From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Marc Zyngier" Subject: Re: Using PXA arm board with MAX7319 GPIO expander input Date: Tue, 9 Feb 2010 10:22:58 -0000 (GMT) Message-ID: <1a3edf73aeae353342a4a082b4803bd9.squirrel@www.loen.fr> References: <20100208113306.GN9007@buzzloop.caiaq.de> <6a1db73cb6c89001764393acd766f2ba.squirrel@www.loen.fr> <20100209073903.4d8a00e4@taxman.wild-wind.fr.eu.org> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Return-path: Received: from inca-roads.misterjones.org ([213.251.177.50]:47339 "EHLO inca-roads.misterjones.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751604Ab0BIKXF (ORCPT ); Tue, 9 Feb 2010 05:23:05 -0500 In-Reply-To: Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: Eric Miao Cc: Daniel Mack , Jebediah Huang , linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org On Tue, February 9, 2010 08:19, Eric Miao wrote: > That sounds like a good news. I'm seeing your previous implementation > of interrupt support on pca953x as a good one, so probably would be > good to follow that, and not sure Jebediah Huang can have this tested :-) It will probably take a while before I have access to my PXA boards again (currently moving), but unless someone beats me to it, I'll probably give it a go in a few weeks. Provided that I can source the hardware, of course... :-) M. -- And if you don't know where you're going, any road will take you there...