From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sanjeev Premi Subject: [PATCH 3/3] omap3evm: Configure GPIO175 for touchscreen PEN_IRQ Date: Fri, 5 Feb 2010 14:14:12 +0530 Message-ID: <1265359452-18718-1-git-send-email-premi@ti.com> Return-path: Sender: linux-omap-owner@vger.kernel.org To: linux-omap@vger.kernel.org, linux-input@vger.kernel.org Cc: Sanjeev Premi List-Id: linux-input@vger.kernel.org GPIO175 is used for PEN_IRQ on the EVM. This patch sets the mux settings for the same. Signed-off-by: Sanjeev Premi --- arch/arm/mach-omap2/board-omap3evm.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c8e1208..00bfe9b 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -430,7 +430,9 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), - + OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | + OMAP_PIN_OFF_INPUT_PULLUP | + OMAP_PIN_OFF_WAKEUPENABLE), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else -- 1.6.2.2