Re: [PATCH 1/2] dt-bindings: iio: light: Add binding for ADUX1020

["Ardelean, Alexandru" <alexandru.Ardelean@analog.com>]

On Mon, 2019-10-07 at 18:10 +0530, Manivannan Sadhasivam wrote:
> [External]
> 
> Hi Ardelean, 
> 
> On 7 October 2019 3:51:16 PM IST, "Ardelean, Alexandru" <
> alexandru.Ardelean@analog.com> wrote:
> > On Mon, 2019-10-07 at 15:40 +0530, Manivannan Sadhasivam wrote:
> > > [External]
> > > 
> > > Add devicetree binding for Analog Devices ADUX1020 Photometric
> > > sensor.
> > > 
> > 
> > Hey,
> > 
> > Thanks for the patches.
> > 
> > This dt-binding docs is in text format.
> > dt-binding docs now need to be in YAML format.
> > 
> 
> Sure. I can convert to YAML binding. 
> 
> > Also, patches for dt-bindings docs usually come after the driver is
> > added.
> > So, this patch should be the second in the series, not the first.
> > 
> 
> I don't think so. The convention is to put dt-bindings patch upfront for
> all subsystems. Not sure if IIO differs here. 

Now that you mention, I'm not sure either.
We typically sent the dt-bindings one last, so I assumed it was the
default.

> 
> Thanks, 
> Mani
> > Alex
> > 
> > > Signed-off-by: Manivannan Sadhasivam
> > <manivannan.sadhasivam@linaro.org>
> > > ---
> > >  .../bindings/iio/light/adux1020.txt           | 22
> > +++++++++++++++++++
> > >  1 file changed, 22 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/iio/light/adux1020.txt
> > > 
> > > diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.txt
> > > b/Documentation/devicetree/bindings/iio/light/adux1020.txt
> > > new file mode 100644
> > > index 000000000000..e896dda30e36
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/iio/light/adux1020.txt
> > > @@ -0,0 +1,22 @@
> > > +Analog Devices ADUX1020 Photometric sensor
> > > +
> > > +Link to datasheet: 
> > > 
> > https://www.analog.com/media/en/technical-documentation/data-sheets/ADUX1020.pdf
> > > +
> > > +Required properties:
> > > +
> > > + - compatible: should be "adi,adux1020"
> > > + - reg: the I2C address of the sensor
> > > +
> > > +Optional properties:
> > > +
> > > + - interrupts: interrupt mapping for IRQ as documented in
> > > +  
> > Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> > > +
> > > +Example:
> > > +
> > > +adux1020@64 {
> > > +	compatible = "adi,adux1020";
> > > +	reg = <0x64>;
> > > +	interrupt-parent = <&msmgpio>;
> > > +	interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
> > > +};