Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
To: Martin Kaiser <martin@kaiser.cx>
Cc: Jonathan Cameron <jic23@kernel.org>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] iio: potentiometer: add a driver for Maxim 5432-5435
Date: Sun, 21 Jul 2019 22:48:03 +0200 (CEST)
Message-ID: <alpine.DEB.2.21.1907212242370.9148@vps.pmeerw.net> (raw)
In-Reply-To: <20190721175915.27192-1-martin@kaiser.cx>

On Sun, 21 Jul 2019, Martin Kaiser wrote:

> Add a driver for the Maxim Integrated MAX5432-MAX5435 family of digital
> potentiometers.
> 
> These potentiometers are connected via I2C and have 32 wiper positions.
> 
> Supported functionality
> - set the volatile wiper position
> - read the potentiometer scale

please see some minor comment below
 
> Datasheet:
> https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
> 
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> ---
>  .../bindings/iio/potentiometer/max5432.txt         |  22 ++++
>  drivers/iio/potentiometer/Kconfig                  |  11 ++
>  drivers/iio/potentiometer/Makefile                 |   1 +
>  drivers/iio/potentiometer/max5432.c                | 131 +++++++++++++++++++++
>  4 files changed, 165 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
>  create mode 100644 drivers/iio/potentiometer/max5432.c
> 
> diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt b/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
> new file mode 100644
> index 000000000000..89ccc8fc7df1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/potentiometer/max5432.txt
> @@ -0,0 +1,22 @@
> +* Maxim Integrated MAX5432-MAX5435 Digital Potentiometers.
> +
> +The node for this driver must be a child node of an I2C controller, hence
> +all mandatory properties for your controller must be specified. See directory:
> +
> +        Documentation/devicetree/bindings/i2c
> +
> +for more details.
> +
> +Required properties:
> +	- compatible:  	Must be one of the following, depending on the
> +			model:
> +			"maxim,max5432"
> +			"maxim,max5433"
> +			"maxim,max5434"
> +			"maxim,max5435"
> +
> +Example:
> +max5434@28 {
> +	compatible = "maxim,max5434";
> +	reg = <0x28>;
> +};
> diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
> index ebc7c72a5e36..4cac0173db8b 100644
> --- a/drivers/iio/potentiometer/Kconfig
> +++ b/drivers/iio/potentiometer/Kconfig
> @@ -26,6 +26,17 @@ config DS1803
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called ds1803.
>  
> +config MAX5432
> +	tristate "Maxim MAX5432-MAX5435 Digital Potentiometer driver"
> +	depends on I2C
> +	help
> +	  Say yes here to build support for the Maxim
> +	  MAX5432, MAX5433, MAX5434 and MAX5435 digital
> +	  potentiometer chips.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called max5432.
> +
>  config MAX5481
>  	tristate "Maxim MAX5481-MAX5484 Digital Potentiometer driver"
>  	depends on SPI
> diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
> index 8ff55138cf12..091adf3cdd0b 100644
> --- a/drivers/iio/potentiometer/Makefile
> +++ b/drivers/iio/potentiometer/Makefile
> @@ -6,6 +6,7 @@
>  # When adding new entries keep the list in alphabetical order
>  obj-$(CONFIG_AD5272) += ad5272.o
>  obj-$(CONFIG_DS1803) += ds1803.o
> +obj-$(CONFIG_MAX5432) += max5432.o
>  obj-$(CONFIG_MAX5481) += max5481.o
>  obj-$(CONFIG_MAX5487) += max5487.o
>  obj-$(CONFIG_MCP4018) += mcp4018.o
> diff --git a/drivers/iio/potentiometer/max5432.c b/drivers/iio/potentiometer/max5432.c
> new file mode 100644
> index 000000000000..959883297fb5
> --- /dev/null
> +++ b/drivers/iio/potentiometer/max5432.c
> @@ -0,0 +1,131 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Maxim Integrated MAX5432-MAX5435 digital potentiometer driver
> + * Copyright (C) 2019 Martin Kaiser <martin@kaiser.cx>
> + *
> + * Datasheet:
> + * https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +
> +/* All chip variants have 32 wiper positions. */
> +#define MAX5432_MAX_POS 31
> +
> +#define OHM_50K   (50  * 1000)
> +#define OHM_100K  (100 * 1000)

MAX5432_ prefix please

> +
> +/* Update the volatile (currently active) setting. */
> +#define CMD_VREG  0x11

MAX5432_ prefix please

> +
> +struct max5432_data {
> +	struct i2c_client *client;
> +	u32 ohm;
> +};
> +
> +static const struct iio_chan_spec max5432_channels[] = {
> +	{
> +		.type = IIO_RESISTANCE,
> +		.indexed = 1,
> +		.output = 1,
> +		.channel = 0,
> +		.address = CMD_VREG,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> +		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> +	}
> +};
> +
> +static int max5432_read_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *chan,
> +			    int *val, int *val2, long mask)
> +{
> +	struct max5432_data *data = iio_priv(indio_dev);
> +
> +	if (mask != IIO_CHAN_INFO_SCALE)
> +		return -EINVAL;
> +
> +	*val = data->ohm;
> +	*val2 = MAX5432_MAX_POS;
> +
> +	return IIO_VAL_FRACTIONAL;
> +}
> +
> +static int max5432_write_raw(struct iio_dev *indio_dev,
> +			     struct iio_chan_spec const *chan,
> +			     int val, int val2, long mask)
> +{
> +	struct max5432_data *data = iio_priv(indio_dev);
> +	u8 data_byte;
> +
> +	if (mask != IIO_CHAN_INFO_RAW)
> +		return -EINVAL;
> +
> +	if (val < 0 || val > MAX5432_MAX_POS)
> +		return -EINVAL;
> +
> +	if (val2 != 0)
> +		return -EINVAL;
> +
> +	/* Wiper position is in bits D7-D3. (D2-D0 are don't care bits.) */
> +	data_byte = val << 3;
> +	return i2c_smbus_write_byte_data(
> +			data->client, chan->address, data_byte);
> +}
> +
> +static const struct iio_info max5432_info = {
> +	.read_raw = max5432_read_raw,
> +	.write_raw = max5432_write_raw,
> +};
> +
> +static int max5432_probe(
> +		struct i2c_client *client, const struct i2c_device_id *id)
> +{
> +	struct device *dev = &client->dev;
> +	struct iio_dev *indio_dev;
> +	struct max5432_data *data;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(struct max5432_data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(client, indio_dev);
> +
> +	data = iio_priv(indio_dev);
> +	data->client = client;
> +	data->ohm = (u32)of_device_get_match_data(dev);
> +
> +	indio_dev->dev.parent = dev;
> +	indio_dev->info = &max5432_info;
> +	indio_dev->channels = max5432_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(max5432_channels);
> +	indio_dev->name = client->name;
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +}
> +
> +static const struct of_device_id max5432_dt_ids[] = {
> +	{ .compatible = "maxim,max5432", .data = (void *)OHM_50K  },
> +	{ .compatible = "maxim,max5433", .data = (void *)OHM_100K },
> +	{ .compatible = "maxim,max5434", .data = (void *)OHM_50K  },
> +	{ .compatible = "maxim,max5435", .data = (void *)OHM_100K },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, max5432_dt_ids);
> +
> +static struct i2c_driver max5432_driver = {
> +	.driver = {
> +		.name = "max5432",
> +		.of_match_table = of_match_ptr(max5432_dt_ids),
> +	},
> +	.probe = max5432_probe,
> +};
> +
> +module_i2c_driver(max5432_driver);
> +
> +MODULE_AUTHOR("Martin Kaiser <martin@kaiser.cx>");
> +MODULE_DESCRIPTION("max5432-max5435 digital potentiometers");
> +MODULE_LICENSE("GPL v2");
> 

-- 

Peter Meerwald-Stadler
Mobile: +43 664 24 44 418

  reply index

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-21 17:59 Martin Kaiser
2019-07-21 20:48 ` Peter Meerwald-Stadler [this message]
2019-07-22 20:13 ` kbuild test robot
2019-07-23  8:53 ` [PATCH v2] " Martin Kaiser
2019-07-27 20:45   ` Jonathan Cameron
2019-07-29 11:45 ` [PATCH v3 1/2] " Martin Kaiser
2019-07-29 11:45   ` [PATCH v3 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding Martin Kaiser
2019-07-29 23:43     ` Rob Herring
2019-07-31 14:07 ` [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435 Martin Kaiser
2019-07-31 14:07   ` [PATCH v4 2/2] dt-bindings: iio: potentiometer: add max5432.yaml binding Martin Kaiser
2019-07-31 16:50     ` Rob Herring
2019-08-05 13:32       ` Jonathan Cameron
2019-08-05 13:30   ` [PATCH v4 1/2] iio: potentiometer: add a driver for Maxim 5432-5435 Jonathan Cameron

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.21.1907212242370.9148@vps.pmeerw.net \
    --to=pmeerw@pmeerw.net \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin@kaiser.cx \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org linux-iio@archiver.kernel.org
	public-inbox-index linux-iio


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox