From: Lorenzo Bianconi <lorenzo@kernel.org>
To: jic23@kernel.org
Cc: linux-iio@vger.kernel.org
Subject: [PATCH] iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
Date: Sun, 19 May 2019 10:58:23 +0200 [thread overview]
Message-ID: <a79978d7b8b9762954bf15cb205bada6dc66079a.1558256188.git.lorenzo@kernel.org> (raw)
In-Reply-To: <cover.1558256188.git.lorenzo@kernel.org>
Properly suspend/resume i2c slaves connected to st_lsm6dsx master
controller if the CPU goes in suspended state
Fixes: c91c1c844ebd ("imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 25 +++++++++++++-------
2 files changed, 19 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 004a8a1a0027..6ef3577234a0 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -271,6 +271,7 @@ struct st_lsm6dsx_sensor {
* @conf_lock: Mutex to prevent concurrent FIFO configuration update.
* @page_lock: Mutex to prevent concurrent memory page configuration.
* @fifo_mode: FIFO operating mode supported by the device.
+ * @suspend_mask: Suspended sensor bitmask.
* @enable_mask: Enabled sensor bitmask.
* @ts_sip: Total number of timestamp samples in a given pattern.
* @sip: Total number of samples (acc/gyro/ts) in a given pattern.
@@ -288,6 +289,7 @@ struct st_lsm6dsx_hw {
struct mutex page_lock;
enum st_lsm6dsx_fifo_mode fifo_mode;
+ u8 suspend_mask;
u8 enable_mask;
u8 ts_sip;
u8 sip;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index cf82c9049945..be5c87c8266d 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -1110,8 +1110,6 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
{
struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
struct st_lsm6dsx_sensor *sensor;
- const struct st_lsm6dsx_reg *reg;
- unsigned int data;
int i, err = 0;
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
@@ -1122,12 +1120,16 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
if (!(hw->enable_mask & BIT(sensor->id)))
continue;
- reg = &st_lsm6dsx_odr_table[sensor->id].reg;
- data = ST_LSM6DSX_SHIFT_VAL(0, reg->mask);
- err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask,
- data);
+ if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
+ sensor->id == ST_LSM6DSX_ID_EXT1 ||
+ sensor->id == ST_LSM6DSX_ID_EXT2)
+ err = st_lsm6dsx_shub_set_enable(sensor, false);
+ else
+ err = st_lsm6dsx_sensor_set_enable(sensor, false);
if (err < 0)
return err;
+
+ hw->suspend_mask |= BIT(sensor->id);
}
if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS)
@@ -1147,12 +1149,19 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
continue;
sensor = iio_priv(hw->iio_devs[i]);
- if (!(hw->enable_mask & BIT(sensor->id)))
+ if (!(hw->suspend_mask & BIT(sensor->id)))
continue;
- err = st_lsm6dsx_set_odr(sensor, sensor->odr);
+ if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
+ sensor->id == ST_LSM6DSX_ID_EXT1 ||
+ sensor->id == ST_LSM6DSX_ID_EXT2)
+ err = st_lsm6dsx_shub_set_enable(sensor, true);
+ else
+ err = st_lsm6dsx_sensor_set_enable(sensor, true);
if (err < 0)
return err;
+
+ hw->suspend_mask &= ~BIT(sensor->id);
}
if (hw->enable_mask)
--
2.21.0
next parent reply other threads:[~2019-05-19 17:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1558256188.git.lorenzo@kernel.org>
2019-05-19 8:58 ` Lorenzo Bianconi [this message]
2019-05-19 11:36 ` [PATCH] iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a79978d7b8b9762954bf15cb205bada6dc66079a.1558256188.git.lorenzo@kernel.org \
--to=lorenzo@kernel.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).