Linux Input Archive on lore.kernel.org
 help / color / Atom feed
From: Gwendal Grignou <gwendal@chromium.org>
To: dmitry.torokhov@gmail.com, groeck@chromium.org,
	briannorris@chromium.org, jic23@kernel.org, knaack.h@gmx.de,
	lars@metafoo.de, pmeerw@pmeerw.net, lee.jones@linaro.org,
	bleung@chromium.org, enric.balletbo@collabora.com,
	dianders@chromium.org, fabien.lahoudere@collabora.com
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
	linux-input@vger.kernel.org,
	Gwendal Grignou <gwendal@chromium.org>
Subject: [PATCH v5 09/18] platform: chrome: sensorhub: Add FIFO support
Date: Fri, 15 Nov 2019 01:34:03 -0800
Message-ID: <20191115093412.144922-10-gwendal@chromium.org> (raw)
In-Reply-To: <20191115093412.144922-1-gwendal@chromium.org>

cros_ec_sensorhub registers a listener and query motion sense FIFO,
spread to iio sensors registers.

To test, we can use libiio:
iiod&
iio_readdev -u ip:localhost -T 10000 -s 25 -b 16 cros-ec-gyro | od -x

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
Changes in v5:
- Use a goto in cros_ec_sensorhub_ring_handler to centralize error
  handling
- Use devm_add_action_or_reset to not need a .remove entry point for
  cros_sensor_hub.
- Fix logic error in cros_ec_sensorhub_register_push_data.
- Update kernel_doc documentation.
- Remve the need for comments in variable declaration section.
Changes in v4:
- Keep defining cros_ec_sensorhub in kernel-doc format
- Fix logic error when checking if sensor index outside array.
- Check patch with --strict option
    Use sizeof(*obj) instead of sizeof(struct ...obj)
    Alignement
    Use uX instead of uintX_t
    Use !ptr instead of ptr != NULL
Changes in v3:
- Do not use ret !=
- Simplfy errpr handling by removing a goto
- Fix doxygen comments
- Replace suspend/resume entry points with regular driver entry point;
  There was an issue in the past where the sensor stack was preventing
  device to suspend, but the proper fix has been implemented in cros_ec
  code (6ad16b78a039b "platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup")
- Reduce mutex scope by checking return code outside of it.
Changes in v2:
- Do not register a .remove routinge in plaform_driver. A
  devm_action_add is added later patch IIO driver register their
callback.
- Remove double lines, add lines before return calls.
- Handle FLUSH flag from EC.

- Use ktime_t for most timestamp measurements.
- Add doxygen comments
- Cleanup timestamp collection when processing FIFO.
- Rename fifo_toggle to fifo_enable

 drivers/platform/chrome/Makefile              |   3 +-
 drivers/platform/chrome/cros_ec_sensorhub.c   | 108 +++--
 .../platform/chrome/cros_ec_sensorhub_ring.c  | 427 ++++++++++++++++++
 .../linux/platform_data/cros_ec_sensorhub.h   |  91 ++++
 4 files changed, 600 insertions(+), 29 deletions(-)
 create mode 100644 drivers/platform/chrome/cros_ec_sensorhub_ring.c

diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
index a164c40dc099..cb709048c003 100644
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -17,7 +17,8 @@ obj-$(CONFIG_CROS_EC_PROTO)		+= cros_ec_proto.o cros_ec_trace.o
 obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT)	+= cros_kbd_led_backlight.o
 obj-$(CONFIG_CROS_EC_CHARDEV)		+= cros_ec_chardev.o
 obj-$(CONFIG_CROS_EC_LIGHTBAR)		+= cros_ec_lightbar.o
-obj-$(CONFIG_CROS_EC_SENSORHUB)		+= cros_ec_sensorhub.o
+cros_ec_sensorsupport-objs			:= cros_ec_sensorhub_ring.o cros_ec_sensorhub.o
+obj-$(CONFIG_CROS_EC_SENSORHUB)		+= cros_ec_sensorsupport.o
 obj-$(CONFIG_CROS_EC_VBC)		+= cros_ec_vbc.o
 obj-$(CONFIG_CROS_EC_DEBUGFS)		+= cros_ec_debugfs.o
 obj-$(CONFIG_CROS_EC_SYSFS)		+= cros_ec_sysfs.o
diff --git a/drivers/platform/chrome/cros_ec_sensorhub.c b/drivers/platform/chrome/cros_ec_sensorhub.c
index 85e3d3f25786..04fd60f747c0 100644
--- a/drivers/platform/chrome/cros_ec_sensorhub.c
+++ b/drivers/platform/chrome/cros_ec_sensorhub.c
@@ -51,10 +51,8 @@ static int cros_ec_sensorhub_register(struct device *dev,
 	int ret, i, id, sensor_num;
 	struct cros_ec_dev *ec = sensorhub->ec;
 	int sensor_type[MOTIONSENSE_TYPE_MAX] = { 0 };
-	struct ec_params_motion_sense *params;
-	struct ec_response_motion_sense *resp;
-	struct cros_ec_command *msg;
 	char *name;
+	struct cros_ec_command *msg = sensorhub->msg;
 
 	sensor_num = cros_ec_get_sensor_count(ec);
 	if (sensor_num < 0) {
@@ -69,30 +67,21 @@ static int cros_ec_sensorhub_register(struct device *dev,
 		return -EINVAL;
 	}
 
-	/* Prepare a message to send INFO command to each sensor. */
-	msg = kzalloc(sizeof(*msg) + max(sizeof(*params), sizeof(*resp)),
-		      GFP_KERNEL);
-	if (!msg)
-		return -ENOMEM;
-
 	msg->version = 1;
-	msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
-	msg->outsize = sizeof(*params);
-	msg->insize = sizeof(*resp);
-	params = (struct ec_params_motion_sense *)msg->data;
-	resp = (struct ec_response_motion_sense *)msg->data;
+	msg->insize = sizeof(struct ec_response_motion_sense);
+	msg->outsize = sizeof(struct ec_params_motion_sense);
 
 	id = 0;
 	for (i = 0; i < sensor_num; i++) {
-		params->cmd = MOTIONSENSE_CMD_INFO;
-		params->info.sensor_num = i;
+		sensorhub->params->cmd = MOTIONSENSE_CMD_INFO;
+		sensorhub->params->info.sensor_num = i;
 		ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
 		if (ret < 0) {
 			dev_warn(dev, "no info for EC sensor %d : %d/%d\n",
 				 i, ret, msg->result);
 			continue;
 		}
-		switch (resp->info.type) {
+		switch (sensorhub->resp->info.type) {
 		case MOTIONSENSE_TYPE_ACCEL:
 			name = "cros-ec-accel";
 			break;
@@ -115,14 +104,15 @@ static int cros_ec_sensorhub_register(struct device *dev,
 			name = "cros-ec-activity";
 			break;
 		default:
-			dev_warn(dev, "unknown type %d\n", resp->info.type);
+			dev_warn(dev, "unknown type %d\n",
+				 sensorhub->resp->info.type);
 			continue;
 		}
 		ret = cros_ec_sensorhub_allocate_single_sensor(dev, name, i);
 		if (ret)
-			goto error;
+			return ret;
 
-		sensor_type[resp->info.type]++;
+		sensor_type[sensorhub->resp->info.type]++;
 	}
 
 	if (sensor_type[MOTIONSENSE_TYPE_ACCEL] >= 2)
@@ -133,14 +123,9 @@ static int cros_ec_sensorhub_register(struct device *dev,
 		ret = cros_ec_sensorhub_allocate_single_sensor(dev,
 							"cros-ec-lid-angle", 0);
 		if (ret)
-			goto error;
+			return ret;
 	}
-	kfree(msg);
 	return 0;
-
-error:
-	kfree(msg);
-	return ret;
 }
 
 static int cros_ec_sensorhub_probe(struct platform_device *sensorhub_pdev)
@@ -148,13 +133,29 @@ static int cros_ec_sensorhub_probe(struct platform_device *sensorhub_pdev)
 	struct device *dev = &sensorhub_pdev->dev;
 	struct cros_ec_dev *ec = dev_get_drvdata(dev->parent);
 	int ret, i;
-	struct cros_ec_sensorhub *data =
-		devm_kzalloc(dev, sizeof(struct cros_ec_sensorhub), GFP_KERNEL);
+	struct cros_ec_sensorhub *data;
+	struct cros_ec_command *msg;
 
+	msg = devm_kzalloc(dev, sizeof(struct cros_ec_command) +
+			max((u16)sizeof(struct ec_params_motion_sense),
+			    ec->ec_dev->max_response), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
+
+	data = devm_kzalloc(dev, sizeof(struct cros_ec_sensorhub), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
+	data->dev = dev;
 	data->ec = ec;
+
+	mutex_init(&data->cmd_lock);
+	data->msg = msg;
+	data->params = (struct ec_params_motion_sense *)msg->data;
+	data->resp = (struct ec_response_motion_sense *)msg->data;
+
 	dev_set_drvdata(dev, data);
 
 	/* Check whether this EC is a sensor hub. */
@@ -179,12 +180,63 @@ static int cros_ec_sensorhub_probe(struct platform_device *sensorhub_pdev)
 		}
 	}
 
+	/*
+	 * If the EC does not have a FIFO, the sensors will query their data
+	 * themselves via sysfs or a software trigger.
+	 */
+	if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO)) {
+		ret = cros_ec_sensorhub_ring_add(data);
+		if (ret)
+			return ret;
+		/*
+		 * The msg and its data is not under the control of the ring
+		 * handler.
+		 */
+		return devm_add_action_or_reset(dev,
+						cros_ec_sensorhub_ring_remove,
+						data);
+	}
+
+	return 0;
+}
+
+#if CONFIG_PM_SLEEP
+/*
+ * When the EC is suspending, we must stop sending interrupt,
+ * we may use the same interrupt line for waking up the device.
+ * Tell the EC to stop sending non-interrupt event on the iio ring.
+ */
+static int cros_ec_ring_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct cros_ec_sensorhub *sensorhub = platform_get_drvdata(pdev);
+	struct cros_ec_dev *ec = sensorhub->ec;
+
+	if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO))
+		return cros_ec_sensorhub_ring_fifo_enable(sensorhub, false);
 	return 0;
 }
 
+static int cros_ec_ring_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct cros_ec_sensorhub *sensorhub = platform_get_drvdata(pdev);
+	struct cros_ec_dev *ec = sensorhub->ec;
+
+	if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO))
+		return cros_ec_sensorhub_ring_fifo_enable(sensorhub, true);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_ec_sensorhub_ring_pm_ops,
+		cros_ec_ring_suspend,
+		cros_ec_ring_resume);
+
 static struct platform_driver cros_ec_sensorhub_driver = {
 	.driver = {
 		.name = DRV_NAME,
+		.pm = &cros_ec_sensorhub_ring_pm_ops,
 	},
 	.probe = cros_ec_sensorhub_probe,
 };
diff --git a/drivers/platform/chrome/cros_ec_sensorhub_ring.c b/drivers/platform/chrome/cros_ec_sensorhub_ring.c
new file mode 100644
index 000000000000..32333f67e26a
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_sensorhub_ring.c
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cros_ec_sensorhub_ring - Driver for Chrome OS EC Sensor hub FIFO.
+ *
+ * Copyright 2019 Google LLC
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_ec_sensorhub.h>
+#include <linux/platform_device.h>
+#include <linux/sort.h>
+#include <linux/slab.h>
+
+static inline int cros_sensorhub_send_sample(
+		struct cros_ec_sensorhub *sensorhub,
+		struct cros_ec_sensors_ring_sample *sample)
+{
+	int id = sample->sensor_id;
+	cros_ec_sensorhub_push_data_cb_t cb;
+	struct iio_dev *indio_dev;
+
+	if (id > CROS_EC_SENSOR_MAX)
+		return -EINVAL;
+
+	cb = sensorhub->push_data[id].push_data_cb;
+	if (!cb)
+		return 0;
+
+	indio_dev = sensorhub->push_data[id].indio_dev;
+
+	if (sample->flag & MOTIONSENSE_SENSOR_FLAG_FLUSH)
+		return 0;
+
+	return cb(indio_dev, sample->vector, sample->timestamp);
+}
+
+/**
+ * cros_ec_sensorhub_register_push_data() - register the callback to the hub.
+ *
+ * @sensorhub : Sensor Hub object
+ * @sensor_num : The sensor the caller is interested in.
+ * @indio_dev : The iio device to use when a sample arrives.
+ * @cb : The callback to call when a sample arrives.
+ *
+ * The callback cb will be used by cros_ec_sensorhub_ring to distribute events
+ * from the EC.
+ *
+ * Return: 0 when callback is registered.
+ */
+int cros_ec_sensorhub_register_push_data(struct cros_ec_sensorhub *sensorhub,
+					 u8 sensor_num,
+					 struct iio_dev *indio_dev,
+					 cros_ec_sensorhub_push_data_cb_t cb)
+{
+	if (sensor_num >= CROS_EC_SENSOR_PDEV_MAX)
+		return -EINVAL;
+	if (sensorhub->push_data[sensor_num].indio_dev)
+		return -EINVAL;
+
+	sensorhub->push_data[sensor_num].indio_dev = indio_dev;
+	sensorhub->push_data[sensor_num].push_data_cb = cb;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensorhub_register_push_data);
+
+void cros_ec_sensorhub_unregister_push_data(struct cros_ec_sensorhub *sensorhub,
+					    u8 sensor_num)
+{
+	sensorhub->push_data[sensor_num].indio_dev = NULL;
+	sensorhub->push_data[sensor_num].push_data_cb = NULL;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensorhub_unregister_push_data);
+
+/**
+ * cros_ec_sensorhub_ring_fifo_enable() - Enable or disable interrupt generation
+ *  for FIFO events.
+ * @sensorhub : Sensor Hub object
+ * @on : true when events are requested.
+ *
+ * To be called before sleeping or when noone is listening.
+ * Return: 0 on success.
+ */
+int cros_ec_sensorhub_ring_fifo_enable(struct cros_ec_sensorhub *sensorhub,
+				       bool on)
+{
+	int ret;
+
+	mutex_lock(&sensorhub->cmd_lock);
+	sensorhub->params->cmd = MOTIONSENSE_CMD_FIFO_INT_ENABLE;
+	sensorhub->params->fifo_int_enable.enable = on;
+
+	sensorhub->msg->outsize = sizeof(struct ec_params_motion_sense);
+	sensorhub->msg->insize = sizeof(struct ec_response_motion_sense);
+
+	ret = cros_ec_cmd_xfer_status(sensorhub->ec->ec_dev, sensorhub->msg);
+	mutex_unlock(&sensorhub->cmd_lock);
+
+	/* We expect to receive a payload of 4 bytes, ignore. */
+	if (ret > 0)
+		ret = 0;
+
+	return ret;
+}
+
+/**
+ * cros_ec_ring_process_event() - process one EC FIFO event
+ *
+ * @sensorhub: Sensorhub object.
+ * @fifo_info: fifo information from the EC (includes b point, EC timebase).
+ * @fifo_timestamp: EC IRQ, kernel timebase (aka c)
+ * @current_timestamp: calculated event timestamp, kernel timebase (aka a')
+ * @in: incoming FIFO event from EC (includes a point, EC timebase)
+ * @out: outgoing event to user space (includes a')
+ *
+ * Process one EC event, add it in the ring if necessary.
+ *
+ * Return: true if out event has been populated.
+ */
+static bool cros_ec_ring_process_event(struct cros_ec_sensorhub *sensorhub,
+				const struct cros_ec_fifo_info *fifo_info,
+				const ktime_t fifo_timestamp,
+				ktime_t *current_timestamp,
+				struct ec_response_motion_sensor_data *in,
+				struct cros_ec_sensors_ring_sample *out)
+{
+	int axis, async_flags;
+	const s64 now = cros_ec_get_time_ns();
+
+	/* Do not populate the filter based on asynchronous events. */
+	async_flags = in->flags &
+		(MOTIONSENSE_SENSOR_FLAG_ODR | MOTIONSENSE_SENSOR_FLAG_FLUSH);
+
+	if (in->flags & MOTIONSENSE_SENSOR_FLAG_TIMESTAMP && !async_flags) {
+		s64 a = in->timestamp;
+		s64 b = fifo_info->info.timestamp;
+		s64 c = fifo_timestamp;
+		s64 new_timestamp;
+
+		/*
+		 * disable filtering since we might add more jitter
+		 * if b is in a random point in time
+		 */
+		new_timestamp = c - b * 1000 + a * 1000;
+
+		/*
+		 * The timestamp can be stale if we had to use the fifo
+		 * info timestamp.
+		 */
+		if (new_timestamp - *current_timestamp > 0)
+			*current_timestamp = new_timestamp;
+	}
+
+	if (in->flags & MOTIONSENSE_SENSOR_FLAG_FLUSH) {
+		out->sensor_id = in->sensor_num;
+		out->timestamp = *current_timestamp;
+		out->flag = in->flags;
+		/*
+		 * No other payload information provided with
+		 * flush ack.
+		 */
+		return true;
+	}
+
+	if (in->flags & MOTIONSENSE_SENSOR_FLAG_TIMESTAMP)
+		/* If we just have a timestamp, skip this entry. */
+		return false;
+
+	/* Regular sample */
+	out->sensor_id = in->sensor_num;
+	if (*current_timestamp - now > 0) {
+		/* If the timestamp is in the future. */
+		out->timestamp = now;
+	} else {
+		out->timestamp = *current_timestamp;
+	}
+
+	out->flag = in->flags;
+	for (axis = 0; axis < 3; axis++)
+		out->vector[axis] = in->data[axis];
+
+	return true;
+}
+
+/**
+ * cros_ec_sensorhub_ring_handler() - the trigger handler function
+ *
+ * @sensorhub: device information.
+ *
+ * Called by the notifier, process the EC sensor FIFO queue.
+ */
+static void cros_ec_sensorhub_ring_handler(struct cros_ec_sensorhub *sensorhub)
+{
+	struct cros_ec_fifo_info *fifo_info = &sensorhub->fifo_info;
+	struct cros_ec_dev *ec = sensorhub->ec;
+	ktime_t fifo_timestamp, current_timestamp;
+	int i, j, number_data, ret;
+	unsigned long sensor_mask = 0;
+	struct ec_response_motion_sensor_data *in;
+	struct cros_ec_sensors_ring_sample *out, *last_out;
+
+	mutex_lock(&sensorhub->cmd_lock);
+
+	/* Get FIFO information if there are lost vectors. */
+	if (fifo_info->info.total_lost) {
+		/* Need to retrieve the number of lost vectors per sensor */
+		sensorhub->params->cmd = MOTIONSENSE_CMD_FIFO_INFO;
+		sensorhub->msg->outsize = 1;
+		sensorhub->msg->insize =
+			sizeof(struct ec_response_motion_sense_fifo_info) +
+			sizeof(u16) * CROS_EC_SENSOR_MAX;
+
+		if (cros_ec_cmd_xfer_status(ec->ec_dev, sensorhub->msg) < 0)
+			goto error;
+
+		memcpy(fifo_info, &sensorhub->resp->fifo_info,
+		       sizeof(*fifo_info));
+
+		/*
+		 * Update collection time, will not be as precise as the
+		 * non-error case.
+		 */
+		fifo_timestamp = cros_ec_get_time_ns();
+	} else {
+		fifo_timestamp = sensorhub->fifo_timestamp[
+			CROS_EC_SENSOR_NEW_TS];
+	}
+
+	if (fifo_info->info.count > sensorhub->fifo_size ||
+	    fifo_info->info.size != sensorhub->fifo_size) {
+		dev_warn(sensorhub->dev,
+			 "Mismatch EC data: count %d, size %d - expected %d",
+			 fifo_info->info.count, fifo_info->info.size,
+			 sensorhub->fifo_size);
+		goto error;
+	}
+
+	/* Copy elements in the main fifo */
+	current_timestamp = sensorhub->fifo_timestamp[CROS_EC_SENSOR_LAST_TS];
+	out = sensorhub->ring;
+	for (i = 0; i < fifo_info->info.count; i += number_data) {
+		sensorhub->params->cmd = MOTIONSENSE_CMD_FIFO_READ;
+		sensorhub->params->fifo_read.max_data_vector =
+			fifo_info->info.count - i;
+		sensorhub->msg->outsize =
+			sizeof(struct ec_params_motion_sense);
+		sensorhub->msg->insize =
+			sizeof(sensorhub->resp->fifo_read) +
+			sensorhub->params->fifo_read.max_data_vector *
+			  sizeof(struct ec_response_motion_sensor_data);
+		ret = cros_ec_cmd_xfer_status(ec->ec_dev, sensorhub->msg);
+		if (ret < 0) {
+			dev_warn(sensorhub->dev, "Fifo error: %d\n", ret);
+			break;
+		}
+		number_data = sensorhub->resp->fifo_read.number_data;
+		if (number_data == 0) {
+			dev_dbg(sensorhub->dev, "Unexpected empty FIFO\n");
+			break;
+		}
+		if (number_data > fifo_info->info.count - i) {
+			dev_warn(sensorhub->dev,
+				 "Invalid EC data: too many entry received: %d, expected %d",
+				 number_data, fifo_info->info.count - i);
+			break;
+		}
+		if (out + number_data >
+		    sensorhub->ring + fifo_info->info.count) {
+			dev_warn(sensorhub->dev,
+				 "Too many samples: %d (%zd data) to %d entries for expected %d entries",
+				 i, out - sensorhub->ring, i + number_data,
+				 fifo_info->info.count);
+			break;
+		}
+
+		for (in = sensorhub->resp->fifo_read.data, j = 0;
+		     j < number_data; j++, in++) {
+			if (cros_ec_ring_process_event(sensorhub, fifo_info,
+						       fifo_timestamp,
+						       &current_timestamp,
+						       in, out)) {
+				sensor_mask |= (1 << in->sensor_num);
+				out++;
+			}
+		}
+	}
+	mutex_unlock(&sensorhub->cmd_lock);
+	last_out = out;
+
+	if (out == sensorhub->ring)
+		/* Unexpected empty FIFO. */
+		goto ring_handler_end;
+
+	/*
+	 * Check if current_timestamp is ahead of the last sample.
+	 * Normally, the EC appends a timestamp after the last sample, but if
+	 * the AP is slow to respond to the IRQ, the EC may have added new
+	 * samples. Use the FIFO info timestamp as last timestamp then.
+	 */
+	if ((last_out - 1)->timestamp == current_timestamp)
+		current_timestamp = fifo_timestamp;
+
+	/* Warn on lost samples. */
+	for_each_set_bit(i, &sensor_mask, BITS_PER_LONG) {
+		int total_lost = fifo_info->info.total_lost;
+
+		if (total_lost) {
+			int lost = fifo_info->lost[i];
+
+			if (lost) {
+				dev_warn_ratelimited(sensorhub->dev,
+						     "Sensor %d: lost: %d out of %d\n",
+						     i, lost, total_lost);
+			}
+		}
+	}
+
+	/* push the event into the kfifo */
+	for (out = sensorhub->ring; out < last_out; out++)
+		cros_sensorhub_send_sample(sensorhub, out);
+
+ring_handler_end:
+	sensorhub->fifo_timestamp[CROS_EC_SENSOR_LAST_TS] = current_timestamp;
+	return;
+
+error:
+	mutex_unlock(&sensorhub->cmd_lock);
+	return;
+}
+
+static int cros_ec_sensorhub_event(struct notifier_block *nb,
+				   unsigned long queued_during_suspend,
+				   void *_notify)
+{
+	struct cros_ec_sensorhub *sensorhub;
+	struct cros_ec_device *ec_dev;
+
+	sensorhub = container_of(nb, struct cros_ec_sensorhub, notifier);
+	ec_dev = sensorhub->ec->ec_dev;
+
+	if (ec_dev->event_data.event_type != EC_MKBP_EVENT_SENSOR_FIFO)
+		return NOTIFY_DONE;
+
+	if (ec_dev->event_size != sizeof(ec_dev->event_data.data.sensor_fifo)) {
+		dev_warn(ec_dev->dev, "Invalid fifo info size\n");
+		return NOTIFY_DONE;
+	}
+
+	if (queued_during_suspend)
+		return NOTIFY_OK;
+
+	sensorhub->fifo_info.info = ec_dev->event_data.data.sensor_fifo.info;
+	sensorhub->fifo_timestamp[CROS_EC_SENSOR_NEW_TS] =
+		ec_dev->last_event_time;
+	cros_ec_sensorhub_ring_handler(sensorhub);
+
+	return NOTIFY_OK;
+}
+
+/**
+ * cros_ec_sensorhub_ring_add() - Add/Remove the fifo functionality if the EC
+ *  supports it.
+ *
+ * @sensorhub : Sensor Hub object
+ *
+ * Return: 0 on success.
+ */
+int cros_ec_sensorhub_ring_add(struct cros_ec_sensorhub *sensorhub)
+{
+	struct cros_ec_dev *ec = sensorhub->ec;
+	int ret;
+
+	/* Retrieve FIFO information */
+	sensorhub->msg->version = 2;
+	sensorhub->params->cmd = MOTIONSENSE_CMD_FIFO_INFO;
+	sensorhub->msg->outsize = 1;
+	sensorhub->msg->insize =
+		sizeof(struct ec_response_motion_sense_fifo_info) +
+		sizeof(u16) * CROS_EC_SENSOR_MAX;
+
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, sensorhub->msg);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Allocate the full fifo.
+	 * We need to copy the whole FIFO to set timestamps properly *
+	 */
+	sensorhub->fifo_size = sensorhub->resp->fifo_info.size;
+	sensorhub->ring = devm_kcalloc(sensorhub->dev, sensorhub->fifo_size,
+				       sizeof(*sensorhub->ring), GFP_KERNEL);
+	if (!sensorhub->ring)
+		return -ENOMEM;
+
+	sensorhub->fifo_timestamp[CROS_EC_SENSOR_LAST_TS] =
+		cros_ec_get_time_ns();
+
+	/* register the notifier that will act as a top half interrupt. */
+	sensorhub->notifier.notifier_call = cros_ec_sensorhub_event;
+	ret = blocking_notifier_chain_register(&ec->ec_dev->event_notifier,
+					       &sensorhub->notifier);
+	if (ret < 0) {
+		dev_warn(sensorhub->dev, "failed to register notifier\n");
+		return ret;
+	}
+
+	/* Start collection samples. */
+	return cros_ec_sensorhub_ring_fifo_enable(sensorhub, true);
+}
+
+void cros_ec_sensorhub_ring_remove(void *arg)
+{
+	struct cros_ec_sensorhub *sensorhub = arg;
+	struct cros_ec_device *ec_dev = sensorhub->ec->ec_dev;
+
+	/* Disable the ring, prevent EC interrupt to the AP for nothing. */
+	cros_ec_sensorhub_ring_fifo_enable(sensorhub, false);
+	blocking_notifier_chain_unregister(&ec_dev->event_notifier,
+					   &sensorhub->notifier);
+}
diff --git a/include/linux/platform_data/cros_ec_sensorhub.h b/include/linux/platform_data/cros_ec_sensorhub.h
index 7421c956246f..5aaaa6cb012a 100644
--- a/include/linux/platform_data/cros_ec_sensorhub.h
+++ b/include/linux/platform_data/cros_ec_sensorhub.h
@@ -8,8 +8,20 @@
 #ifndef __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H
 #define __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H
 
+#include <linux/ktime.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
 #include <linux/platform_data/cros_ec_commands.h>
 
+/* Maximal number of sensors supported by the EC. */
+#define CROS_EC_SENSOR_MAX 16
+
+/*
+ * Maximal number of sensors supported by the hub:
+ * We add one for the lid angle inclinometer sensor.
+ */
+#define CROS_EC_SENSOR_PDEV_MAX (CROS_EC_SENSOR_MAX + 1)
+
 /**
  * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
  * @sensor_num: Id of the sensor, as reported by the EC.
@@ -18,13 +30,92 @@ struct cros_ec_sensor_platform {
 	u8 sensor_num;
 };
 
+struct iio_dev;
+
+/**
+ * typedef cros_ec_sensorhub_push_data_cb_t - Callback function to send datum
+ *     to specific sensors
+ *
+ * @indio_dev: The IIO device that will process the sample.
+ * @data: vector array of the ring sample.
+ * @timestamp: Timestamp in host timespace when the sample was acquired by
+ *             the EC.
+ */
+typedef int (*cros_ec_sensorhub_push_data_cb_t)(struct iio_dev *indio_dev,
+						s16 *data,
+						s64 timestamp);
+
+struct cros_ec_sensorhub_sensor_push_data {
+	struct iio_dev *indio_dev;
+	cros_ec_sensorhub_push_data_cb_t push_data_cb;
+};
+
+enum {
+	CROS_EC_SENSOR_LAST_TS,
+	CROS_EC_SENSOR_NEW_TS,
+	CROS_EC_SENSOR_ALL_TS
+};
+
+struct __ec_todo_packed cros_ec_fifo_info {
+	struct ec_response_motion_sense_fifo_info info;
+	u16    lost[CROS_EC_SENSOR_MAX];
+};
+
+struct cros_ec_sensors_ring_sample {
+	u8  sensor_id;
+	u8  flag;
+	s16 vector[3];
+	s64 timestamp;
+} __packed;
+
 /**
  * struct cros_ec_sensorhub - Sensor Hub device data.
  *
+ * @dev:          Device object, mostly used for logging.
  * @ec:           Embedded Controller where the hub is located.
+ * @msg: Structure to send FIFO requests.
+ * @params: pointer to parameters in msg.
+ * @resp: pointer to responses in msg.
+ * @cmd_lock : lock for sending msg.
+ * @notifier: Notifier to kick the FIFO interrupt.
+ * @ring: Preprocessed ring to store events.
+ * @fifo_timestamp: array for event timestamp and spreading.
+ * @fifo_info: copy of FIFO information coming from the EC.
+ * @fifo_size: size of the ring.
+ * @push_data: array of callback to send datums to iio sensor object.
  */
 struct cros_ec_sensorhub {
+	struct device *dev;
 	struct cros_ec_dev *ec;
+
+	struct cros_ec_command *msg;
+	struct ec_params_motion_sense *params;
+	struct ec_response_motion_sense *resp;
+	struct mutex cmd_lock;
+
+	struct notifier_block notifier;
+
+	struct cros_ec_sensors_ring_sample *ring;
+
+	ktime_t fifo_timestamp[CROS_EC_SENSOR_ALL_TS];
+	struct cros_ec_fifo_info fifo_info;
+	int    fifo_size;
+
+	struct cros_ec_sensorhub_sensor_push_data push_data[
+		CROS_EC_SENSOR_PDEV_MAX];
 };
 
+int cros_ec_sensorhub_register_push_data(struct cros_ec_sensorhub *sensorhub,
+					 u8 sensor_num,
+					 struct iio_dev *indio_dev,
+					 cros_ec_sensorhub_push_data_cb_t cb);
+
+void cros_ec_sensorhub_unregister_push_data(struct cros_ec_sensorhub *sensorhub,
+					    u8 sensor_num);
+
+int cros_ec_sensorhub_ring_add(struct cros_ec_sensorhub *sensorhub);
+void cros_ec_sensorhub_ring_remove(void *arg);
+int cros_ec_sensorhub_ring_fifo_enable(struct cros_ec_sensorhub *sensorhub,
+				       bool on);
+
 #endif   /* __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H */
-- 
2.24.0.432.g9d3f5f5b63-goog


  parent reply index

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-15  9:33 [PATCH v5 00/18] cros_ec: Add sensorhub driver and FIFO processing Gwendal Grignou
2019-11-15  9:33 ` [PATCH v5 01/18] mfd: cros_ec: Add sensor_count and make check_features public Gwendal Grignou
2019-11-15  9:33 ` [PATCH v5 02/18] platform: cros_ec: Add cros_ec_sensor_hub driver Gwendal Grignou
2019-11-16 11:32   ` Jonathan Cameron
2019-11-15  9:33 ` [PATCH v5 03/18] platform/mfd:iio: cros_ec: Register sensor through sensorhub Gwendal Grignou
2019-11-15  9:33 ` [PATCH v5 04/18] platform: chrome: cros-ec: record event timestamp in the hard irq Gwendal Grignou
2019-11-15  9:33 ` [PATCH v5 05/18] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 06/18] platform: chrome: cros_ec: handle MKBP more events flag Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 07/18] Revert "Input: cros_ec_keyb - add back missing mask for event_type" Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 08/18] Revert "Input: cros_ec_keyb: mask out extra flags in event_type" Gwendal Grignou
2019-11-15  9:34 ` Gwendal Grignou [this message]
2019-11-16 11:39   ` [PATCH v5 09/18] platform: chrome: sensorhub: Add FIFO support Jonathan Cameron
2019-11-22 11:35   ` Enric Balletbo i Serra
2020-03-24 20:31     ` Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 10/18] platform: chrome: sensorhub: Add code to spread timestmap Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 11/18] platform: chrome: sensorhub: Add median filter Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 12/18] iio: cros_ec: Move function description to .c file Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 13/18] iio: expose iio_device_set_clock Gwendal Grignou
2019-11-16 11:42   ` Jonathan Cameron
2019-11-15  9:34 ` [PATCH v5 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO Gwendal Grignou
2019-11-16 11:44   ` Jonathan Cameron
2019-11-15  9:34 ` [PATCH v5 15/18] iio: cros_ec: Remove pm function Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 16/18] iio: cros_ec: Expose hwfifo_timeout Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 17/18] iio: cros_ec: Report hwfifo_watermark_max Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 18/18] iio: cros_ec: Use Hertz as unit for sampling frequency Gwendal Grignou
2019-11-22 11:11 ` [PATCH v5 00/18] cros_ec: Add sensorhub driver and FIFO processing Enric Balletbo i Serra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191115093412.144922-10-gwendal@chromium.org \
    --to=gwendal@chromium.org \
    --cc=bleung@chromium.org \
    --cc=briannorris@chromium.org \
    --cc=dianders@chromium.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=enric.balletbo@collabora.com \
    --cc=fabien.lahoudere@collabora.com \
    --cc=groeck@chromium.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git