Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 0/5] iio: imu: st_lsm6dsx: Add support for LSM9DS1
@ 2019-07-25  5:31 Martin Kepplinger
  2019-07-25  5:31 ` [PATCH v3 1/5] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings Martin Kepplinger
                   ` (4 more replies)
  0 siblings, 5 replies; 13+ messages in thread
From: Martin Kepplinger @ 2019-07-25  5:31 UTC (permalink / raw)
  To: lorenzo.bianconi83, jic23, knaack.h, lars, pmeerw
  Cc: linux-iio, devicetree, linux-kernel, Martin Kepplinger

Resend 2 of Lorenzo's patches that this builds upon. They have been previously
posted to linux-iio only:
https://lore.kernel.org/linux-iio/cover.1563226641.git.lorenzo@kernel.org/

Then, add support for the LSM9DS1 accel/gyro unit in 3 simple steps. This
is also only a resend and rebase of the v2:
https://lore.kernel.org/linux-iio/20190716093325.7683-1-martin.kepplinger@puri.sm/

So I call this v3 and Lorenzo, I hope that it's fine for you that I just
take your patches here - also since they mention to be intended for supporting
the device.


revision history
----------------
v3: rebase and add Lorenzo's patches in order to apply to the iio testing brach
v2: further simplifications based on Lorenzo's feedback
v1: initial change for adding lsm9ds1 support




Lorenzo Bianconi (2):
  iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
  iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings

Martin Kepplinger (3):
  iio: imu: st_lsm6sdx: move register definitions to sensor_settings
    struct
  iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings

 .../bindings/iio/imu/st_lsm6dsx.txt           |   1 +
 drivers/iio/imu/st_lsm6dsx/Kconfig            |   1 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h       |  12 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c  | 490 +++++++++++++++---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c   |   5 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c   |   5 +
 6 files changed, 440 insertions(+), 74 deletions(-)

-- 
2.20.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, back to index

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-25  5:31 [PATCH v3 0/5] iio: imu: st_lsm6dsx: Add support for LSM9DS1 Martin Kepplinger
2019-07-25  5:31 ` [PATCH v3 1/5] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings Martin Kepplinger
2019-07-25  5:31 ` [PATCH v3 2/5] iio: imu: st_lsm6dsx: move fs_table " Martin Kepplinger
2019-07-25  5:31 ` [PATCH v3 3/5] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct Martin Kepplinger
2019-07-25  5:31 ` [PATCH v3 4/5] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1 Martin Kepplinger
     [not found]   ` <CAA2SeNK-pjkSWVsrv5dehEJbakZqR0oPF3DQ5mzhiiOD3Npxkg@mail.gmail.com>
2019-07-25  8:14     ` Martin Kepplinger
     [not found]       ` <CAA2SeN+xZGykSos=j6rFGM1cJBVEV5BTYSpoKYPWTLKFnEjKtw@mail.gmail.com>
2019-07-27  8:51         ` Martin Kepplinger
2019-07-27 17:48   ` Jonathan Cameron
2019-07-28  6:04     ` Martin Kepplinger
2019-07-28  8:34       ` Jonathan Cameron
2019-07-28 17:52         ` Lorenzo Bianconi
2019-08-05 13:44           ` Jonathan Cameron
2019-07-25  5:31 ` [PATCH v3 5/5] dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings Martin Kepplinger

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org linux-iio@archiver.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox