From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>, Ahmet Inan <inan@distec.de>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@collabora.com,
Sebastian Reichel <sebastian.reichel@collabora.com>
Subject: [PATCHv1 1/2] Input: EXC3000: add EXC80Hxx support
Date: Thu, 7 Nov 2019 19:10:09 +0100 [thread overview]
Message-ID: <20191107181010.17211-1-sebastian.reichel@collabora.com> (raw)
This adds support for EXC80Hxx controllers, which uses
a different event type id and has two extra bits for the
resolution (so the maximum is 16384 instead of 4096).
The patch has been tested with EXC80H60 and EXC80H84.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
.../bindings/input/touchscreen/exc3000.txt | 6 ++--
drivers/input/touchscreen/exc3000.c | 34 ++++++++++++++-----
2 files changed, 30 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
index 68291b94fec2..057b680f0420 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
@@ -1,7 +1,9 @@
-* EETI EXC3000 Multiple Touch Controller
+* EETI EXC3000 and EXC80Hxx Multiple Touch Controller
Required properties:
-- compatible: must be "eeti,exc3000"
+- compatible: must be one of
+ * "eeti,exc3000"
+ * "eeti,exc80hxx"
- reg: i2c slave address
- interrupts: touch controller interrupt
- touchscreen-size-x: See touchscreen.txt
diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
index e007e2e8f626..7d695022082c 100644
--- a/drivers/input/touchscreen/exc3000.c
+++ b/drivers/input/touchscreen/exc3000.c
@@ -23,11 +23,20 @@
#define EXC3000_SLOTS_PER_FRAME 5
#define EXC3000_LEN_FRAME 66
#define EXC3000_LEN_POINT 10
-#define EXC3000_MT_EVENT 6
+
+#define EXC3000_MT1_EVENT 0x06
+#define EXC3000_MT2_EVENT 0x18
+
#define EXC3000_TIMEOUT_MS 100
+enum exc3000_device_type {
+ EETI_EXC3000,
+ EETI_EXC80Hxx
+};
+
struct exc3000_data {
struct i2c_client *client;
+ enum exc3000_device_type type;
struct input_dev *input;
struct touchscreen_properties prop;
struct timer_list timer;
@@ -76,8 +85,10 @@ static int exc3000_read_frame(struct i2c_client *client, u8 *buf)
if (ret != EXC3000_LEN_FRAME)
return -EIO;
- if (get_unaligned_le16(buf) != EXC3000_LEN_FRAME ||
- buf[2] != EXC3000_MT_EVENT)
+ if (get_unaligned_le16(buf) != EXC3000_LEN_FRAME)
+ return -EINVAL;
+
+ if (buf[2] != EXC3000_MT1_EVENT && buf[2] != EXC3000_MT2_EVENT)
return -EINVAL;
return 0;
@@ -157,6 +168,7 @@ static int exc3000_probe(struct i2c_client *client,
return -ENOMEM;
data->client = client;
+ data->type = id->driver_data;
timer_setup(&data->timer, exc3000_timer, 0);
input = devm_input_allocate_device(&client->dev);
@@ -168,8 +180,13 @@ static int exc3000_probe(struct i2c_client *client,
input->name = "EETI EXC3000 Touch Screen";
input->id.bustype = BUS_I2C;
- input_set_abs_params(input, ABS_MT_POSITION_X, 0, 4095, 0, 0);
- input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 4095, 0, 0);
+ if (data->type == EETI_EXC80Hxx) {
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, 16383, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 16383, 0, 0);
+ } else {
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, 4095, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 4095, 0, 0);
+ }
touchscreen_parse_properties(input, true, &data->prop);
error = input_mt_init_slots(input, EXC3000_NUM_SLOTS,
@@ -191,14 +208,15 @@ static int exc3000_probe(struct i2c_client *client,
}
static const struct i2c_device_id exc3000_id[] = {
- { "exc3000", 0 },
- { }
+ { "exc3000", EETI_EXC3000 },
+ { "exc80hxx", EETI_EXC80Hxx }
};
MODULE_DEVICE_TABLE(i2c, exc3000_id);
#ifdef CONFIG_OF
static const struct of_device_id exc3000_of_match[] = {
- { .compatible = "eeti,exc3000" },
+ { .compatible = "eeti,exc3000", .data = (const void*) EETI_EXC3000 },
+ { .compatible = "eeti,exc80hxx", .data = (const void*) EETI_EXC80Hxx },
{ }
};
MODULE_DEVICE_TABLE(of, exc3000_of_match);
--
2.24.0.rc1
next reply other threads:[~2019-11-07 18:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-07 18:10 Sebastian Reichel [this message]
2019-11-07 18:10 ` [PATCHv1 2/2] Input: EXC3000: Add support to query model and fw_version Sebastian Reichel
2019-11-13 0:23 ` Dmitry Torokhov
2019-11-20 11:47 ` Martin Fuzzey
2019-11-22 17:43 ` Martin Fuzzey
2019-11-13 0:19 ` [PATCHv1 1/2] Input: EXC3000: add EXC80Hxx support Dmitry Torokhov
2019-11-20 11:32 ` Martin Fuzzey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191107181010.17211-1-sebastian.reichel@collabora.com \
--to=sebastian.reichel@collabora.com \
--cc=dmitry.torokhov@gmail.com \
--cc=inan@distec.de \
--cc=kernel@collabora.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).