Re: [PATCH 4/7] dt-bindings: Input: introduce new clock vibrator bindings

[Brian Masney <masneyb@onstation.org>]

On Thu, Dec 05, 2019 at 07:56:10AM -0600, Rob Herring wrote:
> On Wed, Dec 4, 2019 at 6:25 PM Brian Masney <masneyb@onstation.org> wrote:
> >
> > Add support for clock-based vibrator devices where the speed can be
> > controlled by changing the duty cycle.
> >
> > Signed-off-by: Brian Masney <masneyb@onstation.org>
> > ---
> >  .../bindings/input/clk-vibrator.yaml          | 60 +++++++++++++++++++
> >  1 file changed, 60 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/input/clk-vibrator.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/input/clk-vibrator.yaml b/Documentation/devicetree/bindings/input/clk-vibrator.yaml
> > new file mode 100644
> > index 000000000000..2103a5694fad
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/clk-vibrator.yaml
> > @@ -0,0 +1,60 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/bindings/input/clk-vibrator.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Clock vibrator
> > +
> > +maintainers:
> > +  - Brian Masney <masneyb@onstation.org>
> > +
> > +description: |
> > +  Support for clock-based vibrator devices where the speed can be controlled
> > +  by changing the duty cycle.
> > +
> > +properties:
> > +  compatible:
> > +    const: clk-vibrator
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    description: output clock that controls the speed
> > +    items:
> > +      - const: core
> 
> No point in making up a name when there's only one clock, so drop.

OK, will do.

> 
> > +
> > +  clock-frequency: true
> 
> Given the frequency is variable, what does this mean in this case?

The clock frequency is fixed. The duty cycle is what's variable.

Brian



> 
> > +  enable-gpios:
> > +    maxItems: 1
> > +
> > +  vcc-supply:
> > +    description: Regulator that provides power
> > +
> > +required:
> > +  - compatible
> > +  - clocks
> > +  - clock-names
> > +  - clock-frequency
> 
> Add:
> 
> additionalProperties: false
> 
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    vibrator {
> > +        compatible = "clk-vibrator";
> > +
> > +        vcc-supply = <&pm8941_l19>;
> > +
> > +        clocks = <&mmcc CAMSS_GP1_CLK>;
> > +        clock-names = "core";
> > +        clock-frequency = <24000>;
> > +
> > +        enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
> > +
> > +        pinctrl-names = "default";
> > +        pinctrl-0 = <&vibrator_pin>;
> > +    };
> > --
> > 2.21.0
> >