Linux Input Archive on lore.kernel.org
 help / color / Atom feed
From: Gwendal Grignou <gwendal@chromium.org>
To: dmitry.torokhov@gmail.com, groeck@chromium.org,
	briannorris@chromium.org, jic23@kernel.org, knaack.h@gmx.de,
	lars@metafoo.de, pmeerw@pmeerw.net, lee.jones@linaro.org,
	bleung@chromium.org, enric.balletbo@collabora.com,
	dianders@chromium.org, fabien.lahoudere@collabora.com
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
	linux-input@vger.kernel.org,
	Gwendal Grignou <gwendal@chromium.org>
Subject: [PATCH v5 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
Date: Fri, 15 Nov 2019 01:34:08 -0800
Message-ID: <20191115093412.144922-15-gwendal@chromium.org> (raw)
In-Reply-To: <20191115093412.144922-1-gwendal@chromium.org>

When EC supports FIFO, each IIO device registers a callback, to put
samples in the buffer when they arrives from the FIFO.
We can still use a trigger to collect samples, but there may be some
duplications in the buffer: EC has a single FIFO, so once one sensor is
using it, all sensors event will be in the FIFO.

When no FIFO, the user space app needs to call trigger_new, or better
register a high precision timer.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
Changes in v5:
- Revert modes setting that were removed by mistake
- Remove unnecessary check when receving events from callback
- Set clock_id to boottime by default, as it is what sensorhub_ring is
  using.
- Update commit messages reference to time domain: trigger and hub
  generated events are always in the same time domain.
Changes in v4:
- Fix a logic error when the sensor is not "physical", for instance lig
  angle: core_init() would return !0 even if there was no error.
- Check patch with --strict option
    Use sizeof(*obj) instead of sizeof(struct ...obj)
    Alignement
Change in v3:
- Remove double line
- Fix indentation
- Add code to support iio clock_id setting. Optimized for
  CLOCK_BOOTTIME.
Change in v2 from "Use triggered buffer only when EC does not support
FIFO":
- Keep trigger all the time.
- Add  devm_add_action to cleanup callback registration.
- EC that "reports" legacy sensors do not have FIFO.
- Use iiio_is_buffer_enabled instead of checking the scan_mask
  before sending samples to buffer.
- Add empty lines for visibility.

 drivers/iio/accel/cros_ec_accel_legacy.c      |  8 +-
 .../cros_ec_sensors/cros_ec_lid_angle.c       |  2 +-
 .../common/cros_ec_sensors/cros_ec_sensors.c  |  9 +--
 .../cros_ec_sensors/cros_ec_sensors_core.c    | 81 ++++++++++++++++++-
 drivers/iio/light/cros_ec_light_prox.c        |  9 +--
 drivers/iio/pressure/cros_ec_baro.c           |  9 +--
 .../linux/iio/common/cros_ec_sensors_core.h   | 10 ++-
 7 files changed, 101 insertions(+), 27 deletions(-)

diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c
index 65f85faf6f31..b9f651e4ce99 100644
--- a/drivers/iio/accel/cros_ec_accel_legacy.c
+++ b/drivers/iio/accel/cros_ec_accel_legacy.c
@@ -171,7 +171,8 @@ static int cros_ec_accel_legacy_probe(struct platform_device *pdev)
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true,
+					cros_ec_sensors_capture, NULL);
 	if (ret)
 		return ret;
 
@@ -191,11 +192,6 @@ static int cros_ec_accel_legacy_probe(struct platform_device *pdev)
 		state->sign[CROS_EC_SENSOR_Z] = -1;
 	}
 
-	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
-			cros_ec_sensors_capture, NULL);
-	if (ret)
-		return ret;
-
 	return devm_iio_device_register(dev, indio_dev);
 }
 
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
index 1dcc2a16ab2d..e30a59fcf0f9 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
@@ -97,7 +97,7 @@ static int cros_ec_lid_angle_probe(struct platform_device *pdev)
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = cros_ec_sensors_core_init(pdev, indio_dev, false);
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, false, NULL, NULL);
 	if (ret)
 		return ret;
 
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
index 7dce04473467..62a0dd970988 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -231,7 +231,9 @@ static int cros_ec_sensors_probe(struct platform_device *pdev)
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true,
+					cros_ec_sensors_capture,
+					cros_ec_sensors_push_data);
 	if (ret)
 		return ret;
 
@@ -293,11 +295,6 @@ static int cros_ec_sensors_probe(struct platform_device *pdev)
 	else
 		state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
 
-	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
-			cros_ec_sensors_capture, NULL);
-	if (ret)
-		return ret;
-
 	return devm_iio_device_register(dev, indio_dev);
 }
 
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index b47da497a3c3..cffc712c32a7 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -12,6 +12,7 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/kfifo_buf.h>
 #include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
 #include <linux/kernel.h>
 #include <linux/mfd/cros_ec.h>
 #include <linux/module.h>
@@ -83,17 +84,71 @@ static void get_default_min_max_freq(enum motionsensor_type type,
 	}
 }
 
+int cros_ec_sensors_push_data(struct iio_dev *indio_dev,
+			      s16 *data,
+			      s64 timestamp)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	s16 *out;
+	s64 delta;
+	unsigned int i;
+
+	/*
+	 * Ignore samples if the buffer is not set: it is needed if the ODR is
+	 * set but the buffer is not enabled yet.
+	 */
+	if (!iio_buffer_enabled(indio_dev))
+		return 0;
+
+	out = (s16 *)st->samples;
+	for_each_set_bit(i,
+			 indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		*out = data[i];
+		out++;
+	}
+
+	if (iio_device_get_clock(indio_dev) != CLOCK_BOOTTIME)
+		delta = iio_get_time_ns(indio_dev) - cros_ec_get_time_ns();
+	else
+		delta = 0;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, st->samples,
+					   timestamp + delta);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_push_data);
+
+static void cros_ec_sensors_core_clean(void *arg)
+{
+	struct platform_device *pdev = (struct platform_device *)arg;
+	struct cros_ec_sensorhub *sensor_hub =
+		dev_get_drvdata(pdev->dev.parent);
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	u8 sensor_num = st->param.info.sensor_num;
+
+	cros_ec_sensorhub_unregister_push_data(sensor_hub, sensor_num);
+}
+
 /**
  * cros_ec_sensors_core_init() - basic initialization of the core structure
  * @pdev:		platform device created for the sensors
  * @indio_dev:		iio device structure of the device
  * @physical_device:	true if the device refers to a physical device
+ * @trigger_capture:    function pointer to call buffer is triggered,
+ *    for backward compatibility.
+ * @push_data:          function to call when cros_ec_sensorhub receives
+ *    a sample for that sensor.
  *
  * Return: 0 on success, -errno on failure.
  */
 int cros_ec_sensors_core_init(struct platform_device *pdev,
 			      struct iio_dev *indio_dev,
-			      bool physical_device)
+			      bool physical_device,
+			      cros_ec_sensors_capture_t trigger_capture,
+			      cros_ec_sensorhub_push_data_cb_t push_data)
 {
 	struct device *dev = &pdev->dev;
 	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
@@ -162,6 +217,30 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 			state->frequencies[2] =
 			    state->resp->info_3.max_frequency;
 		}
+
+		ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+						      trigger_capture, NULL);
+		if (ret)
+			return ret;
+
+		if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO)) {
+			ret = cros_ec_sensorhub_register_push_data(sensor_hub,
+						sensor_platform->sensor_num,
+						indio_dev, push_data);
+			if (ret)
+				return ret;
+
+			ret = devm_add_action_or_reset(dev,
+						cros_ec_sensors_core_clean,
+						pdev);
+			if (ret)
+				return ret;
+
+			/* Timestamp coming from FIFO are in ns since boot. */
+			ret = iio_device_set_clock(indio_dev, CLOCK_BOOTTIME);
+			if (ret)
+				return ret;
+		}
 	}
 
 	return 0;
diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
index d85a391e50c5..698b2ee81ebf 100644
--- a/drivers/iio/light/cros_ec_light_prox.c
+++ b/drivers/iio/light/cros_ec_light_prox.c
@@ -178,7 +178,9 @@ static int cros_ec_light_prox_probe(struct platform_device *pdev)
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true,
+					cros_ec_sensors_capture,
+					cros_ec_sensors_push_data);
 	if (ret)
 		return ret;
 
@@ -237,11 +239,6 @@ static int cros_ec_light_prox_probe(struct platform_device *pdev)
 
 	state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
 
-	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
-					      cros_ec_sensors_capture, NULL);
-	if (ret)
-		return ret;
-
 	return devm_iio_device_register(dev, indio_dev);
 }
 
diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
index 2354302375de..e1c86b22676c 100644
--- a/drivers/iio/pressure/cros_ec_baro.c
+++ b/drivers/iio/pressure/cros_ec_baro.c
@@ -134,7 +134,9 @@ static int cros_ec_baro_probe(struct platform_device *pdev)
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true,
+					cros_ec_sensors_capture,
+					cros_ec_sensors_push_data);
 	if (ret)
 		return ret;
 
@@ -180,11 +182,6 @@ static int cros_ec_baro_probe(struct platform_device *pdev)
 
 	state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
 
-	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
-					      cros_ec_sensors_capture, NULL);
-	if (ret)
-		return ret;
-
 	return devm_iio_device_register(dev, indio_dev);
 }
 
diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
index 0af918978f97..b8f573ca9dcc 100644
--- a/include/linux/iio/common/cros_ec_sensors_core.h
+++ b/include/linux/iio/common/cros_ec_sensors_core.h
@@ -12,6 +12,7 @@
 #include <linux/irqreturn.h>
 #include <linux/platform_data/cros_ec_commands.h>
 #include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_ec_sensorhub.h>
 
 enum {
 	CROS_EC_SENSOR_X,
@@ -32,6 +33,8 @@ enum {
 /* Minimum sampling period to use when device is suspending */
 #define CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY 1000  /* 1 second */
 
+typedef irqreturn_t (*cros_ec_sensors_capture_t)(int irq, void *p);
+
 /**
  * struct cros_ec_sensors_core_state - state data for EC sensors IIO driver
  * @ec:				cros EC device structure
@@ -87,9 +90,14 @@ int cros_ec_sensors_read_cmd(struct iio_dev *indio_dev, unsigned long scan_mask,
 
 struct platform_device;
 int cros_ec_sensors_core_init(struct platform_device *pdev,
-			      struct iio_dev *indio_dev, bool physical_device);
+			      struct iio_dev *indio_dev, bool physical_device,
+			      cros_ec_sensors_capture_t trigger_capture,
+			      cros_ec_sensorhub_push_data_cb_t push_data);
 
 irqreturn_t cros_ec_sensors_capture(int irq, void *p);
+int cros_ec_sensors_push_data(struct iio_dev *indio_dev,
+			      s16 *data,
+			      s64 timestamp);
 
 int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *st,
 				 u16 opt_length);
-- 
2.24.0.432.g9d3f5f5b63-goog


  parent reply index

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-15  9:33 [PATCH v5 00/18] cros_ec: Add sensorhub driver and FIFO processing Gwendal Grignou
2019-11-15  9:33 ` [PATCH v5 01/18] mfd: cros_ec: Add sensor_count and make check_features public Gwendal Grignou
2019-11-15  9:33 ` [PATCH v5 02/18] platform: cros_ec: Add cros_ec_sensor_hub driver Gwendal Grignou
2019-11-16 11:32   ` Jonathan Cameron
2019-11-15  9:33 ` [PATCH v5 03/18] platform/mfd:iio: cros_ec: Register sensor through sensorhub Gwendal Grignou
2019-11-15  9:33 ` [PATCH v5 04/18] platform: chrome: cros-ec: record event timestamp in the hard irq Gwendal Grignou
2019-11-15  9:33 ` [PATCH v5 05/18] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 06/18] platform: chrome: cros_ec: handle MKBP more events flag Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 07/18] Revert "Input: cros_ec_keyb - add back missing mask for event_type" Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 08/18] Revert "Input: cros_ec_keyb: mask out extra flags in event_type" Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 09/18] platform: chrome: sensorhub: Add FIFO support Gwendal Grignou
2019-11-16 11:39   ` Jonathan Cameron
2019-11-22 11:35   ` Enric Balletbo i Serra
2020-03-24 20:31     ` Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 10/18] platform: chrome: sensorhub: Add code to spread timestmap Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 11/18] platform: chrome: sensorhub: Add median filter Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 12/18] iio: cros_ec: Move function description to .c file Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 13/18] iio: expose iio_device_set_clock Gwendal Grignou
2019-11-16 11:42   ` Jonathan Cameron
2019-11-15  9:34 ` Gwendal Grignou [this message]
2019-11-16 11:44   ` [PATCH v5 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO Jonathan Cameron
2019-11-15  9:34 ` [PATCH v5 15/18] iio: cros_ec: Remove pm function Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 16/18] iio: cros_ec: Expose hwfifo_timeout Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 17/18] iio: cros_ec: Report hwfifo_watermark_max Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 18/18] iio: cros_ec: Use Hertz as unit for sampling frequency Gwendal Grignou
2019-11-22 11:11 ` [PATCH v5 00/18] cros_ec: Add sensorhub driver and FIFO processing Enric Balletbo i Serra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191115093412.144922-15-gwendal@chromium.org \
    --to=gwendal@chromium.org \
    --cc=bleung@chromium.org \
    --cc=briannorris@chromium.org \
    --cc=dianders@chromium.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=enric.balletbo@collabora.com \
    --cc=fabien.lahoudere@collabora.com \
    --cc=groeck@chromium.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git