Linux Input Archive on lore.kernel.org
 help / color / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: robh+dt@kernel.org, andriy.shevchenko@linux.intel.com,
	bparrot@ti.com, andy.shevchenko@gmail.com,
	simon.budig@kernelconcepts.de, hdegoede@redhat.com,
	fcooper@ti.com, mripard@kernel.org,
	alexandre.belloni@bootlin.com, shawnguo@kernel.org,
	devicetree@vger.kernel.org, kernel@pengutronix.de,
	linux-input@vger.kernel.org
Subject: Re: [PATCH v2 5/5] Input: edt-ft5x06 - improve power management operations
Date: Mon, 2 Dec 2019 10:04:23 -0800
Message-ID: <20191202180423.GD50317@dtor-ws> (raw)
In-Reply-To: <20191127120948.22251-6-m.felsch@pengutronix.de>

On Wed, Nov 27, 2019 at 01:09:48PM +0100, Marco Felsch wrote:
> It is possible to bring the device into a deep sleep state. To exit this
> state the reset or wakeup pin must be toggeled as documented in [1].
> Because of the poor documentation I used the several downstream kernels
> [2] and other applications notes [3] to indentify the related registers.
> 
> Furthermore I added the support to disable the device completely. This is
> the most effective power-saving mechanism. Disabling the device don't
> change the suspend logic because the hibernate mode needs a hardware
> reset anyway.
> 
> [1] https://www.newhavendisplay.com/appnotes/datasheets/touchpanel/FT5x26.pdf
> [2] https://github.com/linux-sunxi/linux-sunxi/blob/sunxi-3.4/drivers/input/touchscreen/ft5x_ts.c
>     https://github.com/Pablito2020/focaltech-touch-driver/blob/master/ft5336_driver.c
> [3] https://www.newhavendisplay.com/appnotes/datasheets/touchpanel/FT5x16_registers.pdf
> 
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
> v2:
> - adapt commit message
> - don't return errors during suspend/resume
> - replace dev_err() by dev_warn()
> - add support to disable the regulator too
> 
>  drivers/input/touchscreen/edt-ft5x06.c | 49 ++++++++++++++++++++++++--
>  1 file changed, 47 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> index 8d2ec7947f0e..0bdd3440f684 100644
> --- a/drivers/input/touchscreen/edt-ft5x06.c
> +++ b/drivers/input/touchscreen/edt-ft5x06.c
> @@ -39,6 +39,9 @@
>  #define WORK_REGISTER_NUM_X		0x33
>  #define WORK_REGISTER_NUM_Y		0x34
>  
> +#define PMOD_REGISTER_ACTIVE		0x00
> +#define PMOD_REGISTER_HIBERNATE		0x03
> +
>  #define M09_REGISTER_THRESHOLD		0x80
>  #define M09_REGISTER_GAIN		0x92
>  #define M09_REGISTER_OFFSET		0x93
> @@ -54,6 +57,7 @@
>  
>  #define WORK_REGISTER_OPMODE		0x3c
>  #define FACTORY_REGISTER_OPMODE		0x01
> +#define PMOD_REGISTER_OPMODE		0xa5
>  
>  #define TOUCH_EVENT_DOWN		0x00
>  #define TOUCH_EVENT_UP			0x01
> @@ -1235,9 +1239,29 @@ static int edt_ft5x06_ts_remove(struct i2c_client *client)
>  static int __maybe_unused edt_ft5x06_ts_suspend(struct device *dev)
>  {
>  	struct i2c_client *client = to_i2c_client(dev);
> +	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
> +	int ret;
>  
> -	if (device_may_wakeup(dev))
> +	if (device_may_wakeup(dev)) {
>  		enable_irq_wake(client->irq);

Can we start with preliminary patch dropping calls to enable_irq_wake()
and disable_irq_wake() as device/PM core will tale care of configuring
wake irqs properly for us, since we are now allowing I2C core to mark
the interrupt as wake IRQ.

So we need to do:

	if (device_may_wakeup(dev))
		return 0;

	<execute power down sequence>

Thanks.

-- 
Dmitry

  parent reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-27 12:09 [PATCH v2 0/5] EDT-FT5x06 improvements Marco Felsch
2019-11-27 12:09 ` [PATCH v2 1/5] Input: edt-ft5x06: work around first register access error Marco Felsch
2019-12-02 17:58   ` Dmitry Torokhov
2019-12-03  8:15     ` Marco Felsch
2019-11-27 12:09 ` [PATCH v2 2/5] Input: edt-ft5x06 - alphabetical include reorder Marco Felsch
2019-11-27 12:09 ` [PATCH v2 3/5] dt-bindings: Input: edt-ft5x06 - document wakeup-source capability Marco Felsch
2019-12-05 21:15   ` Rob Herring
2019-11-27 12:09 ` [PATCH v2 4/5] Input: edt-ft5x06 - make wakeup-source switchable Marco Felsch
2019-12-02 18:00   ` Dmitry Torokhov
2019-12-10  8:36     ` Marco Felsch
2019-11-27 12:09 ` [PATCH v2 5/5] Input: edt-ft5x06 - improve power management operations Marco Felsch
2019-11-27 12:59   ` Andy Shevchenko
2019-11-27 13:06     ` Marco Felsch
2019-11-27 14:32       ` Andy Shevchenko
2019-11-27 17:25         ` Marco Felsch
2019-11-27 18:06           ` Andy Shevchenko
2019-12-02 18:04   ` Dmitry Torokhov [this message]
2019-12-10  8:43     ` Marco Felsch
2019-11-27 17:10 ` [PATCH v2 0/5] EDT-FT5x06 improvements Andy Shevchenko
2019-11-27 17:14 ` Andy Shevchenko
2019-11-27 17:25   ` Marco Felsch

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191202180423.GD50317@dtor-ws \
    --to=dmitry.torokhov@gmail.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=bparrot@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fcooper@ti.com \
    --cc=hdegoede@redhat.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-input@vger.kernel.org \
    --cc=m.felsch@pengutronix.de \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=simon.budig@kernelconcepts.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git