>;
> -};
> --
> 2.28.0
>

  reply index

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-11 17:07 [PATCH 00/29] dt-bindings:iio: Another set of yaml conversions Jonathan Cameron
2020-10-11 17:07 ` [PATCH 01/29] dt-bindings:iio:humidity:hdc100x Drop separate doc + add to trivial-devices Jonathan Cameron
2020-10-12 16:29   ` Matt Ranostay
2020-10-11 17:07 ` [PATCH 02/29] dt-bindings:iio:humidity:htu21 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 03/29] dt-bindings:iio:humidity:st,hts221 yaml conversion Jonathan Cameron
2020-10-11 17:07 ` [PATCH 04/29] dt-bindings:iio:humidity:dht11 " Jonathan Cameron
2020-10-11 17:52   ` Harald Geyer
2020-10-12 14:29     ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 05/29] dt-bindings:iio:pressure:ms5637 Drop separate doc + add to trivial-devices Jonathan Cameron
2020-10-11 17:07 ` [PATCH 06/29] dt-bindings:iio:pressure:murata,zpa2326 yaml conversion Jonathan Cameron
2020-10-11 17:07 ` [PATCH 07/29] dt-bindings:iio:pressure:meas,ms5611 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 08/29] dt-bindings:iio:pressure:hoperf,hp03 " Jonathan Cameron
2020-10-12 13:06   ` Rob Herring [this message]
2020-10-12 14:31     ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 09/29] dt-bindings:iio:proximity:semtech,sx9500 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 10/29] dt-bindings:iio:proximity:st,vl53l0x " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 11/29] dt-bindings:iio:proximity:ams,as3935 " Jonathan Cameron
2020-10-12 16:37   ` Matt Ranostay
2020-10-11 17:07 ` [PATCH 12/29] dt-bindings:iio:dac:ti,dac5571 " Jonathan Cameron
2020-10-11 17:47   ` Sean Nyekjaer
2020-10-18  9:58     ` Jonathan Cameron
2020-10-18 15:06       ` Sean Nyekjaer
2020-10-11 17:07 ` [PATCH 13/29] dt-bindings:iio:dac:ti,dac7311 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 14/29] dt-bindings:iio:dac:ti,dac7512 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 15/29] dt-bindings:iio:dac:ti,dac7612 " Jonathan Cameron
2020-10-15  8:49   ` Ricardo Ribalda Delgado
2020-10-18 17:41     ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 16/29] dt-bindings:iio:dac:ti,dac082s085 " Jonathan Cameron
2020-10-28 20:31   ` Lukas Wunner
2020-10-29 15:50     ` Jonathan Cameron
2020-10-29 19:10       ` Lukas Wunner
2020-10-31 11:02         ` Jonathan Cameron
2020-10-31 13:07       ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 17/29] dt-bindings:iio:dac:adi,ad7303 " Jonathan Cameron
2020-10-11 17:13   ` Lars-Peter Clausen
2020-10-18 17:43     ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 18/29] dt-bindings:iio:dac:maxim,ds4424 " Jonathan Cameron
2020-10-18 17:47   ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 19/29] dt-bindings:iio:dac:fsl,vf610-dac " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 20/29] dt-bindings:iio:dac:microchip,mcp4725 " Jonathan Cameron
2020-10-12 14:02   ` Tomas Novotny
2020-10-12 14:39     ` Jonathan Cameron
2020-10-14  8:57       ` Tomas Novotny
2020-10-11 17:07 ` [PATCH 21/29] dt-bindings:iio:dac:maxim,max5821 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 22/29] dt-bindings:iio:dac:nxp,lpc1850-dac " Jonathan Cameron
2020-10-18 17:52   ` Jonathan Cameron
2020-10-18 18:44   ` Vladimir Zapolskiy
2020-10-11 17:07 ` [PATCH 23/29] dt-bindings:iio:dac:adi,ad5758 " Jonathan Cameron
2020-10-11 17:07 ` [PATCH 24/29] dt-bindings:iio:temperature:melexis,mlx90614 " Jonathan Cameron
2020-10-11 21:00   ` Crt Mori
2020-10-12  8:00     ` Crt Mori
2020-10-12 14:25       ` Jonathan Cameron
2020-10-11 17:07 ` [PATCH 25/29] dt-bindings:iio:temperature:melexis,mlx90632 conversion to yaml Jonathan Cameron
2020-10-11 21:01   ` Crt Mori
2020-10-11 17:07 ` [PATCH 26/29] dt-bindings:iio:temperature:meas,tsys01 move to trivial-devices.yaml Jonathan Cameron
2020-10-11 17:07 ` [PATCH 27/29] dt-bindings:iio:temperature:maxim,max31856 yaml conversion Jonathan Cameron
2020-10-11 17:07 ` [PATCH 28/29] dt-bindings:iio:temperature:maxim_thermocouple.txt to maxim,max31855k.yaml Jonathan Cameron
2020-10-12 16:40   ` Matt Ranostay
2020-10-11 17:07 ` [PATCH 29/29] dt-bindings:iio:temperature:ti,tmp07 yaml conversion Jonathan Cameron
2020-10-13  8:22   ` Manivannan Sadhasivam
2020-10-12 13:20 ` [PATCH 00/29] dt-bindings:iio: Another set of yaml conversions Rob Herring
2020-10-12 14:33   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAL_JsqKT7G-E7Ao7AbRwm_J_MRRRqcChpn5xkJZrftTjJLUZtQ@mail.gmail.com \
    --to=robh+dt@kernel.org \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=marex@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git