Re: [PATCH v2] Input: ad7879: support auxiliary GPIOs via gpiolib

[Dmitry Torokhov <dmitry.torokhov@gmail.com>]

Hi Mike,

On Tue, Jan 12, 2010 at 04:04:57PM -0500, Mike Frysinger wrote:
> +
> +		err = gpiochip_add(&ts->gc);
> +		if (err)
> +			dev_err(&bus->dev, "failed to register gpio %d\n",
> +				ts->gc.base);
> +	}

So if it fails here...

> +	struct ad7879_platform_data *pdata = bus->dev.platform_data;
> +	if (pdata->gpio_export) {
> +		if (gpiochip_remove(&ts->gc))
> +			dev_err(&bus->dev, "failed to remove gpio %d\n",
> +				ts->gc.base);

... how valid is it to remove it here?

Also, could you stub out ad7879_gptiochip_export/ad7879_gptiochip_unexport
in case of !CONFIG_GPIOLIB?

> +	}
> +#endif
> +
>  	ad7879_disable(ts);
>  	sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group);
>  	free_irq(ts->bus->irq, ts);
> diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h
> index 4231104..7231eab 100644
> --- a/include/linux/spi/ad7879.h
> +++ b/include/linux/spi/ad7879.h
> @@ -28,8 +28,12 @@ struct ad7879_platform_data {
>  	 * 1 = 4, 2 = 8, 3 = 16 (median > averaging)
>  	 */
>  	u8	median;
> -	/* 1 = AUX/VBAT/GPIO set to GPIO Output */
> -	u8	gpio_output;
> -	/* Initial GPIO pin state (valid if gpio_output = 1) */
> -	u8	gpio_default;
> +	/* 1 = AUX/VBAT/GPIO export GPIO to gpiolib
> +	 * requires CONFIG_GPIOLIB
> +	 */
> +	u8	gpio_export;

And make this a bool while you are at it.

Thanks!

-- 
Dmitry