Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v6 1/2] Driver for TI HDC20x0 humidity and temperature sensors 
@ 2020-03-17 20:06 Eugene Zalkonnikov
  2020-03-17 20:09 ` [PATCH v6 2/2] Device tree bindings " Eugene Zalkonnikov
  2020-03-22 16:17 ` [PATCH v6 1/2] Driver " Jonathan Cameron
  0 siblings, 2 replies; 7+ messages in thread
From: Eugene Zalkonnikov @ 2020-03-17 20:06 UTC (permalink / raw)
  To: Jonathan Cameron
  Cc: Hartmut Knaack, Lars-Peter Clausen, development, linux-iio

 HDC2010/2080 diver and sysfs documentation for its heater element.

Signed-off-by: Eugene Zaikonnikov <eugene.zaikonnikov@norphonic.com>

diff -uprN -X linux-5.3.8/Documentation/dontdiff linux-5.3.8/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 linux-5.3.8_hdc2010/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010
--- linux-5.3.8/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010	1970-01-01 01:00:00.000000000 +0100
+++ linux-5.3.8_hdc2010/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010	2019-12-02 11:09:25.803326999 +0100
@@ -0,0 +1,9 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_current_heater_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available
+KernelVersion:	5.3.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Controls the heater device within the humidity sensor to get
+		rid of excess condensation.
+
+		Valid control values are 0 = OFF, and 1 = ON.
diff -uprN -X linux-5.3.8/Documentation/dontdiff linux-5.3.8/drivers/iio/humidity/hdc2010.c linux-5.3.8_hdc2010/drivers/iio/humidity/hdc2010.c
--- linux-5.3.8/drivers/iio/humidity/hdc2010.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-5.3.8_hdc2010/drivers/iio/humidity/hdc2010.c	2020-03-06 09:51:49.844394670 +0100
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * hdc2010.c - Support for the TI HDC2010 and HDC2080
+ * temperature + relative humidity sensors
+ *
+ * Copyright (C) 2019 Norphonic AS
+ * Author: Eugene Zaikonnikov <eugene.zaikonnikov@norphonic.com>
+ *
+ * Datasheets:
+ * http://www.ti.com/product/HDC2010/datasheet
+ * http://www.ti.com/product/HDC2080/datasheet
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define HDC2010_REG_TEMP_LOW			0x00
+#define HDC2010_REG_TEMP_HIGH			0x01
+#define HDC2010_REG_HUMIDITY_LOW		0x02
+#define HDC2010_REG_HUMIDITY_HIGH		0x03
+#define HDC2010_REG_INTERRUPT_DRDY		0x04
+#define HDC2010_REG_TEMP_MAX			0x05
+#define HDC2010_REG_HUMIDITY_MAX		0x06
+#define HDC2010_REG_INTERRUPT_EN		0x07
+#define HDC2010_REG_TEMP_OFFSET_ADJ		0x08
+#define HDC2010_REG_HUMIDITY_OFFSET_ADJ		0x09
+#define HDC2010_REG_TEMP_THR_L			0x0a
+#define HDC2010_REG_TEMP_THR_H			0x0b
+#define HDC2010_REG_RH_THR_L			0x0c
+#define HDC2010_REG_RH_THR_H			0x0d
+#define HDC2010_REG_RESET_DRDY_INT_CONF		0x0e
+#define HDC2010_REG_MEASUREMENT_CONF		0x0f
+
+#define HDC2010_MEAS_CONF			GENMASK(2, 1)
+#define HDC2010_MEAS_TRIG			BIT(0)
+#define HDC2010_HEATER_EN			BIT(3)
+#define HDC2010_AMM				GENMASK(6, 4)
+
+struct hdc2010_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	u8 measurement_config;
+	u8 interrupt_config;
+	u8 drdy_config;
+};
+
+enum hdc2010_addr_groups {
+	HDC2010_GROUP_TEMP = 0,
+	HDC2010_GROUP_HUMIDITY
+};
+
+struct hdc2010_reg_record {
+	unsigned long primary;
+	unsigned long peak;
+};
+
+static const struct hdc2010_reg_record hdc2010_reg_translation[] = {
+	[HDC2010_GROUP_TEMP] = {
+		.primary = HDC2010_REG_TEMP_LOW,
+		.peak = HDC2010_REG_TEMP_MAX,
+	},
+	[HDC2010_GROUP_HUMIDITY] = {
+		.primary = HDC2010_REG_HUMIDITY_LOW,
+		.peak = HDC2010_REG_HUMIDITY_MAX,
+	},
+};
+
+static IIO_CONST_ATTR(out_current_heater_raw_available,
+		"0 1");
+
+static struct attribute *hdc2010_attributes[] = {
+	&iio_const_attr_out_current_heater_raw_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group hdc2010_attribute_group = {
+	.attrs = hdc2010_attributes,
+};
+
+static const struct iio_chan_spec hdc2010_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.address = HDC2010_GROUP_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_PEAK) |
+			BIT(IIO_CHAN_INFO_OFFSET) |
+			BIT(IIO_CHAN_INFO_SCALE),
+	},
+	{
+		.type = IIO_HUMIDITYRELATIVE,
+		.address = HDC2010_GROUP_HUMIDITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_PEAK) |
+			BIT(IIO_CHAN_INFO_SCALE),
+	},
+	{
+		.type = IIO_CURRENT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.extend_name = "heater",
+		.output = 1,
+	},
+};
+
+static int hdc2010_update_drdy_config(struct hdc2010_data *data,
+					     char mask, char val)
+{
+	char tmp = (~mask & data->drdy_config) | val;
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					HDC2010_REG_RESET_DRDY_INT_CONF, tmp);
+	if (!ret)
+		data->drdy_config = tmp;
+
+	return ret;
+}
+
+static int hdc2010_get_measurement_word(struct hdc2010_data *data,
+					struct iio_chan_spec const *chan)
+{
+	struct i2c_client *client = data->client;
+	s32 ret;
+
+	ret = i2c_smbus_read_word_data(client,
+			hdc2010_reg_translation[chan->address].primary);
+
+	if (ret < 0)
+		dev_err(&client->dev, "Could not read sensor data\n");
+
+	return ret;
+}
+
+static int hdc2010_get_measurement_byte(struct hdc2010_data *data,
+					struct iio_chan_spec const *chan)
+{
+	struct i2c_client *client = data->client;
+	s32 ret;
+
+	ret = i2c_smbus_read_byte_data(client,
+			hdc2010_reg_translation[chan->address].peak);
+
+	if (ret < 0)
+		dev_err(&client->dev, "Could not read sensor data\n");
+
+	return ret;
+}
+
+static int hdc2010_get_heater_status(struct hdc2010_data *data)
+{
+	return !!(data->drdy_config & HDC2010_HEATER_EN);
+}
+
+static int hdc2010_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan, int *val,
+			    int *val2, long mask)
+{
+	struct hdc2010_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW: {
+		int ret;
+
+		if (chan->type == IIO_CURRENT) {
+			*val = hdc2010_get_heater_status(data);
+			ret = IIO_VAL_INT;
+		} else {
+			ret = iio_device_claim_direct_mode(indio_dev);
+			if (ret)
+				return ret;
+			mutex_lock(&data->lock);
+			ret = hdc2010_get_measurement_word(data, chan);
+			mutex_unlock(&data->lock);
+			iio_device_release_direct_mode(indio_dev);
+			if (ret >= 0) {
+				*val = ret;
+				ret = IIO_VAL_INT;
+			}
+
+		}
+		return ret;
+	}
+	case IIO_CHAN_INFO_PEAK: {
+		int ret;
+
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		mutex_lock(&data->lock);
+		ret = hdc2010_get_measurement_byte(data, chan);
+		mutex_unlock(&data->lock);
+		iio_device_release_direct_mode(indio_dev);
+		if (ret >= 0) {
+		  /* Scaling up the value so we can use same offset as RAW */
+			*val = ret * 256;
+			ret = IIO_VAL_INT;
+		}
+
+		return ret;
+	}
+	case IIO_CHAN_INFO_SCALE:
+		*val2 = 65536;
+		if (chan->type == IIO_TEMP)
+			*val = 165000;
+		else
+			*val = 100000;
+		return IIO_VAL_FRACTIONAL;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = -15887;
+		*val2 = 515151;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int hdc2010_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct hdc2010_data *data = iio_priv(indio_dev);
+	int new, ret = -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (chan->type != IIO_CURRENT || val2 != 0)
+			return -EINVAL;
+
+		switch (val) {
+		case 1:
+			new = HDC2010_HEATER_EN;
+			break;
+		case 0:
+			new = 0;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		mutex_lock(&data->lock);
+		ret = hdc2010_update_drdy_config(data, HDC2010_HEATER_EN, new);
+		mutex_unlock(&data->lock);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info hdc2010_info = {
+	.read_raw = hdc2010_read_raw,
+	.write_raw = hdc2010_write_raw,
+	.attrs = &hdc2010_attribute_group,
+};
+
+static int hdc2010_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct hdc2010_data *data;
+	u8 tmp;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA |
+				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
+		return -EOPNOTSUPP;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = dev_name(&client->dev);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &hdc2010_info;
+
+	indio_dev->channels = hdc2010_channels;
+	indio_dev->num_channels = ARRAY_SIZE(hdc2010_channels);
+
+	/* Enable Automatic Measurement Mode at 5Hz */
+	hdc2010_update_drdy_config(data, HDC2010_AMM, HDC2010_AMM);
+
+	/*
+	 * We enable both temp and humidity measurement.
+	 * However the measurement won't start even in AMM until triggered.
+	 */
+	tmp = (u8)(data->measurement_config & ~HDC2010_MEAS_CONF) |
+		HDC2010_MEAS_TRIG;
+
+	ret = i2c_smbus_write_byte_data(client,
+					HDC2010_REG_MEASUREMENT_CONF, tmp);
+	if (ret)
+		return ret;
+	data->measurement_config = tmp;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id hdc2010_id[] = {
+	{ "hdc2010" },
+	{ "hdc2080" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, hdc2010_id);
+
+static const struct of_device_id hdc2010_dt_ids[] = {
+	{ .compatible = "ti,hdc2010" },
+	{ .compatible = "ti,hdc2080" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, hdc2010_dt_ids);
+
+static struct i2c_driver hdc2010_driver = {
+	.driver = {
+		.name	= "hdc2010",
+		.of_match_table = hdc2010_dt_ids,
+	},
+	.probe = hdc2010_probe,
+	.id_table = hdc2010_id,
+};
+module_i2c_driver(hdc2010_driver);
+
+MODULE_AUTHOR("Eugene Zaikonnikov <eugene.zaikonnikov@norphonic.com>");
+MODULE_DESCRIPTION("TI HDC2010 humidity and temperature sensor driver");
+MODULE_LICENSE("GPL");
diff -uprN -X linux-5.3.8/Documentation/dontdiff linux-5.3.8/drivers/iio/humidity/Kconfig linux-5.3.8_hdc2010/drivers/iio/humidity/Kconfig
--- linux-5.3.8/drivers/iio/humidity/Kconfig	2019-10-29 09:22:48.000000000 +0100
+++ linux-5.3.8_hdc2010/drivers/iio/humidity/Kconfig	2019-11-28 14:31:27.794242693 +0100
@@ -38,6 +38,16 @@ config HDC100X
 	  To compile this driver as a module, choose M here: the module
 	  will be called hdc100x.
 
+config HDC2010
+	tristate "TI HDC2010 relative humidity and temperature sensor"
+	depends on I2C
+	help
+	  Say yes here to build support for the Texas Instruments
+	  HDC2010 and HDC2080 relative humidity and temperature sensors.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called hdc2010.
+
 config HID_SENSOR_HUMIDITY
 	tristate "HID Environmental humidity sensor"
 	depends on HID_SENSOR_HUB
diff -uprN -X linux-5.3.8/Documentation/dontdiff linux-5.3.8/drivers/iio/humidity/Makefile linux-5.3.8_hdc2010/drivers/iio/humidity/Makefile
--- linux-5.3.8/drivers/iio/humidity/Makefile	2019-10-29 09:22:48.000000000 +0100
+++ linux-5.3.8_hdc2010/drivers/iio/humidity/Makefile	2019-11-28 14:30:40.609892061 +0100
@@ -6,6 +6,7 @@
 obj-$(CONFIG_AM2315) += am2315.o
 obj-$(CONFIG_DHT11) += dht11.o
 obj-$(CONFIG_HDC100X) += hdc100x.o
+obj-$(CONFIG_HDC2010) += hdc2010.o
 obj-$(CONFIG_HID_SENSOR_HUMIDITY) += hid-sensor-humidity.o
 
 hts221-y := hts221_core.o \


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v6 2/2] Device tree bindings for TI HDC20x0 humidity and temperature sensors 
  2020-03-17 20:06 [PATCH v6 1/2] Driver for TI HDC20x0 humidity and temperature sensors Eugene Zalkonnikov
@ 2020-03-17 20:09 ` " Eugene Zalkonnikov
  2020-03-18 22:59   ` Rob Herring
  2020-03-22 16:03   ` Jonathan Cameron
  2020-03-22 16:17 ` [PATCH v6 1/2] Driver " Jonathan Cameron
  1 sibling, 2 replies; 7+ messages in thread
From: Eugene Zalkonnikov @ 2020-03-17 20:09 UTC (permalink / raw)
  To: Jonathan Cameron
  Cc: Hartmut Knaack, Lars-Peter Clausen, development, linux-iio,
	Mark Rutland, devicetree

Device tree bindings for the HDC2010/2080 driver.

Signed-off-by: Eugene Zaikonnikov <eugene.zaikonnikov@norphonic.com>

diff -uprN linux-5.3.8/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml linux-5.3.8_docs/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
--- linux-5.3.8/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml	1970-01-01 01:00:00.000000000 +0100
+++ linux-5.3.8_docs/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml	2020-02-12 14:28:42.562903814 +0100
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/hdc2010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDC2010/HDC2080 humidity and temperature iio sensors
+
+maintainers:
+  - Eugene Zaikonnikov <eugene.zaikonnikov@norophonic.com>
+
+description: |
+  Relative humidity and tempereature sensors on I2C bus
+
+  Datasheets are available at:
+    http://www.ti.com/product/HDC2010/datasheet
+    http://www.ti.com/product/HDC2080/datasheet
+
+properties:
+  compatible:
+    enum:
+      - ti,hdc2010
+      - ti,hdc2080
+
+  vddd-supply:
+    description:
+      digital voltage regulator (see regulator/regulator.txt)
+    maxItems: 1
+
+required:
+  - compatible
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdc200x@40 {
+          compatible = "ti,hdc2010";
+          reg = <0x40>;
+      };
+    };


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v6 2/2] Device tree bindings for TI HDC20x0 humidity and temperature sensors
  2020-03-17 20:09 ` [PATCH v6 2/2] Device tree bindings " Eugene Zalkonnikov
@ 2020-03-18 22:59   ` Rob Herring
  2020-03-22 16:03   ` Jonathan Cameron
  1 sibling, 0 replies; 7+ messages in thread
From: Rob Herring @ 2020-03-18 22:59 UTC (permalink / raw)
  To: Eugene Zalkonnikov
  Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	development, linux-iio, Mark Rutland, devicetree

On Tue, 17 Mar 2020 20:09:48 +0000, Eugene Zalkonnikov wrote:
> 
> Device tree bindings for the HDC2010/2080 driver.
> 
> Signed-off-by: Eugene Zaikonnikov <eugene.zaikonnikov@norphonic.com>
> 
> diff -uprN linux-5.3.8/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml linux-5.3.8_docs/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
> --- linux-5.3.8/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml	1970-01-01 01:00:00.000000000 +0100
> +++ linux-5.3.8_docs/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml	2020-02-12 14:28:42.562903814 +0100
> @@ -0,0 +1,43 @@
> +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/humidity/hdc2010.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HDC2010/HDC2080 humidity and temperature iio sensors
> +
> +maintainers:
> +  - Eugene Zaikonnikov <eugene.zaikonnikov@norophonic.com>
> +
> +description: |
> +  Relative humidity and tempereature sensors on I2C bus
> +
> +  Datasheets are available at:
> +    http://www.ti.com/product/HDC2010/datasheet
> +    http://www.ti.com/product/HDC2080/datasheet
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,hdc2010
> +      - ti,hdc2080
> +
> +  vddd-supply:
> +    description:
> +      digital voltage regulator (see regulator/regulator.txt)
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +
> +examples:
> +  - |
> +    i2c0 {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      hdc200x@40 {
> +          compatible = "ti,hdc2010";
> +          reg = <0x40>;
> +      };
> +    };
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/iio/humidity/ti,hdc2010.yaml#

See https://patchwork.ozlabs.org/patch/1256878
Please check and re-submit.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v6 2/2] Device tree bindings for TI HDC20x0 humidity and temperature sensors
  2020-03-17 20:09 ` [PATCH v6 2/2] Device tree bindings " Eugene Zalkonnikov
  2020-03-18 22:59   ` Rob Herring
@ 2020-03-22 16:03   ` Jonathan Cameron
  1 sibling, 0 replies; 7+ messages in thread
From: Jonathan Cameron @ 2020-03-22 16:03 UTC (permalink / raw)
  To: Eugene Zalkonnikov
  Cc: Hartmut Knaack, Lars-Peter Clausen, development, linux-iio,
	Mark Rutland, devicetree

On Tue, 17 Mar 2020 20:09:48 +0000
Eugene Zalkonnikov <ez@norphonic.com> wrote:

> Device tree bindings for the HDC2010/2080 driver.
> 
> Signed-off-by: Eugene Zaikonnikov <eugene.zaikonnikov@norphonic.com>
Hi Eugene

A few minor things inline

Jonathan

> 
> diff -uprN linux-5.3.8/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml linux-5.3.8_docs/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
> --- linux-5.3.8/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml	1970-01-01 01:00:00.000000000 +0100
> +++ linux-5.3.8_docs/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml	2020-02-12 14:28:42.562903814 +0100
> @@ -0,0 +1,43 @@
> +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/humidity/hdc2010.yaml#

As Rob's bot pointed out... ti,hdc2010.yaml preferred.

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HDC2010/HDC2080 humidity and temperature iio sensors
> +
> +maintainers:
> +  - Eugene Zaikonnikov <eugene.zaikonnikov@norophonic.com>
> +
> +description: |
> +  Relative humidity and tempereature sensors on I2C bus
> +
> +  Datasheets are available at:
> +    http://www.ti.com/product/HDC2010/datasheet
> +    http://www.ti.com/product/HDC2080/datasheet
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,hdc2010
> +      - ti,hdc2080
> +
> +  vddd-supply:

ddd rather than dd?

> +    description:
> +      digital voltage regulator (see regulator/regulator.txt)

For main supply probably don't need to bother with description.

> +    maxItems: 1
> +
> +required:
> +  - compatible
> +
> +examples:
> +  - |
> +    i2c0 {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      hdc200x@40 {

Naming should be 'generic'. 
humidity@40 {

Is probably appropriate though not on the explicit list in the devicetree
spec yet.

> +          compatible = "ti,hdc2010";
> +          reg = <0x40>;
> +      };
> +    };
> 


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v6 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  2020-03-17 20:06 [PATCH v6 1/2] Driver for TI HDC20x0 humidity and temperature sensors Eugene Zalkonnikov
  2020-03-17 20:09 ` [PATCH v6 2/2] Device tree bindings " Eugene Zalkonnikov
@ 2020-03-22 16:17 ` " Jonathan Cameron
  2020-03-23 14:39   ` Eugene Zalkonnikov
  1 sibling, 1 reply; 7+ messages in thread
From: Jonathan Cameron @ 2020-03-22 16:17 UTC (permalink / raw)
  To: Eugene Zalkonnikov
  Cc: Hartmut Knaack, Lars-Peter Clausen, development, linux-iio

On Tue, 17 Mar 2020 20:06:01 +0000
Eugene Zalkonnikov <ez@norphonic.com> wrote:

>  HDC2010/2080 diver and sysfs documentation for its heater element.
> 
> Signed-off-by: Eugene Zaikonnikov <eugene.zaikonnikov@norphonic.com>
Hi Eugene

A few minor things inline.  Sorry I missed these on previous reviews!

Thanks,

Jonathan

> 
> diff -uprN -X linux-5.3.8/Documentation/dontdiff linux-5.3.8/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 linux-5.3.8_hdc2010/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010
> --- linux-5.3.8/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010	1970-01-01 01:00:00.000000000 +0100
> +++ linux-5.3.8_hdc2010/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010	2019-12-02 11:09:25.803326999 +0100
> @@ -0,0 +1,9 @@
> +What:		/sys/bus/iio/devices/iio:deviceX/out_current_heater_raw
> +What:		/sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available
> +KernelVersion:	5.3.8
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		Controls the heater device within the humidity sensor to get
> +		rid of excess condensation.
> +
> +		Valid control values are 0 = OFF, and 1 = ON.
> diff -uprN -X linux-5.3.8/Documentation/dontdiff linux-5.3.8/drivers/iio/humidity/hdc2010.c linux-5.3.8_hdc2010/drivers/iio/humidity/hdc2010.c
> --- linux-5.3.8/drivers/iio/humidity/hdc2010.c	1970-01-01 01:00:00.000000000 +0100
> +++ linux-5.3.8_hdc2010/drivers/iio/humidity/hdc2010.c	2020-03-06 09:51:49.844394670 +0100
> @@ -0,0 +1,332 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * hdc2010.c - Support for the TI HDC2010 and HDC2080
> + * temperature + relative humidity sensors
> + *
> + * Copyright (C) 2019 Norphonic AS
> + * Author: Eugene Zaikonnikov <eugene.zaikonnikov@norphonic.com>
> + *
> + * Datasheets:
> + * http://www.ti.com/product/HDC2010/datasheet
> + * http://www.ti.com/product/HDC2080/datasheet
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +
> +#define HDC2010_REG_TEMP_LOW			0x00
> +#define HDC2010_REG_TEMP_HIGH			0x01
> +#define HDC2010_REG_HUMIDITY_LOW		0x02
> +#define HDC2010_REG_HUMIDITY_HIGH		0x03
> +#define HDC2010_REG_INTERRUPT_DRDY		0x04
> +#define HDC2010_REG_TEMP_MAX			0x05
> +#define HDC2010_REG_HUMIDITY_MAX		0x06
> +#define HDC2010_REG_INTERRUPT_EN		0x07
> +#define HDC2010_REG_TEMP_OFFSET_ADJ		0x08
> +#define HDC2010_REG_HUMIDITY_OFFSET_ADJ		0x09
> +#define HDC2010_REG_TEMP_THR_L			0x0a
> +#define HDC2010_REG_TEMP_THR_H			0x0b
> +#define HDC2010_REG_RH_THR_L			0x0c
> +#define HDC2010_REG_RH_THR_H			0x0d
> +#define HDC2010_REG_RESET_DRDY_INT_CONF		0x0e
> +#define HDC2010_REG_MEASUREMENT_CONF		0x0f
> +
> +#define HDC2010_MEAS_CONF			GENMASK(2, 1)
> +#define HDC2010_MEAS_TRIG			BIT(0)
> +#define HDC2010_HEATER_EN			BIT(3)
> +#define HDC2010_AMM				GENMASK(6, 4)
> +
> +struct hdc2010_data {
> +	struct i2c_client *client;
> +	struct mutex lock;
> +	u8 measurement_config;
> +	u8 interrupt_config;
> +	u8 drdy_config;
> +};
> +
> +enum hdc2010_addr_groups {
> +	HDC2010_GROUP_TEMP = 0,
> +	HDC2010_GROUP_HUMIDITY
> +};
> +
> +struct hdc2010_reg_record {
> +	unsigned long primary;
> +	unsigned long peak;
> +};
> +
> +static const struct hdc2010_reg_record hdc2010_reg_translation[] = {
> +	[HDC2010_GROUP_TEMP] = {
> +		.primary = HDC2010_REG_TEMP_LOW,
> +		.peak = HDC2010_REG_TEMP_MAX,
> +	},
> +	[HDC2010_GROUP_HUMIDITY] = {
> +		.primary = HDC2010_REG_HUMIDITY_LOW,
> +		.peak = HDC2010_REG_HUMIDITY_MAX,
> +	},
> +};
> +
> +static IIO_CONST_ATTR(out_current_heater_raw_available,
> +		"0 1");
> +
> +static struct attribute *hdc2010_attributes[] = {
> +	&iio_const_attr_out_current_heater_raw_available.dev_attr.attr,
> +	NULL
> +};
> +
> +static const struct attribute_group hdc2010_attribute_group = {
> +	.attrs = hdc2010_attributes,
> +};
> +
> +static const struct iio_chan_spec hdc2010_channels[] = {
> +	{
> +		.type = IIO_TEMP,
> +		.address = HDC2010_GROUP_TEMP,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +			BIT(IIO_CHAN_INFO_PEAK) |
> +			BIT(IIO_CHAN_INFO_OFFSET) |
> +			BIT(IIO_CHAN_INFO_SCALE),
> +	},
> +	{
> +		.type = IIO_HUMIDITYRELATIVE,
> +		.address = HDC2010_GROUP_HUMIDITY,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +			BIT(IIO_CHAN_INFO_PEAK) |
> +			BIT(IIO_CHAN_INFO_SCALE),
> +	},
> +	{
> +		.type = IIO_CURRENT,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> +		.extend_name = "heater",
> +		.output = 1,
> +	},
> +};
> +
> +static int hdc2010_update_drdy_config(struct hdc2010_data *data,
> +					     char mask, char val)
> +{
> +	char tmp = (~mask & data->drdy_config) | val;
> +	int ret;
> +
> +	ret = i2c_smbus_write_byte_data(data->client,
> +					HDC2010_REG_RESET_DRDY_INT_CONF, tmp);
> +	if (!ret)
> +		data->drdy_config = tmp;
> +
> +	return ret;
> +}
> +
> +static int hdc2010_get_measurement_word(struct hdc2010_data *data,
> +					struct iio_chan_spec const *chan)
> +{
> +	struct i2c_client *client = data->client;
> +	s32 ret;
> +
> +	ret = i2c_smbus_read_word_data(client,
> +			hdc2010_reg_translation[chan->address].primary);
> +
> +	if (ret < 0)
> +		dev_err(&client->dev, "Could not read sensor data\n");
> +
> +	return ret;
> +}
> +
> +static int hdc2010_get_measurement_byte(struct hdc2010_data *data,
> +					struct iio_chan_spec const *chan)
> +{
> +	struct i2c_client *client = data->client;
> +	s32 ret;
> +
> +	ret = i2c_smbus_read_byte_data(client,
> +			hdc2010_reg_translation[chan->address].peak);
Bit odd to have a nice 'generic' measurement_byte name for the
function then use it only to read 'peak'.

I'd rename the function (same for the above similar cases)

> +
> +	if (ret < 0)
> +		dev_err(&client->dev, "Could not read sensor data\n");
> +
> +	return ret;
> +}
> +
> +static int hdc2010_get_heater_status(struct hdc2010_data *data)
> +{
> +	return !!(data->drdy_config & HDC2010_HEATER_EN);
> +}
> +
> +static int hdc2010_read_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *chan, int *val,
> +			    int *val2, long mask)
> +{
> +	struct hdc2010_data *data = iio_priv(indio_dev);
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW: {
> +		int ret;
> +
> +		if (chan->type == IIO_CURRENT) {
> +			*val = hdc2010_get_heater_status(data);
> +			ret = IIO_VAL_INT;

Why do the shared return below?  Just return IIO_VAL_INT here.

> +		} else {
> +			ret = iio_device_claim_direct_mode(indio_dev);
> +			if (ret)
> +				return ret;
> +			mutex_lock(&data->lock);
> +			ret = hdc2010_get_measurement_word(data, chan);
> +			mutex_unlock(&data->lock);
> +			iio_device_release_direct_mode(indio_dev);
> +			if (ret >= 0) {
			if (ret < 0)
				return ret;
			*val = ret;
			return IIO_VAL_INT;


> +				*val = ret;
> +				ret = IIO_VAL_INT;
> +			}
> +
> +		}
> +		return ret;

This won't be needed with the changes I suggest above.

> +	}
> +	case IIO_CHAN_INFO_PEAK: {
> +		int ret;
> +
> +		ret = iio_device_claim_direct_mode(indio_dev);
> +		if (ret)
> +			return ret;
> +		mutex_lock(&data->lock);
> +		ret = hdc2010_get_measurement_byte(data, chan);
> +		mutex_unlock(&data->lock);
> +		iio_device_release_direct_mode(indio_dev);
> +		if (ret >= 0) {
> +		  /* Scaling up the value so we can use same offset as RAW */
> +			*val = ret * 256;
> +			ret = IIO_VAL_INT;
> +		}
		if (ret < 0)
			return ret;
		*val = ret * 256;
		return IIO_VAL_INT;


> +
> +		return ret;
> +	}
> +	case IIO_CHAN_INFO_SCALE:
> +		*val2 = 65536;
> +		if (chan->type == IIO_TEMP)
> +			*val = 165000;
> +		else
> +			*val = 100000;
> +		return IIO_VAL_FRACTIONAL;
> +	case IIO_CHAN_INFO_OFFSET:
> +		*val = -15887;
> +		*val2 = 515151;
> +		return IIO_VAL_INT_PLUS_MICRO;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int hdc2010_write_raw(struct iio_dev *indio_dev,
> +			     struct iio_chan_spec const *chan,
> +			     int val, int val2, long mask)
> +{
> +	struct hdc2010_data *data = iio_priv(indio_dev);
> +	int new, ret = -EINVAL;

Unless I'm half asleep (which is possible :) ret is always
written below before being used.  Hence this init isn't needed.

> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		if (chan->type != IIO_CURRENT || val2 != 0)
> +			return -EINVAL;
> +
> +		switch (val) {
> +		case 1:
> +			new = HDC2010_HEATER_EN;
> +			break;
> +		case 0:
> +			new = 0;
> +			break;
> +		default:
> +			return -EINVAL;
> +		}
> +
> +		mutex_lock(&data->lock);
> +		ret = hdc2010_update_drdy_config(data, HDC2010_HEATER_EN, new);
> +		mutex_unlock(&data->lock);
> +		return ret;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static const struct iio_info hdc2010_info = {
> +	.read_raw = hdc2010_read_raw,
> +	.write_raw = hdc2010_write_raw,
> +	.attrs = &hdc2010_attribute_group,
> +};
> +
> +static int hdc2010_probe(struct i2c_client *client,
> +			 const struct i2c_device_id *id)
> +{
> +	struct iio_dev *indio_dev;
> +	struct hdc2010_data *data;
> +	u8 tmp;
> +	int ret;
> +
> +	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA |
> +				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
> +		return -EOPNOTSUPP;
> +
> +	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	data = iio_priv(indio_dev);
> +	i2c_set_clientdata(client, indio_dev);
> +	data->client = client;
> +	mutex_init(&data->lock);
> +
> +	indio_dev->dev.parent = &client->dev;
> +	indio_dev->name = dev_name(&client->dev);

That should be the part number.  IIRC that's not what you'll get
from dev_name called on the i2c device.  Note we let a few of
these in in the past and are now stuck with them... 

> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->info = &hdc2010_info;
> +
> +	indio_dev->channels = hdc2010_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(hdc2010_channels);
> +
> +	/* Enable Automatic Measurement Mode at 5Hz */
> +	hdc2010_update_drdy_config(data, HDC2010_AMM, HDC2010_AMM);

Error handling?

> +
> +	/*
> +	 * We enable both temp and humidity measurement.
> +	 * However the measurement won't start even in AMM until triggered.
> +	 */
> +	tmp = (u8)(data->measurement_config & ~HDC2010_MEAS_CONF) |
> +		HDC2010_MEAS_TRIG;
> +
> +	ret = i2c_smbus_write_byte_data(client,
> +					HDC2010_REG_MEASUREMENT_CONF, tmp);
> +	if (ret)
> +		return ret;
> +	data->measurement_config = tmp;
> +
> +	return devm_iio_device_register(&client->dev, indio_dev);
> +}
> +
> +static const struct i2c_device_id hdc2010_id[] = {
> +	{ "hdc2010" },
> +	{ "hdc2080" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, hdc2010_id);
> +
> +static const struct of_device_id hdc2010_dt_ids[] = {
> +	{ .compatible = "ti,hdc2010" },
> +	{ .compatible = "ti,hdc2080" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, hdc2010_dt_ids);
> +
> +static struct i2c_driver hdc2010_driver = {
> +	.driver = {
> +		.name	= "hdc2010",
> +		.of_match_table = hdc2010_dt_ids,
> +	},
> +	.probe = hdc2010_probe,
> +	.id_table = hdc2010_id,
> +};
> +module_i2c_driver(hdc2010_driver);
> +
> +MODULE_AUTHOR("Eugene Zaikonnikov <eugene.zaikonnikov@norphonic.com>");
> +MODULE_DESCRIPTION("TI HDC2010 humidity and temperature sensor driver");
> +MODULE_LICENSE("GPL");
> diff -uprN -X linux-5.3.8/Documentation/dontdiff linux-5.3.8/drivers/iio/humidity/Kconfig linux-5.3.8_hdc2010/drivers/iio/humidity/Kconfig
> --- linux-5.3.8/drivers/iio/humidity/Kconfig	2019-10-29 09:22:48.000000000 +0100
> +++ linux-5.3.8_hdc2010/drivers/iio/humidity/Kconfig	2019-11-28 14:31:27.794242693 +0100
> @@ -38,6 +38,16 @@ config HDC100X
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called hdc100x.
>  
> +config HDC2010
> +	tristate "TI HDC2010 relative humidity and temperature sensor"
> +	depends on I2C
> +	help
> +	  Say yes here to build support for the Texas Instruments
> +	  HDC2010 and HDC2080 relative humidity and temperature sensors.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called hdc2010.
> +
>  config HID_SENSOR_HUMIDITY
>  	tristate "HID Environmental humidity sensor"
>  	depends on HID_SENSOR_HUB
> diff -uprN -X linux-5.3.8/Documentation/dontdiff linux-5.3.8/drivers/iio/humidity/Makefile linux-5.3.8_hdc2010/drivers/iio/humidity/Makefile
> --- linux-5.3.8/drivers/iio/humidity/Makefile	2019-10-29 09:22:48.000000000 +0100
> +++ linux-5.3.8_hdc2010/drivers/iio/humidity/Makefile	2019-11-28 14:30:40.609892061 +0100
> @@ -6,6 +6,7 @@
>  obj-$(CONFIG_AM2315) += am2315.o
>  obj-$(CONFIG_DHT11) += dht11.o
>  obj-$(CONFIG_HDC100X) += hdc100x.o
> +obj-$(CONFIG_HDC2010) += hdc2010.o
>  obj-$(CONFIG_HID_SENSOR_HUMIDITY) += hid-sensor-humidity.o
>  
>  hts221-y := hts221_core.o \
> 


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v6 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  2020-03-22 16:17 ` [PATCH v6 1/2] Driver " Jonathan Cameron
@ 2020-03-23 14:39   ` Eugene Zalkonnikov
  2020-03-28 15:21     ` Jonathan Cameron
  0 siblings, 1 reply; 7+ messages in thread
From: Eugene Zalkonnikov @ 2020-03-23 14:39 UTC (permalink / raw)
  To: Jonathan Cameron
  Cc: Hartmut Knaack, Lars-Peter Clausen, development, linux-iio

Hi Jonathan,

> On 22 Mar 2020, at 17:17, Jonathan Cameron <jic23@kernel.org> wrote:
>> +static int hdc2010_write_raw(struct iio_dev *indio_dev,
>> +			     struct iio_chan_spec const *chan,
>> +			     int val, int val2, long mask)
>> +{
>> +	struct hdc2010_data *data = iio_priv(indio_dev);
>> +	int new, ret = -EINVAL;
> 
> Unless I'm half asleep (which is possible :) ret is always
> written below before being used.  Hence this init isn't needed.
> 
I suspect it’s a vestige from before all stylistic rewrites in recent patches. 
Same for the shared returns. Will change that.

>> +
>> +	indio_dev->dev.parent = &client->dev;
>> +	indio_dev->name = dev_name(&client->dev);
> 
> That should be the part number.  IIRC that's not what you'll get
> from dev_name called on the i2c device.  Note we let a few of
> these in in the past and are now stuck with them... 
> 
My access to actual hw is limited now, so to reduce the iterations here: what
is going to be a suitable device name? Would “hdc20x0” do? “hdc2010”?


Regards,
  Eugene.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v6 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  2020-03-23 14:39   ` Eugene Zalkonnikov
@ 2020-03-28 15:21     ` Jonathan Cameron
  0 siblings, 0 replies; 7+ messages in thread
From: Jonathan Cameron @ 2020-03-28 15:21 UTC (permalink / raw)
  To: Eugene Zalkonnikov
  Cc: Hartmut Knaack, Lars-Peter Clausen, development, linux-iio

On Mon, 23 Mar 2020 14:39:34 +0000
Eugene Zalkonnikov <ez@norphonic.com> wrote:

> Hi Jonathan,
> 
> > On 22 Mar 2020, at 17:17, Jonathan Cameron <jic23@kernel.org> wrote:  
> >> +static int hdc2010_write_raw(struct iio_dev *indio_dev,
> >> +			     struct iio_chan_spec const *chan,
> >> +			     int val, int val2, long mask)
> >> +{
> >> +	struct hdc2010_data *data = iio_priv(indio_dev);
> >> +	int new, ret = -EINVAL;  
> > 
> > Unless I'm half asleep (which is possible :) ret is always
> > written below before being used.  Hence this init isn't needed.
> >   
> I suspect it’s a vestige from before all stylistic rewrites in recent patches. 
> Same for the shared returns. Will change that.
> 
> >> +
> >> +	indio_dev->dev.parent = &client->dev;
> >> +	indio_dev->name = dev_name(&client->dev);  
> > 
> > That should be the part number.  IIRC that's not what you'll get
> > from dev_name called on the i2c device.  Note we let a few of
> > these in in the past and are now stuck with them... 
> >   
> My access to actual hw is limited now, so to reduce the iterations here: what
> is going to be a suitable device name? Would “hdc20x0” do? “hdc2010”?
Should match the part so hdc2010 or hdc2080 as appropriate. No wild cards.
> 
> 
> Regards,
>   Eugene.

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-17 20:06 [PATCH v6 1/2] Driver for TI HDC20x0 humidity and temperature sensors Eugene Zalkonnikov
2020-03-17 20:09 ` [PATCH v6 2/2] Device tree bindings " Eugene Zalkonnikov
2020-03-18 22:59   ` Rob Herring
2020-03-22 16:03   ` Jonathan Cameron
2020-03-22 16:17 ` [PATCH v6 1/2] Driver " Jonathan Cameron
2020-03-23 14:39   ` Eugene Zalkonnikov
2020-03-28 15:21     ` Jonathan Cameron

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git