Linux Input Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4] input: keyboard: snvs_pwrkey: Send key events for i.MX6 S, DL and Q
@ 2019-11-25 16:12 Robin van der Gracht
  2019-11-25 21:13 ` Dmitry Torokhov
  0 siblings, 1 reply; 2+ messages in thread
From: Robin van der Gracht @ 2019-11-25 16:12 UTC (permalink / raw)
  To: Dmitry Torokhov
  Cc: linux-input @ vger . kernel . org,
	linux-kernel @ vger . kernel . org, RobinGong,
	Pengutronix Kernel Team, Marco Felsch, Shawn Guo, Adam Ford,
	linux-arm-kernel @ lists . infradead . org, Robin van der Gracht

The first generation i.MX6 processors does not send an interrupt when the
power key is pressed. It sends a power down request interrupt if the key is
released before a hard shutdown (5 second press). This should allow
software to bring down the SoC safely.

For this driver to work as a regular power key with the older SoCs, we need
to send a keypress AND release when we get the power down request irq.

Signed-off-by: Robin van der Gracht <robin@protonic.nl>
---

Changes v3 -> v4:
 * The key release irq handler is now emitting the press and release
   events directly, instead of the debounce timer handler.

 drivers/input/keyboard/Kconfig       |  2 +-
 drivers/input/keyboard/snvs_pwrkey.c | 28 +++++++++++++++++++++++++---
 2 files changed, 26 insertions(+), 4 deletions(-)

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 7c4f19dab34f..937e58da5ce1 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -436,7 +436,7 @@ config KEYBOARD_SNVS_PWRKEY
 	depends on OF
 	help
 	  This is the snvs powerkey driver for the Freescale i.MX application
-	  processors that are newer than i.MX6 SX.
+	  processors.
 
 	  To compile this driver as a module, choose M here; the
 	  module will be called snvs_pwrkey.
diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
index 5342d8d45f81..4888e137cc5d 100644
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -19,6 +19,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
+#define SNVS_HPVIDR1_REG 0xF8
 #define SNVS_LPSR_REG	0x4C	/* LP Status Register */
 #define SNVS_LPCR_REG	0x38	/* LP Control Register */
 #define SNVS_HPSR_REG	0x14
@@ -37,6 +38,7 @@ struct pwrkey_drv_data {
 	int wakeup;
 	struct timer_list check_timer;
 	struct input_dev *input;
+	u8 minor_rev;
 };
 
 static void imx_imx_snvs_check_for_events(struct timer_list *t)
@@ -67,13 +69,29 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
 {
 	struct platform_device *pdev = dev_id;
 	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+	struct input_dev *input = pdata->input;
 	u32 lp_status;
 
-	pm_wakeup_event(pdata->input->dev.parent, 0);
+	pm_wakeup_event(input->dev.parent, 0);
 
 	regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
-	if (lp_status & SNVS_LPSR_SPO)
-		mod_timer(&pdata->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
+	if (lp_status & SNVS_LPSR_SPO) {
+		if (pdata->minor_rev == 0) {
+			/*
+			 * The first generation i.MX6 SoCs only sends an
+			 * interrupt on button release. To mimic power-key
+			 * usage, we'll prepend a press event.
+			 */
+			input_report_key(input, pdata->keycode, 1);
+			input_sync(input);
+			input_report_key(input, pdata->keycode, 0);
+			input_sync(input);
+			pm_relax(input->dev.parent);
+		} else {
+			mod_timer(&pdata->check_timer,
+			          jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
+		}
+	}
 
 	/* clear SPO status */
 	regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
@@ -94,6 +112,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 	struct input_dev *input = NULL;
 	struct device_node *np;
 	int error;
+	u32 vid;
 
 	/* Get SNVS register Page */
 	np = pdev->dev.of_node;
@@ -123,6 +142,9 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	regmap_read(pdata->snvs, SNVS_HPVIDR1_REG, &vid);
+	pdata->minor_rev = vid & 0xff;
+
 	regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN, SNVS_LPCR_DEP_EN);
 
 	/* clear the unexpected interrupt before driver ready */
-- 
2.20.1


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH v4] input: keyboard: snvs_pwrkey: Send key events for i.MX6 S, DL and Q
  2019-11-25 16:12 [PATCH v4] input: keyboard: snvs_pwrkey: Send key events for i.MX6 S, DL and Q Robin van der Gracht
@ 2019-11-25 21:13 ` Dmitry Torokhov
  0 siblings, 0 replies; 2+ messages in thread
From: Dmitry Torokhov @ 2019-11-25 21:13 UTC (permalink / raw)
  To: Robin van der Gracht
  Cc: linux-input @ vger . kernel . org,
	linux-kernel @ vger . kernel . org, RobinGong,
	Pengutronix Kernel Team, Marco Felsch, Shawn Guo, Adam Ford,
	linux-arm-kernel @ lists . infradead . org

On Mon, Nov 25, 2019 at 05:12:10PM +0100, Robin van der Gracht wrote:
> The first generation i.MX6 processors does not send an interrupt when the
> power key is pressed. It sends a power down request interrupt if the key is
> released before a hard shutdown (5 second press). This should allow
> software to bring down the SoC safely.
> 
> For this driver to work as a regular power key with the older SoCs, we need
> to send a keypress AND release when we get the power down request irq.
> 
> Signed-off-by: Robin van der Gracht <robin@protonic.nl>

Applied, thank you.

> ---
> 
> Changes v3 -> v4:
>  * The key release irq handler is now emitting the press and release
>    events directly, instead of the debounce timer handler.
> 
>  drivers/input/keyboard/Kconfig       |  2 +-
>  drivers/input/keyboard/snvs_pwrkey.c | 28 +++++++++++++++++++++++++---
>  2 files changed, 26 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 7c4f19dab34f..937e58da5ce1 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -436,7 +436,7 @@ config KEYBOARD_SNVS_PWRKEY
>  	depends on OF
>  	help
>  	  This is the snvs powerkey driver for the Freescale i.MX application
> -	  processors that are newer than i.MX6 SX.
> +	  processors.
>  
>  	  To compile this driver as a module, choose M here; the
>  	  module will be called snvs_pwrkey.
> diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
> index 5342d8d45f81..4888e137cc5d 100644
> --- a/drivers/input/keyboard/snvs_pwrkey.c
> +++ b/drivers/input/keyboard/snvs_pwrkey.c
> @@ -19,6 +19,7 @@
>  #include <linux/mfd/syscon.h>
>  #include <linux/regmap.h>
>  
> +#define SNVS_HPVIDR1_REG 0xF8
>  #define SNVS_LPSR_REG	0x4C	/* LP Status Register */
>  #define SNVS_LPCR_REG	0x38	/* LP Control Register */
>  #define SNVS_HPSR_REG	0x14
> @@ -37,6 +38,7 @@ struct pwrkey_drv_data {
>  	int wakeup;
>  	struct timer_list check_timer;
>  	struct input_dev *input;
> +	u8 minor_rev;
>  };
>  
>  static void imx_imx_snvs_check_for_events(struct timer_list *t)
> @@ -67,13 +69,29 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
>  {
>  	struct platform_device *pdev = dev_id;
>  	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
> +	struct input_dev *input = pdata->input;
>  	u32 lp_status;
>  
> -	pm_wakeup_event(pdata->input->dev.parent, 0);
> +	pm_wakeup_event(input->dev.parent, 0);
>  
>  	regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
> -	if (lp_status & SNVS_LPSR_SPO)
> -		mod_timer(&pdata->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
> +	if (lp_status & SNVS_LPSR_SPO) {
> +		if (pdata->minor_rev == 0) {
> +			/*
> +			 * The first generation i.MX6 SoCs only sends an
> +			 * interrupt on button release. To mimic power-key
> +			 * usage, we'll prepend a press event.
> +			 */
> +			input_report_key(input, pdata->keycode, 1);
> +			input_sync(input);
> +			input_report_key(input, pdata->keycode, 0);
> +			input_sync(input);
> +			pm_relax(input->dev.parent);
> +		} else {
> +			mod_timer(&pdata->check_timer,
> +			          jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
> +		}
> +	}
>  
>  	/* clear SPO status */
>  	regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
> @@ -94,6 +112,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
>  	struct input_dev *input = NULL;
>  	struct device_node *np;
>  	int error;
> +	u32 vid;
>  
>  	/* Get SNVS register Page */
>  	np = pdev->dev.of_node;
> @@ -123,6 +142,9 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
>  		return -EINVAL;
>  	}
>  
> +	regmap_read(pdata->snvs, SNVS_HPVIDR1_REG, &vid);
> +	pdata->minor_rev = vid & 0xff;
> +
>  	regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN, SNVS_LPCR_DEP_EN);
>  
>  	/* clear the unexpected interrupt before driver ready */
> -- 
> 2.20.1
> 

-- 
Dmitry

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-25 16:12 [PATCH v4] input: keyboard: snvs_pwrkey: Send key events for i.MX6 S, DL and Q Robin van der Gracht
2019-11-25 21:13 ` Dmitry Torokhov

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git