* [PATCH] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml
@ 2020-08-10 3:37 Chris Ruehl
2020-08-16 9:27 ` Jonathan Cameron
2020-08-24 22:28 ` Rob Herring
0 siblings, 2 replies; 5+ messages in thread
From: Chris Ruehl @ 2020-08-10 3:37 UTC (permalink / raw)
To: Chris Ruehl
Cc: devicetree, Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
Peter Meerwald-Stadler, Rob Herring, Uwe Kleine-König,
Michael Hennerich, linux-iio, linux-kernel
Conversion of the ltc2632 to yaml format and name the file to
'lltc,ltc2632.yaml'.
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
v6:
Remove tab and drop unused label
Related patches already in linux-next.
[PATCH v5 1/3] iio: documentation ltc2632_chip_info add num_channels
linux-next commit: 6f1c9e0da9aae51177457731357ae8a2c8af27cd
PATCH v5 2/3] iio: DAC extension for ltc2634-12/10/8
linux-next commit: aefa5bc87c808dd08db2fc79ebdbf19ed4af7be2
.../bindings/iio/dac/lltc,ltc2632.yaml | 77 +++++++++++++++++++
.../devicetree/bindings/iio/dac/ltc2632.txt | 49 ------------
2 files changed, 77 insertions(+), 49 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/dac/ltc2632.txt
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
new file mode 100644
index 000000000000..edf804d0aca2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
+
+maintainers:
+ - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+ Bindings for the Linear Technology LTC2632/2634/2636 DAC
+ Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf
+
+properties:
+ compatible:
+ enum:
+ - lltc,ltc2632-l12
+ - lltc,ltc2632-l10
+ - lltc,ltc2632-l8
+ - lltc,ltc2632-h12
+ - lltc,ltc2632-h10
+ - lltc,ltc2632-h8
+ - lltc,ltc2634-l12
+ - lltc,ltc2634-l10
+ - lltc,ltc2634-l8
+ - lltc,ltc2634-h12
+ - lltc,ltc2634-h10
+ - lltc,ltc2634-h8
+ - lltc,ltc2636-l12
+ - lltc,ltc2636-l10
+ - lltc,ltc2636-l8
+ - lltc,ltc2636-h12
+ - lltc,ltc2636-h10
+ - lltc,ltc2636-h8
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 2000000
+
+ vref-supply:
+ description:
+ Phandle to the external reference voltage supply. This should
+ only be set if there is an external reference voltage connected to the VREF
+ pin. If the property is not set the internal reference is used.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ vref: regulator-vref {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-ltc2632";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ };
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dac@0 {
+ compatible = "lltc,ltc2632";
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1000000>;
+ vref-supply = <&vref>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
deleted file mode 100644
index 1ab9570cf219..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Linear Technology LTC2632/2634/2636 DAC
-
-Required properties:
- - compatible: Has to contain one of the following:
- lltc,ltc2632-l12
- lltc,ltc2632-l10
- lltc,ltc2632-l8
- lltc,ltc2632-h12
- lltc,ltc2632-h10
- lltc,ltc2632-h8
- lltc,ltc2634-l12
- lltc,ltc2634-l10
- lltc,ltc2634-l8
- lltc,ltc2634-h12
- lltc,ltc2634-h10
- lltc,ltc2634-h8
- lltc,ltc2636-l12
- lltc,ltc2636-l10
- lltc,ltc2636-l8
- lltc,ltc2636-h12
- lltc,ltc2636-h10
- lltc,ltc2636-h8
-
-Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
-apply. In particular, "reg" and "spi-max-frequency" properties must be given.
-
-Optional properties:
- - vref-supply: Phandle to the external reference voltage supply. This should
- only be set if there is an external reference voltage connected to the VREF
- pin. If the property is not set the internal reference is used.
-
-Example:
-
- vref: regulator-vref {
- compatible = "regulator-fixed";
- regulator-name = "vref-ltc2632";
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-always-on;
- };
-
- spi_master {
- dac: ltc2632@0 {
- compatible = "lltc,ltc2632-l12";
- reg = <0>; /* CS0 */
- spi-max-frequency = <1000000>;
- vref-supply = <&vref>; /* optional */
- };
- };
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml
2020-08-10 3:37 [PATCH] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml Chris Ruehl
@ 2020-08-16 9:27 ` Jonathan Cameron
2020-08-18 0:19 ` Chris Ruehl
2020-08-24 22:28 ` Rob Herring
2020-08-24 22:28 ` Rob Herring
1 sibling, 2 replies; 5+ messages in thread
From: Jonathan Cameron @ 2020-08-16 9:27 UTC (permalink / raw)
To: Chris Ruehl
Cc: devicetree, Hartmut Knaack, Lars-Peter Clausen,
Peter Meerwald-Stadler, Rob Herring, Uwe Kleine-König,
Michael Hennerich, linux-iio, linux-kernel
On Mon, 10 Aug 2020 11:37:52 +0800
Chris Ruehl <chris.ruehl@gtsys.com.hk> wrote:
Hi Chris,
This will need a dt-binding maintainer review, but in the meantime...
Look at the title for dt-bindings patches and match that format.
One question for Rob inline. A quick grep suggests we are
very inconsistent on whether we use the multiline block
thing for description fields or not.
Is it needed?
> Conversion of the ltc2632 to yaml format and name the file to
> 'lltc,ltc2632.yaml'.
>
> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
> ---
> v6:
> Remove tab and drop unused label
> Related patches already in linux-next.
> [PATCH v5 1/3] iio: documentation ltc2632_chip_info add num_channels
> linux-next commit: 6f1c9e0da9aae51177457731357ae8a2c8af27cd
> PATCH v5 2/3] iio: DAC extension for ltc2634-12/10/8
> linux-next commit: aefa5bc87c808dd08db2fc79ebdbf19ed4af7be2
>
> .../bindings/iio/dac/lltc,ltc2632.yaml | 77 +++++++++++++++++++
> .../devicetree/bindings/iio/dac/ltc2632.txt | 49 ------------
> 2 files changed, 77 insertions(+), 49 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
> delete mode 100644 Documentation/devicetree/bindings/iio/dac/ltc2632.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
> new file mode 100644
> index 000000000000..edf804d0aca2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
> +
> +maintainers:
> + - Michael Hennerich <michael.hennerich@analog.com>
> +
> +description: |
> + Bindings for the Linear Technology LTC2632/2634/2636 DAC
> + Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf
> +
> +properties:
> + compatible:
> + enum:
> + - lltc,ltc2632-l12
> + - lltc,ltc2632-l10
> + - lltc,ltc2632-l8
> + - lltc,ltc2632-h12
> + - lltc,ltc2632-h10
> + - lltc,ltc2632-h8
> + - lltc,ltc2634-l12
> + - lltc,ltc2634-l10
> + - lltc,ltc2634-l8
> + - lltc,ltc2634-h12
> + - lltc,ltc2634-h10
> + - lltc,ltc2634-h8
> + - lltc,ltc2636-l12
> + - lltc,ltc2636-l10
> + - lltc,ltc2636-l8
> + - lltc,ltc2636-h12
> + - lltc,ltc2636-h10
> + - lltc,ltc2636-h8
> +
> + reg:
> + maxItems: 1
> +
> + spi-max-frequency:
> + maximum: 2000000
> +
> + vref-supply:
> + description:
Does this need a | ?
> + Phandle to the external reference voltage supply. This should
> + only be set if there is an external reference voltage connected to the VREF
> + pin. If the property is not set the internal reference is used.
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + vref: regulator-vref {
> + compatible = "regulator-fixed";
> + regulator-name = "vref-ltc2632";
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-always-on;
> + };
> +
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dac@0 {
> + compatible = "lltc,ltc2632";
> + reg = <0>; /* CS0 */
> + spi-max-frequency = <1000000>;
> + vref-supply = <&vref>;
> + };
> + };
> +...
> diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
> deleted file mode 100644
> index 1ab9570cf219..000000000000
> --- a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
> +++ /dev/null
> @@ -1,49 +0,0 @@
> -Linear Technology LTC2632/2634/2636 DAC
> -
> -Required properties:
> - - compatible: Has to contain one of the following:
> - lltc,ltc2632-l12
> - lltc,ltc2632-l10
> - lltc,ltc2632-l8
> - lltc,ltc2632-h12
> - lltc,ltc2632-h10
> - lltc,ltc2632-h8
> - lltc,ltc2634-l12
> - lltc,ltc2634-l10
> - lltc,ltc2634-l8
> - lltc,ltc2634-h12
> - lltc,ltc2634-h10
> - lltc,ltc2634-h8
> - lltc,ltc2636-l12
> - lltc,ltc2636-l10
> - lltc,ltc2636-l8
> - lltc,ltc2636-h12
> - lltc,ltc2636-h10
> - lltc,ltc2636-h8
> -
> -Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
> -apply. In particular, "reg" and "spi-max-frequency" properties must be given.
> -
> -Optional properties:
> - - vref-supply: Phandle to the external reference voltage supply. This should
> - only be set if there is an external reference voltage connected to the VREF
> - pin. If the property is not set the internal reference is used.
> -
> -Example:
> -
> - vref: regulator-vref {
> - compatible = "regulator-fixed";
> - regulator-name = "vref-ltc2632";
> - regulator-min-microvolt = <1250000>;
> - regulator-max-microvolt = <1250000>;
> - regulator-always-on;
> - };
> -
> - spi_master {
> - dac: ltc2632@0 {
> - compatible = "lltc,ltc2632-l12";
> - reg = <0>; /* CS0 */
> - spi-max-frequency = <1000000>;
> - vref-supply = <&vref>; /* optional */
> - };
> - };
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml
2020-08-16 9:27 ` Jonathan Cameron
@ 2020-08-18 0:19 ` Chris Ruehl
2020-08-24 22:28 ` Rob Herring
1 sibling, 0 replies; 5+ messages in thread
From: Chris Ruehl @ 2020-08-18 0:19 UTC (permalink / raw)
To: Jonathan Cameron
Cc: devicetree, Hartmut Knaack, Lars-Peter Clausen,
Peter Meerwald-Stadler, Rob Herring, Uwe Kleine-König,
Michael Hennerich, linux-iio, linux-kernel
Hi Jonathan
On 16/8/2020 5:27 pm, Jonathan Cameron wrote:
> On Mon, 10 Aug 2020 11:37:52 +0800
> Chris Ruehl <chris.ruehl@gtsys.com.hk> wrote:
>
> Hi Chris,
>
> This will need a dt-binding maintainer review, but in the meantime...
>
> Look at the title for dt-bindings patches and match that format.
>
> One question for Rob inline. A quick grep suggests we are
> very inconsistent on whether we use the multiline block
> thing for description fields or not.
>
> Is it needed?
ok, next submit [PATCH] dt-bindings: iio/dac: ...
just wait for Rob and his advice on your question regarding the | in the
block.
Regards
Chris
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml
2020-08-16 9:27 ` Jonathan Cameron
2020-08-18 0:19 ` Chris Ruehl
@ 2020-08-24 22:28 ` Rob Herring
1 sibling, 0 replies; 5+ messages in thread
From: Rob Herring @ 2020-08-24 22:28 UTC (permalink / raw)
To: Jonathan Cameron
Cc: Chris Ruehl, devicetree, Hartmut Knaack, Lars-Peter Clausen,
Peter Meerwald-Stadler, Uwe Kleine-König, Michael Hennerich,
linux-iio, linux-kernel
On Sun, Aug 16, 2020 at 10:27:33AM +0100, Jonathan Cameron wrote:
> On Mon, 10 Aug 2020 11:37:52 +0800
> Chris Ruehl <chris.ruehl@gtsys.com.hk> wrote:
>
> Hi Chris,
>
> This will need a dt-binding maintainer review, but in the meantime...
>
> Look at the title for dt-bindings patches and match that format.
>
> One question for Rob inline. A quick grep suggests we are
> very inconsistent on whether we use the multiline block
> thing for description fields or not.
>
> Is it needed?
>
> > Conversion of the ltc2632 to yaml format and name the file to
> > 'lltc,ltc2632.yaml'.
> >
> > Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
> > ---
> > v6:
> > Remove tab and drop unused label
> > Related patches already in linux-next.
> > [PATCH v5 1/3] iio: documentation ltc2632_chip_info add num_channels
> > linux-next commit: 6f1c9e0da9aae51177457731357ae8a2c8af27cd
> > PATCH v5 2/3] iio: DAC extension for ltc2634-12/10/8
> > linux-next commit: aefa5bc87c808dd08db2fc79ebdbf19ed4af7be2
> >
> > .../bindings/iio/dac/lltc,ltc2632.yaml | 77 +++++++++++++++++++
> > .../devicetree/bindings/iio/dac/ltc2632.txt | 49 ------------
> > 2 files changed, 77 insertions(+), 49 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
> > delete mode 100644 Documentation/devicetree/bindings/iio/dac/ltc2632.txt
> >
> > diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
> > new file mode 100644
> > index 000000000000..edf804d0aca2
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
> > @@ -0,0 +1,77 @@
> > +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
> > +
> > +maintainers:
> > + - Michael Hennerich <michael.hennerich@analog.com>
> > +
> > +description: |
> > + Bindings for the Linear Technology LTC2632/2634/2636 DAC
> > + Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - lltc,ltc2632-l12
> > + - lltc,ltc2632-l10
> > + - lltc,ltc2632-l8
> > + - lltc,ltc2632-h12
> > + - lltc,ltc2632-h10
> > + - lltc,ltc2632-h8
> > + - lltc,ltc2634-l12
> > + - lltc,ltc2634-l10
> > + - lltc,ltc2634-l8
> > + - lltc,ltc2634-h12
> > + - lltc,ltc2634-h10
> > + - lltc,ltc2634-h8
> > + - lltc,ltc2636-l12
> > + - lltc,ltc2636-l10
> > + - lltc,ltc2636-l8
> > + - lltc,ltc2636-h12
> > + - lltc,ltc2636-h10
> > + - lltc,ltc2636-h8
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + spi-max-frequency:
> > + maximum: 2000000
> > +
> > + vref-supply:
> > + description:
> Does this need a | ?
No. Only needed if you want to preserve line breaks and other
formatting.
> > + Phandle to the external reference voltage supply. This should
> > + only be set if there is an external reference voltage connected to the VREF
> > + pin. If the property is not set the internal reference is used.
> > +
> > +required:
> > + - compatible
> > + - reg
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + vref: regulator-vref {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vref-ltc2632";
> > + regulator-min-microvolt = <1250000>;
> > + regulator-max-microvolt = <1250000>;
> > + regulator-always-on;
> > + };
> > +
> > + spi {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + dac@0 {
> > + compatible = "lltc,ltc2632";
> > + reg = <0>; /* CS0 */
> > + spi-max-frequency = <1000000>;
> > + vref-supply = <&vref>;
> > + };
> > + };
> > +...
> > diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
> > deleted file mode 100644
> > index 1ab9570cf219..000000000000
> > --- a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
> > +++ /dev/null
> > @@ -1,49 +0,0 @@
> > -Linear Technology LTC2632/2634/2636 DAC
> > -
> > -Required properties:
> > - - compatible: Has to contain one of the following:
> > - lltc,ltc2632-l12
> > - lltc,ltc2632-l10
> > - lltc,ltc2632-l8
> > - lltc,ltc2632-h12
> > - lltc,ltc2632-h10
> > - lltc,ltc2632-h8
> > - lltc,ltc2634-l12
> > - lltc,ltc2634-l10
> > - lltc,ltc2634-l8
> > - lltc,ltc2634-h12
> > - lltc,ltc2634-h10
> > - lltc,ltc2634-h8
> > - lltc,ltc2636-l12
> > - lltc,ltc2636-l10
> > - lltc,ltc2636-l8
> > - lltc,ltc2636-h12
> > - lltc,ltc2636-h10
> > - lltc,ltc2636-h8
> > -
> > -Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
> > -apply. In particular, "reg" and "spi-max-frequency" properties must be given.
> > -
> > -Optional properties:
> > - - vref-supply: Phandle to the external reference voltage supply. This should
> > - only be set if there is an external reference voltage connected to the VREF
> > - pin. If the property is not set the internal reference is used.
> > -
> > -Example:
> > -
> > - vref: regulator-vref {
> > - compatible = "regulator-fixed";
> > - regulator-name = "vref-ltc2632";
> > - regulator-min-microvolt = <1250000>;
> > - regulator-max-microvolt = <1250000>;
> > - regulator-always-on;
> > - };
> > -
> > - spi_master {
> > - dac: ltc2632@0 {
> > - compatible = "lltc,ltc2632-l12";
> > - reg = <0>; /* CS0 */
> > - spi-max-frequency = <1000000>;
> > - vref-supply = <&vref>; /* optional */
> > - };
> > - };
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml
2020-08-10 3:37 [PATCH] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml Chris Ruehl
2020-08-16 9:27 ` Jonathan Cameron
@ 2020-08-24 22:28 ` Rob Herring
1 sibling, 0 replies; 5+ messages in thread
From: Rob Herring @ 2020-08-24 22:28 UTC (permalink / raw)
To: Chris Ruehl
Cc: Hartmut Knaack, linux-iio, Lars-Peter Clausen,
Uwe Kleine-König, Jonathan Cameron, devicetree,
linux-kernel, Michael Hennerich, Rob Herring,
Peter Meerwald-Stadler
On Mon, 10 Aug 2020 11:37:52 +0800, Chris Ruehl wrote:
> Conversion of the ltc2632 to yaml format and name the file to
> 'lltc,ltc2632.yaml'.
>
> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
> ---
> v6:
> Remove tab and drop unused label
> Related patches already in linux-next.
> [PATCH v5 1/3] iio: documentation ltc2632_chip_info add num_channels
> linux-next commit: 6f1c9e0da9aae51177457731357ae8a2c8af27cd
> PATCH v5 2/3] iio: DAC extension for ltc2634-12/10/8
> linux-next commit: aefa5bc87c808dd08db2fc79ebdbf19ed4af7be2
>
> .../bindings/iio/dac/lltc,ltc2632.yaml | 77 +++++++++++++++++++
> .../devicetree/bindings/iio/dac/ltc2632.txt | 49 ------------
> 2 files changed, 77 insertions(+), 49 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
> delete mode 100644 Documentation/devicetree/bindings/iio/dac/ltc2632.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-08-24 22:28 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-10 3:37 [PATCH] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml Chris Ruehl
2020-08-16 9:27 ` Jonathan Cameron
2020-08-18 0:19 ` Chris Ruehl
2020-08-24 22:28 ` Rob Herring
2020-08-24 22:28 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).