linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 0/2] Simplify count_read/count_write/signal_read
@ 2019-09-18 14:22 William Breathitt Gray
  2019-09-18 14:22 ` [PATCH v3 1/2] counter: Simplify the count_read and count_write callbacks William Breathitt Gray
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: William Breathitt Gray @ 2019-09-18 14:22 UTC (permalink / raw)
  To: jic23
  Cc: linux-kernel, linux-iio, patrick.havelange, fabrice.gasnier,
	mcoquelin.stm32, alexandre.torgue, linux-stm32, linux-arm-kernel,
	benjamin.gaignard, William Breathitt Gray

Changes in v3:
 - Squash code changes to single patch to avoid compilation error

The changes in this patchset will not affect the userspace interface.
Rather, these changes are intended to simplify the kernelspace Counter
callbacks for counter device driver authors.

The following main changes are proposed:

* Retire the opaque counter_count_read_value/counter_count_write_value
  structures and simply represent count data as an unsigned integer.

* Retire the opaque counter_signal_read_value structure and represent
  Signal data as a counter_signal_value enum.

These changes should reduce some complexity and code in the use and
implementation of the count_read, count_write, and signal_read
callbacks.

The opaque structures for Count data and Signal data were introduced
originally in anticipation of supporting various representations of
counter data (e.g. arbitrary-precision tallies, floating-point spherical
coordinate positions, etc). However, with the counter device drivers
that have appeared, it's become apparent that utilizing opaque
structures in kernelspace is not the best approach to take.

I believe it is best to let userspace applications decide how to
interpret the count data they receive. There are a couple of reasons why
it would be good to do so:

* Users use their devices in unexpected ways.

  For example, a quadrature encoder counter device is typically used to
  keep track of the position of a motor, but a user could set the device
  in a pulse-direction mode and instead use it to count sporadic rising
  edges from an arbitrary signal line unrelated to positioning. Users
  should have the freedom to decide what their data represents.

* Most counter devices represent data as unsigned integers anyway.

  For example, whether the device is a tally counter or position
  counter, the count data is represented to the user as an unsigned
  integer value. So specifying that one device is representing tallies
  while the other specifies positions does not provide much utility from
  an interface perspective.

For these reasons, the count_read and count_write callbacks have been
redefined to pass count data directly as unsigned long instead of passed
via opaque structures:

        count_read(struct counter_device *counter,
                   struct counter_count *count, unsigned long *val);
        count_write(struct counter_device *counter,
                    struct counter_count *count, unsigned long val);

Similarly, the signal_read is redefined to pass Signal data directly as
a counter_signal_value enum instead of via an opaque structure:

        signal_read(struct counter_device *counter,
                    struct counter_signal *signal,
                    enum counter_signal_value *val);

The counter_signal_value enum is simply the counter_signal_level enum
redefined to remove the references to the Signal data "level" data type.

William Breathitt Gray (2):
  counter: Simplify the count_read and count_write callbacks
  docs: driver-api: generic-counter: Update Count and Signal data types

 Documentation/driver-api/generic-counter.rst |  22 ++--
 drivers/counter/104-quad-8.c                 |  33 ++----
 drivers/counter/counter.c                    | 101 +++----------------
 drivers/counter/ftm-quaddec.c                |  14 +--
 drivers/counter/stm32-lptimer-cnt.c          |   5 +-
 drivers/counter/stm32-timer-cnt.c            |  17 +---
 include/linux/counter.h                      |  74 ++------------
 7 files changed, 53 insertions(+), 213 deletions(-)

-- 
2.23.0


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v3 1/2] counter: Simplify the count_read and count_write callbacks
  2019-09-18 14:22 [PATCH v3 0/2] Simplify count_read/count_write/signal_read William Breathitt Gray
@ 2019-09-18 14:22 ` William Breathitt Gray
  2019-09-18 14:22 ` [PATCH v3 2/2] docs: driver-api: generic-counter: Update Count and Signal data types William Breathitt Gray
  2019-10-05 14:33 ` [PATCH v3 0/2] Simplify count_read/count_write/signal_read Jonathan Cameron
  2 siblings, 0 replies; 6+ messages in thread
From: William Breathitt Gray @ 2019-09-18 14:22 UTC (permalink / raw)
  To: jic23
  Cc: linux-kernel, linux-iio, patrick.havelange, fabrice.gasnier,
	mcoquelin.stm32, alexandre.torgue, linux-stm32, linux-arm-kernel,
	benjamin.gaignard, William Breathitt Gray

The count_read and count_write callbacks are simplified to pass val as
unsigned long rather than as an opaque data structure. The opaque
counter_count_read_value and counter_count_write_value structures,
counter_count_value_type enum, and relevant counter_count_read_value_set
and counter_count_write_value_get functions, are removed as they are no
longer used.

Cc: Patrick Havelange <patrick.havelange@essensium.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/counter/104-quad-8.c        |  33 +++------
 drivers/counter/counter.c           | 101 +++++-----------------------
 drivers/counter/ftm-quaddec.c       |  14 ++--
 drivers/counter/stm32-lptimer-cnt.c |   5 +-
 drivers/counter/stm32-timer-cnt.c   |  17 ++---
 include/linux/counter.h             |  74 +++-----------------
 6 files changed, 45 insertions(+), 199 deletions(-)

diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
index 00b113f4b958..17e67a84777d 100644
--- a/drivers/counter/104-quad-8.c
+++ b/drivers/counter/104-quad-8.c
@@ -562,11 +562,10 @@ static const struct iio_chan_spec quad8_channels[] = {
 };
 
 static int quad8_signal_read(struct counter_device *counter,
-	struct counter_signal *signal, struct counter_signal_read_value *val)
+	struct counter_signal *signal, enum counter_signal_value *val)
 {
 	const struct quad8_iio *const priv = counter->priv;
 	unsigned int state;
-	enum counter_signal_level level;
 
 	/* Only Index signal levels can be read */
 	if (signal->id < 16)
@@ -575,22 +574,19 @@ static int quad8_signal_read(struct counter_device *counter,
 	state = inb(priv->base + QUAD8_REG_INDEX_INPUT_LEVELS)
 		& BIT(signal->id - 16);
 
-	level = (state) ? COUNTER_SIGNAL_LEVEL_HIGH : COUNTER_SIGNAL_LEVEL_LOW;
-
-	counter_signal_read_value_set(val, COUNTER_SIGNAL_LEVEL, &level);
+	*val = (state) ? COUNTER_SIGNAL_HIGH : COUNTER_SIGNAL_LOW;
 
 	return 0;
 }
 
 static int quad8_count_read(struct counter_device *counter,
-	struct counter_count *count, struct counter_count_read_value *val)
+	struct counter_count *count, unsigned long *val)
 {
 	const struct quad8_iio *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
 	unsigned int flags;
 	unsigned int borrow;
 	unsigned int carry;
-	unsigned long position;
 	int i;
 
 	flags = inb(base_offset + 1);
@@ -598,36 +594,27 @@ static int quad8_count_read(struct counter_device *counter,
 	carry = !!(flags & QUAD8_FLAG_CT);
 
 	/* Borrow XOR Carry effectively doubles count range */
-	position = (unsigned long)(borrow ^ carry) << 24;
+	*val = (unsigned long)(borrow ^ carry) << 24;
 
 	/* Reset Byte Pointer; transfer Counter to Output Latch */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
 	     base_offset + 1);
 
 	for (i = 0; i < 3; i++)
-		position |= (unsigned long)inb(base_offset) << (8 * i);
-
-	counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &position);
+		*val |= (unsigned long)inb(base_offset) << (8 * i);
 
 	return 0;
 }
 
 static int quad8_count_write(struct counter_device *counter,
-	struct counter_count *count, struct counter_count_write_value *val)
+	struct counter_count *count, unsigned long val)
 {
 	const struct quad8_iio *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
-	int err;
-	unsigned long position;
 	int i;
 
-	err = counter_count_write_value_get(&position, COUNTER_COUNT_POSITION,
-					    val);
-	if (err)
-		return err;
-
 	/* Only 24-bit values are supported */
-	if (position > 0xFFFFFF)
+	if (val > 0xFFFFFF)
 		return -EINVAL;
 
 	/* Reset Byte Pointer */
@@ -635,7 +622,7 @@ static int quad8_count_write(struct counter_device *counter,
 
 	/* Counter can only be set via Preset Register */
 	for (i = 0; i < 3; i++)
-		outb(position >> (8 * i), base_offset);
+		outb(val >> (8 * i), base_offset);
 
 	/* Transfer Preset Register to Counter */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_PRESET_CNTR, base_offset + 1);
@@ -644,9 +631,9 @@ static int quad8_count_write(struct counter_device *counter,
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
 
 	/* Set Preset Register back to original value */
-	position = priv->preset[count->id];
+	val = priv->preset[count->id];
 	for (i = 0; i < 3; i++)
-		outb(position >> (8 * i), base_offset);
+		outb(val >> (8 * i), base_offset);
 
 	/* Reset Borrow, Carry, Compare, and Sign flags */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_FLAGS, base_offset + 1);
diff --git a/drivers/counter/counter.c b/drivers/counter/counter.c
index 106bc7180cd8..6a683d086008 100644
--- a/drivers/counter/counter.c
+++ b/drivers/counter/counter.c
@@ -220,86 +220,6 @@ ssize_t counter_device_enum_available_read(struct counter_device *counter,
 }
 EXPORT_SYMBOL_GPL(counter_device_enum_available_read);
 
-static const char *const counter_signal_level_str[] = {
-	[COUNTER_SIGNAL_LEVEL_LOW] = "low",
-	[COUNTER_SIGNAL_LEVEL_HIGH] = "high"
-};
-
-/**
- * counter_signal_read_value_set - set counter_signal_read_value data
- * @val:	counter_signal_read_value structure to set
- * @type:	property Signal data represents
- * @data:	Signal data
- *
- * This function sets an opaque counter_signal_read_value structure with the
- * provided Signal data.
- */
-void counter_signal_read_value_set(struct counter_signal_read_value *const val,
-				   const enum counter_signal_value_type type,
-				   void *const data)
-{
-	if (type == COUNTER_SIGNAL_LEVEL)
-		val->len = sprintf(val->buf, "%s\n",
-				   counter_signal_level_str[*(enum counter_signal_level *)data]);
-	else
-		val->len = 0;
-}
-EXPORT_SYMBOL_GPL(counter_signal_read_value_set);
-
-/**
- * counter_count_read_value_set - set counter_count_read_value data
- * @val:	counter_count_read_value structure to set
- * @type:	property Count data represents
- * @data:	Count data
- *
- * This function sets an opaque counter_count_read_value structure with the
- * provided Count data.
- */
-void counter_count_read_value_set(struct counter_count_read_value *const val,
-				  const enum counter_count_value_type type,
-				  void *const data)
-{
-	switch (type) {
-	case COUNTER_COUNT_POSITION:
-		val->len = sprintf(val->buf, "%lu\n", *(unsigned long *)data);
-		break;
-	default:
-		val->len = 0;
-	}
-}
-EXPORT_SYMBOL_GPL(counter_count_read_value_set);
-
-/**
- * counter_count_write_value_get - get counter_count_write_value data
- * @data:	Count data
- * @type:	property Count data represents
- * @val:	counter_count_write_value structure containing data
- *
- * This function extracts Count data from the provided opaque
- * counter_count_write_value structure and stores it at the address provided by
- * @data.
- *
- * RETURNS:
- * 0 on success, negative error number on failure.
- */
-int counter_count_write_value_get(void *const data,
-				  const enum counter_count_value_type type,
-				  const struct counter_count_write_value *const val)
-{
-	int err;
-
-	switch (type) {
-	case COUNTER_COUNT_POSITION:
-		err = kstrtoul(val->buf, 0, data);
-		if (err)
-			return err;
-		break;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(counter_count_write_value_get);
-
 struct counter_attr_parm {
 	struct counter_device_attr_group *group;
 	const char *prefix;
@@ -369,6 +289,11 @@ struct counter_signal_unit {
 	struct counter_signal *signal;
 };
 
+static const char *const counter_signal_value_str[] = {
+	[COUNTER_SIGNAL_LOW] = "low",
+	[COUNTER_SIGNAL_HIGH] = "high"
+};
+
 static ssize_t counter_signal_show(struct device *dev,
 				   struct device_attribute *attr, char *buf)
 {
@@ -377,13 +302,13 @@ static ssize_t counter_signal_show(struct device *dev,
 	const struct counter_signal_unit *const component = devattr->component;
 	struct counter_signal *const signal = component->signal;
 	int err;
-	struct counter_signal_read_value val = { .buf = buf };
+	enum counter_signal_value val;
 
 	err = counter->ops->signal_read(counter, signal, &val);
 	if (err)
 		return err;
 
-	return val.len;
+	return sprintf(buf, "%s\n", counter_signal_value_str[val]);
 }
 
 struct counter_name_unit {
@@ -788,13 +713,13 @@ static ssize_t counter_count_show(struct device *dev,
 	const struct counter_count_unit *const component = devattr->component;
 	struct counter_count *const count = component->count;
 	int err;
-	struct counter_count_read_value val = { .buf = buf };
+	unsigned long val;
 
 	err = counter->ops->count_read(counter, count, &val);
 	if (err)
 		return err;
 
-	return val.len;
+	return sprintf(buf, "%lu\n", val);
 }
 
 static ssize_t counter_count_store(struct device *dev,
@@ -806,9 +731,13 @@ static ssize_t counter_count_store(struct device *dev,
 	const struct counter_count_unit *const component = devattr->component;
 	struct counter_count *const count = component->count;
 	int err;
-	struct counter_count_write_value val = { .buf = buf };
+	unsigned long val;
+
+	err = kstrtoul(buf, 0, &val);
+	if (err)
+		return err;
 
-	err = counter->ops->count_write(counter, count, &val);
+	err = counter->ops->count_write(counter, count, val);
 	if (err)
 		return err;
 
diff --git a/drivers/counter/ftm-quaddec.c b/drivers/counter/ftm-quaddec.c
index 4046aa9f9234..c2b3fdfd8b77 100644
--- a/drivers/counter/ftm-quaddec.c
+++ b/drivers/counter/ftm-quaddec.c
@@ -178,31 +178,25 @@ static const enum counter_count_function ftm_quaddec_count_functions[] = {
 
 static int ftm_quaddec_count_read(struct counter_device *counter,
 				  struct counter_count *count,
-				  struct counter_count_read_value *val)
+				  unsigned long *val)
 {
 	struct ftm_quaddec *const ftm = counter->priv;
 	uint32_t cntval;
 
 	ftm_read(ftm, FTM_CNT, &cntval);
 
-	counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &cntval);
+	*val = cntval;
 
 	return 0;
 }
 
 static int ftm_quaddec_count_write(struct counter_device *counter,
 				   struct counter_count *count,
-				   struct counter_count_write_value *val)
+				   const unsigned long val)
 {
 	struct ftm_quaddec *const ftm = counter->priv;
-	u32 cnt;
-	int err;
 
-	err = counter_count_write_value_get(&cnt, COUNTER_COUNT_POSITION, val);
-	if (err)
-		return err;
-
-	if (cnt != 0) {
+	if (val != 0) {
 		dev_warn(&ftm->pdev->dev, "Can only accept '0' as new counter value\n");
 		return -EINVAL;
 	}
diff --git a/drivers/counter/stm32-lptimer-cnt.c b/drivers/counter/stm32-lptimer-cnt.c
index bbc930a5962c..73bb773f5e6d 100644
--- a/drivers/counter/stm32-lptimer-cnt.c
+++ b/drivers/counter/stm32-lptimer-cnt.c
@@ -377,8 +377,7 @@ static enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
 };
 
 static int stm32_lptim_cnt_read(struct counter_device *counter,
-				struct counter_count *count,
-				struct counter_count_read_value *val)
+				struct counter_count *count, unsigned long *val)
 {
 	struct stm32_lptim_cnt *const priv = counter->priv;
 	u32 cnt;
@@ -388,7 +387,7 @@ static int stm32_lptim_cnt_read(struct counter_device *counter,
 	if (ret)
 		return ret;
 
-	counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &cnt);
+	*val = cnt;
 
 	return 0;
 }
diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c
index 644ba18a72ad..839083543323 100644
--- a/drivers/counter/stm32-timer-cnt.c
+++ b/drivers/counter/stm32-timer-cnt.c
@@ -48,34 +48,27 @@ static enum counter_count_function stm32_count_functions[] = {
 };
 
 static int stm32_count_read(struct counter_device *counter,
-			    struct counter_count *count,
-			    struct counter_count_read_value *val)
+			    struct counter_count *count, unsigned long *val)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
 	u32 cnt;
 
 	regmap_read(priv->regmap, TIM_CNT, &cnt);
-	counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &cnt);
+	*val = cnt;
 
 	return 0;
 }
 
 static int stm32_count_write(struct counter_device *counter,
 			     struct counter_count *count,
-			     struct counter_count_write_value *val)
+			     const unsigned long val)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
-	u32 cnt;
-	int err;
-
-	err = counter_count_write_value_get(&cnt, COUNTER_COUNT_POSITION, val);
-	if (err)
-		return err;
 
-	if (cnt > priv->ceiling)
+	if (val > priv->ceiling)
 		return -EINVAL;
 
-	return regmap_write(priv->regmap, TIM_CNT, cnt);
+	return regmap_write(priv->regmap, TIM_CNT, val);
 }
 
 static int stm32_count_function_get(struct counter_device *counter,
diff --git a/include/linux/counter.h b/include/linux/counter.h
index a061cdcdef7c..32fb4d8cc3fd 100644
--- a/include/linux/counter.h
+++ b/include/linux/counter.h
@@ -290,53 +290,22 @@ struct counter_device_state {
 	const struct attribute_group **groups;
 };
 
-/**
- * struct counter_signal_read_value - Opaque Signal read value
- * @buf:	string representation of Signal read value
- * @len:	length of string in @buf
- */
-struct counter_signal_read_value {
-	char *buf;
-	size_t len;
-};
-
-/**
- * struct counter_count_read_value - Opaque Count read value
- * @buf:	string representation of Count read value
- * @len:	length of string in @buf
- */
-struct counter_count_read_value {
-	char *buf;
-	size_t len;
-};
-
-/**
- * struct counter_count_write_value - Opaque Count write value
- * @buf:	string representation of Count write value
- */
-struct counter_count_write_value {
-	const char *buf;
+enum counter_signal_value {
+	COUNTER_SIGNAL_LOW = 0,
+	COUNTER_SIGNAL_HIGH
 };
 
 /**
  * struct counter_ops - Callbacks from driver
  * @signal_read:	optional read callback for Signal attribute. The read
  *			value of the respective Signal should be passed back via
- *			the val parameter. val points to an opaque type which
- *			should be set only by calling the
- *			counter_signal_read_value_set function from within the
- *			signal_read callback.
+ *			the val parameter.
  * @count_read:		optional read callback for Count attribute. The read
  *			value of the respective Count should be passed back via
- *			the val parameter. val points to an opaque type which
- *			should be set only by calling the
- *			counter_count_read_value_set function from within the
- *			count_read callback.
+ *			the val parameter.
  * @count_write:	optional write callback for Count attribute. The write
  *			value for the respective Count is passed in via the val
- *			parameter. val points to an opaque type which should be
- *			accessed only by calling the
- *			counter_count_write_value_get function.
+ *			parameter.
  * @function_get:	function to get the current count function mode. Returns
  *			0 on success and negative error code on error. The index
  *			of the respective Count's returned function mode should
@@ -355,13 +324,11 @@ struct counter_count_write_value {
 struct counter_ops {
 	int (*signal_read)(struct counter_device *counter,
 			   struct counter_signal *signal,
-			   struct counter_signal_read_value *val);
+			   enum counter_signal_value *val);
 	int (*count_read)(struct counter_device *counter,
-			  struct counter_count *count,
-			  struct counter_count_read_value *val);
+			  struct counter_count *count, unsigned long *val);
 	int (*count_write)(struct counter_device *counter,
-			   struct counter_count *count,
-			   struct counter_count_write_value *val);
+			   struct counter_count *count, unsigned long val);
 	int (*function_get)(struct counter_device *counter,
 			    struct counter_count *count, size_t *function);
 	int (*function_set)(struct counter_device *counter,
@@ -477,29 +444,6 @@ struct counter_device {
 	void *priv;
 };
 
-enum counter_signal_level {
-	COUNTER_SIGNAL_LEVEL_LOW = 0,
-	COUNTER_SIGNAL_LEVEL_HIGH
-};
-
-enum counter_signal_value_type {
-	COUNTER_SIGNAL_LEVEL = 0
-};
-
-enum counter_count_value_type {
-	COUNTER_COUNT_POSITION = 0,
-};
-
-void counter_signal_read_value_set(struct counter_signal_read_value *const val,
-				   const enum counter_signal_value_type type,
-				   void *const data);
-void counter_count_read_value_set(struct counter_count_read_value *const val,
-				  const enum counter_count_value_type type,
-				  void *const data);
-int counter_count_write_value_get(void *const data,
-				  const enum counter_count_value_type type,
-				  const struct counter_count_write_value *const val);
-
 int counter_register(struct counter_device *const counter);
 void counter_unregister(struct counter_device *const counter);
 int devm_counter_register(struct device *dev,
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v3 2/2] docs: driver-api: generic-counter: Update Count and Signal data types
  2019-09-18 14:22 [PATCH v3 0/2] Simplify count_read/count_write/signal_read William Breathitt Gray
  2019-09-18 14:22 ` [PATCH v3 1/2] counter: Simplify the count_read and count_write callbacks William Breathitt Gray
@ 2019-09-18 14:22 ` William Breathitt Gray
  2019-10-05 14:33 ` [PATCH v3 0/2] Simplify count_read/count_write/signal_read Jonathan Cameron
  2 siblings, 0 replies; 6+ messages in thread
From: William Breathitt Gray @ 2019-09-18 14:22 UTC (permalink / raw)
  To: jic23
  Cc: linux-kernel, linux-iio, patrick.havelange, fabrice.gasnier,
	mcoquelin.stm32, alexandre.torgue, linux-stm32, linux-arm-kernel,
	benjamin.gaignard, William Breathitt Gray

Count data is now always represented as an unsigned integer, while
Signal data is either SIGNAL_LOW or SIGNAL_HIGH.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 Documentation/driver-api/generic-counter.rst | 22 +++++++-------------
 1 file changed, 8 insertions(+), 14 deletions(-)

diff --git a/Documentation/driver-api/generic-counter.rst b/Documentation/driver-api/generic-counter.rst
index 8382f01a53e3..161652fc1025 100644
--- a/Documentation/driver-api/generic-counter.rst
+++ b/Documentation/driver-api/generic-counter.rst
@@ -39,10 +39,7 @@ There are three core components to a counter:
 COUNT
 -----
 A Count represents the count data for a set of Signals. The Generic
-Counter interface provides the following available count data types:
-
-* COUNT_POSITION:
-  Unsigned integer value representing position.
+Counter interface represents the count data as an unsigned integer.
 
 A Count has a count function mode which represents the update behavior
 for the count data. The Generic Counter interface provides the following
@@ -93,19 +90,16 @@ SIGNAL
 A Signal represents a counter input data; this is the input data that is
 evaluated by the counter to determine the count data; e.g. a quadrature
 signal output line of a rotary encoder. Not all counter devices provide
-user access to the Signal data.
-
-The Generic Counter interface provides the following available signal
-data types for when the Signal data is available for user access:
+user access to the Signal data, so exposure is optional for drivers.
 
-* SIGNAL_LEVEL:
-  Signal line state level. The following states are possible:
+When the Signal data is available for user access, the Generic Counter
+interface provides the following available signal values:
 
-  - SIGNAL_LEVEL_LOW:
-    Signal line is in a low state.
+* SIGNAL_LOW:
+  Signal line is in a low state.
 
-  - SIGNAL_LEVEL_HIGH:
-    Signal line is in a high state.
+* SIGNAL_HIGH:
+  Signal line is in a high state.
 
 A Signal may be associated with one or more Counts.
 
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH v3 0/2] Simplify count_read/count_write/signal_read
  2019-09-18 14:22 [PATCH v3 0/2] Simplify count_read/count_write/signal_read William Breathitt Gray
  2019-09-18 14:22 ` [PATCH v3 1/2] counter: Simplify the count_read and count_write callbacks William Breathitt Gray
  2019-09-18 14:22 ` [PATCH v3 2/2] docs: driver-api: generic-counter: Update Count and Signal data types William Breathitt Gray
@ 2019-10-05 14:33 ` Jonathan Cameron
  2019-10-05 17:19   ` William Breathitt Gray
  2 siblings, 1 reply; 6+ messages in thread
From: Jonathan Cameron @ 2019-10-05 14:33 UTC (permalink / raw)
  To: William Breathitt Gray
  Cc: linux-kernel, linux-iio, patrick.havelange, fabrice.gasnier,
	mcoquelin.stm32, alexandre.torgue, linux-stm32, linux-arm-kernel,
	benjamin.gaignard

Hi William,

This all makes sense to me.  Do you want to wait for some more reviews
or should I pick them up now through IIO?  We are really early in
the cycle so plenty of time, unless there are new drivers coming you
want to use these from the start.

Thanks,

Jonathan


On Wed, 18 Sep 2019 23:22:44 +0900
William Breathitt Gray <vilhelm.gray@gmail.com> wrote:

> Changes in v3:
>  - Squash code changes to single patch to avoid compilation error
> 
> The changes in this patchset will not affect the userspace interface.
> Rather, these changes are intended to simplify the kernelspace Counter
> callbacks for counter device driver authors.
> 
> The following main changes are proposed:
> 
> * Retire the opaque counter_count_read_value/counter_count_write_value
>   structures and simply represent count data as an unsigned integer.
> 
> * Retire the opaque counter_signal_read_value structure and represent
>   Signal data as a counter_signal_value enum.
> 
> These changes should reduce some complexity and code in the use and
> implementation of the count_read, count_write, and signal_read
> callbacks.
> 
> The opaque structures for Count data and Signal data were introduced
> originally in anticipation of supporting various representations of
> counter data (e.g. arbitrary-precision tallies, floating-point spherical
> coordinate positions, etc). However, with the counter device drivers
> that have appeared, it's become apparent that utilizing opaque
> structures in kernelspace is not the best approach to take.
> 
> I believe it is best to let userspace applications decide how to
> interpret the count data they receive. There are a couple of reasons why
> it would be good to do so:
> 
> * Users use their devices in unexpected ways.
> 
>   For example, a quadrature encoder counter device is typically used to
>   keep track of the position of a motor, but a user could set the device
>   in a pulse-direction mode and instead use it to count sporadic rising
>   edges from an arbitrary signal line unrelated to positioning. Users
>   should have the freedom to decide what their data represents.
> 
> * Most counter devices represent data as unsigned integers anyway.
> 
>   For example, whether the device is a tally counter or position
>   counter, the count data is represented to the user as an unsigned
>   integer value. So specifying that one device is representing tallies
>   while the other specifies positions does not provide much utility from
>   an interface perspective.
> 
> For these reasons, the count_read and count_write callbacks have been
> redefined to pass count data directly as unsigned long instead of passed
> via opaque structures:
> 
>         count_read(struct counter_device *counter,
>                    struct counter_count *count, unsigned long *val);
>         count_write(struct counter_device *counter,
>                     struct counter_count *count, unsigned long val);
> 
> Similarly, the signal_read is redefined to pass Signal data directly as
> a counter_signal_value enum instead of via an opaque structure:
> 
>         signal_read(struct counter_device *counter,
>                     struct counter_signal *signal,
>                     enum counter_signal_value *val);
> 
> The counter_signal_value enum is simply the counter_signal_level enum
> redefined to remove the references to the Signal data "level" data type.
> 
> William Breathitt Gray (2):
>   counter: Simplify the count_read and count_write callbacks
>   docs: driver-api: generic-counter: Update Count and Signal data types
> 
>  Documentation/driver-api/generic-counter.rst |  22 ++--
>  drivers/counter/104-quad-8.c                 |  33 ++----
>  drivers/counter/counter.c                    | 101 +++----------------
>  drivers/counter/ftm-quaddec.c                |  14 +--
>  drivers/counter/stm32-lptimer-cnt.c          |   5 +-
>  drivers/counter/stm32-timer-cnt.c            |  17 +---
>  include/linux/counter.h                      |  74 ++------------
>  7 files changed, 53 insertions(+), 213 deletions(-)
> 


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v3 0/2] Simplify count_read/count_write/signal_read
  2019-10-05 14:33 ` [PATCH v3 0/2] Simplify count_read/count_write/signal_read Jonathan Cameron
@ 2019-10-05 17:19   ` William Breathitt Gray
  2019-10-06  8:44     ` Jonathan Cameron
  0 siblings, 1 reply; 6+ messages in thread
From: William Breathitt Gray @ 2019-10-05 17:19 UTC (permalink / raw)
  To: Jonathan Cameron
  Cc: linux-kernel, linux-iio, patrick.havelange, fabrice.gasnier,
	mcoquelin.stm32, alexandre.torgue, linux-stm32, linux-arm-kernel,
	benjamin.gaignard, Fabien Lahoudere, David Lechner, Felipe Balbi

On Sat, Oct 05, 2019 at 03:33:08PM +0100, Jonathan Cameron wrote:
> Hi William,
> 
> This all makes sense to me.  Do you want to wait for some more reviews
> or should I pick them up now through IIO?  We are really early in
> the cycle so plenty of time, unless there are new drivers coming you
> want to use these from the start.
> 
> Thanks,
> 
> Jonathan

Getting this in sooner would be better since that will save Fabien from
having to introduce the COUNTER_COUNT_TALLY type in the cros_ec patch
submission.

The only concern left now is that the TI eQEP driver needs to be updated
as well for these changes, but it's not in the IIO testing branch yet.

Do you want to merge this patchset first, or wait until TI eQEP makes it
into the testing branch? Alternatively, I can merge the cros_ec patchset
and Intel QEP patchset into my personal repository when they are ready,
then later submit a git pull request to you with these changes if you
prefer that route.

William Breathitt Gray

> On Wed, 18 Sep 2019 23:22:44 +0900
> William Breathitt Gray <vilhelm.gray@gmail.com> wrote:
> 
> > Changes in v3:
> >  - Squash code changes to single patch to avoid compilation error
> > 
> > The changes in this patchset will not affect the userspace interface.
> > Rather, these changes are intended to simplify the kernelspace Counter
> > callbacks for counter device driver authors.
> > 
> > The following main changes are proposed:
> > 
> > * Retire the opaque counter_count_read_value/counter_count_write_value
> >   structures and simply represent count data as an unsigned integer.
> > 
> > * Retire the opaque counter_signal_read_value structure and represent
> >   Signal data as a counter_signal_value enum.
> > 
> > These changes should reduce some complexity and code in the use and
> > implementation of the count_read, count_write, and signal_read
> > callbacks.
> > 
> > The opaque structures for Count data and Signal data were introduced
> > originally in anticipation of supporting various representations of
> > counter data (e.g. arbitrary-precision tallies, floating-point spherical
> > coordinate positions, etc). However, with the counter device drivers
> > that have appeared, it's become apparent that utilizing opaque
> > structures in kernelspace is not the best approach to take.
> > 
> > I believe it is best to let userspace applications decide how to
> > interpret the count data they receive. There are a couple of reasons why
> > it would be good to do so:
> > 
> > * Users use their devices in unexpected ways.
> > 
> >   For example, a quadrature encoder counter device is typically used to
> >   keep track of the position of a motor, but a user could set the device
> >   in a pulse-direction mode and instead use it to count sporadic rising
> >   edges from an arbitrary signal line unrelated to positioning. Users
> >   should have the freedom to decide what their data represents.
> > 
> > * Most counter devices represent data as unsigned integers anyway.
> > 
> >   For example, whether the device is a tally counter or position
> >   counter, the count data is represented to the user as an unsigned
> >   integer value. So specifying that one device is representing tallies
> >   while the other specifies positions does not provide much utility from
> >   an interface perspective.
> > 
> > For these reasons, the count_read and count_write callbacks have been
> > redefined to pass count data directly as unsigned long instead of passed
> > via opaque structures:
> > 
> >         count_read(struct counter_device *counter,
> >                    struct counter_count *count, unsigned long *val);
> >         count_write(struct counter_device *counter,
> >                     struct counter_count *count, unsigned long val);
> > 
> > Similarly, the signal_read is redefined to pass Signal data directly as
> > a counter_signal_value enum instead of via an opaque structure:
> > 
> >         signal_read(struct counter_device *counter,
> >                     struct counter_signal *signal,
> >                     enum counter_signal_value *val);
> > 
> > The counter_signal_value enum is simply the counter_signal_level enum
> > redefined to remove the references to the Signal data "level" data type.
> > 
> > William Breathitt Gray (2):
> >   counter: Simplify the count_read and count_write callbacks
> >   docs: driver-api: generic-counter: Update Count and Signal data types
> > 
> >  Documentation/driver-api/generic-counter.rst |  22 ++--
> >  drivers/counter/104-quad-8.c                 |  33 ++----
> >  drivers/counter/counter.c                    | 101 +++----------------
> >  drivers/counter/ftm-quaddec.c                |  14 +--
> >  drivers/counter/stm32-lptimer-cnt.c          |   5 +-
> >  drivers/counter/stm32-timer-cnt.c            |  17 +---
> >  include/linux/counter.h                      |  74 ++------------
> >  7 files changed, 53 insertions(+), 213 deletions(-)
> > 
> 

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v3 0/2] Simplify count_read/count_write/signal_read
  2019-10-05 17:19   ` William Breathitt Gray
@ 2019-10-06  8:44     ` Jonathan Cameron
  0 siblings, 0 replies; 6+ messages in thread
From: Jonathan Cameron @ 2019-10-06  8:44 UTC (permalink / raw)
  To: William Breathitt Gray
  Cc: linux-kernel, linux-iio, patrick.havelange, fabrice.gasnier,
	mcoquelin.stm32, alexandre.torgue, linux-stm32, linux-arm-kernel,
	benjamin.gaignard, Fabien Lahoudere, David Lechner, Felipe Balbi

On Sat, 5 Oct 2019 13:19:38 -0400
William Breathitt Gray <vilhelm.gray@gmail.com> wrote:

> On Sat, Oct 05, 2019 at 03:33:08PM +0100, Jonathan Cameron wrote:
> > Hi William,
> > 
> > This all makes sense to me.  Do you want to wait for some more reviews
> > or should I pick them up now through IIO?  We are really early in
> > the cycle so plenty of time, unless there are new drivers coming you
> > want to use these from the start.
> > 
> > Thanks,
> > 
> > Jonathan  
> 
> Getting this in sooner would be better since that will save Fabien from
> having to introduce the COUNTER_COUNT_TALLY type in the cros_ec patch
> submission.
> 
> The only concern left now is that the TI eQEP driver needs to be updated
> as well for these changes, but it's not in the IIO testing branch yet.
> 
> Do you want to merge this patchset first, or wait until TI eQEP makes it
> into the testing branch? Alternatively, I can merge the cros_ec patchset
> and Intel QEP patchset into my personal repository when they are ready,
> then later submit a git pull request to you with these changes if you
> prefer that route.

OK, so I need to do a pull request to be able to move the testing branch
to the point where I can do the immutable branch needed for that TI set.
Should do that later this week. So I'll take the TI eQEP series at that
point. If you want to prep a version of this that includes this driver
that would be great.  Should be able to pull both in next weekend at
the latest.  If it takes a bit longer for you to be ready, no problem!

Thanks,

Jonathan



> 
> William Breathitt Gray
> 
> > On Wed, 18 Sep 2019 23:22:44 +0900
> > William Breathitt Gray <vilhelm.gray@gmail.com> wrote:
> >   
> > > Changes in v3:
> > >  - Squash code changes to single patch to avoid compilation error
> > > 
> > > The changes in this patchset will not affect the userspace interface.
> > > Rather, these changes are intended to simplify the kernelspace Counter
> > > callbacks for counter device driver authors.
> > > 
> > > The following main changes are proposed:
> > > 
> > > * Retire the opaque counter_count_read_value/counter_count_write_value
> > >   structures and simply represent count data as an unsigned integer.
> > > 
> > > * Retire the opaque counter_signal_read_value structure and represent
> > >   Signal data as a counter_signal_value enum.
> > > 
> > > These changes should reduce some complexity and code in the use and
> > > implementation of the count_read, count_write, and signal_read
> > > callbacks.
> > > 
> > > The opaque structures for Count data and Signal data were introduced
> > > originally in anticipation of supporting various representations of
> > > counter data (e.g. arbitrary-precision tallies, floating-point spherical
> > > coordinate positions, etc). However, with the counter device drivers
> > > that have appeared, it's become apparent that utilizing opaque
> > > structures in kernelspace is not the best approach to take.
> > > 
> > > I believe it is best to let userspace applications decide how to
> > > interpret the count data they receive. There are a couple of reasons why
> > > it would be good to do so:
> > > 
> > > * Users use their devices in unexpected ways.
> > > 
> > >   For example, a quadrature encoder counter device is typically used to
> > >   keep track of the position of a motor, but a user could set the device
> > >   in a pulse-direction mode and instead use it to count sporadic rising
> > >   edges from an arbitrary signal line unrelated to positioning. Users
> > >   should have the freedom to decide what their data represents.
> > > 
> > > * Most counter devices represent data as unsigned integers anyway.
> > > 
> > >   For example, whether the device is a tally counter or position
> > >   counter, the count data is represented to the user as an unsigned
> > >   integer value. So specifying that one device is representing tallies
> > >   while the other specifies positions does not provide much utility from
> > >   an interface perspective.
> > > 
> > > For these reasons, the count_read and count_write callbacks have been
> > > redefined to pass count data directly as unsigned long instead of passed
> > > via opaque structures:
> > > 
> > >         count_read(struct counter_device *counter,
> > >                    struct counter_count *count, unsigned long *val);
> > >         count_write(struct counter_device *counter,
> > >                     struct counter_count *count, unsigned long val);
> > > 
> > > Similarly, the signal_read is redefined to pass Signal data directly as
> > > a counter_signal_value enum instead of via an opaque structure:
> > > 
> > >         signal_read(struct counter_device *counter,
> > >                     struct counter_signal *signal,
> > >                     enum counter_signal_value *val);
> > > 
> > > The counter_signal_value enum is simply the counter_signal_level enum
> > > redefined to remove the references to the Signal data "level" data type.
> > > 
> > > William Breathitt Gray (2):
> > >   counter: Simplify the count_read and count_write callbacks
> > >   docs: driver-api: generic-counter: Update Count and Signal data types
> > > 
> > >  Documentation/driver-api/generic-counter.rst |  22 ++--
> > >  drivers/counter/104-quad-8.c                 |  33 ++----
> > >  drivers/counter/counter.c                    | 101 +++----------------
> > >  drivers/counter/ftm-quaddec.c                |  14 +--
> > >  drivers/counter/stm32-lptimer-cnt.c          |   5 +-
> > >  drivers/counter/stm32-timer-cnt.c            |  17 +---
> > >  include/linux/counter.h                      |  74 ++------------
> > >  7 files changed, 53 insertions(+), 213 deletions(-)
> > >   
> >   


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2019-10-06  8:44 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-18 14:22 [PATCH v3 0/2] Simplify count_read/count_write/signal_read William Breathitt Gray
2019-09-18 14:22 ` [PATCH v3 1/2] counter: Simplify the count_read and count_write callbacks William Breathitt Gray
2019-09-18 14:22 ` [PATCH v3 2/2] docs: driver-api: generic-counter: Update Count and Signal data types William Breathitt Gray
2019-10-05 14:33 ` [PATCH v3 0/2] Simplify count_read/count_write/signal_read Jonathan Cameron
2019-10-05 17:19   ` William Breathitt Gray
2019-10-06  8:44     ` Jonathan Cameron

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).