linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Maíra Canal" <maira.canal@usp.br>
To: michael.hennerich@analog.com, lars@metafoo.de, jic23@kernel.org
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] iio: ad7266: convert probe to full device-managed
Date: Wed, 6 Apr 2022 12:12:36 -0300	[thread overview]
Message-ID: <Yk2t5D2x2+YorkTd@fedora> (raw)

Convert probe functions to device-managed variants, with exception of
the regulator, which required a devm_add_action_or_reset() hook
registration.

Signed-off-by: Maíra Canal <maira.canal@usp.br>
---
I apologize if you received this email more than once. For some reason, the
patch is not showing up on the linux-iio mailing list. I believe that the
problem was that Michael's Hennerich email on the MAINTAINERS list was
Michael.Hennerich@analog.com instead of michael.hennerich@analog.com. Anyway,
I am truly sorry with you received this email more than once.
---
 drivers/iio/adc/ad7266.c | 43 +++++++++++++---------------------------
 1 file changed, 14 insertions(+), 29 deletions(-)

diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c
index c17d9b5fbaf6..4f8f07d5c1a3 100644
--- a/drivers/iio/adc/ad7266.c
+++ b/drivers/iio/adc/ad7266.c
@@ -378,6 +378,11 @@ static const char * const ad7266_gpio_labels[] = {
 	"ad0", "ad1", "ad2",
 };
 
+static void ad7266_reg_disable(void *reg)
+{
+	regulator_disable(reg);
+}
+
 static int ad7266_probe(struct spi_device *spi)
 {
 	struct ad7266_platform_data *pdata = spi->dev.platform_data;
@@ -398,9 +403,13 @@ static int ad7266_probe(struct spi_device *spi)
 		if (ret)
 			return ret;
 
+		ret = devm_add_action_or_reset(&spi->dev, ad7266_reg_disable, st->reg);
+		if (ret)
+			return ret;
+
 		ret = regulator_get_voltage(st->reg);
 		if (ret < 0)
-			goto error_disable_reg;
+			return ret;
 
 		st->vref_mv = ret / 1000;
 	} else {
@@ -423,7 +432,7 @@ static int ad7266_probe(struct spi_device *spi)
 						      GPIOD_OUT_LOW);
 				if (IS_ERR(st->gpios[i])) {
 					ret = PTR_ERR(st->gpios[i]);
-					goto error_disable_reg;
+					return ret;
 				}
 			}
 		}
@@ -459,35 +468,12 @@ static int ad7266_probe(struct spi_device *spi)
 	spi_message_add_tail(&st->single_xfer[1], &st->single_msg);
 	spi_message_add_tail(&st->single_xfer[2], &st->single_msg);
 
-	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, &iio_pollfunc_store_time,
 		&ad7266_trigger_handler, &iio_triggered_buffer_setup_ops);
 	if (ret)
-		goto error_disable_reg;
-
-	ret = iio_device_register(indio_dev);
-	if (ret)
-		goto error_buffer_cleanup;
-
-	return 0;
-
-error_buffer_cleanup:
-	iio_triggered_buffer_cleanup(indio_dev);
-error_disable_reg:
-	if (!IS_ERR(st->reg))
-		regulator_disable(st->reg);
-
-	return ret;
-}
-
-static void ad7266_remove(struct spi_device *spi)
-{
-	struct iio_dev *indio_dev = spi_get_drvdata(spi);
-	struct ad7266_state *st = iio_priv(indio_dev);
+		return ret;
 
-	iio_device_unregister(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-	if (!IS_ERR(st->reg))
-		regulator_disable(st->reg);
+	return devm_iio_device_register(&spi->dev, indio_dev);
 }
 
 static const struct spi_device_id ad7266_id[] = {
@@ -502,7 +488,6 @@ static struct spi_driver ad7266_driver = {
 		.name	= "ad7266",
 	},
 	.probe		= ad7266_probe,
-	.remove		= ad7266_remove,
 	.id_table	= ad7266_id,
 };
 module_spi_driver(ad7266_driver);
-- 
2.35.1


             reply	other threads:[~2022-04-06 17:15 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-06 15:12 Maíra Canal [this message]
2022-04-07  3:18 ` [PATCH] iio: ad7266: convert probe to full device-managed Marcelo Schmitt
2022-04-07  9:00 ` Sa, Nuno
  -- strict thread matches above, loose matches on Subject: below --
2022-04-06 12:29 Maíra Canal
2022-04-06 12:16 Maíra Canal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Yk2t5D2x2+YorkTd@fedora \
    --to=maira.canal@usp.br \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.hennerich@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).