From: Lorenzo Bianconi <lorenzo@kernel.org>
To: jic23@kernel.org
Cc: lorenzo.bianconi@redhat.com, linux-iio@vger.kernel.org,
martin.kepplinger@puri.sm
Subject: [PATCH v2 4/4] iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings
Date: Mon, 29 Jul 2019 21:22:31 +0200 [thread overview]
Message-ID: <f4adc084ad92c1c31c2ed9cc748321c29e457c1c.1564427804.git.lorenzo@kernel.org> (raw)
In-Reply-To: <cover.1564427804.git.lorenzo@kernel.org>
Move IIO channel definitions in st_lsm6dsx_sensor_settings in order to
support sensors with different channels maps.
This is a preliminary patch to add support for LSM9DS1 sensor to
st_lsm6dsx driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 5 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 96 ++++++++++++++++----
2 files changed, 81 insertions(+), 20 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index ab1c66615d67..5090f1b3525a 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -200,6 +200,7 @@ struct st_lsm6dsx_ext_dev_settings {
* @wai: Sensor WhoAmI default value.
* @max_fifo_size: Sensor max fifo length in FIFO words.
* @id: List of hw id/device name supported by the driver configuration.
+ * @channels: IIO channels supported by the device.
* @odr_table: Hw sensors odr table (Hz + val).
* @fs_table: Hw sensors gain table (gain + val).
* @decimator: List of decimator register info (addr + mask).
@@ -215,6 +216,10 @@ struct st_lsm6dsx_settings {
enum st_lsm6dsx_hw_id hw_id;
const char *name;
} id[ST_LSM6DSX_MAX_ID];
+ struct {
+ const struct iio_chan_spec *chan;
+ int len;
+ } channels[2];
struct st_lsm6dsx_odr_table_entry odr_table[2];
struct st_lsm6dsx_fs_table_entry fs_table[2];
struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 0abd5b85b398..fc4d18b58c97 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -61,6 +61,20 @@
#define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR 0x13
#define ST_LSM6DSX_REG_INT2_ON_INT1_MASK BIT(5)
+static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
+ ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
+ ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
+ ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
+ ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x22, IIO_MOD_X, 0),
+ ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x24, IIO_MOD_Y, 1),
+ ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x26, IIO_MOD_Z, 2),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
{
.wai = 0x69,
@@ -71,6 +85,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DS3_DEV_NAME,
},
},
+ .channels = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .chan = st_lsm6dsx_acc_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .chan = st_lsm6dsx_gyro_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+ },
+ },
.odr_table = {
[ST_LSM6DSX_ID_ACC] = {
.reg = {
@@ -169,6 +193,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DS3H_DEV_NAME,
},
},
+ .channels = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .chan = st_lsm6dsx_acc_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .chan = st_lsm6dsx_gyro_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+ },
+ },
.odr_table = {
[ST_LSM6DSX_ID_ACC] = {
.reg = {
@@ -276,6 +310,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DS3TRC_DEV_NAME,
},
},
+ .channels = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .chan = st_lsm6dsx_acc_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .chan = st_lsm6dsx_gyro_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+ },
+ },
.odr_table = {
[ST_LSM6DSX_ID_ACC] = {
.reg = {
@@ -377,6 +421,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DSOX_DEV_NAME,
},
},
+ .channels = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .chan = st_lsm6dsx_acc_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .chan = st_lsm6dsx_gyro_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+ },
+ },
.odr_table = {
[ST_LSM6DSX_ID_ACC] = {
.reg = {
@@ -493,6 +547,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_ASM330LHH_DEV_NAME,
},
},
+ .channels = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .chan = st_lsm6dsx_acc_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .chan = st_lsm6dsx_gyro_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+ },
+ },
.odr_table = {
[ST_LSM6DSX_ID_ACC] = {
.reg = {
@@ -583,6 +647,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DSR_DEV_NAME,
},
},
+ .channels = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .chan = st_lsm6dsx_acc_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .chan = st_lsm6dsx_gyro_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+ },
+ },
.odr_table = {
[ST_LSM6DSX_ID_ACC] = {
.reg = {
@@ -692,20 +766,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
};
-static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
- ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
- ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
- ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
- IIO_CHAN_SOFT_TIMESTAMP(3),
-};
-
-static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
- ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x22, IIO_MOD_X, 0),
- ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x24, IIO_MOD_Y, 1),
- ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x26, IIO_MOD_Z, 2),
- IIO_CHAN_SOFT_TIMESTAMP(3),
-};
-
int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
@@ -1263,6 +1323,8 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
iio_dev->modes = INDIO_DIRECT_MODE;
iio_dev->dev.parent = hw->dev;
iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks;
+ iio_dev->channels = hw->settings->channels[id].chan;
+ iio_dev->num_channels = hw->settings->channels[id].len;
sensor = iio_priv(iio_dev);
sensor->id = id;
@@ -1273,18 +1335,12 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
switch (id) {
case ST_LSM6DSX_ID_ACC:
- iio_dev->channels = st_lsm6dsx_acc_channels;
- iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_acc_channels);
iio_dev->info = &st_lsm6dsx_acc_info;
-
scnprintf(sensor->name, sizeof(sensor->name), "%s_accel",
name);
break;
case ST_LSM6DSX_ID_GYRO:
- iio_dev->channels = st_lsm6dsx_gyro_channels;
- iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_gyro_channels);
iio_dev->info = &st_lsm6dsx_gyro_info;
-
scnprintf(sensor->name, sizeof(sensor->name), "%s_gyro",
name);
break;
--
2.21.0
next prev parent reply other threads:[~2019-07-29 19:23 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-29 19:22 [PATCH v2 0/4] st_lsm6dsx: move {odr,fs}_table in Lorenzo Bianconi
2019-07-29 19:22 ` [PATCH v2 1/4] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings Lorenzo Bianconi
2019-08-05 14:17 ` Jonathan Cameron
2019-07-29 19:22 ` [PATCH v2 2/4] iio: imu: st_lsm6dsx: move fs_table " Lorenzo Bianconi
2019-08-05 14:18 ` Jonathan Cameron
2019-07-29 19:22 ` [PATCH v2 3/4] iio: imu: st_lsm6dsx: inline output acc/gyro output regs Lorenzo Bianconi
2019-08-02 5:35 ` Martin Kepplinger
2019-08-05 14:18 ` Jonathan Cameron
2019-07-29 19:22 ` Lorenzo Bianconi [this message]
2019-08-02 5:36 ` [PATCH v2 4/4] iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings Martin Kepplinger
2019-08-05 14:19 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f4adc084ad92c1c31c2ed9cc748321c29e457c1c.1564427804.git.lorenzo@kernel.org \
--to=lorenzo@kernel.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=martin.kepplinger@puri.sm \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).