Linux Input Archive on lore.kernel.org
 help / color / Atom feed
From: Gwendal Grignou <gwendal@chromium.org>
To: dmitry.torokhov@gmail.com, groeck@chromium.org,
	briannorris@chromium.org, jic23@kernel.org, knaack.h@gmx.de,
	lars@metafoo.de, pmeerw@pmeerw.net, lee.jones@linaro.org,
	bleung@chromium.org, enric.balletbo@collabora.com,
	dianders@chromium.org, fabien.lahoudere@collabora.com
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
	linux-input@vger.kernel.org,
	Gwendal Grignou <gwendal@chromium.org>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PATCH v5 16/18] iio: cros_ec: Expose hwfifo_timeout
Date: Fri, 15 Nov 2019 01:34:10 -0800
Message-ID: <20191115093412.144922-17-gwendal@chromium.org> (raw)
In-Reply-To: <20191115093412.144922-1-gwendal@chromium.org>

Expose EC minimal interrupt period through buffer/hwfifo_timeout:
- Maximal timeout is limited to 65s.
- When timeout for all sensors is set to 0, EC will not send events,
  even if the sensor sampling rate is greater than 0.

Rename frequency to sampling_frequency to match IIO ABI.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
Changes in v5:
  Added ack.
Changes in v4:
- Check patch with --strict option
    Alignement
No changes in v3.
Changes in v2:
- Register fifo_attributes in sensors drivers that previously advertise
  that feature.

 .../common/cros_ec_sensors/cros_ec_sensors.c  |  3 +-
 .../cros_ec_sensors/cros_ec_sensors_core.c    | 95 ++++++++++++++-----
 drivers/iio/light/cros_ec_light_prox.c        |  5 +-
 drivers/iio/pressure/cros_ec_baro.c           |  5 +-
 .../linux/iio/common/cros_ec_sensors_core.h   |  4 +-
 5 files changed, 82 insertions(+), 30 deletions(-)

diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
index 9d0b8ad7a0a5..6f511f9067d9 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -237,6 +237,8 @@ static int cros_ec_sensors_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	iio_buffer_set_attrs(indio_dev->buffer, cros_ec_sensor_fifo_attributes);
+
 	indio_dev->info = &ec_sensors_info;
 	state = iio_priv(indio_dev);
 	for (channel = state->channels, i = CROS_EC_SENSOR_X;
@@ -248,7 +250,6 @@ static int cros_ec_sensors_probe(struct platform_device *pdev)
 			BIT(IIO_CHAN_INFO_CALIBSCALE);
 		channel->info_mask_shared_by_all =
 			BIT(IIO_CHAN_INFO_SCALE) |
-			BIT(IIO_CHAN_INFO_FREQUENCY) |
 			BIT(IIO_CHAN_INFO_SAMP_FREQ);
 		channel->info_mask_shared_by_all_available =
 			BIT(IIO_CHAN_INFO_SAMP_FREQ);
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index a34f6295fe34..eca39ff9381a 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -11,6 +11,7 @@
 #include <linux/iio/common/cros_ec_sensors_core.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/kfifo_buf.h>
+#include <linux/iio/sysfs.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
 #include <linux/kernel.h>
@@ -84,6 +85,77 @@ static void get_default_min_max_freq(enum motionsensor_type type,
 	}
 }
 
+static int cros_ec_sensor_set_ec_rate(struct cros_ec_sensors_core_state *st,
+				      int rate)
+{
+	int ret;
+
+	if (rate > U16_MAX)
+		rate = U16_MAX;
+
+	mutex_lock(&st->cmd_lock);
+	st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+	st->param.ec_rate.data = rate;
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	mutex_unlock(&st->cmd_lock);
+	return ret;
+}
+
+static ssize_t cros_ec_sensor_set_report_latency(struct device *dev,
+						 struct device_attribute *attr,
+						 const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int integer, fract, ret;
+	int latency;
+
+	ret = iio_str_to_fixpoint(buf, 100000, &integer, &fract);
+	if (ret)
+		return ret;
+
+	/* EC rate is in ms. */
+	latency = integer * 1000 + fract / 1000;
+	ret = cros_ec_sensor_set_ec_rate(st, latency);
+	if (ret < 0)
+		return ret;
+
+	return len;
+}
+
+static ssize_t cros_ec_sensor_get_report_latency(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int latency, ret;
+
+	mutex_lock(&st->cmd_lock);
+	st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+	st->param.ec_rate.data = EC_MOTION_SENSE_NO_VALUE;
+
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	latency = st->resp->ec_rate.ret;
+	mutex_unlock(&st->cmd_lock);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d.%06u\n",
+		       latency / 1000,
+		       (latency % 1000) * 1000);
+}
+
+static IIO_DEVICE_ATTR(hwfifo_timeout, 0644,
+		       cros_ec_sensor_get_report_latency,
+		       cros_ec_sensor_set_report_latency, 0);
+
+const struct attribute *cros_ec_sensor_fifo_attributes[] = {
+	&iio_dev_attr_hwfifo_timeout.dev_attr.attr,
+	NULL,
+};
+EXPORT_SYMBOL_GPL(cros_ec_sensor_fifo_attributes);
+
 int cros_ec_sensors_push_data(struct iio_dev *indio_dev,
 			      s16 *data,
 			      s64 timestamp)
@@ -616,18 +688,6 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
-		st->param.ec_rate.data =
-			EC_MOTION_SENSE_NO_VALUE;
-
-		ret = cros_ec_motion_send_host_cmd(st, 0);
-		if (ret)
-			break;
-
-		*val = st->resp->ec_rate.ret;
-		ret = IIO_VAL_INT;
-		break;
-	case IIO_CHAN_INFO_FREQUENCY:
 		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
 		st->param.sensor_odr.data =
 			EC_MOTION_SENSE_NO_VALUE;
@@ -697,7 +757,7 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
 	int ret;
 
 	switch (mask) {
-	case IIO_CHAN_INFO_FREQUENCY:
+	case IIO_CHAN_INFO_SAMP_FREQ:
 		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
 		st->param.sensor_odr.data = val;
 
@@ -706,15 +766,6 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
 
 		ret = cros_ec_motion_send_host_cmd(st, 0);
 		break;
-	case IIO_CHAN_INFO_SAMP_FREQ:
-		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
-		st->param.ec_rate.data = val;
-
-		ret = cros_ec_motion_send_host_cmd(st, 0);
-		if (ret)
-			break;
-		st->curr_sampl_freq = val;
-		break;
 	default:
 		ret = -EINVAL;
 		break;
diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
index ccdc6d8958c6..863d01994aae 100644
--- a/drivers/iio/light/cros_ec_light_prox.c
+++ b/drivers/iio/light/cros_ec_light_prox.c
@@ -184,6 +184,8 @@ static int cros_ec_light_prox_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	iio_buffer_set_attrs(indio_dev->buffer, cros_ec_sensor_fifo_attributes);
+
 	indio_dev->info = &cros_ec_light_prox_info;
 	state = iio_priv(indio_dev);
 	state->core.type = state->core.resp->info.type;
@@ -192,8 +194,7 @@ static int cros_ec_light_prox_probe(struct platform_device *pdev)
 
 	/* Common part */
 	channel->info_mask_shared_by_all =
-		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
-		BIT(IIO_CHAN_INFO_FREQUENCY);
+		BIT(IIO_CHAN_INFO_SAMP_FREQ);
 	channel->info_mask_shared_by_all_available =
 		BIT(IIO_CHAN_INFO_SAMP_FREQ);
 	channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
index e1c86b22676c..0dee943f955e 100644
--- a/drivers/iio/pressure/cros_ec_baro.c
+++ b/drivers/iio/pressure/cros_ec_baro.c
@@ -140,6 +140,8 @@ static int cros_ec_baro_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	iio_buffer_set_attrs(indio_dev->buffer, cros_ec_sensor_fifo_attributes);
+
 	indio_dev->info = &cros_ec_baro_info;
 	state = iio_priv(indio_dev);
 	state->core.type = state->core.resp->info.type;
@@ -149,8 +151,7 @@ static int cros_ec_baro_probe(struct platform_device *pdev)
 	channel->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
 	channel->info_mask_shared_by_all =
 		BIT(IIO_CHAN_INFO_SCALE) |
-		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
-		BIT(IIO_CHAN_INFO_FREQUENCY);
+		BIT(IIO_CHAN_INFO_SAMP_FREQ);
 	channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
 	channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
 	channel->scan_type.shift = 0;
diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
index 96ea4551945e..5b0acc14c891 100644
--- a/include/linux/iio/common/cros_ec_sensors_core.h
+++ b/include/linux/iio/common/cros_ec_sensors_core.h
@@ -50,7 +50,6 @@ typedef irqreturn_t (*cros_ec_sensors_capture_t)(int irq, void *p);
  *				the timestamp. The timestamp is always last and
  *				is always 8-byte aligned.
  * @read_ec_sensors_data:	function used for accessing sensors values
- * @cuur_sampl_freq:		current sampling period
  */
 struct cros_ec_sensors_core_state {
 	struct cros_ec_device *ec;
@@ -73,8 +72,6 @@ struct cros_ec_sensors_core_state {
 	int (*read_ec_sensors_data)(struct iio_dev *indio_dev,
 				    unsigned long scan_mask, s16 *data);
 
-	int curr_sampl_freq;
-
 	/* Table of known available frequencies : 0, Min and Max in mHz */
 	int frequencies[3];
 };
@@ -116,5 +113,6 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
 
 /* List of extended channel specification for all sensors */
 extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[];
+extern const struct attribute *cros_ec_sensor_fifo_attributes[];
 
 #endif  /* __CROS_EC_SENSORS_CORE_H */
-- 
2.24.0.432.g9d3f5f5b63-goog


  parent reply index

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-15  9:33 [PATCH v5 00/18] cros_ec: Add sensorhub driver and FIFO processing Gwendal Grignou
2019-11-15  9:33 ` [PATCH v5 01/18] mfd: cros_ec: Add sensor_count and make check_features public Gwendal Grignou
2019-11-15  9:33 ` [PATCH v5 02/18] platform: cros_ec: Add cros_ec_sensor_hub driver Gwendal Grignou
2019-11-16 11:32   ` Jonathan Cameron
2019-11-15  9:33 ` [PATCH v5 03/18] platform/mfd:iio: cros_ec: Register sensor through sensorhub Gwendal Grignou
2019-11-15  9:33 ` [PATCH v5 04/18] platform: chrome: cros-ec: record event timestamp in the hard irq Gwendal Grignou
2019-11-15  9:33 ` [PATCH v5 05/18] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 06/18] platform: chrome: cros_ec: handle MKBP more events flag Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 07/18] Revert "Input: cros_ec_keyb - add back missing mask for event_type" Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 08/18] Revert "Input: cros_ec_keyb: mask out extra flags in event_type" Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 09/18] platform: chrome: sensorhub: Add FIFO support Gwendal Grignou
2019-11-16 11:39   ` Jonathan Cameron
2019-11-22 11:35   ` Enric Balletbo i Serra
2020-03-24 20:31     ` Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 10/18] platform: chrome: sensorhub: Add code to spread timestmap Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 11/18] platform: chrome: sensorhub: Add median filter Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 12/18] iio: cros_ec: Move function description to .c file Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 13/18] iio: expose iio_device_set_clock Gwendal Grignou
2019-11-16 11:42   ` Jonathan Cameron
2019-11-15  9:34 ` [PATCH v5 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO Gwendal Grignou
2019-11-16 11:44   ` Jonathan Cameron
2019-11-15  9:34 ` [PATCH v5 15/18] iio: cros_ec: Remove pm function Gwendal Grignou
2019-11-15  9:34 ` Gwendal Grignou [this message]
2019-11-15  9:34 ` [PATCH v5 17/18] iio: cros_ec: Report hwfifo_watermark_max Gwendal Grignou
2019-11-15  9:34 ` [PATCH v5 18/18] iio: cros_ec: Use Hertz as unit for sampling frequency Gwendal Grignou
2019-11-22 11:11 ` [PATCH v5 00/18] cros_ec: Add sensorhub driver and FIFO processing Enric Balletbo i Serra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191115093412.144922-17-gwendal@chromium.org \
    --to=gwendal@chromium.org \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=bleung@chromium.org \
    --cc=briannorris@chromium.org \
    --cc=dianders@chromium.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=enric.balletbo@collabora.com \
    --cc=fabien.lahoudere@collabora.com \
    --cc=groeck@chromium.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git