Linux Input Archive on lore.kernel.org
 help / color / Atom feed
From: Ikjoon Jang <ikjn@chromium.org>
To: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Gwendal Grignou <gwendal@chromium.org>,
	Lee Jones <lee.jones@linaro.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Benson Leung <bleung@chromium.org>,
	Enric Balletbo i Serra <enric.balletbo@collabora.com>,
	Guenter Roeck <groeck@chromium.org>,
	Jiri Kosina <jikos@kernel.org>,
	Benjamin Tissoires <benjamin.tissoires@redhat.com>,
	Nicolas Boitchat <drinkcat@chromium.org>,
	linux-input@vger.kernel.org, Ikjoon Jang <ikjn@chromium.org>
Subject: [PATCH] dt-bindings: mfd: Convert ChromeOS EC bindings to json-schema
Date: Thu, 16 Jan 2020 18:13:16 +0800
Message-ID: <20200116101316.12108-1-ikjn@chromium.org> (raw)
In-Reply-To: <20200114021934.178057-1-ikjn@chromium.org>

Convert the ChromeOS EC bindings to json-schema.

Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
---
 .../devicetree/bindings/mfd/cros-ec.txt       |  76 ------------
 .../devicetree/bindings/mfd/cros-ec.yaml      | 111 ++++++++++++++++++
 2 files changed, 111 insertions(+), 76 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/cros-ec.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/cros-ec.yaml

diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
deleted file mode 100644
index 4860eabd0f72..000000000000
--- a/Documentation/devicetree/bindings/mfd/cros-ec.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-ChromeOS Embedded Controller
-
-Google's ChromeOS EC is a Cortex-M device which talks to the AP and
-implements various function such as keyboard and battery charging.
-
-The EC can be connect through various means (I2C, SPI, LPC, RPMSG) and the
-compatible string used depends on the interface. Each connection method has
-its own driver which connects to the top level interface-agnostic EC driver.
-Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to
-the top-level driver.
-
-Required properties (I2C):
-- compatible: "google,cros-ec-i2c"
-- reg: I2C slave address
-
-Required properties (SPI):
-- compatible: "google,cros-ec-spi"
-- reg: SPI chip select
-
-Required properties (RPMSG):
-- compatible: "google,cros-ec-rpmsg"
-
-Optional properties (SPI):
-- google,cros-ec-spi-pre-delay: Some implementations of the EC need a little
-  time to wake up from sleep before they can receive SPI transfers at a high
-  clock rate. This property specifies the delay, in usecs, between the
-  assertion of the CS to the start of the first clock pulse.
-- google,cros-ec-spi-msg-delay: Some implementations of the EC require some
-  additional processing time in order to accept new transactions. If the delay
-  between transactions is not long enough the EC may not be able to respond
-  properly to subsequent transactions and cause them to hang. This property
-  specifies the delay, in usecs, introduced between transactions to account
-  for the time required by the EC to get back into a state in which new data
-  can be accepted.
-
-Required properties (LPC):
-- compatible: "google,cros-ec-lpc"
-- reg: List of (IO address, size) pairs defining the interface uses
-
-Optional properties (all):
-- google,has-vbc-nvram: Some implementations of the EC include a small
-  nvram space used to store verified boot context data. This boolean flag
-  is used to specify whether this nvram is present or not.
-
-Example for I2C:
-
-i2c@12ca0000 {
-	cros-ec@1e {
-		reg = <0x1e>;
-		compatible = "google,cros-ec-i2c";
-		interrupts = <14 0>;
-		interrupt-parent = <&wakeup_eint>;
-		wakeup-source;
-	};
-
-
-Example for SPI:
-
-spi@131b0000 {
-	ec@0 {
-		compatible = "google,cros-ec-spi";
-		reg = <0x0>;
-		interrupts = <14 0>;
-		interrupt-parent = <&wakeup_eint>;
-		wakeup-source;
-		spi-max-frequency = <5000000>;
-		controller-data {
-		cs-gpio = <&gpf0 3 4 3 0>;
-		samsung,spi-cs;
-		samsung,spi-feedback-delay = <2>;
-		};
-	};
-};
-
-
-Example for LPC is not supplied as it is not yet implemented.
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.yaml b/Documentation/devicetree/bindings/mfd/cros-ec.yaml
new file mode 100644
index 000000000000..633fa32c5746
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cros-ec.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/cros-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS Embedded Controller
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+  - Guenter Roeck <groeck@chromium.org>
+
+description: |
+  Google's ChromeOS EC is a microcontroller which talks to the AP and
+  implements various functions such as keyboard and battery charging.
+  The EC can be connected through various interfaces (I2C, SPI, and others)
+  and the compatible string specifies which interface is being used.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          For implementations of the EC is connected through I2C.
+        const: google,cros-ec-i2c
+      - description:
+          For implementations of the EC is connected through SPI.
+        const: google,cros-ec-spi
+      - description:
+          For implementations of the EC is connected through RPMSG.
+        const: google,cros-ec-rpmsg
+
+  google,has-vbc-nvram:
+    description: |
+      Some implementations of the EC include a small
+      nvram space used to store verified boot context data.
+      This boolean flag is used to specify whether this nvram is
+      present or not.
+    type: boolean
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: google,cros-ec-i2c
+    then:
+      properties:
+        reg:
+          description: I2C slave address
+          maxItems: 1
+      required:
+        - reg
+  - if:
+      properties:
+        compatible:
+          const: google,cros-ec-spi
+    then:
+      properties:
+        reg:
+          description: SPI chip select
+          maxItems: 1
+        google,cros-ec-spi-pre-delay:
+          description: |
+            This property specifies the delay in usecs between the
+            assertion of the CS and the first clock pulse.
+        google,cros-ec-spi-msg-delay:
+          description: |
+            This property specifies the delay in usecs between messages.
+      required:
+        - reg
+
+examples:
+  # Example for I2C
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@1e {
+            compatible = "google,cros-ec-i2c";
+            reg = <0x1e>;
+            interrupts = <6 0>;
+            interrupt-parent = <&gpx1>;
+        };
+    };
+  # Example for SPI
+  - |
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0x0>;
+            google,cros-ec-spi-msg-delay = <30>;
+            interrupts = <99 0>;
+            interrupt-parent = <&gpio7>;
+            spi-max-frequency = <5000000>;
+        };
+    };
+  # Example for RPMSG
+  - |
+    scp0 {
+        cros_ec@0 {
+            compatible = "google,cros-ec-rpmsg";
+        };
+    };
+...
-- 
2.25.0.rc1.283.g88dfdc4193-goog


  parent reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-14  2:19 Ikjoon Jang
2020-01-14 12:58 ` Enric Balletbo i Serra
2020-01-15  9:56   ` Ikjoon Jang
2020-01-16 10:13 ` Ikjoon Jang [this message]
2020-01-16 12:29   ` Enric Balletbo i Serra
2020-01-21  7:47 ` [PATCH v3] " Ikjoon Jang
2020-01-27 15:57   ` Enric Balletbo i Serra
2020-01-27 16:12     ` Rob Herring
2020-01-27 16:25       ` Enric Balletbo i Serra
2020-01-27 16:05   ` Rob Herring

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200116101316.12108-1-ikjn@chromium.org \
    --to=ikjn@chromium.org \
    --cc=benjamin.tissoires@redhat.com \
    --cc=bleung@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=drinkcat@chromium.org \
    --cc=enric.balletbo@collabora.com \
    --cc=groeck@chromium.org \
    --cc=gwendal@chromium.org \
    --cc=jikos@kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-input@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git